2BKCK-HB733Wireless Display Adapter

东莞市沃通实业有限公司 World Pass Industrial Co.,LTD P/N：HB733 Name：Wireless Display Adapter 1.本产品适用于带HDMI接口输出的电视机、显示器、投影机，即插即用，无需外部Wifi和网络；采用内置5Gwifi高速无线视频传 输； This product is suitable for HDMI interface output TV, display, projector, plug and play, no external Wifi and network; High-speed wireless video transmission with built-in 5Gwifi; 2.这款小巧的无线HDMI显示适配器非常便携，非常适合户外商务演示。其强大的芯片组可确保与各种HDMI输出设备兼容，包括笔 记本电脑，PC,平板电脑,手机等。适用于会议室、家庭娱乐、多媒体教育等各种场合。 This compact Wireless HDMI Display Dongle Adapter is highly portable and perfect for outdoor business presentations. Its powerful chipset ensures compatibility with a wide range of HDMI output devices, including laptops, PCs, tablets,mobile phone and more. It is suitable for various settings such as conference rooms, home entertainment, and multimedia education. 3.最大无障碍无线传输距离：30M Maximum barrier-free wireless transmission distance: 30M 4.HDMI最大支持分辩率1080P HDMI supports a maximum resolution of 1080P 5.本产品在发射与接收端各有一个 Switch开关，发射端开关支持一键打开与关闭投屏模式 ， 接收端开关主要用于发射与接收配对使用 ； This product has a Switch switch at the transmitting and receiving ends. The switch at the transmitting end supports one-click opening and closing screen projection mode. The receiver switch is mainly used for transmitting and receiving. 6.本产品HDIM支持复制与扩展双模式 This product supports both replication and extension modes 7.本产品支持PD3.0快充，最高20V.5A.100W This product supports PD3.0 fast charge, up to 20V.5A.100W 支持MAC OS、Windows、Android 芯片组合Combo Chips: AM8360D+CS5266BN+AM9421BU*2+AM8268D CS5266BNPD+视频芯片 AM8360D发射端高度集成的混合信号SoC视频处理器芯片 AM8268D接收端发射端高度集成的混合信号 SoC视频处理器芯片 AM9421BUWiFi模组主芯片 接口规格Interface specification： HDMI最高分辨率 Maximum resolution 1080P 产品外观规格 外壳描述 Shell description 喷砂阳极氧化银色色+塑胶白色 Sandblasted anodized Sliver+Plastic White TX 尺寸 (TX Size) Ф60*H15.1mm(Plastic) + L20*W10.9*H6.0mm(Aluminum) RX 尺寸 (RX Size) L30.3*W18.5*H10mm(Aluminum) + L27.5*W18.5*H10mm(Plastic) 使用注意事项 1.使用前确认设备是否能达到相应要求 Before use, confirm whether the equipment can meet the corresponding requirements 2.使用时确认产品内PIN针无下陷或弯曲现象 Make sure that the PIN pin in the product does not sink or bend 3.使用时注意不要将液体溅入连接器内 Be careful not to splash liquid into the connector during use 4.产品需放置在干燥的地方，不要放置于潮湿的环境内 Products should be placed in a dry place, do not place in a humid environment 5.产品连接器接口热插拔间隔时间至少 5秒钟（适用于所用产品） Product connector interface hot swap interval at least 5 seconds (for the product used) 制表： 李秋山 审核：蒋昌锋 批准：蒋志云 PD+ video chip Highly integrated mixed-signal SoC video processor chip at the transmitter end Receiving end highly integrated mixed-signal SoC video processor chip WiFi module main chip FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Absorption Rate (SAR) information: This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a appropriate separation distance between the user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna.

