Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
FCC ID LABEL: Ca. 50mm x 50mm Label Location FCC ID:2BHXM-T19
MPE ESTIMATION FCC ID: 2BHXM-T19 1, Limit for General Population/ Uncontrolled Exposures Frequency Power density (mW/ cm 2 ) Averaging time(minutes) 300MHz----1.5GHz F/1500 30 1.5GHz---100GHz 1.0 30 Note: F= Frequency in MHz 2, Estimation Result Frequency (MHz) Max PK Output power(dBm) Tune Up Power(dBm) Max Tune Up power(mW) Antenna Gain(dBi) Antenna Gain (numerical) MPE (mW/cm²) 2.4G WiFi 2422 13.90 13±1(14) 25.119 2.44 1.75 0.00877 Note: Note: The estimation distance is 20cm Note: PK Output power= conducted power. Conducted power see the test report HK2404151798-E, antenna gain= 2.44dBi When the minimum test separation distance is >20 cm, a distance of 20 cm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.00877mW/cm² which is< 1.0mW/cm², RF Exposure testing is not required. -------The End-------
Ante 供应商 Vendo 客户 Custom 样品 Sampl 产品 Part 样品 Specif 检验 Inspect 备 Rem 品质 QA A 客户 Cust Evalu 客户签 Signa Cha by Cu nna Sample C 地址： 深 Ante 商名称 or Name 户名称 mer Name 品名称 e Name 品型号 Number 品规格 fication 验项目 tion Item 备注 mark 质审核 Audit 户意见 tomer uation 签字/盖章 ation/ apter ustomer Confirmation Fr 深圳市宝安 TEL：0 深圳健 enna S 性能测试 Performanc The rom 安区航城街 0755‐85274 健海通天 天线 Samp Shenzhen 37.8*1 试 ce 外 Total 工 Engi 以下 e following 街道鹤洲中科 4764 FAX 天线技 线规格 le Con 深圳健海通天 n kenhaitong 深圳市立晶智 WI KIT-YP-C 12.6FPC、IP 外观检查 Appearanc e 工程审核 neer Audit 下由客户填写 are filled 科诺工业园 X：0755‐85 技术有 格书 nfirma 天线技术有限 antenna tech 智能科技有限 IFI天线 C800-1-WF-V0 EX1代端子线 e 结构 structu 写 by Custom e 日期 园一号楼西 274764 限公司 ation F 限公司 hnology co,lt 限公司 02 线、线长82mm re 其 它 Other 业务确 Sale Confi er 期/date: 面3楼 司 第 1 页 From td 它 rs 检验 Inspe Res 确认 es rm 广东健博 证劵代码：83 页 共 9 页 结果 ction ult 博通 31958 Ante 测 试 Test 材料 Mat 天线 Ante 应用 App 工作 Ban 功率 Pow 增益 dBi 测试 Tes nna Sample C 地址： 深 试单位: 深圳健 t by：Shenzhe 料 erial 线类型 enna Type 用场景 plication 作频段 nd 率 wer 益 试设备 t Equipmen t Confirmation Fr 深圳市宝安 TEL：0 深圳健 Ante 健海通天线技 en kenhaitong FPC Mon visu 2.4G Max 2.44 t HP E rom 安区航城街 0755‐85274 健海通天 enna 技术有限公司 g antenna tec C+同轴线 nopoleType ual doorbell G WIFI x：2W 4dBi E5071C、Sh 街道鹤洲中科 4764 FAX 天线技 Test chnology co, 极化 Pola VSW 阻抗 Imp hielding Roo 科诺工业园 X：0755‐85 技术有 Repo ltd 化方式 arization mo WR 抗 pedance om、3D aut 园一号楼西 274764 限公司 ort ode Mo n ≤1.7 50Ω tomatic turnt 面3楼 司 第 2 页 nopole 7 Ω table 广东健博 证劵代码：83 页 共 9 页 博通 31958 Ante Ante 1. G 2. N Spe spec nna Sample C 地址： 深 enna Descri Grounding pr Need to chan Test vo The RF curled. ecification: te cifications. Confirmation Fr 深圳市宝安 TEL：0 深圳健 ption:： rocessing an nge the moth oltage: 3.6V, F cable of th est the spec rom 安区航城街 0755‐85274 健海通天 nd picture de herboard to , check the a e integrated ified power 街道鹤洲中科 4764 FAX 天线技 escription: n match: no antenna con d tester is ke level, all ind 科诺工业园 X：0755‐85 技术有 no ntact is good ept in a natu dicators mus 园一号楼西 274764 限公司 d before test ral state and st conform to 面3楼 司 第 3 页 ting. d can not be o the 广东健博 证劵代码：83 页 共 9 页 e 博通 31958 Ante 1、 匹 配 备注 No 2、 m e nna Sample C 地址： 深 天线匹 配电路图 E01 No 注：匹配 ote: Matc 暗室测 ethod Confirmation Fr 深圳市宝安 TEL：0 深圳健 配电路/ 图（没修改 配无修改 ching cir 测试设备和 rom 安区航城街 0755‐85274 健海通天 /Antenna 改）/ Mat 改。 