2BKBL-RS08-SYDGarage Smart Security Cam

Garage LED Light Smart Security Cam Quick Start Guide APP Download Search for “IPC360 Home” on the Apple App Store or Google Play Store (not “IPC360”) and install it on your phone. Note: In order to use all the features of the product, the App will ask for some relevant authorization from your mobile phone after the installation. For example, the voice intercom function needs the use of the microphone of your phone, and the message pushing system needs background support of your phone, etc. To ensure the normal interaction between the App and the product, please allow the authorization requests. Sign up ⚫Tap “No Account? Sign up” on the homepage of the App. ⚫After entering the “Sign up” page, choose the country where the product will be used. ⚫Enter an available email address as your account name of the App, and then tap “Obtain” to receive a verification code. You can find the code in your email box then input it in the App. ⚫Set your account password. ⚫Put a tick to agree with the “User Agreement” and “Privacy policy”. ⚫Tap “Sign Up” to complete. ⚫Login to your account. Add Device ⚫Tap “Add Device” or the “+” icon in the upper right corner to start. ⚫Confirm the region where you are currently and then tap “Next”. ⚫Scan the QR code label on the product to access to the next page. Make sure the product is powered on and in ready status (Red indicating light is flashing). Put a tick in the box and tap “Next”. ⚫Tap “Join” to connect to the hotspot network of the product and wait 10-15 seconds. After the App confirms that the network is normal, it will jump to the next page. ⚫Select a strong Wi-Fi network, enter the correct Wi-Fi password and then tap “OK”. ⚫Wait for the completion of paring and Select your desired installation place. ⚫Name the device properly, which will be shown on the list of all your products. Note: The two-pin screw adapter in the box is designed for easy testing and pre installation. Please make sure to use the adapter to power on the product and connect it to your Wi-Fi by following the steps above. After the pairing is successful, remove the adapter and install the product in the position where you planned. The product will automatically reconnect to your Wi-Fi. After the reconnection is successful, please check the strength of Wi-Fi signal in the app once you play the live video. To ensure the stability of network transmission., it is recommended that the installation location of the product should be within the strongest range of Wi-Fi. Function Microphone: Tap the icon to turn on/off the function. When you are testing the product nearly, please turn off the microphone to avoid reflecting noise. Landscape mode：Tap the icon to switch to landscape mode. Resolution: The product supports dual streaming resolutions. It is recommended to use SD mode when the rate is below 50KB/s, and the FHD mode when the rate is above 50KB/s to ensure the fluency of the video. (For the specific resolution, please refer to the actual environment of the product) Code stream: “IPC360 Home” uses randomly encrypted data based on Amazon AWS cloud to transmit video to ensure the security of surveillance videos. Time stamp: The time stamp on the video is generated by the product, generally in accordance with the mobile phone system. Share: The owner can share the product to 5 sub-accounts totally in the app and control the permission grant of sharing time validity, SD card video playback, voice intercom, PTZ control, motion alarm, etc. Custom group: When there are multiple devices under the account, you can browse up to 4 surveillance videos at the same time in the same screen by setting up a custom group. Device setting: Tap the icon to check detailed information or set functions. Access to the setting page: Device Info. ⚫Device Name: Rename the device. ⚫Device Use: Rename the location where the device is installed. ⚫Device Model: Factory model number. ⚫UUID: Device ID. Please provide the ID when you ask for technical support. ⚫Firmware version: The firmware version of the device. ⚫Internet Connection: The way of connection (wifi or wired). ⚫WiFi Network: The Wi-Fi ssid that is connected to. ⚫WiFi Signal Strength: 3 bars means strong signal strength while 1 bar indicates weak strength. ⚫IP Address: The IP address of the device. Setting of device alarm ⚫Smart AI Detection: Precisely identification function of humans, vehicles and pets. (Optional charging functions, you can check more details in the app) ⚫Alarm Push Notifications: The function Includes “Text notifications” and “Rich notifications”. Text notifications only show a text alarm message, while rich notifications would display the first frame of an alarm video. You need to insert an SD card previously or subscribe the Cloud service to enable the rich notification function. The notification function is still valid when the app is shut down unless you disable the function or log out your account. ⚫Senitivity: There are 4 levels of alarm sensitivity from 1 (Very Low) to 4 (High). The default setting is 3 (Medium)，You can adjust the setting according to your actual environment. For example, you can try to lower the sensitivity to 1 if there are too many ineffective moving objects around. ⚫Alarm Time: The time period setting when the alarm function is enabled. ⚫Alarm Sound：When any effective target triggers the alarm, the voice broadcast sound will be generated to warn the intruder. There are 6 kinds of broadcast voices for your options to fit the actual environment and. The volume can be adjusted from 0-100. Select to rotate the video to fit your actual installation position. Set the volumn of the device. ⚫Device Connect Sound: Voice broadcast when the deviced is connected online. ⚫Video On/Off Sound: Voice broadcast when browsing the live video. The function is off by default. ⚫Camera Speaker Volume: Adjust the volumn of the device speaker by sliding from 1-100. ⚫Camera Microphone: Turn on/off the microphone of the device. When you are t…

