2BHS9-YW168G3GPS Module

1 Shenzhen Youwei Communication Co., LTD Signed by Approved by _______ 2 legal notice: First of all, thank you for using this product. If you agree to the following terms, you will receive our support and services. When you have doubts about this, welcome to inquire. If you cannot accept the following terms, please stop using this manual. The ownership of this manual belongs to the dealer. Reves any rights not expressly granted in this manual. The information of the products in the manual cannot be copied, transmitted, distributed, used and leaked from any pictures, forms, data and other information contained in the manual without the prior written permission of the distributor. Reading this document does not, without the prior written consent of the dealer, implicitly, otherwise or otherwise grant the reader any right to use any marking appearing in this document. The storage and use of the product shall be in accordance with the requirements of the product manual, relevant contracts or relevant laws and regulations. The Distributor reserves the right to modify and improve the products described in this manual without prior notice, and also reserves the right to revise or withdraw this manual at any time. If 2 there is any unknown information in this user manual, please consult your agent and dealer in time. Special statement: this product is prohibited from being used for illegal purposes, otherwise, all legal liabilities arising therefrom shall be borne by the user himself. 3 1. Product characteristics ....................................................................... 3 II. Product appearance and accessories .......................................... 3 3. Description of the product structure .......................................... 4 Iv. Product parameters .......................................................................... 5 V. Basic functions of the product ...................................................... 6 VI. Matters needing attention............................................................ 7 7. After-sales service .............................................................................. 8 5V voltage Real-time location and tracking, track playback Ultra small volume Simple installation, do not press the power button, power on that work Built-in backup button battery, power loss is not lost GPS + Beidou + GLONASS triple positioning 4 6 6 GPS Receiver Chip MediaTek GK9051 (Rom Version) Frequency 1575.42 MHz Code C/A Code NMEA 0183 v4.1 Protocol GALILEO L1 open service (with upgrade) Default:GGA,GSA,GSV,RMC Support:VTG,GLL,TXT ublox binary and NMEA Command Available Baud Rate 9,600 bps Channels 66 Tracking:-161dBm Sensitivity Reacquisition:-160dBm ColdStart:-147dBm Cold Start 29 seconds, average Warm Start 28 seconds, average Hot Start 1 second, average HorizontalPosition:Autonomous<2.5maverage, Accuracy SBAS < 2.0m average Velocity: 0.1 m/s Timepulse signal: RMS 30 ns Maximum Altitude 50,000 meter Maximum Velocity 515 m/s(1000 knots) Dynamics 4G Max navigation update rate 1 Hz （Default 1Hz ） String data type NMEA0183 Agreement Street view map A 360-degree no-dead Angle HD map 1. Please pay attention to waterproof for electronic products. 2. The installation position must be covered without electromagnetic wave absorption (such as metal, explosion-proof heat insulation film). 3. Do not touch the equipment with the liquid, or operate it with wet hands. 4. Do not put the equipment into the fire 5. The device may not work when the temperature is below-20°C or above + 60°C. . 6 When the vehicle is in an underground parking lot, tunnel, or garage. And a communication network may appear Blind area cannot monitor the equipment; when the equipment is placed in the above area, the equipment will automatically return to normal work . 7 encounter abnormal situation, please do not repair by yourself. Connect to the non-original accessories or remove the connections between the parts The manufacturer shall not be liable for the damage. 8. The loss caused by human damage and information loss of this product has nothing to do with the company. 9. This product may have electromagnetic interference in some vehicle models and the electrical equipment in the car. 11. Do not make the product to strong impact or vibration, so as not to damage the product, resulting in dysfunction or failure. 12. The normal functional temperature range of this product is-20 degrees C to 65 degrees C, beyond which the temperature range may cause product failure, fire or explosion. 1. This product will enjoy a three-month replacement and a one-year warranty service from the date of shipment. During the warranty period, the equipment is caused by non-human factors or product quality, please contact the dealer in time. 2. The damage caused by the customer's private disassembly or force majeure (such as flood, vehicle accident) shall not be repaired. 3. After the expiration of the warranty, the cost of maintenance materials is charged for the products caused by the use. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a …

