2BK4U-A350Smart Projector

• Please read the manual before use and keep it well for future reference. • Prompt: The illustrations of products, accessories, and user interface in the Manual are schematics for reference only. 2. If the user doesn't utilize this product for a long time or encounters thunderstorm weather, please unplug the power plug from the socket to avoid damage. 3. Do not place flammable materials near the device to avoid causing a fire. 4. If there is dust on the surface of the lens, please blow it with clean air and do not wipe the lens with fingers, cloth, paper, etc. to avoid damaging the lens. 5. The projector is a precision device, please do not drop it. Please place the device on a stable desktop, stand, or platform during use to prevent it from falling and causing device damage or personal injury. 6. This device emits strong light during operation. Please do not look directly at the lens to avoid eye injury. 7. Avoid disassembling this device as there is a dangerous high voltage inside that may cause personal injury. If requiring maintenance, please make sure to hand it over to trained or authorized maintenance personnel for repair. 8. Do not allow this device to be exposed to rain or immersed in water or other liquids. In the event that any liquid or solid object enters the interior of the casing, please immediately unplug the power plug and ask a dedicated technical service personnel to inspect it. 9. Avoid utilizing in the following environments: a) Extremely hot, cold, or humid environments; b) In narrow spaces with poor ventilation; c) Near any device that generates a strong magnetic field; d) Direct sunlight exposure. Instructions for Safe UseIntroduction Appearance Packing list Projector Power cordUser Manual User Manual Remote control Lens Camera Power button/ indicator Air inlet Heat dissipation port Sound outlet 4 foot pads 4 M6 lifting nuts When lifting is required, please remove the 4 foot pads to expose the lifting nuts Projection angle adjustment nut Interface Remote control ① ② ③ ④ ① IR receiver head ②③ USB Communication protocol device interface ④ Headphone jack ⑤⑥ HD signal input interface ⑦ AV signal input interface ⑧ Power cable interface For first use, please pair according to this method: Find Bluetooth in the settings and turn it on, then hold down the left and right keys or long press the voice key, and then click the voice assistant to show that it is connected and paired. Note: 1. Before using the remote control, please install the battery correctly according to the positive and negative poles. 2. The optimal distance for using a remote control is within 5 meters. 3. The voice function needs to be initialized and used online. ⑤⑥⑦ 1. Power key 2. Signal source key 3. Confirmation key 4. Direction button 5. Mouse button 6. Backspace 7. Function setting key 8. Volume increase and decrease 9. Focus addition and subtraction 10. Homepage key 11. Mute key Use 30cm 30cm30cm 1. Pay attention to heat dissipation To maintain the performance and reliability of the projector, please leave at least 30cm of space between the projector and surrounding objects. 2. Pay attention to your eyes The projector has high brightness. Please do not look directly or avoid using the projector to illuminate people's eyes, as it may cause vision damage. Note: 1. Formal front projection 2.lifting front projection Projection method Functional use Precautions: Functional use 1. Projection setting Functional use 3. Manual focusing 4.WIFI connection I. Warranty Period II. The warranty content III. Non-warranty regulations IV. Projector Performance Fault Table 2. Obstacle avoidance and entry precautions: The new factory projector has made the following presets for several core settings that affect the image There are four projection methods to choose from, including "formal front projection, lifting front projection, formal back projection, and lifting front projection." The preset is " formal front projection". The projection screen can be freely scaled. The preset "autofocus" function is turned on, and the image projected by the projector will be automatically adjusted to the clearest. The preset "automatic trapezoidal correction" function is turned on, and the image projected by the projector will be automatically corrected. To meet the needs of most viewing projector scenes, the "automatic obstacle avoidance" function is preset to be turned off. In situations with a screen, following the prompts can automatically fill the entire screen with the image Automatic obstacle avoidance requires that obstacles cannot exceed two or more squares on the chessboard on the screen, that is, obstacles cannot be within the red box in the following picture. When entering the screen, it is important to ensure that all four corners of the screen are within the white area of the screen, and the corners circled are shown in the following figure. During the use of the projector, slight movement may cause slight virtual focus. The amplitude of the movement before and after the virtual focus does not trigger automatic focusing of the projector, and manual focusing of the image is required. Press the "F+" or "F -" keys on the remote control to adjust the lens focus. Tap or hold the focus button until the image is clear (as shown below) Functional use Basic parameter Troubleshooting Projector warranty instructions Name and content of hazardous substances in the product 4. More settings: Press Navigation Key for more Settings This projector strictly complies with the Consumer Rights Protection Law of the People's Republic of China and the Product Quality Law of the People's Republic of China to provide three guarantee services. The content is as follows: 1. Within 7 days from the day after you sign for the product, if there are any performance faults listed in the "Projector Performance Fault Table", you can enjoy free return or exchange services after being tested and confirmed by our after-sales service center. 2. Within …