Text truncated - open the document above for the full version.

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: NingHai RaySee Video Technology Co., Ltd Address: No. 585 Haizhang Road, Jiyi Village, Xidian Town, Ninghai County, Ningbo City, ZheJiang 315600, China Phone: +86-13600438595 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-09-06 Signature Date Name / Title: Jianping Wu / General Manager Company: NingHai RaySee Video Technology Co., Ltd Address: No. 585 Haizhang Road, Jiyi Village, Xidian Town, Ninghai County, Ningbo City, ZheJiang 315600, China Phone: +86-13600438595 Fax: N/A E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BKBL-RS08-SYD RS08-SYD, RS08-SYD-RX, RS08-SYD4, RS08-SYD4-RX We, applicant Company Name: NingHai RaySee Video Technology Co., Ltd Address: No. 585 Haizhang Road, Jiyi Village, Xidian Town, Ninghai County, Ningbo City, ZheJiang 315600, China Phone: +86-13600438595 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-09-06 Signature Date Name / Title: Jianping Wu / General Manager Company: NingHai RaySee Video Technology Co., Ltd Address: No. 585 Haizhang Road, Jiyi Village, Xidian Town, Ninghai County, Ningbo City, ZheJiang 315600, China Phone: +86-13600438595 Fax: N/A E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BKBL-RS08-SYD RS08-SYD, RS08-SYD-RX, RS08-SYD4, RS08-SYD4-RX For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-09-06 Signature Date Name / Title: Jianping Wu / General Manager Company: NingHai RaySee Video Technology Co., Ltd Address: No. 585 Haizhang Road, Jiyi Village, Xidian Town, Ninghai County, Ningbo City, ZheJiang 315600, China Phone: +86-13600438595 Fax: N/A E-Mail: [email protected]

Page 1 of 1 Rev.2.0 NingHai RaySee Video Technology Co., Ltd WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BKBL-RS08-SYD Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo- location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Jianping Wu / General Manager Signature: Phone: +86-13600438595 Email: [email protected] Date: 2024-09-06

NingHai RaySee Video Technology Co., Ltd No. 585 Haizhang Road, Jiyi Village, Xidian Town, Ninghai County, Ningbo City, ZheJiang 315600, China Date: September 06, 2024 FCC ID: 2BKBL-RS08-SYD Model Number: RS08-SYD, RS08-SYD-RX, RS08-SYD4, RS08-SYD4-RX To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, NingHai RaySee Video Technology Co., Ltd hereby declare that our product (Garage Smart Security Cam) Model Number: RS08-SYD, RS08-SYD-RX, RS08-SYD4, RS08-SYD4-RX board, Schematic, Hardware version, Software version, structure and internal photos are same, named and appearance differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name / Title: Jianping Wu / General Manager Company: NingHai RaySee Video Technology Co., Ltd Address: No. 585 Haizhang Road, Jiyi Village, Xidian Town, Ninghai County, Ningbo City, ZheJiang 315600, China Phone: +86-13600438595 Fax: N/A E-Mail: [email protected]

Page 1 of 3 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 3 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 3 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6

Page 1 of 1 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L 4.0cm x W 4.0cm) Label Location Garage Smart Security Cam Model: RS08-SYD FCC ID: 2BKBL-RS08-SYD

