2BHXI-XH-X6Multi-function wireless charger

FAQ Certification standard 4 in 1 wireless charger XH-X6 User manual Suitable for iPhone 8 and above whole series Suitable for mobile phones compatible with Qi wireless charging standard Suitable for Airpods Pro/3/2 (wireless version only) Suitable for TWS bluetooth earpods compatible with Qi wireless charging standard Suitable for Apple iWatch whole series Night lamp Thank you for purchasing our products! This product is a 4 in 1 wirelesss charger supports power charging of Qi compatible mobile phones/ iWatch/ TWS Bluetooth earphones. One wireless charger can charge up to 3 devices at the same time. It can also work as a night lamp. It brings you an easy charging experience without the hassle of entangling wires. Product introduction Product appearance Mobile phone charging area Earphone charging area iWatch charging area ↑ Input jack iWatch charging part installation Lift up the upper for charging mobile phone Notice: The removable watch charging part cannot work alone, it can only work with this specific product. If plug it into other products, it will be damaged. Wireless charger*1Product name: 4 in 1 wireless charger Input: 9V 3A1M Type C Cable*1 User manual*1 Mobile phone output: 5W/7.5W/10W/15W Earphone output: 3W (max) iWatch output: 2.5W (max) Night lamp output: 1W (max) Product parametersAccessory list Operating steps Indicator status 1. Power on the device with the fast charger and Type-C charging cable we provide firstly. 2. After connected to the power supply, the night lamp will flash for 3 seconds and then turn off; then it will stay off when the wireless charger is in standby mode; it also stays off during charging. Night lamp in white light will flash when metal objects are detected or charging status is abnormal. 3. When charging, if the device is a Qi-enabled mobile phone, iWatch or TWS Bluetooth earphone, just put the device on the corresponding charging area and it will start charging in 1 second. When the device is fully charged or you want to terminate the charging, just remove it from the charging area. Power connected Standby Phone charging/Earphone charging/iWatch chargingOff White light flashing Indicator status Night lamp Off White/warm light light up 3 seconds, then off Metal objects or abnormal charging are detected ↑ ↑ OK NG iWatch charging part collection Night lamp touch switch Night lamp 1：One time press, white light 2：Press twice, warm light 3：Three time press, turn off the light 1. Please put the phone/airPods/Watch at the center of charging area. 2. To achieve the fast charging, Please use a charger above QC18W or PD20W to supply power to the wireless charger. 3. The charging distance is 0-2mm, please don't wear protective case which is thicker than 2mm. (Magnetic and metal attachments or credit cards will influence the charging stability, please remove them before charging). 4. The watch has temperature control feature, when the temperature reaches 45°C, device will stop charging automatically. If the temperature become normal, it will continue to charge. 5. The lower temperature is, the faster charging speed is. The charging speed is faster in winter than in summer. 6. Please don't charge in high temperature and humid environments to avoid damage of circuit. 7. Put it at the place that children can't reach to avoid unnecessary accidents. 8. Please place the charger away from flammable and explosive liquids or gases. 9. If you have any problems on this wireless charger, please feel free to contact the seller service, we will offer you a best solution within 24 hours. Your safety and experience is our top priority, we got it all covered. National Quality Assurance standard-Executive standard: GB/T1095-2003 FCC Executive standard: FCC47 CFR Part 15c CE Executive standard: EN55032, EN55035, EN61000-3-2, EN 61000 ROHS Executive standard: ROHS2.0 UL Executive standard: UL62368 FCC ID Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. FCC ID：2BHXI-XH-X6

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:4358SBANNOCKSTENGLEWOOD,CO80110UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenXinhuiWirelessIntelligenceCo.,Ltd. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenXinhuiWirelessIntelligenceCo.,Ltd. ProductDescription:4in1wirelesscharger FRN:0035737956 GranteeCode:2BHXI FCCID:2BHXI-XH-X6 ContactName:Huangyuanxin Address:B311,ZhongshunyiquanInd.Park,#436FuqianRd.,FuchengSt.,Longhua,Shenzhen TelephoneNo:+8613411130022 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2024/08/06 Applicant’sName:HuangyuanxinUSAgentforServiceofProcess’sName: Title:manageTitle:Manager SignatureSignature

Shenzhen Xinhui Wireless Intelligence Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-08-03 FCC ID: 2BHXI-XH-X6 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen Xinhui Wireless Intelligence Co., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen Xinhui Wireless Intelligence Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Shenzhen Xinhui Wireless Intelligence Co., Ltd. Address: B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen Tel.: 13411130022 Email: [email protected] Sincerely, Signature:

Dongguan CityXinwang Coil Technology Co., Ltd Add: Room 601, Building 2, No. 92, Xinxing Road, Hengtang Industrial Zone, Tangxia Town, Dongguan City （ Tel ） : 13662722286 （ Fax ） : SPECIFICATON APPROVAL CUSTOMER Shenzhen Hancai Electronics Co., LTD Product Name ofCustomer Transmitting coil module Product Mame ofOurs(Matenial) Transmitting coil module APPROVED ： APPROVED DRAWN Wang Xingwang DATE 2024-6-27 1 of 4 Specification CISTOMEP/N: Transmitting coil module PARTNUMBER： 1.DIMENSIONS：mm A 5.3±0.5 B 14±1 C 38±1 D 40±1 E 60±2 F 2-5 G 2.8MAX H 0.8±0.1 I J k L M N O R Q P APPROVED BY CHECKED BY PREPARED BY DATE PACE Wang Xingwang 2024-6-27 2 of 4 Specifcation CUSTOMERP/N: Transmitting coil module PARTNUMBER： 5.WINDING DETAILS： Wdy.NO. Start Finish Turns Wire Dia Wdg.TyepeSprad/lose Wdg.Directio n Turns/Layer S F 12S 0.08*105P close winding anticloc kwise 1/12S 6.ELECTRICAL CHARACTERISTICS： PARAMETERS UNIN LIMTI Inductance ls@100KHz/1v uh 6.3H±10％ Q @100KHz/1v 70MIN DCR @100KHz/1v Ω 70MAX APPROVED BY CHECKED BY PREPARED BY DATE PAGE Wang Xingwang 2024-6-27 3 of 4 MATERIAL LIST 材 料 清 单 CUSTOMER P/N: 客 户 品 名 Transmitting coil module PARTNUMBER： 制造商料号 NO. Material name Description Manufacturer Material 1 silk-covered wire 0.08*105P 99.95% red copper 2 Lead-free tin strip high temperature 3 high-temperature adhesive Goldfinger 4 glue resin adhesive 5 magnetic sheet 43.5*0.8*5.3MM Ferrite. Manganese zinc PC40 6 double faced adhesive tape Hand tear bit back glue 7 EPE foam 270*380*55 8 carton 280*390*190 9 10 APPROVED BY CHECKED BY PREPARED BY DATE PAGE Wang Xingwang 2024-6-27 4 of 4

Letter of acceptance Hanzi YZ-G25-2.5-7.6UH-3200GS-7MM July 31, 2023 Dongguan Jireisi technology Co., LTD drawauditapprover Lu Lin Deng Xianggui Lu Rusheng Dongguan Jierith Technology Co., LTD Tel: Fax: 86+13632701380 add：No. 152, Guan Chang Road, Taigongling Village, Dalingshan Town, Dongguan City customer name Our modelversion date Hanzi YZ-G25-2.5-7.6UH-3200GS-7MMA02023.7.31 customer: P/N: MODE: date: supplier: 一、Plane structure: Unit :MM 二、Product Parameter： placewire diameter Number of turns descr 1 -- 20.08*2413 Hot air stranding wire 三、Thermal technical requirements: (Magnetic force of the magnet is 3200 Gauss) 1. Fix the end of the wire to prevent loose and broken wires 2．According to customer requirements, the long thread is cut and tinned, and the tinning depth is 2±1MM 3．Point the appropriate white glue on the soft magnetic sheet, paste the coil, and ensure that the product surface is clean and tidy in the process 4.The soft magnetic sheet used is with round holes, without damage 5.Additional process (according to customer requirements) : Install 7.65x2.0mm magnet in the middle of the finished product round hole and in the finished product Double sided adhesive with a diameter of 16mm on the back, after packaging 四、electrical parameter： 1.Inductance value, Q value： PIN1 — 2 = 7.6 uH±0.2UH Q ≥25 The above inductance values are based on Quanhua 1062A instrument,10KHZ/0.3Vrms as standard or equivalent instrument. Q value is based on Quanhua 1062A instrument, 100KHZ/0.3Vrms as standard or equivalent instrument