Text truncated - open the document above for the full version.

Huizhou Yueyao Technology Co., Ltd. Unit 01,Floor 7,Building 10,Meilonghu Intelligent Manufacturing Industrial New Town,Xinxu Town,Huiyang District,Huizhou City,Guangdong Province,China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-9-19 To whom it may concern: We, Huizhou Yueyao Technology Co., Ltd., hereby certify that the equipment for which authorization is sought (FCC ID: 2BK4U-A350) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Merry Liu Manager Huizhou Yueyao Technology Co., Ltd. 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

Huizhou Yueyao Technology Co., Ltd. Unit 01, Floor 7, Building 10, Meilonghu Intelligent Manufacturing Industrial New Town, Xinxu Town, Huiyang District, Huizhou City, Guangdong Province, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024/09/14 U.S. Agent Designation Huizhou Yueyao Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BK4U-A350): Name and company of U.S. agent: GSS SERVICE INC Physical U.S. address of agent: 6547 N Academy Blvd #2266 Colorado Springs COLORADO 80918 United States FRN of U.S. agent: 0033402082 Email address of U.S. agent: [email protected] GSS SERVICE INC acknowledges their obligation to accept service of process on behalf of Huizhou Yueyao Technology Co., Ltd. Huizhou Yueyao Technology Co., Ltd. with the FRN [0035944719] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Merry Liu Manager Huizhou Yueyao Technology Co., Ltd. Signature Michoux Logan PM GSS SERVICE INC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

Huizhou Yueyao Technology Co., Ltd. Add: Unit 01,Floor 7,Building 10,Meilonghu Intelligent Manufacturing Industrial New Town,Xinxu Town,Huiyang District,Huizhou City,Guangdong Province,China Date: 2024-9-19 FCC ID: 2BK4U-A350 Dear Sir/Madam, We, Huizhou Yueyao Technology Co., Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Smart Projector Model no.: A350, A350-S, A350-O, A350-M, A350-X, A350-Pro, OS-RA01, P1 Sincerely, Name/Title： Merry Liu/Manager Company: Huizhou Yueyao Technology Co., Ltd. Address: Unit 01,Floor 7,Building 10,Meilonghu Intelligent Manufacturing Industrial New Town,Xinxu Town,Huiyang District,Huizhou City,Guangdong Province,China Phone: 18038066871 Fax: N/A E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-9-19> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BK4U-A350 A350 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Merry Liu/Manager Company: Huizhou Yueyao Technology Co., Ltd. Address: Unit 01,Floor 7,Building 10,Meilonghu Intelligent Manufacturing Industrial New Town,Xinxu Town,Huiyang District,Huizhou City,Guangdong Province,China Phone: 18038066871 Fax: N/A E-Mail: [email protected]

Huizhou Yueyao Technology Co., Ltd. Unit 01,Floor 7,Building 10,Meilonghu Intelligent Manufacturing Industrial New Town,Xinxu Town,Huiyang District,Huizhou City,Guangdong Province,China Date: 2024-9-19 FCC ID: 2BK4U-A350 Model Number: A350 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Huizhou Yueyao Technology Co., Ltd., declare that this EUT (FCC ID: 2BK4U-A350) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： Merry Liu/Manager Company: Huizhou Yueyao Technology Co., Ltd. Address: Unit 01,Floor 7,Building 10,Meilonghu Intelligent Manufacturing Industrial New Town,Xinxu Town,Huiyang District,Huizhou City,Guangdong Province,China Phone: 18038066871 Fax: N/A E-Mail: [email protected]