Page 1 of 3 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 3 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Antenna Page 3 of 3 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6

Page 1 of 4 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Maximum Permissible Exposure Report 1. Product Information Applicant : NingHai RaySee Video Technology Co., Ltd Address : No. 585 Haizhang Road, Jiyi Village, Xidian Town, Ninghai County, Ningbo City, ZheJiang China FCC ID : 2BKBL-RS08-SYD EUT : Garage Smart Security Cam Test Model : RS08-SYD Additional Model No. : RS08-SYD-RX, RS08-SYD4, RS08-SYD4-RX Model Declaration : PCB board, structure and internal of these model(s) are the same, So no additional models were tested Ratings : Input: 100-240V~, 50/60Hz, 2500mA Hardware Version : / Software Version : / WIFI(2.4G Band) : Frequency Range : 2412MHz-2462MHz Channel Spacing : 5MHz Channel Number : 11 Channels for 20MHz bandwidth (2412~2462MHz) 7 Channels for 40MHz bandwidth (2422~2452MHz) Modulation Type : IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n: OFDM (64QAM, 16QAM, QPSK, BPSK) Antenna Description : External Antenna, 2.38dBi(Max.) Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Mobile Device 2. Evaluation Method and Limit Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. Page 2 of 4 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 3. Refer Evaluation Method 3. 1 Refer Evaluation Method ANSI C95.1–2019: IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices. 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Uncontrolled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information EUT can only use antennas certificated as follows provided by manufacturer; Internal/External Identification Antenna type and antenna number Operate frequency band Maximum antenna gain Notes Antenna External Antenna 2400MHz~2500MHz 2.38dBi WIFI Antenna Page 3 of 4 FCC ID: 2BKBL-RS08-SYD Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 6. Conducted Power [2.4G WLAN] Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) IEEE 802.11b 1 2412 15.04 6 2437 15.31 11 2462 15.6 IEEE 802.11g 1 2412 14.79 6 2437 14.34 11 2462 14.36 IEEE 802.11n HT20 1 2412 13.23 6 2437 13.28 11 2462 13.85 IEEE 802.11n HT40 3 2422 12.38 6 2437 12.53 9 2452 12.01 7. Manufacturing Tolerance IEEE 802.11b(Peak) Channel Channel 01 Channel 06 Channel 11 Target (dBm) 15.0 15.0 15.0 Tolerance ± (d…

Text truncated - open the document above for the full version.