Dongguan CityXinwang Coil Technology Co., Ltd Add: Room 601, Building 2, No. 92, Xinxing Road, Hengtang Industrial Zone, Tangxia Town, Dongguan City （ Tel ） : 13662722286 （ Fax ） : SPECIFICATON APPROVAL CUSTOMER: Shenzhen Hancai Electronics Co., LTD Product Name ofCustomer Transmitting coil module Product Mame ofOurs(Matenial) Transmitting coil module APPROVED APPROVED DRAWN Wang Xingwang DATE 2024-6-27 1 of 4 Specification CISTOMEP/N: Transmitting coil module PARTNUMBER： 1.DIMENSIONS：mm A 5.3±0.5 B 18±1 C 41±1 D 43.5±0.5 E 60±2 F 2-5 G 2.8MAX H 0.8±0.1 I J k L M N O R Q P APPROVED BY CHECKED BY PREPARED BY DATE PACE Wang Xingwang 2024-6-27 2 of 4 Specifcation CUSTOMERP/N: Transmitting coil module PARTNUMBER： 5.WINDING DETAILS： Wdy.NO. Start Finish Turns Wire Dia Wdg.TyepeSprad/lose Wdg.Directio n Turns/Layer S F 11S 0.08*105P close winding anticloc kwise 1/11S 6.ELECTRICAL CHARACTERISTICS： PARAMETERS UNIN LIMTI Inductance ls@100KHz/1v uh 6.8H±10％ Q @100KHz/1v 70MIN DCR @100KHz/1v Ω 70MAX APPROVED BY CHECKED BY PREPARED BY DATE PAGE Wang Xingwang 2024-6-27 3 of 4 MATERIAL LIST CUSTOMER P/N: Transmitting coil module PARTNUMBER： NO. Material name Description Manufacturer Material 1 silk-covered wire 0.08*105P 99.95% red copper 2 Lead-free tin strip high temperature 3 high-temperature adhesive Goldfinger 4 glue resin adhesive 5 magnetic sheet 43.5*0.8*5.3MM Ferrite. Manganese zinc PC40 6 double faced adhesive tape Hand tear bit back glue 7 EPE foam 270*380*55 8 carton 280*390*190 9 10 APPROVED BY CHECKED BY PREPARED BY DATE PAGE Wang Xingwang 2024-6-27 4 of 4

Shenzhen Xinhui Wireless Intelligence Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 3, 2024 Subject; Request for Confidentiality FCC ID: 2BHXI-XH-X6 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Huang yuanxin Title: Manager

Model difference statement Aug. 08, 2024 We Shenzhen Xinhui Wireless Intelligence Co., Ltd. Of B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen Declare under our sole responsibility that the product Product: 4 in 1 wireless charger Model Number: XH-X6, XH-X10, XH-X11, XH-X12, XH-X13, XH-X14, XH-X15, XH-X16, XH-X17, XH-X18, XH-X19, XH-X20, XH-X21, XH-X22, XH-X23, XH-X24, XH-X25, VEA01 All the models are the same circuit and module, except the model No. Sincerely, Huangyuanxin /Manager E-mail: : [email protected] Phone: +86 13411130022 Fax: +86 13411130022 Address : B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Xinhui Wireless Intelligence Co., Ltd. Date：Aug. 03, 2024 Product Model Number: XH-X6 FCC ID：2BHXI-XH-X6 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 13411130022 On behalf of: Shenzhen Xinhui Wireless Intelligence Co., Ltd.

Ext Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Int Photo Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Earphon e: ANT Photo 9 Photo 10 Phone : ANT iWatch: ANT Photo 11 Photo 12

- Page 1 of 12 - Report No.: HB20240726008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: 4 in 1 wireless charger Trade Mark: Model Number: XH-X6 FCC ID: 2BHXI-XH-X6 Prepared for Shenzhen Xinhui Wireless Intelligence Co., Ltd. B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20240726008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 4 RF EXPOSURE .................................................................................................................................................... 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................. 10 4.1.4. Test Result ................................................................................................................................................. 11 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................12 - Page 3 of 12 - Report No.: HB20240726008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Xinhui Wireless Intelligence Co., Ltd. Address ................................. : B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen Manufacturer's Name .......... : Shenzhen Xinhui Wireless Intelligence Co., Ltd. Address ................................. : B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen Product description Product name ........................ : 4 in 1 wireless charger Model Number ....................... : XH-X6 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : July 29, 2024~Aug. 03, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20240726008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Aug. 03, 2024 Original - Page 5 of …

Text truncated - open the document above for the full version.

-Page 1 of 33 - Report No.: HB20240726008E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: 4 in 1 wireless charger Trade Mark: Model Number: XH-X6 FCC ID: 2BHXI-XH-X6 Prepared for Shenzhen Xinhui Wireless Intelligence Co., Ltd. B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 33 - Report No.: HB20240726008E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .................................................................................................................................. 9 5 TEST ITEM AND RESULTS ...................................................................................................................................11 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 11 5.2 CONDUCTED EMISSION ............................................................................................................................................. 12 5.3 RADIATED EMISSION ................................................................................................................................................ 16 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 21 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................23 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................25 - Page 3 of 33 - Report No.: HB20240726008E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Xinhui Wireless Intelligence Co., Ltd. Address ................................. : B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen Manufacturer's Name .......... : Shenzhen Xinhui Wireless Intelligence Co., Ltd. Address ................................. : B311, Zhongshunyiquan Ind. Park, #436 Fuqian Rd., Fucheng St., Longhua, Shenzhen Product description Product name ........................ : 4 in 1 wireless charger Model Number ....................... : XH-X6 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : July 29, 2024~Aug. 03, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 33 - Report No.: HB20240726008E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revi…

Text truncated - open the document above for the full version.

- Page 1 of 2 - Test Setup Photos Radiated Emission Below 30MHz Radiated Emission Above 30MHz - Page 2 of 2 - Conducted emission MPE