rcuit dia 和方法/ 街道鹤洲中科 4764 FAX 天线技 a Matchin 项目 tching ci E02 No agram no Darkroo 科诺工业园 X：0755‐85 技术有 ng Ciruit rcuit dia g ot modif om test e 园一号楼西 274764 限公司 gram (no E0 N fied equipmen 面3楼 司 第 4 页 ot modifi 03 o nt and 广东健博 证劵代码：83 页 共 9 页 ed) 博通 31958 Ante 3、 频 （M 驻 nna Sample C 地址： 深 天线无 频率 MHz） 驻波比 Confirmation Fr 深圳市宝安 TEL：0 深圳健 无源测试数 2400 1.76 rom 安区航城街 0755‐85274 健海通天 数据/ An 街道鹤洲中科 4764 FAX 天线技 ntenna p 2500 1.52 科诺工业园 X：0755‐85 技术有 assive te 园一号楼西 274764 限公司 est data 面3楼 司 第 5 页 广东健博 证劵代码：83 页 共 9 页 博通 31958 Ante nna Sample C 地址： 深 Frequenc 240 241 242 243 244 245 246 247 248 249 250 Confirmation Fr 深圳市宝安 TEL：0 深圳健 cy / MHz 0 0 0 0 0 0 0 0 0 0 0 rom 安区航城街 0755‐85274 健海通天 Ef 街道鹤洲中科 4764 FAX 天线技 fficiency / 50.82 50.7 52.72 52.24 57.54 59.29 59.43 57.81 59.57 59.29 58.61 科诺工业园 X：0755‐85 技术有 % 园一号楼西 274764 限公司 Ga 面3楼 司 第 6 页 ain/ dB 1.98 1.99 2.02 1.99 2.4 2.44 2.43 2.25 2.4 2.33 2.41 广东健博 证劵代码：83 页 共 9 页 博通 31958 Ante （M nna Sample C 地址： 深 Band 802.1 （11Mb p 802.1 （54Mb p 802.1 MCS7-65 Confirmation Fr 深圳市宝安 TEL：0 深圳健 d 1b ps） 1g ps） 1n Mbps） rom 安区航城街 0755‐85274 健海通天 Chan L M H L M H L M H 街道鹤洲中科 4764 FAX 天线技 nnel L M H L M H L M H 科诺工业园 X：0755‐85 技术有 TRP 16.65 18.9 16.69 13.74 15.32 13.22 13.75 15.36 13.78 园一号楼西 274764 限公司 P 5 9 4 2 2 5 6 8 面3楼 司 第 7 页 TIS 84.4 88.15 88.58 72.84 75.01 74.82 70.99 71.51 71.53 广东健博 证劵代码：83 页 共 9 页 博通 31958 Ante 4、 wifi 2 nna Sample C 地址： 深 天线环 2.4G Confirmation Fr 深圳市宝安 TEL：0 深圳健 环境处理/ The rom 安区航城街 0755‐85274 健海通天 / Antenn mode of weld Align the a red line fro 街道鹤洲中科 4764 FAX 天线技 a enviro ding wire is a antenna to t om right to 科诺工业园 X：0755‐85 技术有 nmental as shown the left 园一号楼西 274764 限公司 l treatme Lin bo av an 面3楼 司 第 8 页 ent ne the micro ox position, t void the posit ntenna 广东健博 证劵代码：83 页 共 9 页 phone from t he other line tion away fro 博通 31958 the red to m the Ante 5、 nna Sample C 地址： 深 结构图纸 Confirmation Fr 深圳市宝安 TEL：0 深圳健 纸 / Stru rom 安区航城街 0755‐85274 健海通天 uctural dra 街道鹤洲中科 4764 FAX 天线技 awing 科诺工业园 X：0755‐85 技术有 园一号楼西 274764 限公司 面3楼 司 第 9 页 广东健博 证劵代码：83 页 共 9 页 博通 31958
Page 1 of 73 Report No.: HK2404151798-E FCC Test Report Test Report On Behalf of LCHED DEVELOPMENT (ShenZhen) CO., LIMITED For 5MP HDR Power Strip Smart Camera Model No.: T19 FCC ID: 2BHXM-T19 Prepared For: LCHED DEVELOPMENT (ShenZhen) CO., LIMITED Room 601, Building C, No. 10 Shunjing Road, Pingxi Community, Pingdi Street, Longgang District, Shenzhen, Guangdong, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Apr. 15, 2024 ~ May 08, 2024 Date of Report: May 08, 2024 Report Number: HK2404151798-E Page 2 of 73 Report No.: HK2404151798-E Test Result Certification Applicant’s Name ................. : LCHED DEVELOPMENT (ShenZhen) CO., LIMITED Address .................................. : Room 601, Building C, No. 10 Shunjing Road, Pingxi Community, Pingdi Street, Longgang District, Shenzhen, Guangdong, China Manufacturer's Name ........... : LCHED DEVELOPMENT (ShenZhen) CO., LIMITED Address .................................. : Room 601, Building C, No. 10 Shunjing Road, Pingxi Community, Pingdi Street, Longgang District, Shenzhen, Guangdong, China Product Description Trade Mark ............................. : TBCR Product Name ......................... : 5MP HDR Power Strip Smart Camera Model and/or Type Reference : T19 Standards ............................... : FCC Rules and Regulations Part 15 Subpart C Section 15.247 ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of Performance of Tests ............ : Apr. 15, 2024 ~ May 08, 2024 Date of Issue ........................................... : May 08, 2024 Test Result ............................................... : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 73 Report No.: HK2404151798-E Table of Contents 1. Test Result Summary ............................................................................... 