2BK4QP3200Portable Power Station

Portable Power Station 1. Please keep dry and stay away from fire. 2. Do not disassemble, puncture or squeeze the portable power station. 3. Please recycle and dispose of the product in accordance with local laws and regulations. 4. Please hand it over to a professional recycling company to dispose this portable power station. 5. Children and the disabled please use this product with guardian. WARNING Model: P3200 USER MANUAL V3.0 Get to Know Your Product Charging Your Product Using Your Product Product Specifications Product Error Code Package Content Caution Cold Weather Usage Disposal And Recycle Disclaimer 03 04 07 12 13 15 15 15 16 16 CONTENTS 01 Glad you're using this portable Power Station, before starting using this product, please read the instructions carefully! Attention Specifications and images in this manual are for reference only. This product is for emergency use only; it is not a standard replacement for normal AC house power. Actual AC outlets could be different depending on the location of the customer. Fully charge the product before using it for the first time. 02 Get to Know Your Product 10 11 12 4 5 7 8 9 6 1 2 3 10 11 12 13 14 15 16 3 2 1 4 5 7 8 9 6 Handle LCD Display LED PD 30W TYPE-C Output Port PD 100W TYPE-C Output Port DC ON/OFF Switch DC Output port Car port LED Button USB-A Output Port Power Button AC ON/OFF Switch AC Output Port AC Input Port Switch DC Input Port(XT60i) 13 14 15 03 24V/10A13.2V/10A DC 13.2V/8ADC 13.2V/8A 16 Charging Your Product LCD Battery Display The screen will display the remaining charging time and the percentage of battery power level. When the percentage of power level is 100% and the charging power is 0, the product is fully charged. If either the room (ambient) temperature or the temperature of the battery gets too high, the battery charging circuit will automatically shut down. When the temperature falls below 122 degrees °F (50 degrees °C), the battery will automatically resume charging. If it is not used for a long time, it is best to fully charge it every three months before storing it. If it has not been used for half of a year, please fully charge the product before use. It is best to fully charge each charge. ATTENTION 04 INPUT Hours ER Mins Watts Supercharge OUTPUT Watts % abcde f g h i j l m n o p k r S tu q s t u o p r q a b c d e f g % Battery Power Level % Battery Power Level AC output voltage and error codes Iuput Power Low temperature protection Over temperature protection AC output frequency Flashlight Type-C Output DC OutputSmart Power Mode LED Fast Charging Solar Panel Input AC Input USB-A Output AC automatically shuts off WIFI Bluetooth Remaining Usage Time/ Remaining charging Time Output Power Auto INPUT Watts Hours Mins h i j l m n k Supercharge OUTPUT Watts ER 1. Charge Through Solar Panel 1. Place your solar panel where it will get as much strong direct sunlight as possible. 2. Connect the output port of the solar panel with the input port of the product to start charging. You will know the product is being charged when the icon on the LCD turns on. The product is fully charged when capacity level reaches 100% and the incon INPUT blinks. ATTENTION: 1. The actual charging efficiency may vary widely depending on weather, ambient temperature, sunlight's strength, the angle that the solar panels face to the straight sunlight, and other factors. 2. Use solar panels below 80V for charging, it will automatically cut off when input higher than 82V. 05 06 2. Charge Through AC 3. Charge Through Your Car Connect the AC outlet and P3200's AC input port with the original AC charging cable, you will see the battery is in charging status and know the input power, the remaining charging time and the current battery power level. ATTENTION: 1. The battery is fully charged when the percentage of the battery is 100% and input power is 0 and remains still. After the battery is fully charged, it is best to unplug the charging cables. The battery will not overcharge, but removing the cables is the best way. 2. When charged by AC, it takes around 12-1.5 hours to be fully charged. 1. Plug the car charging cable provided with the battery into the cigarette lighter socket of your car. Then plug the another end of the cable into the DC input port of the battery. 2. The car charger cable provided with the battery has a 10A protection fuse to protect your car. 3. The screen will show input power and remaining recharging time while the battery is being charged. ATTENTION: To avoid car battery power loss, you should charge this product through your car cigarette lighter socket only when your car engine is started. This function is for 12V/24V cars only. 24V/10A13.2V/10A DC 13.2V/8ADC 13.2V/8A Using Your Product 1. Button Power Button AC Button DC Button LED Light Button 1. Power Button 1. Long press the power button for 3 seconds to turn the P3200 on/off. 2. This machine would automatically shut down after 10 minute’s standby status, which prevents wasting its power. 3. After using, long press the power button for 3 seconds to shut down. ATTENTION: 1. ATTENTION: 07 When the product is started, double-click the power button to turn on the AC automatic shutdown function, and the icon will light up at the same time. When the product is off, double-click the power button to turn off the AC automatic shutdown function, and the icon will disappear at the same time. When you need to use electrical appliances with intermittent power supply for a long time, please turn off the AC automatic shutdown function!! Long press the AC button to enter Smart Power Mode; double-press the AC button 5 times consecutively to switch the device’s AC output voltage; press and hold the AC+DC buttons simultaneously for 3 seconds to switch the device’s AC output frequency. 2. AC on/off Button Short press the AC button to turn on the AC function (the AC icon will be displayed on the screen at the same time ). Short press the AC button again to turn off the AC function.…

Text truncated - open the document above for the full version.