Dongguan World Pass Industrial Co.,LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Dongguan World Pass Industrial Co.,LTD Address: No. 3, Chang' an Xingfa South Road,Chang' an Town,Dongguan City,Guangdong Province Product Name: Wireless Display Adapter FCC ID: 2BKCK-HB733 Model(s): HB733(SP001) 2.911(d)(5)(i) Equipment Type We, [Dongguan World Pass Industrial Co.,LTD] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Penghai Xing Date: 2024-09-09 Title and Company name: Manager NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Dongguan World Pass Industrial Co.,LTD 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Dongguan World Pass Industrial Co.,LTD Address: No. 3, Chang' an Xingfa South Road,Chang' an Town,Dongguan City,Guangdong Province Product Name: Wireless Display Adapter FCC ID: 2BKCK-HB733 Model(s): HB733(SP001) 2.911(d)(5)(ii) Applicant filing We, [Dongguan World Pass Industrial Co.,LTD] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Penghai Xing Date: 2024-09-09 Title and Company name: Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Dongguan World Pass Industrial Co.,LTD 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Dongguan World Pass Industrial Co.,LTD Address: No. 3, Chang' an Xingfa South Road,Chang' an Town,Dongguan City,Guangdong Province Product Name: Wireless Display Adapter FCC ID: 2BKCK-HB733 Model(s): HB733(SP001) 2.911(d)(7) USA Designated Agent for Service of Process We, [Dongguan World Pass Industrial Co.,LTD ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: Dongguan World Pass Industrial Co.,LTD Address: No. 3, Chang' an Xingfa South Road,Chang' an Town,Dongguan City,Guangdong Province FRN: 0035819754 FCC Grantee Code: 2BKCK Contact Name: Penghai Xing Telephone No: 18575698794 Email: [email protected] Signature: Title: Signature: Title: Manager S俨沪� Dongguan World Pass Industrial Co.,LTD 2.911 (d)(7)USA Agent v1.2 Date: 2024-09-09 Date: 2024-09-09 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to-the-communications-supply-chain-through-the

Dongguan World Pass Industrial Co.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-09-09 Subject; Request for Long Term Confidentiality FCC ID: 2BKCK-HB733 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Penghai Xing Title: Manager

Dongguan World Pass Industrial Co.,LTD FCC Software Configuration Control Declaration Date: September 9, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Wireless Display Adapter / HB733(SP001) Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Penghai Xing Date: 2024-09-09 Title: Manager Signature of applicant FCC Software Configuration Control Declaration Rev1.1(5G)

Letter of Authorization Company: Dongguan World Pass Industrial Co.,LTD Address: No. 3, Chang' an Xingfa South Road,Chang' an Town,Dongguan City,Guangdong Province Product Name: Wireless Display Adapter Model Number: HB733(SP001) FCC Identifier: 2BKCK-HB733 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Penghai Xing Date: 2024-09-09 Title: Manager

Model: HB733(SP001) External Model: HB733(SP001) Model: HB733(SP001)

Label&Location Wireless Display Adapter Model: HB733(SP001) FCC ID: 2BKCK-HB733

Model: HB733(SP001) Internal Model: HB733(SP001) WIFI ANT

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 35 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName: DongguanWorldPassIndustrialCo.,LTD Address: No.3,Chang'anXingfaSouthRoad,Chang'anTown, DongguanCity,GuangdongProvince EUTName: WirelessDisplayAdapter ModelNumber: HB733(SP001) IssuedBy CompanyName: BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber: BTF240726R00501 TestStandards: 47CFRPart2.1093IEC/IEEE62209-1528:2020 IEEEC95.1-2019KDB447498D01KDB865664D01 KDB865664D02KDB248227D01KDB447498D02 KDB690783D01 FCCID:2BKCK-HB733 TestConclusion: Pass TestDate: 2024-09-26 DateofIssue: 2024-09-27 TestedBy: JimYin/Tester PreparedBy: ZoeyZhang/ProjectEngineer Date: 2024-09-27 ApprovedBy: Ryan.CJ/EMCManager Date: 2024-09-27 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF240726R00501 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 35 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02024-09-27Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF240726R00501 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 35 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction...............................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..........................................................................................................4 1.3LaboratoryCondition.......................................................................................................................................................4 1.4Announcement................................................................................................................................................................4 2.ProductInformation..................................................................................................................................................................5 2.1ApplicationInformation....................................................................................................................................................5 2.2ManufacturerInformation................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).....................................................................................................5 2.5TechnicalInformation......................................................................................................................................................5 3.SummaryofTestResults.........................................................................................................................................................6 3.1TestStandards................................................................................................................................................................6 3.2DeviceCategoryandSARLimit......................................................................................................................................6 3.3TestResultSummary......................................................................................................................................................6 3.4TestUncertainty..............................................................................................................................................................7 4.MeasurementSystem...............................................................................................................................................................9 4.1SpecificAbsorptionRate(SAR)Definition......................................................................................................................9 4.2MVGSARSystem...........................................................................................................................................................9 5.SystemVerification.................................................................................................................................................................14 5.1PurposeofSystemCheck.............................................................................................................................................14 5.2SystemCheckSetup.....................................................................................................................................................14 6.TESTPOSITIONCONFIGURATIONS.................................................................................................................…

