2BHX2BH020124RADAR

User Manual Overview 1. XDT Radar 2. XDT Radar Footplate 3. MAIN LED-Lights 4. KPH Indication light 5. MPH Indication light 6. Power/Switch Buon 7. Status LED 8. Charging Port (USB-C) 1 2 6 7 3 5 8 4 Package Content Assembly Instruction Using the hex key, aach the radar footplate with the remaining screws provided. 1 x Radar 1 x Radar footplate 4 x screws 1 x hex key 1 x USB-C charging cable 1 x Quick-start guide & user manual Quick start guide Charging Step 1 Press and hold the buon to power on. e radar LED will turn on shortly to indicate standalone mode. Step 2 (optional) Change between kilometers per hour (KMH) and miles per hour (MPH) by pressing the power buon 2 times shortly. Step 3 Place the radar 0,5 meters centrally behind the goal, or 0,5 meters right/le of the goal post Step 4 Start shooting! e radar will show the registered speed for 5 seconds. To charge XDT Radar, connect a USB adapter (not included) to the charging port using the power cable. e baery is fully charged when the baery indicator turns o. Safety considerations • e product is not recommended for use by children under 8 years of age. • Read instructions thoroughly and keep for future reference. • is device contains electrical equipment that could cause injury if not handled properly. • is toy contains a baery that is non-replaceable. Do not aempt to replace the baery or open the enclosure or disassemble the device. Doing so can result in a safety hazard and will void the warranty. • Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • Do not use the device if it is damaged. Substances in the device and its baery may harm the environment or cause injury if handled or disposed improperly. • Do not dispose the device in a re. e baery could explode. • Do not expose the device to extremely high or low temperatures or heavy rain. • e device is water splash-proof only (IPX4). Do not immerse in water. • Store the product in a dry and moisture free environment. • Keep a safe distance to other people and objects. Collision hazard. Use of 1 or more devices by several people within the same playing area can cause serious injuries. • Usage of the device while under the inuence of alcohol or drugs is prohibited. • Do not charge the device while it is wet. • Do not use the device while charging it. Caution • Disposal of a baery into re or a hot oven, mechanically crushing or cuing , can result in an explosion. • Leaving a baery in an extremely high temperature environment can result in explosion, leakage of ammable liquid or gas. • A baery subjected to extremely low air pressure may result in explosion, leakage of ammable liquid or gas. • Regularly check for damage to the power cable, charging port, device sealing condition, and in the event of damage, it shall not be used until the damage is repaired. Maintenance Clean the product with a so, moist cloth aer each use, and regularly check for visible damage or changes. Do not use solvents, detergent, soap powder or hot water under any circumstances. Disposal and recycling information e symbol on the device and its packaging signies that this device must be disposed separately from the ordinary household wastes at its end of life because it contains a baery and is electronic equipment. For information about where to recycle contact your local waste disposal authority or the retailer where you bought the device. Regulatory Information Federal Communications Commission (FCC) Statement is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. ese limits are designed to provide reasonable protection against harmful interference in a residential installation. is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the - receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2BHX2BH020124 is equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. is transmier must not be co-located or operating in conjunction with any other antenna or transmier. CE Statement Beer Hockey is authorized to apply the CE mark on its product, thereby declaring conformity to the essential requirements and other relevant provisions of Directive 2014/53/EU and other applicable Directives. Frequency bands: 2402-2480MHZ Maximum output power: 2.70dBm Frequency bands: 10.525GHz Maximum output power: 15.96dBm Warranty Smart Hockey Radar is subject to a warranty period of 2 years. To make a warranty claim, please contact our dealer network or customer service by e-mail: [email protected] e warranty does not include damage caused by: •Accidents or unforeseeable events (e.g. lightning , ooding , re, etc.) •Improper use, transport or storage •Ignoring safety and maintenance rules •Any other improper handling or alterations •Normal wear and tear Manufacturer Bethoc AB Kemistvägen 2A 183 79…

Text truncated - open the document above for the full version.

(800) 663-9080 N/A

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 Appendix External Photos for SZCR2406002445AT FCC ID: 2BHX2BH020124 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 5 Appendix Internal Photos for SZCR2406002445AT FCC ID: 2BHX2BH020124 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 5 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244503 Page: 1 of 10 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2406002445AT (SGS SZ NO.: T52410300107EM) Applicant: Bethoc AB Address of Applicant: kemistvagen 2a, taby 18379, Sweden Equipment Under Test (EUT): EUT Name: RADAR Item No.: R.01 Country of Destination: SWEDEN Requested Age Grading: 8+ FCC ID: 2BHX2BH020124 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2024-06-25 Date of Test: 2024-06-29 to 2024-07-02 Date of Issue: 2024-08-05 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244503 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2024-08-05 Original Authorized for issue by: Martin Tang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244503 Page: 3 of 10 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 General Description of E.U.T. ....................................................................................................... 4 3.3 Separation Distance ..................................................................................................................... 4 3.4 Test Location ............................................................................................................................... 5 3.5 Test Facility .................................................................................................................................. 5 3.6 Deviation from Standards ............................................................................................................. 5 3.7 Abnormalities from Standard Conditions ....................................................................................... 5 4 FCC Radiofrequency radiation exposure limits ................................................................................ 6 4.1 Blanket 1 mW Blanket Exemption ................................................................................................. 6 4.2 MPE-based Exemption ................................................................................................................. 6 4.3 SAR-based Exemption ................................................................................................................. 7 5 Measurement and Calculation ..........................................................................................................10 5.1 Maximum transmit power ............................................................................................................10 5.2 RF Exposure Calculation .............................................................................................................10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244503 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 General Description of E.U.T. Power supply: Rechargeable battery DC3.7V,mAh, Wh, Charged by DC 5V Cable(s): Type-C cable:about 30cm unshielded Bluetooth Version: V5.0 LE Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: 2.55dBi Remark : The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244503 Page: 5 of 10 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1336 SGS-CSTC Sta…

Text truncated - open the document above for the full version.