5 1.1 Test Procedures and Results ........................................................................................................... 5 1.2 Information of the Test Laboratory ................................................................................................. 5 1.3 Measurement Uncertainty ................................................................................................................ 6 2. EUT Description ........................................................................................ 7 2.1 General Description of EUT ............................................................................................................. 7 2.2 Carrier Frequency of Channels ........................................................................................................ 8 2.3 Operation of EUT during Testing ..................................................................................................... 8 2.4 Description of Test Setup ................................................................................................................. 9 3. General Information ................................................................................ 10 3.1 Test Environment and Mode .......................................................................................................... 10 3.2 Description of Support Units ......................................................................................................... 13 4. Test Results and Measurement Data .................................................... 14 4.1 Conducted Emission ....................................................................................................................... 14 4.2 Test Result ....................................................................................................................................... 16 4.3 Maximum Conducted Output Power ............................................................................................. 18 4.4 Emission Bandwidth ....................................................................................................................... 21 4.5 Power Spectral Density .................................................................................................................. 27 4.6 Conducted Band Edge and Spurious Emission Measurement .................................................. 34 4.7 Radiated Spurious Emission Measurement ................................................................................. 44 4.8 Antenna Requirement ..................................................................................................................... 70 5. Photographs of Test ............................................................................... 71 6. Photos of the EUT ................................................................................... 73 Page 4 of 73 Report No.: HK2404151798-E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release May 08, 2024 Jason Zhou Page 5 of 73 Report No.: HK2404151798-E 1. Test Result Summary 1.1 Test Procedures and Results Requirement CFR 47 Section Result Antenna requirement §15.203/§15.247(b)(4) PASS AC Power Line Conducted Emission §15.207 PASS Conducted Peak Output Power §15.247(b)(3) PASS 6dB Emission Bandwidth §15.247(a)(2) PASS Power Spectral Density §15.247(e) PASS Band Edge §15.247(d) PASS Spurious Emission §15.205/§15.209 PASS Note: 1. PASS: Test item meets the requirement…
Text truncated - open the document above for the full version.
