2BKCC-FWRMGENFREEWELL SMARTPHONE GENIUS RIG

E8.129 兔笼说明书 单页105x148mm 双页105x296mm FREEWELL MULTIFUNCTION SMARTPHONE CAGE www.freewellgear.com [email protected] All brands, product names, and logos are trademarks or registered trademarks of their respective companies. Please keep the packaging and all relevant information for future reference. VIDEO GUIDEDIGITAL DOWNLOAD TABLE OF CONTENTS Instructions for use ---------------------------------------- Gebrauchsanweisung ------------------------------------- Istruzioni per l'uso ----------------------------------------- Mode d'emploi --------------------------------------------- Instrucciones de uso -------------------------------------- Instrukcja użycia ------------------------------------------- 使用说明 ------------------------------------------------------ ENG DE IT FR ES CN POL 01-08 09-16 17-24 25-32 33-40 41-48 49-56 FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. QUICK SMARTPHONE INSTALLATION, STABLE AND RELIABLE The smartphone cage is equipped with a quick-lock mechanism, allowing for fast installation of your phone, ensuring stability during use. Whether you are shooting videos or taking photos, you can be confident that every frame will be stable and clear. Step 2: Use the quick-lock mechanisms on the rabbit cage to secure the phone, ensuring it remains stable and does not move. Step 1: Open the quick locking mechanisms on both sides of the rabbit cage, and place the phone face up horizontally inside the cage. ENG 02 Snap Clamp Cold shoe Cold shoe Bluetooth Remote Control Tri Genius Mono Genius Snap Clamp Freewell magnetic Filter slot F Lens Mount Quick connect INNOVATIVE DESIGN, BREAKING TRADITIONS In designing this product, FREEWELL adhered to its innovative principles, breaking away from traditional concepts to bring a multifunctional smartphone cage that is rich in features and highly compatible with various ecosystems. We have redefined the product design style and color scheme, making it more modern and practical. Cold shoe x5 Quick connect x6 1/4 threaded hole x10 * Using the iPhone 15 Pro Max case as a reference, the number of mounts and connections may vary depending on different phone models. ENG 01 IP15PRO Weight Size Cold shoe 180x12x97mm 3 6 10 167x12x91mm (This data is for the phone cage, not including the handle.) 121g132g 6 10 33 4 8 187x7.6x99mm 132g Quick connect 1/4 threaded hole IP15PROMAXS24U TRI GENIUS, MONO GENIUS, MULTIPLE FUNCTIONS360-DEGREE ROTATION, FLEXIBLE SHOOTING The innovative handle design integrates the functions of a tripod and an extension rod, suitable for various shooting scenarios. The handle can be used as a handheld device and can be transformed into a tripod and an extension rod, eliminating the need for additional equipment purchases. The quick-release design requires no tools, making installation and removal very convenient. The tripod can be detached and used separately. The universal 1/4-inch interface can be connected to the rabbit cage, allowing it to be used as a desktop tripod, flexibly meeting various shooting needs. TRI GENIUS Telescopic pole tripod combination The handle is designed with a 360-degree rotation feature, allowing for free angle adjustment to meet different shooting needs. All quick-release interfaces can be switched quickly without auxiliary tools, making shooting more efficient. The quick-release clamp on the tripod handle and the cold shoe module that can mount the Bluetooth remote control can rotate 360 degrees, allowing you to easily adjust to the best angle. DURABLE AND CONSISTENT STYLE The cage is made of aluminum alloy, which is sturdy and durable. The new color scheme extends to the entire series of products, creating a unified family style. These minimalist colors are eye-catching both day and night. its modular design makes it easy to store and carry. The handle can be removed and extended to be used as an extension rod. The tripod can be detached and used separately. It features a universal 1/4-inch screw and an internal threaded hole at the bottom, allowing it to be connected to the tripod and rabbit cage. MONO GENIUS 262mm ENGENG 0304 RICH INTERFACES, UNLIMITED EXPANSION The cage is equipped with a variety of quick-release interfaces, including 10 1/4" threaded holes, 6 quick-release ports, 3 cold shoe mounts, and our unique F Series Press-Twist-Lock Mechanism, wh…

Text truncated - open the document above for the full version.