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Formates LLC FRN: 0033456468 Contact Name: Abi Aribisala Address: 1400 Hudson St, Hoboken, New Jersey, 07030, USA Telephone No: (646) 598-3676 Email: [email protected] Applicant: Company name: Shenzhen Youwei Communication Co., Ltd Grantee code: 2BHS9 FCC ID: 2BHS9-YW168G3 FRN: 0035723568 Contact Name: Jianny Cai Address: 501, Building A, Building 32 Huimin 1st Road, Guihua Community, Guanlan Street, Longhua District, Shenzhen Telephone: 18566769331 Fax: 18566769331 E-mail: [email protected] [Shenzhen Youwei Communication Co., Ltd] certifies that, as of the date of this filing of the application with the TCB, [Formates LLC] is our designated US agent for service of process for the above referenced FCC ID. [Shantou Chenghai Yaohong Craftwork Co.,Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Formates LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2024/08/19 Applicant’s Name: Jianny Cai US Agent for Service of Process’s Name: Abi Aribisala Title: Manager Title: Project Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Youwei Communication Co., Ltd Grantee code: 2BHS9 FCC ID: 2BHS9-YW168G3 FRN: 0035723568 Contact Name: Jianny Cai Address: 501, Building A, Building 32 Huimin 1st Road, Guihua Community, Guanlan Street, Longhua District, Shenzhen Telephone: 18566769331 Fax: 18566769331 E-mail: [email protected] i. [Shenzhen Youwei Communication Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Youwei Communication Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Youwei Communication Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2024/08/19 Applicant’s Name: Jianny Cai Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Youwei Communication Co., Ltd Product Similarity Declaration Company: Shenzhen Youwei Communication Co., Ltd Address: 501, Building A, Building 32 Huimin 1st Road, Guihua Community, Guanlan Street, Longhua District, Shenzhen Product Name: GPS Module Model Number: YW-168G3, YW-168Z1, YW-168Z3, YW-198Z1, YW-198Z3, YW-198G3, YW-18184G3, YW-18184G1, YW-18184Z1, YW-18184Z3, YW-18182Z1, YW-18182Z3, YW-1010, YW-1612, YW-M36, YW-M37, YW-M38, YW-15134G3, YW-15132G3, YW-28252G3, YW-28252Z3, YW-M800, YW-S770, YW-25254Z3, YW-25254Z1, YW-25254G3, YW-G002, YW-3629, YW-3629, YW- 306, YW-JC03, YW-16162G3, YW-16164G3 FCC Identifier: 2BHS9-YW168G3 We (Shenzhen Youwei Communication Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and appearance color. Client’s signature Name: Jianny Cai Date: 2024-08-19 Title: Manager Signature of applicant:

Shenzhen Youwei Communication Co., Ltd 1/1 Letter of Authorization Company: Shenzhen Youwei Communication Co., Ltd Address: 501, Building A, Building 32 Huimin 1st Road, Guihua Community, Guanlan Street, Longhua District, Shenzhen Product Name: GPS Module Model Number: YW-168G3, YW-168Z1, YW-168Z3, YW-198Z1, YW-198Z3, YW-198G3, YW-18184G3, YW-18184G1, YW-18184Z1, YW-18184Z3, YW-18182Z1, YW-18182Z3, YW-1010, YW-1612, YW-M36, YW-M37, YW-M38, YW-15134G3, YW-15132G3, YW-28252G3, YW-28252Z3, YW-M800, YW-S770, YW-25254Z3, YW-25254Z1, YW-25254G3, YW-G002, YW-3629, YW-3629, YW-306, YW-JC03, YW-16162G3, YW-16164G3 FCC Identifier: 2BHS9-YW168G3 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jianny Cai Date: 2024-08-19 Title: Manager Signature of applicant:

Shenzhen Youwei Communication Co., Ltd 1/1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-08-19 Subject: Request for Confidentiality FCC ID: 2BHS9-YW168G3 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual No ☐ Internal Photos No ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jianny Cai Title: Manager

Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(External Photos) Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※

Size:12*8mm M/N: YW-168G3 FCC ID: 2BHS9-YW168G3 Label location

Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(Internal Photos) Shenzhen DL Testing Technology Co., Ltd. ANT Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※

Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240712029ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 14 FCC TEST REPORT FCC ID: 2BHS9-YW168G3 Applicant: Shenzhen Youwei Communication Co., Ltd Address: 501, Building A, Building 32 Huimin 1st Road, Guihua Community, Guanlan Street, Longhua District, Shenzhen Manufacturer: Shenzhen Youwei Communication Co., Ltd Address: 501, Building A, Building 32 Huimin 1st Road, Guihua Community, Guanlan Street, Longhua District, Shenzhen EUT: GPS Module Trade Mark: Model Number: YW-168G3 YW-168Z1, YW-168Z3, YW-198Z1, YW-198Z3, YW-198G3, YW-18184G3, YW-18184G1, YW-18184Z1, YW-18184Z3, YW-18182Z1, YW-18182Z3, YW-1010, YW-1612, YW-M36, YW-M37, YW-M38, YW-15134G3, YW-15132G3, YW-28252G3, YW-28252Z3, YW-M800, YW-S770, YW-25254Z3, YW-25254Z1, YW-25254G3, YW-G002, YW-3629, YW-3629, YW-306, YW-JC03, YW-16162G3, YW-16164G3 Date of Receipt: Jul. 12, 2024 Test Date: Jul. 12, 2024 - Aug. 02, 2024 Date of Report: Aug. 02, 2024 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China Applicable Standards: FCC Part 15 Subpart B ANSI C63.4:2014 Test Result: Pass Report Number: DL-240712029ER Prepared (Test Engineer): Alisa Song Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240712029ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 14 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ................................................................................................................................... 3 2. TEST SUMMARY ..................................................................................................................... 3 3. GENERAL INFORMATION .................................................................................................... 4 4. TEST INSTRUMENT USED ................................................................................................... 5 5. CONDUCTED EMISSION TEST ........................................................................................... 6 6. RADIATION EMISSION TEST .............................................................................................. 8 7. TEST SEUUP PHOTO .......................................................................................................... 14 8. EUT PHOTOGRAPHS .......................................................................................................... 14 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240712029ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 14 1. VERSION Version No. Date Description 00 Aug. 02, 2024 Original 2. TEST SUMMARY EMC Emission Standard Test Item Limit Result Remark FCC PART 15 B Conducted Emission at power ports Class B N/A Radiated Emission below 1GHz Class B PASS Radiated Emission above 1GHz Class B PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report (2) Test Facility: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No. 8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240712029ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 14 3. GENERAL INFORMATION 3.1 Description of Device (EUT) EUT: GPS Module Trade Mark: Model Number: YW-168G3 YW-168Z1, YW-168Z3, YW-198Z1, YW-198Z3, YW-198G3, YW-18184G3, YW-18184G1, YW-18184Z1, YW-18184Z3, YW-18182Z1, YW-18182Z3, YW-1010, YW-1612, YW-M36, YW-M37, YW-M38, YW-15134G3, YW-15132G3, YW-28252G3, YW-28252Z3, YW-M800, YW-S770, YW-25254Z3, YW-25254Z1, YW-25254G3, YW-G002, YW-3629, YW-3629, YW-306, YW-JC03, YW-16162G3, YW-16164G3 Test Model: YW-168G3 Model Difference: The product's different for model number and appearance color. Power Supply: DC 5V Working Frequency: Above 108MHz NOTE: (1) For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. (2) The EUT’s all information provided by client. 3.2 Tested System Details None. 3.3 Block Diagram of Test Set-up 3.4 Test Mode Description Mode1. On Mode 3.5 Test Auxiliary Equipment Vehicle navigation (Provide by test lab): Model: DLE-015 I/P: DC 12V 3.6 Test Uncertainty Conducted Emission Uncertainty : ±2.56dB Radiated Emission Uncertainty : ±3.24dB DC Mains Vehicle navigation EUT Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240712029ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 14 4. TEST INSTRUMENT USED For Conducted Emission Test (843 Shielded Room) Equipment Manufacturer Model Serial Last Cal. Next Cal. 843 Shielded Room YIHENG 843 Room 843 Nov. 06, 2023 Nov. 05, 2026 EMI Receiver R&S ESR 101421 Nov. 04, 2023 Nov. 03, 2024 LISN R&S ENV216 102417 Nov. 04, 2023 Nov. 03, 2024 Clamp COM-POWER CLA-050 431072 Nov. 04, 2023 Nov. 03, 2024 3-Loop Antenna DAZE ZN30401 13021 Nov. 04, 2023 Nov. 03, 2024 ISN T8 Schwarzbeck NTFM 8158 101135 Nov. 04, 2023 Nov. 03, 2024 ISN T5 Schwarzbeck NTFM 8158 101136 Nov. 04, 2023 Nov. 03, 2024 843 Cable 1# ChengYu CE Cable 001 Nov. 04, 2023 Nov. 03, 2024 843 Cable 1# ChengYu CE Cable 002 Nov. 04, 2023 Nov. 03, 2024 For Radiated Emission Test (966 chamber) Other Equipment Manufacturer Model Serial Last Cal. Next Cal. 966 chamber YIHENG 966 Room 966 Nov. 05, 2023 Nov. 04, 2026 Spectrum Analyzer Agilent E4408B MY50140780 Nov. 04, 2023 Nov. 03, 2024 EMI Receiver R&S ESRP7 101393 Nov. 04, 2023 Nov. 03, 2024 Amplifier Schwarzbeck …

Text truncated - open the document above for the full version.

specification 1.Ceramicparameters technicalrequirementqualification FrequencyRange(Frequencyrange) 1575.42±2MHz Bandwidthof Bandwidth10M Gain(Gain)3.5dBi StandingBobby(VSWR) ≤ 1.5 ： 1 Impedance(Impendance) 50 Polarizationmoderight-handedcircular polarization HorizontalcoverageAngle 360° Antennaaxis ratio ≤5db . 2 Impedancediagram 3. Environmentalcharacteristics Wuhan Innovation Technology Development Co., LTD 4.Antennastructurediagram Operatingtemperature (OperationalTemperature) -45°C～+75°C Storagetemperature(Storage Temperature) -40°C～+85°C Humidity(Humidity)40%～95% Useenvironment(Application Condition) Insidethemachine 25±0.1mm 25±0.1mm 2 5 ± 0 . 1 m m 2 5 ± 1 m m 2 5 ± 0 . 1 m m 2 ± 0.1mm

Shenzhen DL Testing Technology Co., Ltd. EUT TEST PHOTO Radiated Measurement Photos ※※※※※ END OF REPORT ※※※※※