Page 38 of 73 Report No.: HK2404151798-E 802.11g Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 39 of 73 Report No.: HK2404151798-E Middle Channel Spurious Emission Page 40 of 73 Report No.: HK2404151798-E 802.11n (HT20) Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 41 of 73 Report No.: HK2404151798-E Middle Channel Spurious Emission Page 42 of 73 Report No.: HK2404151798-E 802.11n (HT40) Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 43 of 73 Report No.: HK2404151798-E Middle Channel Spurious Emission Page 44 of 73 Report No.: HK2404151798-E 4.7 Radiated Spurious Emission Measurement Test Specification Test Requirement: FCC Part15 C Section 15.209 Test Method: ANSI C63.10: 2013 Frequency Range: 9 kHz to 25 GHz Measurement Distance: 3 m Antenna Polarization: Horizontal & Vertical Operation Mode: Transmitting mode with modulation Receiver Setup: Frequency Detector RBW VBW Remark 9kHz- 150kHzQuasi-peak200Hz 1kHz Quasi-peak Value 150kHz- 30MHz Quasi-peak9kHz 30kHz Quasi-peak Value 30MHz-1GHzQuasi-peak120KHz300KHz Quasi-peak Value Above 1GHz Peak 1MHz 3MHz Peak Value Peak 1MHz 10Hz Average Value Limit: Frequency Field Strength (microvolts/meter) Measurement Distance (meters) 0.009-0.490 2400/F(KHz) 300 0.490-1.705 24000/F(KHz) 30 1.705-30 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Frequency Field Strength (microvolts/meter) Measurement Distance (meters) Detector Above 1GHz 500 3 Average 5000 3 Peak Test Setup: For radiated emissions below 30MHz 30MHz to 1GHz Page 45 of 73 Report No.: HK2404151798-E Above 1GHz Test Procedure: 1. For the radiated emission test below 1GHz: The EUT was placed on a turntable with 0.8 meter above ground. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high PASS filter are used for the test in order to get better signal level. 2. For the radiated emission test above 1GHz: Place the measurement antenna on a turntable with 1.5 meter above ground, which is away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. Page 46 of 73 Report No.: HK2404151798-E The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level 4. For measurement below 1GHz, If the emission level of the EUT measured by the peak detector is 3 dB lower than the applicable limit, the peak emission level will be reported. Otherwise, the emission measurement will be repeated using the quasi-peak detector and reported. 5. Use the following spectrum analyzer settings: (1) Span shall wide enough to fully capture the emission being measured; (2) Set RBW=120 kHz for f < 1 GHz; VBW ≥RBW; Sweep = auto; Detector function = peak; Trace = max hold; (3) Set RBW = 1 MHz, VBW= 3MHz for f 1 GHz for peak measurement. 6.For average measurement: VBW = 10 Hz, when duty cycle is no less than 98 percent.VBW ≥ 1/T, when duty cycle is less than 98 percent where T is the minimum transmission duration over which the transmitter is on and is transmitting at its maximum power control level for the tested mode of operation. Test Results: PASS Page 47 of 73 Report No.: HK2404151798-E Test Instruments Radiated Emission Test Site (966) Name of Equipment Manufacturer Model Serial Number Calibration Date Calibration Due Spectrum analyzer Agilent N9020A HKE-025 Feb. 20, 2024 Feb. 19, 2025 Spectrum analyzer R&S FSV3044 HKE-126 Feb. 20, 2024 Feb. 19, 2025 Preamplifier EMCI EMC051845SHKE-006 Feb. 20, 2024 Feb. 19, 2025 Preamplifier Schwarzbeck BBV 9743 HKE-016 Feb. 20, 2024 Feb. 19, 2025 Preamplifier A.H. Systems SAS-574 HKE-182 Feb. 20, 2024 Feb. 19, 2025 6dB Attenuator Pasternack 6db HKE-184 Feb. 20, 2024 Feb. 19, 2025 EMI Test Receiver Rohde & Schwarz ESR-7 HKE-010 Feb. 20, 2024 Feb. 19, 2025 Broadband Antenna Schwarzbeck VULB9168 HKE-167 Feb. 21, 2024 Feb. 20, 2026 Loop Antenna COM-POWER AL-130R HKE-014 Feb. 21, 2024 Feb. 20, 2026 Horn Antenna Schewarzbeck 9120D HKE-013 Feb. 21, 2024 Feb. 20, 2026 EMI Test Software Tonscend JS32-RE 5.0.0HKE-082 / / RSE Test Software Tonscend JS36-RSE 5.0.0 HKE-184 / / Page 48 of 73 Report No.: HK2404151798-E Test Data All the test modes completed for test. Only the worst result was reported as below: Below 1GHz Horizontal: Remark: Factor = Cable loss + Antenna factor + Attenuator – Preamplifier; Level = Reading + Factor; Margin = Limit – Level; Page 49 of 73 Report No.: HK2404151798-E Vertical: Remark: Factor = Cable loss + Antenna factor + Attenuator – Preamplifier; Level = Reading + Factor; Margin = Limit – Level; Harmonics and Spurious Emissions Frequency Range (9kHz-30MHz) Frequency (MHz) Level@3m (dBμV/m) Limit@3m (dBμV/m) -- -- -- -- -- -- -- -- -- -- -- -- Note:1. Emission Level=Reading+ Cable loss-Antenna factor-Amp factor. 2. The emission levels are 20 dB below the limit value, which are not reported. It is deemed to comply with the requirement. Page 50 of 73 Report No.: HK2404151798-E Above 1GHz Radiated Emission Test LOW CH1 (802.11b Mode)/2412 Horizontal: FrequencyReading ResultFac…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.41 GHz - 2.46 GHz | 24.55 mW |