QR/RD-P01-06B SPECIFICATION ShenzhenGuandetongElectronicLimited ShenzhenGuandetongElectronicsCo.,LTD 2.4G(2.38DB)purewhiteantennawithsmallbuckleterminals Productspecificationbook Guest household Frequency segment 2400MHz——2500MHz NameofwireEdition A1 Customer partnumber Crownpass materialnumber Guandetong number RFdesign XiaoBin Rfmanager LiuLiang Structural design WangDong Structure manager WangHua Technical director YeDingkun Dayperiod 2022-12-16 Customerconfirmation： Whethertheassemblymeetsyourcompany'srequirements ：□ OK □ NG ShenzhenGuandetongElectronicsCo.,LTD Securityisrequired TheCompanyhasproprietarytechnologyprovidedbytheinformation,suchproprietaryinformationshouldbestrictlyconfidential, withoutthepriorwrittenconsentofShenzhenCrownElectronicsCo.,Ltd.isnotallowedtodisclosetoanypersonorcompany. Address:3rdFloor,BuildingD,MaoyuanIndustrialPark,HuanguanSouth,GuanhuStreet,LonghuaDistrict, ShenzhenTel:0755-88298396Fax:0755-89733896 http://www.szgdtrf.com Page2 catalogue Sealing surface............................................................................................................1 catalogue........................................................................................2 一．Productpicture..........................................................................3 二．Productparameter.................................................................3 三、S11 data.. .................................................................................4 四、 Applechart,directionchart ..............................................................5 五、Environmentalreliabilitytestreport..................................6 六、ConnectorBOMtable.......................................................... ShenzhenGuandetongElectronicsCo.,LTD Securityisrequired TheCompanyhasproprietarytechnologyprovidedbytheinformation,suchproprietaryinformationshouldbestrictlyconfidential, withoutthepriorwrittenconsentofShenzhenCrownElectronicsCo.,Ltd.isnotallowedtodisclosetoanypersonorcompany. Address:3rdFloor,BuildingD,MaoyuanIndustrialPark,HuanguanSouth,GuanhuStreet,LonghuaDistrict, ShenzhenTel:0755-88298396Fax:0755-89733896 http://www.szgdtrf.com Page3 一、 Productpicture 二、Productparameter Producttestparameter Productname(Name) 2.4GGluestick antenna 产品型号(ModelType) GDT-2.4G/1553 电性能指标(ElectricalSpecifications) 频率范围(FrenquencyRange) 2400MHz——2500MHz 极化方式 （ Polarization ） perpendicularit y 输入阻抗(Impedance) 50ΩRadiationdirectionomnidirectional 驻波比 （ VSWR ） ≦2.0 功率容量(Power) 50W 增益(Gain) 2.38dBi 带宽(Bandwidth 100MHz 机械指标(MechanicalSpecifications) 尺寸(Dimensions)108±3mm外壳颜色(RadomeColor)白色 连接器型号(Connector) IPEX端子引线长度(CableLength)180±3mm 外壳材料RadomeMaterial ABS 工作温度 (WorkingTemperature) -40°C-+85°C 存放温度 (LimitTemperature) -40°C-+85°C ShenzhenGuandetongElectronicsCo.,LTD Securityisrequired TheCompanyhasproprietarytechnologyprovidedbytheinformation,suchproprietaryinformationshouldbestrictlyconfidential, withoutthepriorwrittenconsentofShenzhenCrownElectronicsCo.,Ltd.isnotallowedtodisclosetoanypersonorcompany. Address:3rdFloor,BuildingD,MaoyuanIndustrialPark,HuanguanSouth,GuanhuStreet,LonghuaDistrict, ShenzhenTel:0755-88298396Fax:0755-89733896 http://www.szgdtrf.com Page4 三、S11（ VSWR 、 Returnloss 、 Smith ） data ShenzhenGuandetongElectronicsCo.,LTD Securityisrequired TheCompanyhasproprietarytechnologyprovidedbytheinformation,suchproprietaryinformationshouldbestrictlyconfidential, withoutthepriorwrittenconsentofShenzhenCrownElectronicsCo.,Ltd.isnotallowedtodisclosetoanypersonorcompany. Address:3rdFloor,BuildingD,MaoyuanIndustrialPark,HuanguanSouth,GuanhuStreet,LonghuaDistrict, ShenzhenTel:0755-88298396Fax:0755-89733896 http://www.szgdtrf.com Page5 四、Applechart,directionchart ShenzhenGuandetongElectronicsCo.,LTD Securityisrequired TheCompanyhasproprietarytechnologyprovidedbytheinformation,suchproprietaryinformationshouldbestrictlyconfidential, withoutthepriorwrittenconsentofShenzhenCrownElectronicsCo.,Ltd.isnotallowedtodisclosetoanypersonorcompany. Address:3rdFloor,BuildingD,MaoyuanIndustrialPark,HuanguanSouth,GuanhuStreet,LonghuaDistrict, ShenzhenTel:0755-88298396Fax:0755-89733896 http://www.szgdtrf.com Page6 ShenzhenGuandetongElectronicsCo.,LTD Securityisrequired TheCompanyhasproprietarytechnologyprovidedbytheinformation,suchproprietaryinformationshouldbestrictlyconfidential, withoutthepriorwrittenconsentofShenzhenCrownElectronicsCo.,Ltd.isnotallowedtodisclosetoanypersonorcompany. Address:3rdFloor,BuildingD,MaoyuanIndustrialPark,HuanguanSouth,GuanhuStreet,LonghuaDistrict, ShenzhenTel:0755-88298396Fax:0755-89733896 http://www.szgdtrf.com Page7 ShenzhenGuandetongElectronicsCo.,LTD Securityisrequired TheCompanyhasproprietarytechnologyprovidedbytheinformation,suchproprietaryinformationshouldbestrictlyconfidential, withoutthepriorwrittenconsentofShenzhenCrownElectronicsCo.,Ltd.isnotallowedtodisclosetoanypersonorcompany. Address:3rdFloor,BuildingD,MaoyuanIndustrialPark,HuanguanSouth,GuanhuStreet,LonghuaDistrict, ShenzhenTel:0755-88298396Fax:0755-89733896 http://www.szgdtrf.com Page8 五、Environmentalperformancetest 项目 (Project) 测试条件 (Testconditions) 规格 (Specificat ions) 储存环境 (Storage environment) 在没有指定的情况下测试温度、湿度、气压如下： 1.温度为-30°C～+80°C 2.相对湿度为45%-85% 3.气压为86kpa-106kpa (Testtemperature,humidity,andairpressurewithout specifyingasfollows: 1.Thetemperaturerangesfrom-30°Cto+80°C 2.Relativehumidityis45%-85% 3.Theairpressurerangesfrom86kpato16kpa) 电气机械性能正常 (Normalelectrical andmechanical performance) 高低温试验 (Highandlow temperaturetest) 在70°C与40°C之间进行5次循环，然后在正常条件下1-2H，检查 外观质量。 (Perform5cyclesbetween70°Cand40°C,andtheninspect theappearancequalityundernormalconditionsfor1-2 hours.) 尺寸应满足规定并应 满足满足 于机械、电气性能 (Thesizeshould meetthe requirementsand meetthemechanical andelectrical performance.) 耐恒定湿热 试验 (Constant humidityandheat resistancetest) 相对湿度95±3%，试验温度：40°C.持续2H作用后， 试品取出后5min之内测定电气性能，试品在正常条 件下1-2H，检查外观质量 (Relativehumidity95±3%,testtemperature:40°C. After2hoursofcontinuousexposure,theelectrical performanceofthesampleshouldbemeasuredwithin5 min…

