2BK84-BTBSU01bidet toilet seat

Attestation Statements (September 20, 2024) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC ID: 2BK84-BTBSU01 (Xiamen Shanling Intelligent Home Technology Co., Ltd.), the undersigned, hereby authorize (NEWENERGYER LIMITED) to act as our designated U.S. agent for service of process, (Xiamen Shanling Intelligent Home Technology Co., Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (NEWENERGYER LIMITED) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information： Company name: Xiamen Shanling Intelligent Home Technology Co., Ltd. Contact Name: Jingqiang Huang Address: 4th Floor-6, Factory Building, No. 101 Huizuo Road, Haicang District, Xiamen City Telephone No: 13538214502 Email: [email protected] FRN: 0035973254 Signature [Jingqiang Huang] U.S. Agent Information: Company Name: NEWENERGYER LIMITED Address: 1818 S Patton Ct, Denver, CO, 80219 Contact Name: CHUN LIU Telephone No: 213 289 5042 Email: [email protected] FRN: 0034665885 Signature [CHUN LIU]

Xiamen Shanling Intelligent Home Technology Co., Ltd. (September 20, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BK84-BTBSU01 [Xiamen Shanling Intelligent Home Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Jingqiang Huang Xiamen Shanling Intelligent Home Technology Co., Ltd. (September 20, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BK84-BTBSU01 [Xiamen Shanling Intelligent Home Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Jingqiang Huang

Xiamen Shanling Intelligent Home Technology Co., Ltd. Model Difference Data：September 20, 2024 Product description: bidet toilet seat Model name: BTBS-U01, BTBS-V01 Trade Name: ONON FCC ID: 2BK84-BTBSU01 All the model are the same circuit and RF module, only the name and appearance are different. Regards Sincerely Client’s signature : Client’s name / title : Jingqiang Huang（Engineer） Contact information / address：4th Floor-6, Factory Building, No. 101 Huizuo Road, Haicang District, Xiamen City

Xiamen Shanling Intelligent Home Technology Co., Ltd. (September 20, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (bidet toilet seat / BTBS-U01, BTBS-V01 / FCC ID: 2BK84-BTBSU01 ) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Jingqiang Huang Title: Engineer

Xiamen Shanling Intelligent Home Technology Co., Ltd. (September 20, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Jingqiang Huang Title: Engineer

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 Model: BTBS-U01 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4

FCC ID LABEL: Label Location: FCC ID: 2BK84-BTBSU01 Model No.: BTBS-U01

Shenzhen CTB Testing Co., Ltd. FCC ID:2BK84-BTBSU01 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 433.919MHz Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion ASK 0.43392 -26.3 0.0023 -26±1 -25.00 0.0032 <5 0.00042 3.00 YES Note:dbm=dbuv/m-95.2-2.15=72.05-95.2-2.15=-25.3dBm(ERP), so the conduct peak power=- 25.3-1=-26.3dBm Conclusion: For the max result : 0.00042≤ FCC Limit 3.0 for 1g SAR.

ANT PHTOT All measurements were performed radiated and therefore additional antenna gain documentation is not required.

TEST REPORT Compiled by: Reviewed by: Approved by: Zhou Kui Arron Liu Bin Mei / Director The test report is effective only with both signature and specialized stamp. This result(s) shown in this report r Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: bidet toilet seat FCC ID: 2BK84-BTBSU01 Trademark: ONON Model Number: BTBS-U01, BTBS-V01 Prepared For: Xiamen Shanling Intelligent Home Technology Co., Ltd. Address: 4th Floor-6, Factory Building, No. 101 Huizuo Road, Haicang District, Xiamen City Manufacturer: Xiamen Shanling Intelligent Home Technology Co., Ltd. Address: 4th Floor-6, Factory Building, No. 101 Huizuo Road, Haicang District, Xiamen City Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Aug. 07, 2024 Sample tested Date: Aug. 07, 2024 to Sep. 11, 2024 Issue Date: Sep. 11, 2024 Report No.: CTB240911051RFX Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.231 ANSI C63.10:2013 Test Results PASS Remark: This is 433MHz radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB240911051RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 24 TABLE OF CONTENT Test Report Declaration Page 1. VERSION .......................................................................................................................................... 3 2. TEST SUMMARY ............................................................................................................................. 4 3. MEASUREMENT UNCERTAINTY ................................................................................................... 5 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................. 6 4.1 Product Information ............................................................................................................................ 6 4.2 Test Setup Configuration ................................................................................................................... 6 4.3 Support Equipment ............................................................................................................................ 6 4.4 Test Mode .......................................................................................................................................... 6 4.5 Test Environment ............................................................................................................................... 6 5. TEST FACILITY AND TEST INSTRUMENT USED ......................................................................... 7 5.1 Test Facility ........................................................................................................................................ 7 5.2 Test Instrument Used ......................................................................................................................... 7 6. AC POWER LINE CONDUCTED EMISSION .................................................................................... 9 6.1 Block Diagram Of Test Setup ............................................................................................................. 9 6.2 Limit .................................................................................................................................................... 9 6.3 Test procedure ................................................................................................................................... 9 6.4 Test Result ....................................................................................................................................... 10 7. RADIATED EMISSION ................................................................................................................... 11 7.1 Block Diagram Of Test Setup ........................................................................................................... 11 7.2 Limit .................................................................................................................................................. 11 7.3 Test procedure ................................................................................................................................. 12 7.4 Test Result ....................................................................................................................................... 13 8. DWELL TIME .................................................................................................................................. 19 8.1 Block Diagram Of Test Setup ........................................................................................................... 19 8.2 Limit .................................................................................................................................................. 19 8.3 Test procedure ................................................................................................................................. 19 8.4 Test Result ....................................................................................................................................... 20 9. OCCUPIED BANDWIDTH .........................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 1 Model: BTBS-U01 Radiated Emission Below 1G Above 1G