2BK2M-0260008Dometic Key Fob

Avis de conformité réglementaire Wireless Key Fob This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS-210 of Canada. Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage, et 2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Cet appareil est conforme à la norme RSS-210 du Canada. FCC ID: 2BK2M-026008 IC ID: 32536-0260008 Regulatory compliance notice ISED WARNING! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. AVERTISSEMENT ISDE! Toutes modifications non approuvées par l’organisation responsable de la conformité de l’équipement pourraient annuler le droit de l’utilisateur à l’utiliser. Canada This keyless system operates on a radio frequency subject to Federal Communications Commission (FCC) rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation of the device Regulatory compliance notice FCC WARNING! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. USA Copy Part# 604-0002, Rev. A-02 Page 1 of 1 D ate: 05/2026 SUPPLEMENT INSTRUCTIONS © 2026 Dometic, 3831 No. 6 Road, Richmond, B.C. Canada V6V 1P6 Fax: 604.270.7172 Web: www.dometic.com

Dometic Marine Phone. 604 270 6899 SeaStar 3831 No. 6 Road Fax. 604 270 7172 Richmond, BC V6V 1P6 dometic.com Attestation Statement -FCC Date: May 21, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Attestation regarding ‘covered’ equipment and the Covered List FCC ID: 2BK2M-0260008 To whom it may concern, Per 2.911(d)(5)(i), Dometic Marine Canada Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Per 2.911(d)(5)(ii), Dometic Marine Canada Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Junayed Nowshad Test Engineer

Dometic Marine Phone. 604 270 6899 SeaStar 3831 No. 6 Road Fax. 604 270 7172 Richmond, BC V6V 1P6 dometic.com 21 May 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Request for filing for FCC ID: 2BK2M-0260008 Applicant: Dometic Marine Canada Inc. 3831 No 6 Road, Richmond, BC V6V 1P6 Call Canada/USA (Toll Free): +1 605 270 6899 www.dometic.com Model Number: 026-0008 Product Name: Dometic Key fob FCC Identifier: 2BK2M-0260008 IC: 32536-0260008 To whom it may concern, Dometic Marine Canada Inc. would like to submit above stated product for FCC certification as an original certification. The device is a momentarily operated low-power radio key fob that complies with FCC 15.231 requirements. Please find in the following application all related documentation to support the filing for Dometic Key fob. Sincerely, Junayed Nowshad Test Engineer

Dometic Marine Phone. 604 270 6899 SeaStar 3831 No. 6 Road Fax. 604 270 7172 Richmond, BC V6V 1P6 dometic.com 21 May 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality request regarding application for certification of Dometic Key fob - FCC ID: 2BK2M-0260008 Model Number: 026-0008 Product Name: Dometic Key fob Type of Equipment: Momentarily operated low-power radio key fob FCC Identifier: 2BK2M-0260008 IC: 32536-0260008 Pursuant to sections 47 CFR 0.459 and 0.457(d) of the commission’s rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Bill of Materials BOM_Keyfob_9033352.xlsx Frequency Block Diagram of each Radio Block_diagram.pdf Schematics S474842_Schematics-Rev2.pdf Operating Description Operating Description.docx The above material contains trade secrets and proprietary information not customarily released to the public. Public disclosure of these materials may harm the applicant and provide unjustified benefits to its competitors. Sincerely, Junayed Nowshad Test Engineer

Label is compliant with UL969 to conform with labelling permanence requirements of 47 CFR 2.925 (i.e. labels must not peel off or fade over the lifetime of a device) Location of install on device simulated with a prototype label:

This report must not be used to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. This report is Blockchain Verified. To verify the report’s authenticity, please visit https://www.blockchain-verified.com/ or by clicking the logo to the right. Dometic Marine Canada Inc Dometic Key Fob FCC 1.1307:2026 FCC 2.1093:2026 Periodic Report: MRND0001.1 Rev. 01, Issue Date: July 6, 2026 Element Plano 1701 E. Plano Parkway #150 Plano, TX 75074 USA TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Evaluation .................................................................................. 3 Revision History .............................................................................................. 4 Facilities .......................................................................................................... 5 Product Description ......................................................................................... 6 Exposure Condition ......................................................................................... 7 Exemption From RF Exposure Evaluation ...................................................... 8 End of Report .................................................................................................. 12 Report No. MRND0001.1 Rev 012/12 CERTIFICATE OF EVALUATION 2018-09-14 EXRPT.2025.09.03.0 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: May 28, 2026 Dometic Marine Canada Inc EUT: Dometic Key Fob RF Exposure Evaluation Standards Specification Method FCC 1.1307:2026 FCC 2.1093:2026 FCC 1.1307:2026 Results Method Clause Description Applied Results Comments (b)(3)(i)(A) Exemption From RF Exposure Evaluation Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. MRND0001.1 Rev 013/12 REVISION HISTORY 2025.07.22 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Added duty cycle justification to product description page. 2026-06-10 6 Update the test report reference to MRND0001.0 Rev. 01. 2026-06-10 11 Recalculated the conducted power using a 9 dBm rated power. 2026-06-10 10 Report No. MRND0001.1 Rev 014/12 FACILITIES 2025.07.17 Testing was performed at the following location(s) Location Labs (1) Address A2LA (2) ISED (3) BSMI (4) VCCI (5) CAB FDA (6) ☒ Plano Texas PT01-15 1701 E Plano Pkwy, Ste 150 Plano, TX 75074 (972) 509-2566 214.19 32637 SL2-IN-E-057R A-0426 US0054 TL-137 ☐ Offsite N/A See Product Description N/A N/A N/A N/A N/A N/A See data sheets for specific labs (1) The lab designations denote individual rooms within each location. (OC01, OC02, OC03, etc.) (2) A2LA Certificate No. (3) ISED Company No. (4) BSMI No. (5) VCCI Site Filing No. (6) FDA ASCA No. Report No. MRND0001.1 Rev 015/12 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: Dometic Marine Canada Inc Address: 3831 No. 6 Road City, State, Zip: Richmond, BC V6V 1P6 Canada Evaluation Requested By: Jason Curtis EUT: Dometic Key Fob Date of Evaluation: 5/28/2026 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: Wireless Key Fob for local control of a digital device on the 418MHz spectrum Objective: To demonstrate compliance with FCC Requirements for RF exposure for 1.1307 RF exempt devices Duty Cycle Justification Under FCC §15.231(a), intentional radiators are restricted to short-duration, event-driven transmissions, and continuous operation is explicitly prohibited. Shown below are the measurements taken during testing to prove that there is an automatic deactivation within 5 seconds. Reference Element report number MRND0001.0 Rev 1. 418 MHz OOK Automatic Deactivation within 5s Marker 1R: Power button pressed Marker 1: Power button released Report No. MRND0001.1 Rev 016/12 RF EXPOSURE CONDITION 2018-07-17 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Portable Location on Body (if applicable) Limb How is the Device Used Device is handheld and used at arm's length Radios Contained in the Same Host Device Periodic Simultaneous Transmitting Radios None Body Worn Accessories None Environment General Population/Uncontrolled Exposure Report No. MRND0001.1 Rev 017/12 EXEMPTION FROM RF EXPOSURE EVALUATION EXRPT.2025.09.03.0 OVERVIEW Section 1.3 of KDB 44798 D04 v01 states that, “Under the new rules, all radio services and operations are subject to Routine Evaluation [§§ 1.1307(b)(1), 2.1033(f), etc.], unless shown to qualify under the exemptions provided in the rules and OET Lab policies for equipment authorization.” The glossary of KDB 447498 D04 v01 specifies that an exempt RF device is defined “solely from the obligation to perform a routine environmental evaluation to demonstrate compliance with the RF exposure limits in § 1.1310; it is no…

Text truncated - open the document above for the full version.