Portable Power Station 1. Please keep dry and stay away from fire. 2. Do not disassemble, puncture or squeeze the portable power station. 3. Please recycle and dispose of the product in accordance with local laws and regulations. 4. Please hand it over to a professional recycling company to dispose this portable power station. 5. Children and the disabled please use this product with guardian. WARNING Model: P3200 USER MANUAL V3.0 Get to Know Your Product Charging Your Product Using Your Product Product Specifications Product Error Code Package Content Caution Cold Weather Usage Disposal And Recycle Disclaimer 03 04 07 12 13 15 15 15 16 16 CONTENTS 01 Glad you're using this portable Power Station, before starting using this product, please read the instructions carefully! Attention Specifications and images in this manual are for reference only. This product is for emergency use only; it is not a standard replacement for normal AC house power. Actual AC outlets could be different depending on the location of the customer. Fully charge the product before using it for the first time. 02 Get to Know Your Product 10 11 12 4 5 7 8 9 6 1 2 3 10 11 12 13 14 15 16 3 2 1 4 5 7 8 9 6 Handle LCD Display LED PD 30W TYPE-C Output Port PD 100W TYPE-C Output Port DC ON/OFF Switch DC Output port Car port LED Button USB-A Output Port Power Button AC ON/OFF Switch AC Output Port AC Input Port Switch DC Input Port(XT60i) 13 14 15 03 24V/10A13.2V/10A DC 13.2V/8ADC 13.2V/8A 16 Charging Your Product LCD Battery Display The screen will display the remaining charging time and the percentage of battery power level. When the percentage of power level is 100% and the charging power is 0, the product is fully charged. If either the room (ambient) temperature or the temperature of the battery gets too high, the battery charging circuit will automatically shut down. When the temperature falls below 122 degrees °F (50 degrees °C), the battery will automatically resume charging. If it is not used for a long time, it is best to fully charge it every three months before storing it. If it has not been used for half of a year, please fully charge the product before use. It is best to fully charge each charge. ATTENTION 04 INPUT Hours ER Mins Watts Supercharge OUTPUT Watts % abcde f g h i j l m n o p k r S tu q s t u o p r q a b c d e f g % Battery Power Level % Battery Power Level AC output voltage and error codes Iuput Power Low temperature protection Over temperature protection AC output frequency Flashlight Type-C Output DC OutputSmart Power Mode LED Fast Charging Solar Panel Input AC Input USB-A Output AC automatically shuts off WIFI Bluetooth Remaining Usage Time/ Remaining charging Time Output Power Auto INPUT Watts Hours Mins h i j l m n k Supercharge OUTPUT Watts ER 1. Charge Through Solar Panel 1. Place your solar panel where it will get as much strong direct sunlight as possible. 2. Connect the output port of the solar panel with the input port of the product to start charging. You will know the product is being charged when the icon on the LCD turns on. The product is fully charged when capacity level reaches 100% and the incon INPUT blinks. ATTENTION: 1. The actual charging efficiency may vary widely depending on weather, ambient temperature, sunlight's strength, the angle that the solar panels face to the straight sunlight, and other factors. 2. Use solar panels below 80V for charging, it will automatically cut off when input higher than 82V. 05 06 2. Charge Through AC 3. Charge Through Your Car Connect the AC outlet and P3200's AC input port with the original AC charging cable, you will see the battery is in charging status and know the input power, the remaining charging time and the current battery power level. ATTENTION: 1. The battery is fully charged when the percentage of the battery is 100% and input power is 0 and remains still. After the battery is fully charged, it is best to unplug the charging cables. The battery will not overcharge, but removing the cables is the best way. 2. When charged by AC, it takes around 12-1.5 hours to be fully charged. 