Huizhou Yueyao Technology Co., Ltd. Unit 01,Floor 7,Building 10,Meilonghu Intelligent Manufacturing Industrial New Town,Xinxu Town,Huiyang District,Huizhou City,Guangdong Province,China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-9-19 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BK4U-A350 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Merry Liu/Manager Company: Huizhou Yueyao Technology Co., Ltd. Address: Unit 01,Floor 7,Building 10,Meilonghu Intelligent Manufacturing Industrial New Town,Xinxu Town,Huiyang District,Huizhou City,Guangdong Province,China Phone: 18038066871 Fax: N/A E-Mail: [email protected]

FCC ID: 2BK4U-A350 External Photos of the EUT FCC ID: 2BK4U-A350 FCC ID: 2BK4U-A350

Label and Location Size: L: 4.0cm*W: 3.0cm Label and Location FCC ID : 2BK4U-A350

FCC ID: 2BK4U-A350 Internal Photos of the EUT FCC ID: 2BK4U-A350 FCC ID: 2BK4U-A350 BT+WIFI ANT WIFI ANT FCC ID: 2BK4U-A350 FCC ID: 2BK4U-A350 FCC ID: 2BK4U-A350 FCC ID: 2BK4U-A350 FCC ID: 2BK4U-A350

RF Exposure evaluation FCC ID: 2BK4U-A350 Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. Antenna Information A350 can only use antennas certificated as follows provided by manufacturer; Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: BT / PIFA antenna 1.25dBi for 2400-2500MHz; 2.4GWIFI / PIFA antenna 1.25dBi for 2400-2500MHz for ANT 1 0.92dBi for 2400-2500MHz for ANT 2 5.2GWIFI / PIFA antenna 1.18dBi for 5180-5240MHz for ANT 1 1.35dBi for 5180-5240MHz for ANT 2 5.8GWIFI / PIFA antenna 1.01dBi for 5745-5825MHz for ANT 1 1.08dBi for 5745-5825MHz for ANT 2 5. Manufacturing Tolerance Mode Max. Peak Conducted Output Power (dBm) Max. tune-up BT -1.07 -1.0±1 Mode Max. Peak Conducted Output Power (dBm) Max. tune-up Antenna0 Antenna1 Antenna0 Antenna1 2.4GWIFI 14.36 14.74 14±1 14±1 Mode Max. Average Conducted Output Power (dBm) Max. tune-up Antenna0 Antenna1 Antenna0 Antenna1 5.2GWIFI 12.98 13.26 13±1 13±1 5.8GWIFI 12.9 13.16 13±1 13±1 6. Standalone MPE Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is refer to section 4, the RF power density can be obtained. ANT1 Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW BT 0.0 1.0000 1.25 1.3335 0.0003 1.0000 2.4GWIFI 15.0 31.6228 1.25 1.3335 0.0084 1.0000 5.2GWIFI 14.0 25.1189 1.18 1.3122 0.0066 1.0000 5.8GWIFI 14.0 25.1189 1.01 1.2618 0.0063 1.0000 ANT2 Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW 2.4GWIFI 15.0 31.6228 0.92 1.2359 0.0078 1.0000 5.2GWIFI 14.0 25.1189 1.35 1.3646 0.0068 1.0000 5.8GWIFI 14.0 25.1189 1.08 1.2823 0.0064 1.0000 Remark: 1. Output power (Peak) including turn-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer. 7. simultaneous MPE Result 2.4GWIFI ANT1 MPE (Ratio) 2.4GWIFI ANT2 MPE (Ratio) simultaneous MPE (Ratio) MPE Limits (Ratio) 0.0084 0.0078 0.0162 1.0000 8. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