Text truncated - open the document above for the full version.

中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中检（深圳）计量测试服务有限公司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 证 书 CALIBRATION CERTIFICATE 证 书 编 号 : Certificate No. S423066282 第 1 页 共 6 页 Page of 客 户 信 息 Customer Information 客户名称: Name 信恒检测技术（深圳）有限公司 客户地址: Address 深圳市宝安区松岗街道潭头社区潭头工业城二区1栋厂房101.201.3 01 被 校 测 量 器 具 信 息 Information of Instrument under Calibration 仪器名称: Description 同轴机械校准件 型号规格: Model/Type 50Ω 35mm 9G 制造厂商: Manufacturer 南京普纳科技设备有限公司 出厂编号: Serial No. / 管理编号: Asset No. BTF-EM-068 接收日期: Received Date 2023/11/16 接收状态: As Received 正常 结 论: Conclusion 参照检测/校准结果使用。 The test or calibration results are referred to evaluate the validity of instrum ent measurement. 扫一扫查真伪 证书有效性声明： 1、证书首页盖有证书章 2、证书须有唯一防伪码 3、扫描信息与证书一致 校准日期: 2023 / 11 / 16 校准: Cal.DateCalibrated by 签发日期: 2023 / 11 / 17 核验: Issue DateInspected by 建议复校日期: 2024 / 11 / 15 签发: Next Cal. DateApproved by ( 总经理助理 ) 地址：深圳市光明区玉塘街道田寮社区同仁路盛荟红星创智广场网址(Web)：http://www.ccic-mts.com Addr：ShengHui Hongxing Chuangzhi Square, Tongren Road, Tianliao电话(Tel)：0755-86139118 Community, Yutang Street, Guangming District, Shenzhen传真(Fax)：0755-86139110 邮政编码(Post No.)：518107邮箱(e-mail): [email protected] 证书专用章 Issued by 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中检（深圳）计量测试服务有限公司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 说 明 CALIBRATION DIRECTIONS 证 书 编 号 : Certificate No. S423066282 第 2 页 共 6 页 Page of 1. 本公司实验室经中国合格评定国家认可委员会审核，符合ISO/IEC17025《检测和校准实验室能力的通用要求》的要求，认可 证书号：No.L3103。 This laboratory is accredited to ISO/IEC 17025《Requirements for the competence of Testing and Calibration Laboratories》,CNAS Accreditation Certificate No.L3103. 2．对本次校准若有异议，委托方应于收到被校件之日起十五日内向本公司提出。 If there is any objection concerning the calibration, the Client should inform the issuing company within 15 days from the date of the device under test return to the client. 3. 未经本公司许可，不得部分复印、摘用或篡改本证书的内容。 This report may not be reproduced, except in full, without the written approval of CCIC (ShenZhen) Metrology & Testing Service Co.,Ltd. 4. 本证书校准结果只与被校准仪器有关，带'*'号的校准项目或参数不在本公司实验室认可范围内。 The results reported here in apply only to the calibrated equipment，Calibration items or parameter with '* ' is beyond the scope of our laboratory acc reditation. 5. 本次校准的技术依据: Procedures for the Calibration: 参照JJG(电子)306001-2006《射频同轴阻抗标准器检定规程》 V.R. of RF Coaxial Impedance standard 参照 JZM 35118J-2017《微波元器件校准方法》 Microwave components calibration method 6. 本次校准所使用的主要标准器具： Standards Used in the Calibration: 器具名称 Instrument Description 编 号 Asset No. 证书编号 Certificate No. 有效期 Due Date 计量特性 Metrological Characteristic 溯源机构 Traceability institutions 网络分析仪/Vector Network Analyzer CCIC-WX-1024JL23155571512024/03/13 Sij模值:U=0.12dB;Sij相 位:U=0.9°;VSWR:U=0.0 30;(k=2) 深圳计量院 N型校准套件/Type- N Calibration Kit CCIC-WX-1006 GFJGJL1002220078 220 2025/04/28 Reflection:U=0.02(k= 2);Phase:U=1°(k=2); 二○三所 7.