
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.
Shen zhen shi nai bo ke ji you xian gong si Tai ran 6 lu, tai ran cang song da sha 9 ceng 918, tian an she qu, sha tou jie dao, fu tian qu , shen zhen shi ,Guang dong sheng ,CN 518040 China Date: 9/27/2024 Federal Communications Commission Authorization Room 408, Lippo Sun Plaza, 28 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong. FCC ID: 2BK95-MASG00001 FRN: 0035983253 US Agent – Attestation Statement / Part 2.911(d)(7) Shen zhen shi nai bo ke ji you xian gong si certifies, that as of [9/27/2024], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BK95- MASG00001 Shen zhen shi nai bo ke ji you xian gong si, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Shen zhen shi nai bo ke ji you xian gong si for FCC ID: 2BK95-MASG00001 Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Shen zhen shi nai bo ke ji you xian gong si Designated Agent: FCC US Agent, LLC Company Representative: Ken Quan Designated Agent Representative: Tim Payne Signature: Signature:
Shen zhen shi nai bo ke ji you xian gong si (September 29, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 ATTN.: Eye Massager FCC ID: 2BK95-MASG00001 Shen zhen shi nai bo ke ji you xian gong si certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Shen zhen shi nai bo ke ji you xian gong si certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Name Ken Quan Position Supply Chain Manager Company Name Shen zhen shi nai bo ke ji you xian gong si Address Tai ran 6 lu, tai ran cang song da sha 9 ceng 918, tian an she qu, sha tou jie dao, fu tian qu ,shen zhen shi ,Guang dong sheng ,CN 518040 Tel +8615012692727 Fax +8615012692727 Email [email protected]
Shen zhen shi nai bo ke ji you xian gong si (September 29, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Eye Massager / ZC-Masg00001-Grey # 2BK95-MASG00001 #) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Schematics, Block diagram, Operation description) required to be submitted with this application be permanently withheld from public review. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any information you may need. Sincerely, Signature: Name Ken Quan Position Supply Chain Manager Company Name Shen zhen shi nai bo ke ji you xian gong si Address Tai ran 6 lu, tai ran cang song da sha 9 ceng 918, tian an she qu, sha tou jie dao, fu tian qu ,shen zhen shi ,Guang dong sheng ,CN 518040 Tel +8615012692727 Fax +8615012692727 Email [email protected]
Shen zhen shi nai bo ke ji you xian gong si (September 29, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen Alpha Product Testing Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name Ken Quan Position Supply Chain Manager Company Name Shen zhen shi nai bo ke ji you xian gong si Address Tai ran 6 lu, tai ran cang song da sha 9 ceng 918, tian an she qu, sha tou jie dao, fu tian qu ,shen zhen shi ,Guang dong sheng ,CN 518040 Tel +8615012692727 Fax +8615012692727 Email [email protected]
FCC ID: 2BK95-MASG00001 FCC ID: 2BK95-MASG00001 FCC ID: 2BK95-MASG00001 FCC ID: 2BK95-MASG00001 FCC ID: 2BK95-MASG00001 FCC ID: 2BK95-MASG00001
2cm 1cm Label Location FCC ID: 2BK95-MASG00001 Shen zhen shi nai bo ke ji you xian gong si Product name: Eye Massager Model No.: ZC-Masg00001-Grey This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID : 2BK95-MASG00001 FCC ID : 2BK95-MASG00001 FCC ID : 2BK95-MASG00001 BT ANT FCC ID : 2BK95-MASG00001 FCC ID : 2BK95-MASG00001
FCC ID: 2BK95-MASG00001 RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Worse case is as below: [2440MHz: -2.795dBm(0.525mW) output power] (0.525mW /5mm) ·[√2.440 (GHz)]= 0.164 <3.0 for 1-g SAR Then SAR evaluation is not required
ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 4008300895 Website: http://www.a-lab.cn/certificate FCC TEST REPORT FCC ID: 2BK95-MASG00001 On Behalf of Shen zhen shi nai bo ke ji you xian gong si Eye Massager Model No.: ZC-Masg00001-Grey Prepared for : Shen zhen shi nai bo ke ji you xian gong si Address : Tai ran 6 lu, tai ran cang song da sha 9 ceng 918, tian an she qu, sha tou jie dao, fu tian qu ,shen zhen shi ,Guang dong sheng ,CN 518040 Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China Report Number : A2409171-C01-R02 Date of Receipt : September 20, 2024 Date of Test : September 20, 2024 - June 26, 2024 Date of Report : September 26, 2024 Version Number : V0 Test Result : Pass Page 2 of 57 Report No.: A2409171-C01-R02 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results ............................................................................................ 6 1.1. Description of Standards and Results ..................................................................................... 6 2. General Information ........................................................................................................................ 7 2.1. Description of Device (EUT) .................................................................................................... 7 2.2. Accessories of Device (EUT) .................................................................................................. 8 2.3. Tested Supporting System Details .......................................................................................... 