1. Antenna Description: Antenna type PIFA antenna Model A350 Frequency range 2400-2500MHz, 5180-5240MHz, 5745-5825MHz Manufacturer Huizhou Yueyao Technology Co., Ltd. ANT Peak Gain 2400-2500MHz: 1.25 dBi 5180-5240MHz: 1.18 dBi 5745-5825MHz: 1.01 dBi 2. Antenna Photo: Length :26.23mm Width:12.75mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz 5180MHz 5220MHz 5240MHz 5745MHz 5785MHz 5825MHz

1. Antenna Description: Antenna type PIFA antenna Model A350 Frequency range 2400-2500MHz, 5180-5240MHz, 5745-5825MHz Manufacturer Huizhou Yueyao Technology Co., Ltd. ANT Peak Gain 2400-2500MHz: 0.92 dBi 5180-5240MHz: 1.35 dBi 5745-5825MHz: 1.08 dBi 2. Antenna Photo: Length :26.27mm Width:13.05mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz 5180MHz 5220MHz 5240MHz 5745MHz 5785MHz 5825MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID............................................. : CTA24090601202 2BK4U-A350 Compiled by ( position+printed name+signature) . : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) . : Project Engineer Xudong Zhang Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Sep. 11, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Huizhou Yueyao Technology Co., Ltd. Address ............................................ : Unit 01, Floor 7, Building 10, Meilonghu Intelligent Manufacturing Industrial New Town, Xinxu Town, Huiyang District, Huizhou City, Guangdong Province, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator .................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Smart Projector Trade Mark ....................................... : N/A Manufacturer .................................... : Huizhou Yueyao Technology Co., Ltd. Model/Type reference ...................... : A350 Listed Models .................................. : A350-S, A350-O, A350-M, A350-X, A350-Pro, OS-RA01, P1 Modulation Type ............................... : CCK/DSSS/OFDM Operation Frequency ........................ : From 2412 - 2462MHz Rating ............................................... : AC 110V-240V 50/60Hz Result ............................................... : PASS Report No.: CTA24090601202 Page 2 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Smart Projector Model /Type : A350 Series Model No. A350-S, A350-O, A350-M, A350-X, A350-Pro, OS-RA01, P1 Applicant : Huizhou Yueyao Technology Co., Ltd. Address : Unit 01, Floor 7, Building 10, Meilonghu Intelligent Manufacturing Industrial New Town, Xinxu Town, Huiyang District, Huizhou City, Guangdong Province, China Manufacturer : Huizhou Yueyao Technology Co., Ltd. Address : Unit 01, Floor 7, Building 10, Meilonghu Intelligent Manufacturing Industrial New Town, Xinxu Town, Huiyang District, Huizhou City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24090601202 Page 3 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I RO N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 11 4.1 AC Power Conducted Emission 11 4.2 Radiated Emission 14 4.3 Maximum Peak Conducted Output Power 20 4.4 Power Spectral Density 22 4.5 6dB Bandwidth 30 4.6 Out-of-band Emissions 38 4.7 Antenna Requirement 63 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 64 6 P H O T O S O F T H E E U T ........................................................... 65 Report No.: CTA24090601202 Page 4 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v05r02: Guidance for Compliance Measurements on Digital Transmission Systems (DTS) ,Fr…

Text truncated - open the document above for the full version.

Report No.: CTA24090601202 Page 40 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11b 802.11g Reference Reference CH011 CH01 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 41 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11g Reference Reference CH06 CH11 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 42 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 Reference Reference CH01 CH06 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 43 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 802.11n40 Reference Reference CH11 CH03 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 44 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n40 Reference Reference CH06 CH09 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 45 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11ax20 Reference Reference CH01 CH06 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 46 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11ax20 802.11ax40 Reference Reference CH11 CH03 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 47 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11ax40 Reference Reference CH06 CH09 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 48 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Ant2: 802.11b Reference Reference CH01 CH06 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 49 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11b 802.11g Reference Reference CH011 CH01 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 50 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11g Reference Reference CH06 CH11 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 51 of 65 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 Reference Reference CH01 CH06 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24090601202 Page 52 of 65 Shenzhen CTA Testing Te…

Text truncated - open the document above for the full version.