校准地点和环境条件： Place and environmental conditions: 地 点：客户现场 实验室温 度： ( 23.5 ～ 24.5 )°C 相对湿度： ( 58 ～ 68 )% Place of Calibration TemperatureRelative Humidity 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中检（深圳）计量测试服务有限公司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 3 页 共 6 页 Page of 1、外观及正常性检查： Check on Appearance and Function： 2、50Ω负载驻波比 50Ω load VSWR ± ± ± ± ± ± ± ± ± ± ± ± ± ± 3、开路反射 Open circuit reflex ± ± ± ± 频率实测值允许误差 正常 Pass 结论 Conclusion （MHz）/（Ω）（P/F） FrequencyMeasuredMPE P 501.0030.00P 101.0040.00 P 2001.0050.00P 1001.0050.00 P 10001.0090.00P 5001.0060.00 P 30001.0170.00P 20001.0120.00 P 50001.0230.00P 40001.0210.00 P 70001.0180.00P 60001.0210.00 P 90001.0170.00P 80001.0150.00 结论 FrequencyMeasuredMPEConclusion 频率实测值允许误差 （P/F） 101.0000.00P （MHz）/（Ω） P 1001.0000.00P 501.0000.00 P2001.0000.00 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中检（深圳）计量测试服务有限公司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 4 页 共 6 页 Page of ± ± ± ± ± ± ± ± ± ± 4、开路相位 Open phase ± ± ± ± ± ± ± ± ± ± ± ± ± ± 5、短路反射 5001.0000.00P P 20000.9990.00P 10001.0000.00 P 40000.9960.00P 30000.9980.00 P 60000.9920.00P 50000.9940.00 P 80000.9880.00P 70000.9890.00 P 频率实测值允许误差结论 90000.9870.00 10-0.231.0P 50-1.111.0F FrequencyMeasuredMPEConclusion （MHz）（°）（°）（P/F） 500-11.101.0F 1000-22.271.0F 100-2.221.0F 200-4.431.0F 4000-89.401.0F 5000-111.921.0F 2000-44.381.0F 3000-66.991.0F 8000179.051.0F 9000155.911.0F 6000-134.791.0F 7000-157.971.0F 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中检（深圳）计量测试服务有限公司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 5 页 共 6 页 Page of Short circuit reflex ± ± ± ± ± ± ± ± ± ± ± ± ± ± 6、短路相位 Short phase ± ± ± ± ± ± ± 结论 FrequencyMeasuredMPEConclusion 频率实测值允许误差 （P/F） 100.9990.00P （MHz）/（Ω） P 1000.9970.00P 500.9990.00 P 5000.9950.00P 2000.9970.00 P 20000.9880.00P 10000.9900.00 P 40000.9880.00P 30000.9870.00 P 60000.9890.00P 50000.9870.00 P 80000.9910.00P 70000.9910.00 P 频率实测值允许误差结论 90000.9920.00 10179.721.0F 50178.711.0F FrequencyMeasuredMPEConclusion （MHz）（°）（°）（P/F） 500167.821.0F 1000155.881.0F 100177.461.0F 200175.001.0F 2000132.231.0F 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中检（深圳）计量测试服务有限公司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 6 页 共 6 页 Page of ± ± ± ± ± ± ± 说明(Notes) 1、本次校准的测量不确定度 Measurement Uncertainty in Calibration 1.1 依据JJF 1059.1-2012 测量不确定度评定与表示 Conform JJF 1059.1-2012 Evaluation and Expression of Uncertainty in Measurement. 1.2 本次测量结果的扩展不确定度（k=2） The Expanded Uncertainty of the Measurement Results 400089.781.0F 500062.691.0F 3000108.781.0F 8000-4.031.0F 9000-26.071.0F 600040.521.0F 700018.021.0F 以下空白 End of Report ——反射系数相位(Reflective Phas…