– 1 – Revised 1/3/2017 Recommended Footprint Recommended Mounting 38.86 mm (1.53 in) 6.32 mm (0.25 in) No ground plane or traces under the antenna Ground plane on bottom layer for counterpoise 50-ohm microstrip line Vias to ground plane PCB pads for the Splatch 15.48 mm (0.57 in) 37.85 mm (1.49 in) 98.55 mm (3.88 in) 83.57 mm (3.29 in) 0.51 mm (0.02 in) 0.51 mm (0.02 in) Product Description The Splatch uses a grounded-line technique to achieve outstanding performance from a tiny surface-mount element. This unique antenna is designed for hand or reflow-mounting directly to a product’s circuit board. Its low cost makes it ideal for volume applications. Unlike many compact antennas, the Splatch exhibits good proximity performance, making it an appropriate choice for handheld applications such as remote controls, pagers and alert devices. Features sVery low cost sUltra-compact package sDirect PCB attachment sIdeal for concealed / internal mounting sPerfect for compact portable devices sSuitable for hand or reflow-assembly sResistant to proximity effects (OHFWULFDO6SHFLĬFDWLRQV Center Frequency: 418MHz Recom. Freq. Range: 414 – 422MHz Bandwidth: 8MHz Wavelength: ¼-wave VSWR: d 1.9 typ. at center Peak Gain: –8dBi Impedance: 50-ohms Connection: Surface-mount Oper. Temp. Range: –40°C to +130°C Electrical specifications and plots measured on 3.8 cm x 8.4 cm (1.50” x 3.30”) reference ground plane. Ordering Information ANT-418-SP (supplied in tubes of 20 pieces) ANT-418-SP-T (Tape and reel of 500 pieces) ANT-418-SP Data Sheet by 27.94 mm (1.10") 1.5 mm (0.06") 13.7 mm (0.54") 5.1 mm (0.20") 1.27 mm (0.05") 2.03 mm (0.08") 5.1 mm (0.20") 2.54 mm (0.10") Please see AN-00502 for more details on PCB layout. – 2 – Copyright © 2017 Linx Technologies 159 Ort Lane, Merlin, OR 97532 Phone: +1 541 471 6256 Fax: +1 541 471 6251 www.linxtechnologies.com Counterpoise Quarter-wave or monopole antennas require an associated ground plane counterpoise for proper operation. The size and location of the ground plane relative to the antenna will affect the overall performance of the antenna in the final design. When used in conjunction with a ground plane smaller than that used to tune the antenna, the center frequency typically will shift higher in frequency and the bandwidth will decrease. The proximity of other circuit elements and packaging near the antenna will also affect the final performance. For further discussion and guidance on the importance of the ground plane counterpoise, please refer to Linx Application Note AN-00501: Understanding Antenna Specifications and Operation. VSWR Graph by ANT-418-SP Data Sheet 3:1 2:1 1:1 380.5MHz418MHz455.5MHz VSWR1.090 25% 11% 0% Reflected Power What is VSWR? The Voltage Standing Wave Ratio (VSWR) is a measurement of how well an antenna is matched to a source impedance, typically 50-ohms. It is calculated by measuring the voltage wave that is headed toward the load versus the voltage wave that is reflected back from the load. A perfect match has a VSWR of 1:1. The higher the first number, the worse the match, and the more inefficient the system. Since a perfect match cannot ever be obtained, some benchmark for performance needs to be set. In the case of antenna VSWR, this is usually 2:1. At this point, 88.9% of the energy sent to the antenna by the transmitter is radiated into free space and 11.1% is either reflected back into the source or lost as heat on the structure of the antenna. In the other direction, 88.9% of the energy recovered by the antenna is transferred into the receiver. As a side note, since the “:1” is always implied, many data sheets will remove it and just display the first number. How to Read a VSWR Graph VSWR is usually displayed graphically versus frequency. The lowest point on the graph is the antenna’s operational center frequency. In most cases, this is different than the designed center frequency due to fabrication tolerances. The VSWR at that point denotes how close to 50-ohms the antenna gets. Linx specifies the recommended bandwidth as the range where the typical antenna VSWR is less than 2:1. te.com TE Connectivity, TE, TE connectivity (logo), Linx and Linx Technologies are trademarks owned or licensed by the TE Connectivity Ltd. family of companies. All other logos, pr oducts and/or company names ref erred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustr ations and schematics which are intended for illustr ation purposes only, is believed to be reliable. However , TE Connectivity makes no warranties as to its accurac y or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, r esale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. TE Connectivity warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and limitations TE Connectivity will, at its option, either repair or replace any part of its products that prove defective because of improper workmanship or materials. This limited warranty is in for ce for the useful lifetime of the original end product into which the TE Connectivity product is installed. Useful lifetime of the original end product may vary but is not warrantied to exceed one (1) year from the original date of the end product purchase. ©2023 TE Connectivity. All Rights Reserved. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 La tin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 Fr ance: +33 (0) …