Text truncated - open the document above for the full version.

Page 1 of 55 FCC ID: 2BKBL-RS08-SYD Report No.: LCSA08024040EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for 2.4GWIFI (Conducted Measurement) Product Name: Garage Smart Security Cam Test Model: RS08-SYD Environmental Conditions Temperature: 23.8°C Relative Humidity: 52.1% ATM Pressure: 100.0 kPa Test Engineer: Jay Luo Supervised by: Nick Peng Page 2 of 55 FCC ID: 2BKBL-RS08-SYD Report No.: LCSA08024040EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT b 2412 Ant1 8.082 >=0.5 Pass NVNT b 2437 Ant1 9.004 >=0.5 Pass NVNT b 2462 Ant1 8.073 >=0.5 Pass NVNT g 2412 Ant1 16.09 >=0.5 Pass NVNT g 2437 Ant1 16.092 >=0.5 Pass NVNT g 2462 Ant1 16.166 >=0.5 Pass NVNT n20 2412 Ant1 16.837 >=0.5 Pass NVNT n20 2437 Ant1 17.272 >=0.5 Pass NVNT n20 2462 Ant1 17.126 >=0.5 Pass NVNT n40 2422 Ant1 35.417 >=0.5 Pass NVNT n40 2437 Ant1 35.739 >=0.5 Pass NVNT n40 2452 Ant1 35.456 >=0.5 Pass Page 3 of 55 FCC ID: 2BKBL-RS08-SYD Report No.: LCSA08024040EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs -6dB Bandwidth NVNT b 2412MHz Ant1 -6dB Bandwidth NVNT b 2437MHz Ant1 Page 4 of 55 FCC ID: 2BKBL-RS08-SYD Report No.: LCSA08024040EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -6dB Bandwidth NVNT b 2462MHz Ant1 -6dB Bandwidth NVNT g 2412MHz Ant1 Page 5 of 55 FCC ID: 2BKBL-RS08-SYD Report No.: LCSA08024040EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -6dB Bandwidth NVNT g 2437MHz Ant1 -6dB Bandwidth NVNT g 2462MHz Ant1 Page 6 of 55 FCC ID: 2BKBL-RS08-SYD Report No.: LCSA08024040EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591…

Text truncated - open the document above for the full version.