Inverted F PCB antenna specification 1: Dimension L x W ：14.5mm*5.4mm 2: Working Frequency ：2400MHZ-2500MHZ 3：Central Frequency：2450MHZ 4：Bandwidth ：100MHZ (Min) 5: Return Loss ：-10dB (Max) 6：Impedance ：50Ω 7：Peak Gain：2.55 dBi 8：Operating Temperature ：-40～+85 °C 9：Polarization ：Linear 10：Azimuth Beamwidth ：Omni-directional 11：Model Type： CSIG F-2 Antenna 12：Manufacturer：CSIG Network Technology Co.ltd 13: Manufacturer Addr：Room 1701, Building 4#, No 4567 GaoQing Road, Pudong, Shanghai, China Gain&Efficiency&PhaseCenter Gain&Efficiency&PhaseCenter 增益、效率和相位中心 frequency 频率(MHz) gain 增益(dBi) gain 增益对应角度 (°) CO Gain 主极化最 大增益 (dBi) CP Gain 交叉极化 最大增益 (dBi) efficiency 效率(dB) efficiency 效率(%) 2400 2.55 ψ=89,θ=128 0 0 -2.05 62.33 2410 1.84 ψ=89,θ=129 0 0 -2.5 56.17 2420 2.37 ψ=89,θ=130 0 0 -2.3 58.87 2430 2.23 ψ=89,θ=130 0 0 -2.55 55.62 2440 1.46 ψ=90,θ=131 0 0 -2.8 52.52 2450 1.74 ψ=90,θ=132 0 0 -2.83 52.06 2460 1.57 ψ=91,θ=132 0 0 -3.1 48.96 2470 1.17 ψ=91,θ=133 0 0 -3.17 48.23 2480 1.48 ψ=92,θ=133 0 0 -3.12 48.8 2490 0.73 ψ=92,θ=133 0 0 -3.77 41.97 2500 0.79 ψ=126,θ=42 0 0 -3.61 43.55 2510 1.05 ψ=93,θ=133 0 0 -3.66 43.04 2520 0.52 ψ=94,θ=133 0 0 -3.9 40.78 2530 0.69 ψ=95,θ=133 0 0 -3.85 41.18 2540 0.67 ψ=127,θ=43 0 0 -4.09 39.01 2550 0.18 ψ=127,θ=44 0 0 -4.31 37.08 2560 0.29 ψ=129,θ=44 0 0 -4.38 36.44 2570 0.17 ψ=131,θ=44 0 0 -4.65 34.28 2580 -0.71 ψ=134,θ=44 0 0 -5.24 29.93 2590 -0.36 ψ=150,θ=45 0 0 -5.18 30.31 2600 -0.79 ψ=154,θ=46 0 0 -5.64 27.27 PolarGraphs 2400 MHz 2410 MHz 2420 MHz 2420 M 2430 MHz 2440 MHz 3D_Graphs 2450 MHz 2470 MHz 2460 MHz 2480 MHz 2490 MHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244502 Page: 1 of 59 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2406002445AT (SGS SZ NO.: T52410300107EM) Applicant: Bethoc AB Address of Applicant: kemistvagen 2a, taby 18379, Sweden Equipment Under Test (EUT): EUT Name: RADAR Item No.: R.01 Country of Destination: SWEDEN Requested Age Grading: 8+ FCC ID: 2BHX2BH020124 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2024-06-25 Date of Test: 2024-06-29 to 2024-07-02 Date of Issue: 2024-08-05 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244502 Page: 2 of 59 Revision Record Version Chapter Date Modifier Remark 01 2024-08-05 Original Authorized for issue by: Martin Tang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244502 Page: 3 of 59 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600244502 Page: 4 of 59 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 6 4.4 Test Location ............................................................................................................................... 7 4.5 Test Facility .................................................................................................................................. 7 4.6 Deviation from Standards ............................................................................................................. 7 4.7 Abnormalities from Standard Conditions ....................................................................................... 7 5 Equipment List ................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ..........................................................................................10 6.1 Antenna Requirement .................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 Radio Spectrum Matter Test Results ................................................................................................11 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ..........................................................11 7.1.1 E.U.T. Operation .....................................................................................................................11 7.1.2 Test Mode Description ............................................................................................................11 7.1.3 Test Setup Diagram ................................................................................................................12 7.1.4 Measurement Procedure and Data .........................................................................................12 7.2 Conducted Peak Output Power ...................................................................................................15 7.2.1 E.U.T. Operation .....................................................................................................................15 7.2.2 Test Mode Description ................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Appendix Test Setup Photos for SZCR2406002445AT FCC ID: 2BHX2BH020124 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Spurious Emissions Below 1GHz Radiated Spurious Emissions Above 1GHz - End of the Appendix -