FREEWELL INDUSTRY COMPANY LIMITED UNIT NO.A222 3F HANG FUNG INDUSTRIAL BUILDING PHASE 2 NO.2G HOK YUEN ST HUNGHOM KL China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-8-29 To whom it may concern: We, FREEWELL INDUSTRY COMPANY LIMITED, hereby certify that the equipment for which authorization is sought (FCC ID: 2BKCC-FWRMGEN) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Meng Lu Manager FREEWELL INDUSTRY COMPANY LIMITED 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-8-29> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BKCC-FWRMGEN FWRMGEN For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Meng Lu/Manager Company: FREEWELL INDUSTRY COMPANY LIMITED Address: UNIT NO.A222 3F HANG FUNG INDUSTRIAL BUILDING PHASE 2 NO.2G HOK YUEN ST HUNGHOM KL China Phone: 13603034005 Fax: N/A E-Mail: [email protected]

FREEWELL INDUSTRY COMPANY LIMITED UNIT NO.A222 3F HANG FUNG INDUSTRIAL BUILDING PHASE 2 NO.2G HOK YUEN ST HUNGHOM KL China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-8-29 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BKCC-FWRMGEN including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Meng Lu/Manager Company: FREEWELL INDUSTRY COMPANY LIMITED Address: UNIT NO.A222 3F HANG FUNG INDUSTRIAL BUILDING PHASE 2 NO.2G HOK YUEN ST HUNGHOM KL China Phone: 13603034005 Fax: N/A E-Mail: [email protected]

Shenzhen HTT Technology Co., Ltd. Report No.: HTT202408136 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 3 Product Name: FREEWELL SMARTPHONE GENIUS RIG Model No.: FWRMGEN EUT Constructional Details External Photo Report No.: HTT202408136 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 2 of 3 Report No.: HTT202408136 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 3 of 3 ------End------

Label and Location Size: L: 1.0cm*W: 0.2cm Label and Location FCC ID : 2BKCC-FWRMGEN

Shenzhen HTT Technology Co., Ltd. Report No.: HTT202408136 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 3 Product Name: FREEWELL SMARTPHONE GENIUS RIG Model No.: FWRMGEN EUT Constructional Details Internal Photo Report No.: HTT202408136 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 2 of 3 ANTENNA Report No.: HTT202408136 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 3 of 3 ------End------

RF Exposure evaluation FCC ID: 2BKCC-FWRMGEN 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Manufacturing tolerance GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) -1.0 0.0 -1.0 Tolerance ±(dB) 1.0 1.0 1.0 Page 2 of 2 2. E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BLE 2.450 5 1.0 1.2589 0.3941<3.0 Yes 3. C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