1. Plug the car charging cable provided with the battery into the cigarette lighter socket of your car. Then plug the another end of the cable into the DC input port of the battery. 2. The car charger cable provided with the battery has a 10A protection fuse to protect your car. 3. The screen will show input power and remaining recharging time while the battery is being charged. ATTENTION: To avoid car battery power loss, you should charge this product through your car cigarette lighter socket only when your car engine is started. This function is for 12V/24V cars only. 24V/10A13.2V/10A DC 13.2V/8ADC 13.2V/8A Using Your Product 1. Button Power Button AC Button DC Button LED Light Button 1. Power Button 1. Long press the power button for 3 seconds to turn the P3200 on/off. 2. This machine would automatically shut down after 10 minute’s standby status, which prevents wasting its power. 3. After using, long press the power button for 3 seconds to shut down. ATTENTION: 1. ATTENTION: 07 When the product is started, double-click the power button to turn on the AC automatic shutdown function, and the icon will light up at the same time. When the product is off, double-click the power button to turn off the AC automatic shutdown function, and the icon will disappear at the same time. When you need to use electrical appliances with intermittent power supply for a long time, please turn off the AC automatic shutdown function!! Long press the AC button to enter Smart Power Mode; double-press the AC button 5 times consecutively to switch the device’s AC output voltage; press and hold the AC+DC buttons simultaneously for 3 seconds to switch the device’s AC output frequency. 2. AC on/off Button Short press the AC button to turn on the AC function (the AC icon will be displayed on the screen at the same time ). Short press the AC button again to turn off the AC function.…

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.:STS2603362H01 Issued for Zhuhai Initial Entropy Energy Co.,Ltd. 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Product Name: Portable Power Station Brand Name: N/A Model Name: P3200 Series Model(s): F3200, B3200, E3200, T3200, U3200, H3200, G3200, S3200, X3200, C3200, L3200, K3200, M3200, N3200, V3200, A3200 FCC ID: 2BK4QP3200 Test Standard: FCC 47CFR §2.1091 Page 2 of 7 Report No.: STS2603362H01 TEST REPORT Applicant’s Name ................. : Zhuhai Initial Entropy Energy Co.,Ltd. Address ................................. : 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Manufacturer's Name ........... : Zhuhai Initial Entropy Energy Co.,Ltd. Address ................................. : 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Product Description Product Name ........................ : Portable Power Station Brand Name .......................... : N/A Model Name .......................... : P3200 Series Model(s) ...................... : F3200, B3200, E3200, T3200, U3200, H3200, G3200, S3200, X3200, C3200, L3200, K3200, M3200, N3200, V3200, A3200 Test Standards ..................... : FCC 47CFR §2.1091 447498 D01 Interim General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 5 Dec. 2025 Date (s) of performance of tests ............. : 5 Dec. 2025 ~ 30 Mar. 2026 Date of Issue .......................................... : 30 Mar. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 7 Report No.: STS2603362H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1091 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 7 Page 4 of 7 Report No.: STS2603362H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 30 Mar. 2026 STS2603362H01 ALL Initial Issue Page 5 of 7 Report No.: STS2603362H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Portable Power Station Brand Name N/A Model Name P3200 Series Model(s) F3200, B3200, E3200, T3200, U3200, H3200, G3200, S3200, X3200, C3200, L3200, K3200, M3200, N3200, V3200, A3200 Model Difference All models are identical except for