8 2.4. Block Diagram of connection between EUT and simulators ................................................... 8 2.5. Test Mode Description ............................................................................................................. 8 2.6. Test Conditions ........................................................................................................................ 9 2.7. Test Facility .............................................................................................................................. 9 2.8. Measurement Uncertainty ....................................................................................................... 9 2.9. Test Equipment List ............................................................................................................... 10 3. Maximum Peak Output power...................................................................................................... 12 3.1. Limit ....................................................................................................................................... 12 3.2. Test Procedure ...................................................................................................................... 12 3.3. Test Setup .............................................................................................................................. 12 3.4. Test Result ............................................................................................................................. 12 4. Bandwidth ...................................................................................................................................... 13 4.1. Limit ....................................................................................................................................... 13 4.2. Test Procedure ...................................................................................................................... 13 4.3. Test Result ............................................................................................................................. 13 5. Carrier Frequency Separation ..................................................................................................... 21 5.1. Limit ....................................................................................................................................... 21 5.2. Test Procedure ...................................................................................................................... 21 5.3. Test Result ............................................................................................................................. 21 6. Number Of Hopping Channel ....................................................................................................... 23 6.1. Limit ....................................................................................................................................... 23 6.2. Test Procedure ...................................................................................................................... 23 6.3. Test Result ............................................................................................................................. 23 7. Dwell Time ..................................................................................................................................... 25 7.1. Test limit ................................................................................................................................. 25 7.2. Test Procedure ...................................................................................................................... 25 7.3. Test Result ............................................................................................................................. 25 8. Radiated emissions ...................................................................................................................... 32 8.1. Limit ..............................................................................................…
Text truncated - open the document above for the full version.
2.4G-2.48G频段板载PIFA天线测试报告 SPECIFICATIONS Frequency(MHz)2400-2480 PeakGain(dBi)2.499 AverageGain(dBi)>-4 VSWR<3.2 Impedance(Ω)50Ω AntennaTypePlannarInvertedFAntennaonboard PolarizationLinear Z X Y 天线实物及物理尺寸 天线无源S参数: 驻波比(VSWR)、回波损耗(ReturnLoss)及史密斯圆图 天线效率及增益 Frequency(MHz)Gain(dBi)Effciency(%)AverageGain(dBi)Efficiency(dB) 24001.43359.329%-2.717-2.267 24100.92751.861%-3.416-2.852 24200.82952.112%-3.166-2.831 24300.88149.299%-3.258-3.072 24401.19250.672%-3.144-2.952 24501.68853.067%-2.735-2.752 24602.19459.423%-2.276-2.260 24702.11856.680%-2.438-2.466 24802.49961.727%-2.112-2.095 Average1.52954.908%-2.806-2.616 Peak2.49961.727%-2.112-2.095 天线2440MHz2D-ThetaPattern 天线 2440MHz2D-PhiPattern 天线2440MHz3D-HorizontalPattern 天线 2440MHz3D-VerticalPattern 2440MHz3D-TotalPattern
FCC ID: 2BK95-MASG00001 Photo of Radiated Emission test FCC ID: 2BK95-MASG00001 Photo of Conducted Emission test
Building i, No.2, Lixin Road, Fuyong Street, Bao · Shenzhen · China
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 470.00 µW |