Lenze Technology Co.,LTD Tel:+86 0755-82031775;25332530 Fax:+86 0755-82713604 26c newspaper west tower, 6008 shennanAvenue,FutianDistrict, Shenzhen City, GuangdongProvince,China GENERAL INFORMATION 1.1 Test Environment Condition Ambient Temperature 19 to 25 °C Ambient Relative 45 to 55 % Humidity Ambient Pressure N/A (Not applicable) 1.2 Announce (1) The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. (2) The test report is invalid if there is any evidence and/or falsification. (3) The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. (4) This document may not be altered or revised in any way unless done so and all revisions are duly noted in the revisions section. (5) Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. Lenze Technology Co.,LTD Tel:+86 0755-82031775;25332530 Fax:+86 0755-82713604 26c newspaper west tower, 6008 shennanAvenue,FutianDistrict, Shenzhen City, GuangdongProvince,China PRODUCT INFORMATION 2.1 Applicant Applicant Lenze Technology Co.,LTD Address d.c., 26c newspaper west tower, 6008 shennanAvenue, Futian District , Contact Person Tony Telephone Number +86 0755-82031775;25332530 Fax Number +86 0755-82713604 E-mail Address [email protected] 2.2 Manufacturer Manufacturer Lenze Technology Co.,LTD Address d.c., 26c newspaper west tower, 6008 shennanAvenue, Futian District , Shenzhen City, Guangdong Province, China Contact Person N/A Telephone Number N/A Fax Number N/A E-mail Address N/A 2.3 General Description for Equipment under Test (EUT) EUT Type Bluetooth Antenna Model Name PCB Antenna Antenna Type PCB Antenna Hardware Version N/A Serial Number N/A Dimensions N/A 2.4 Technical Information Frequency Range 2400MHz~ 2500MHz Test Frequencies 2402MHz, 2441MHz, 2480MHz Lenze Technology Co.,LTD Tel:+86 0755-82031775;25332530 Fax:+86 0755-82713604 26c newspaper west tower, 6008 shennanAvenue,FutianDistrict, Shenzhen City, GuangdongProvince,China SUMMARY OF TEST RESULTS 3.1 Test Standards No. Identity Document Title 1 IEEE149-1979 IEEE Standard Test Procedures for Antennas 3.2Test Verdict Report Section Description Remark ANNEX A.1 Gain And Efficiency -- ANNEX B Radiation Pattern -- 3.3Test Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. Item Uncertainty VSWR(S11) 0.4dB Gain -0.2dB Lenze Technology Co.,LTD Tel:+86 0755-82031775;25332530 Fax:+86 0755-82713604 26c newspaper west tower, 6008 shennanAvenue,FutianDistrict, Shenzhen City, GuangdongProvince,China GENERAL TEST CONFIGURATIONS 4.1 Test Condition Environment Parameter Selected Values During Tests Temperature Voltage Relative Humidity Normal Temperature, Normal Voltage 25°C N/A 51% (NTNV) 4.2 Test Equipment List Description Manufacturer Model Serial No. Cal. Date Cal. Due Vector Network Agilent E5071C MY46103472 2014.09.07 2015.09.06 Analyzer 5*5*5 Full Anechoic SATIMO 5*5*5 N/A 2014.09.05 2015.09.04 Chamber SG24 Multi-probe Antenna Measurement SATIMO SG24-L 1101855-0001 2014.10.25 2015.10.24 System 4.3 Test Setup Lenze Technology Co.,LTD Tel:+86 0755-82031775;25332530 Fax:+86 26c newspaper west tower, 6008 shennan ANNEX A TEST RESULTS A.1 Gain and Efficiency Frequency 2402MHz 2441MHz 2480MHz ANNEX B RADIATION PATTERN 3DPattern Lenze Technology Co.,LTD Fax:+86 0755-82713604 26c newspaper west tower, 6008 shennanAvenue,FutianDistrict, Shenzhen City, GuangdongProvince, TEST RESULTS Gain (dBi) Efficiency (%) -0.08 -0.21 -0.18 RADIATION PATTERN 2402MHZ City, GuangdongProvince,China Efficiency (%) 0.99 1.06 1.12 Lenze Technology Co.,LTD Tel:+86 0755-82031775;25332530 Fax:+86 26c newspaper west tower, 6008 shennan 1D Radiation Pattern PHI =0 Lenze Technology Co.,LTD Fax:+86 0755-82713604 26c newspaper west tower, 6008 shennanAvenue,FutianDistrict, Shenzhen City, GuangdongProvince, 2480MHZ City, GuangdongProvince,China Lenze Technology Co.,LTD Tel:+86 0755-82031775;25332530 Fax:+86 26c newspaper west tower, 6008 shennan PHI =90 THETA = 90 Lenze Technology Co.,LTD Fax:+86 0755-82713604 26c newspaper west tower, 6008 shennanAvenue,FutianDistrict, Shenzhen City, GuangdongProvince, City, GuangdongProvince,China Lenze Technology Co.,LTD Tel:+86 0755-82031775;25332530 Fax:+86 0755-82713604 26c newspaper west tower, 6008 shennanAvenue,FutianDistrict, Shenzhen City, GuangdongProvince,China ANNEX C TEST SETUP PHOTO ANNEX D EUT PHOTO Antenna shape