the model name, the test model is P3200. Product Description The EUT is a Portable Power Station Operation Frequency: 2402~2480 MHz 802.11b/g/n20: 2412~2462 MHz 802.11n40:2422~2452MHz Modulation Type: GFSK 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-Q AM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-Q AM 802.11b/g Support SISO 802.11n Support SISO Antenna gain: -1 dBi Antenna Designation: Internal Antenna Power Rating AC 120V/60Hz/DC 51.2V from battery Adapter N/A Battery DC 51.2V Hardware Version N/A Software Version N/A 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 7 Report No.: STS2603362H01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC §1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT According to FCC §1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 300 - 1500 -- -- F/300 3.0-30 1842/f 4.89/f *(900/f²) 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 300 - 1500 -- -- F/1500 1.34-30 824/f 2.19/f *(180f²) 1500 – 100000 -- -- 1.0 F= Frequency in MHz Friis Formula Friis Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. Page 7 of 7 Report No.: STS2603362H01 2.3 TEST RESULT Tune up Mode Detector Tune up Power BLE Peak 2±1dBm 2.4G WIFI Peak 12±1dBm Note: 1. The Maximum power is less than the limit, complies with the exemption requirements. 2. The Bluetooth and WLAN can’t simultaneous transmission at the same time. 3. ERP = EIRP - 2.15 ※※※※※END OF THE REPORT※※※※※ Protocol Fre. (GHz) Separati on distance (cm) Max Tune up power (dBm) Max power (mW) Power Density (mW/cm²) Limit (mW/ cm²) Ratio Res…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID:2BK4QP3200 Conducted emissions 30MHz-1GHz Page 2 of 2 FCC ID:2BK4QP3200 Spurious emissions

Page 1 of 2 FCC ID:2BK4QP3200 Conducted emissions 30MHz-1GHz Page 2 of 2 FCC ID:2BK4QP3200 Spurious emissions

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2603362W02 Issued for Zhuhai Initial Entropy Energy Co.,Ltd. 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Product Name: Portable Power Station Brand Name: N/A Model Name: P3200 Series Model(s): F3200, B3200, E3200, T3200, U3200, H3200, G3200, S3200, X3200, C3200, L3200, K3200, M3200, N3200, V3200, A3200 FCC ID: 2BK4QP3200 Test Standards: FCC Part15.247 Page 2 of 76 Report No.: STS2603362W02 TEST REPORT Applicant’s Name ................. : Zhuhai Initial Entropy Energy Co.,Ltd. Address ................................. : 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Manufacturer's Name ........... : Zhuhai Initial Entropy Energy Co.,Ltd. Address ................................. : 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Product Description Product Name ........................ : Portable Power Station Brand Name ........................... : N/A Model Name .......................... : P3200 Series Model(s) .................... : F3200, B3200, E3200, T3200, U3200, H3200, G3200, S3200, X3200, C3200, L3200, K3200, M3200, N3200, V3200, A3200 Standards ............................. : FCC Part 15.247 Test Procedure........................: ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 5 Dec. 2025 Date (s) of performance of tests ............. : 5 Dec. 2025 ~ 30 Mar. 2026 Date of Issue .......................................... : 30 Mar. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 76 Report No.: STS2603362W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 11 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 12 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 13 3. EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.2 RADIATED EMISSION MEASUREMENT 18 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 31 4.1 LIMIT 31 4.2 TEST PROCEDURE 31 4.3 DEVIATION FROM STANDARD 31 4.4 TEST SETUP 31 4.5 EUT OPERATION CONDITIONS 31 4.6 TEST RESULTS 31 5. POWER SPECTRAL DENSITY TEST 32 5.1 LIMIT 32 5.2 TEST PROCEDURE 32 5.3 DEVIATION FROM STANDARD 32 5.4 TEST SETUP 32 5.5 EUT OPERATION CONDITIONS 32 5.6 TEST RESULTS 32 6. BANDWIDTH TEST 33 6.1 LIMIT 33 6.2 TEST PROCEDURE 33 6.3 