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. This report is Blockchain Verified. To verify the report’s authenticity, please visit https://www.blockchain-verified.com/ or by clicking the logo to the right. Dometic Marine Canada Inc Dometic Key Fob FCC 15.231:2026 RSS-210 Issue 11:2024 RSS-Gen Issue 5:2018+A1:2019+A2:2021 Low Power Radio Report: MRND0001.0 Rev. 2, Issue Date: July 16, 2026 TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Test ............................................................................................ 3 Revision History .............................................................................................. 5 Facilities .......................................................................................................... 6 Measurement Uncertainty ............................................................................... 7 Test Setup Block Diagrams ............................................................................. 8 Product Description ......................................................................................... 11 Power Settings and Antennas ......................................................................... 12 Configurations ................................................................................................. 13 Modifications ................................................................................................... 14 Field Strength of Fundamental ........................................................................ 15 Spurious Radiated Emissions ......................................................................... 18 Emissions Bandwidth and Occupied Bandwidth ............................................. 24 Duty Cycle ....................................................................................................... 27 End of Report .................................................................................................. 30 Report No. MRND0001.0 Rev 022/30 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: March 3, 2026 Dometic Marine Canada Inc EUT: Dometic Key Fob Radio Equipment Testing Standards Specification Method FCC 15.231:2026 ANSI C63.10-2020 + Cor. 1-2023 RSS-210 Issue 11:2024 ANSI C63.10-2020 + Cor. 1-2023 + C63.10a-2024 + Errata to C63.10a-2024 RSS-Gen Issue 5:2018+A1:2019+A2:2021 Results Test Description Result FCC Section(s) RSS Section(s) ANSI C63.10 Section(s) Comments Powerline Conducted Emissions (Transmitter) N/A 15.207 RSS-Gen 8.8 6.2 Not required for a battery powered EUT. Field Strength of Fundamental Pass 15.231(b) or (e) RSS-210 A1.3, A1.5 6.5, 6.6 Spurious Radiated Emissions Pass 15.231(b) or (e) RSS-210 A1.3, A1.5 6.4, 6.5, 6.6 Emissions Bandwidth Pass 15.231(c) N/A 6.9.2 Periodic Technical Requirements N/A 15.231(a) RSS-210 A1.2 7.4e Not required to test. If applicable, this is addressed by an attestation in the equipment theory of operation. Duty Cycle Pass 15.231 RSS-210 A1.2 7.5 Powerline Conducted Emissions (Receiver) N/A 15.101, 15.107 RSS-Gen 7.2 ANSI C63.4 - 12.2.4 Not included per FCC 15.101 as this will be covered under SDoC rules for the FCC. RSS-Gen section 7 stated receiver requirements only apply to standalone receivers operating in the 30-960 MHz band and this is not a standalone receiver. Radiated Emissions for Receiver N/A 15.101, 15.109 RSS-Gen 7.3 ANSI C63.4 - 12.2.5 Not included per FCC 15.101 as this will be covered under SDoC rules for the FCC. RSS-Gen section 7 stated receiver requirements only apply to standalone receivers operating in the 30-960 MHz band and this is not a standalone receiver. Occupied Bandwidth Pass N/A RSS-210 A1.4 6.9.3 Report No. MRND0001.0 Rev 023/30 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Deviations From Test Standa…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS WTD.2025.08.28.0 Direct Connect TEST SETUP PHOTOS WTD.2025.08.28.0 Radiated Test Setup TEST SETUP PHOTOS WTD.2025.08.28.0 Horz On Side TEST SETUP PHOTOS WTD.2025.08.28.0 Vert