Shenzhen HTT Technology Co., Ltd. Report No.: HTT202408136F01 This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 28 TEST Report Applicant: FREEWELL INDUSTRY COMPANY LIMITED Address of Applicant: UNIT NO.A222 3F HANG FUNG INDUSTRIAL BUILDING PHASE 2 NO.2G HOK YUEN ST HUNGHOM KL HONG KONG Manufacturer : FREEWELL INDUSTRY COMPANY LIMITED Address of Manufacturer : UNIT NO.A222 3F HANG FUNG INDUSTRIAL BUILDING PHASE 2 NO.2G HOK YUEN ST HUNGHOM KL HONG KONG Equipment Under Test (EUT) Product Name: FREEWELL SMARTPHONE GENIUS RIG Model No.: FWRMGEN Series model: N/A Trade Mark: FREEWELL FCC ID: 2BKCC-FWRMGEN Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: Aug. 07, 2024 Date of Test: Aug. 07, 2024 ~ Aug. 14, 2024 Date of report issued: Aug. 14, 2024 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: HTT202408136F01 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 2 of 28 1. Version Version No. Date Description 00 Aug. 14, 2024 Original Tested/ Prepared By Date: Aug. 14, 2024 Project Engineer Check By: Date: Aug. 14, 2024 Reviewer Approved By : Date: Aug. 14, 2024 Authorized Signature Report No.: HTT202408136F01 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 3 of 28 2. Contents Page 1. VERSION ........................................................................................................................................................ 2 2. CONTENTS .................................................................................................................................................... 3 3. TEST SUMMARY ........................................................................................................................................... 4 4. GENERAL INFORMATION ............................................................................................................................ 5 4.1. GENERAL DESCRIPTION OF EUT ................................................................................................................ 5 4.2. TEST MODE ............................................................................................................................................... 7 4.3. DESCRIPTION OF SUPPORT UNITS .............................................................................................................. 7 4.4. DEVIATION FROM STANDARDS .................................................................................................................... 7 4.5. ABNORMALITIES FROM STANDARD CONDITIONS ........................................................................................... 7 4.6. TEST FACILITY ........................................................................................................................................... 7 4.7. TEST LOCATION ......................................................................................................................................... 7 4.8. ADDITIONAL INSTRUCTIONS ........................................................................................................................ 7 5. TEST INSTRUMENTS LIST ........................................................................................................................... 8 6. TEST RESULTS AND MEASUREMENT DATA ........................................................................................... 9 6.1. CONDUCTED EMISSIONS ............................................................................................................................ 9 6.2. CONDUCTED OUTPUT POWER .................................................................................................................. 10 6.3. CHANNEL BANDWIDTH .............................................................................................................................. 11 6.4. POWER SPECTRAL DENSITY ..................................................................................................................... 13 6.5. BAND EDGES ........................................................................................................................................... 15 6.5.1 Conducted Emission Method .......................................................................................................... 15 6.5.2 Radiated Emission Method ............................................................................................................. 16 6.6. SPURIOUS EMISSION ................................................................................................................................ 18 6.6.1 Conducted Emission Method .......................................................................................................... 18 6.6.2 Radiated Emission Method ............................................................................................................. 20 6.7. ANTENNA REQUIREMENT .......................................................................................................................... 27 7. TEST SETUP PHOTO .................................................................................................................................. 28 8. EUT CONSTRUCTIONAL DETAILS ........................................................................................................... 28 Rep…

Text truncated - open the document above for the full version.

Shenzhen HTT Technology Co., Ltd. Report No.: HTT202408136 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 1 Product Name: FREEWELL SMARTPHONE GENIUS RIG Model No.: FWRMGEN Test Setup Photo Radiated Emission ------End------