DEVIATION FROM STANDARD 33 6.4 TEST SETUP 33 6.5 EUT OPERATION CONDITIONS 33 Page 4 of 76 Report No.: STS2603362W02 Table of Contents Page 6.6 TEST RESULTS 33 7. PEAK OUTPUT POWER TEST 34 7.1 LIMIT 34 7.2 TEST PROCEDURE 34 7.3 DEVIATION FROM STANDARD 34 7.4 TEST SETUP 34 7.5 EUT OPERATION CONDITIONS 34 7.6 TEST RESULTS 34 8. ANTENNA REQUIREMENT 35 8.1 STANDARD REQUIREMENT 35 8.2 EUT ANTENNA 35 APPENDIX 1-TEST DATA 36 APPENDIX 2-PHOTOS OF TEST SETUP 76 Page 5 of 76 Report No.: STS2603362W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 30 Mar. 2026 STS2603362W02 ALL Initial Issue Page 6 of 76 Report No.: STS2603362W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 76 Report No.: STS2603362W02 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 76 Report No.: STS2603362W02 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Portable Power Station Brand Name N/A Model Name P3200 Series Model(s) F3200, B3200, E3200, T3200, U3200, H3200, G32…

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2603362W02 Issued for Zhuhai Initial Entropy Energy Co.,Ltd. 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Product Name: Portable Power Station Brand Name: N/A Model Name: P3200 Series Model(s): F3200, B3200, E3200, T3200, U3200, H3200, G3200, S3200, X3200, C3200, L3200, K3200, M3200, N3200, V3200, A3200 FCC ID: 2BK4QP3200 Test Standards: FCC Part15.247 Page 2 of 76 Report No.: STS2603362W02 TEST REPORT Applicant’s Name ................. : Zhuhai Initial Entropy Energy Co.,Ltd. Address ................................. : 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Manufacturer's Name ........... : Zhuhai Initial Entropy Energy Co.,Ltd. Address ................................. : 8th floor, A4 Harbour 7, Jintang Road, High-tech district, Zhuhai City, Guangdong Province, China Product Description Product Name ........................ : Portable Power Station Brand Name ........................... : N/A Model Name .......................... : P3200 Series Model(s) .................... : F3200, B3200, E3200, T3200, U3200, H3200, G3200, S3200, X3200, C3200, L3200, K3200, M3200, N3200, V3200, A3200 Standards ............................. : FCC Part 15.247 Test Procedure........................: ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 5 Dec. 2025 Date (s) of performance of tests ............. : 5 Dec. 2025 ~ 30 Mar. 2026 Date of Issue .......................................... : 30 Mar. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 76 Report No.: STS2603362W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 11 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 12 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 13 3. EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.2 RADIATED EMISSION MEASUREMENT 18 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 31 4.1 LIMIT 31 4.2 TEST PROCEDURE 31 4.3 DEVIATION FROM STANDARD 31 4.4 TEST SETUP 31 4.5 EUT OPERATION CONDITIONS 31 4.6 TEST RESULTS 31 5. POWER SPECTRAL DENSITY TEST 32 5.1 LIMIT 32 5.2 TEST PROCEDURE 32 5.3 DEVIATION FROM STANDARD 32 5.4 TEST SETUP 32 5.5 EUT OPERATION CONDITIONS 32 5.6 TEST RESULTS 32 6. BANDWIDTH TEST 33 6.1 LIMIT 33 6.2 TEST PROCEDURE 33 6.3 DEVIATION FROM STANDARD 33 6.4 TEST SETUP 33 6.5 EUT OPERATION CONDITIONS 33 Page 4 of 76 Report No.: STS2603362W02 Table of Contents Page 6.6 TEST RESULTS 33 7. PEAK OUTPUT POWER TEST 34 7.1 LIMIT 34 7.2 TEST PROCEDURE 34 7.3 DEVIATION FROM STANDARD 34 7.4 TEST SETUP 34 7.5 EUT OPERATION CONDITIONS 34 7.6 TEST RESULTS 34 8. ANTENNA REQUIREMENT 35 8.1 STANDARD REQUIREMENT 35 8.2 EUT ANTENNA 35 APPENDIX 1-TEST DATA 36 APPENDIX 2-PHOTOS OF TEST SETUP 76 Page 5 of 76 Report No.: STS2603362W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 30 Mar. 2026 STS2603362W02 ALL Initial Issue Page 6 of 76 Report No.: STS2603362W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 76 Report No.: STS2603362W02 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 o…

Text truncated - open the document above for the full version.