Text truncated - open the document above for the full version.

产品规格书 PRODUCT SPECIFICATION Customer: Shenzhen Xianzhi IOT Technology Co., Ltd. Customer’s part number: ANT000087 Product description: 5G Frequency Antenna Manufacturer： Shenzhen RedbirdTek Technology Co., Ltd. 1、产品技术指标（PRODUCT TECHNICAL SPECIFICATION） 电性能指标Electrical Specifications 频率范围Frequency Range (MHz) 5150-5850 频带宽度Bandwidth (MHz) 5G：700 输入阻抗Input Impendence (Ω) 50 电压驻波比V.S.W.R ≤2.0 增益Gain (dBi) 2.0dBi 极化形式Polarization Type 垂直Vertical 机械指标Mechanical Specifications 天线长度Antenna Length (mm) 7.1*3.4*0.5mm 辐射体Radiator Copper 连接器型号Connect Type NC 外壳颜色Radome Color Silver 重量Weight (g) 0.02 产品简介Product introduction: 该天线是专为无线内置天线设备设计生产的，天线具有外形美观，结 构小巧，一致性高，成本低廉。 The antenna is specially designed and produced for wireless built-in antenna equipment. The antenna has beautiful appearance, small structure, high consistency and low cost. 2、产品图片（PRODUCT PICTURE） 3、产品规格图(PRODUCT SPECIFICATION CHART) 4、驻波图（STATIONARY WAVE PATTERN） 5.增益效率值Gain and Efficiency： 6.场型图Field Pattern： 5.25G 5.8G

Totalor partialreproductionof this documentwithoutpermissionof the Laboratoryis not allowed. Page 1 of 70 BTF TestingLab (Shenzhen)Co., Ltd. F101,201 and 301, Building1, Block2, TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RF Te st Report For ApplicantName :DongguanWorldPassIndustrialCo.,LTD Address: No. 3, Chang'an XingfaSouthRoad,Chang'an Town,Dongguan City ,GuangdongProvince EUT Name:WirelessDisplayAdapter Brand Name:N/A ModelNumber: HB733（SP001） SeriesModelNumber:N/A IssuedBy CompanyName :BTF TestingLab (Shenzhen)Co., Ltd. Address: F101,201 and 301, Building1, Block2, TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF240726R00401 Test Standards:47 CFRPart 15E Test Conclusion:Pass FCC ID:2BKCK-HB733 Test Date :202 4-07-27 to 2024-08-09 Date of Issue:2024-08-12 TestedBy: Ssxx.guo/Tester PreparedBy: Ace Xie / ProjectEngineer Date:2024-08-12 ApprovedBy: Ryan.CJ/ EMCMana ger Date:2024-08-12 Note: All the test resultsin this reportonly relatedto the testingsamples.Whichcan be duplicatedcompletelyfor the legal use with approvalof applicant;it shall not be reproducedexceptin full withoutthe writtenapprovalof BTF TestingLab (Shenzhen)Co., Ltd., All the objectionsshould be raisedwithin thirty days from the date of issue.To validatethe report,you can contactus. Test ReportNumber:BTF240726R00401 Totalor partialreproductionof this documentwithoutpermissionof the Laboratoryis not allowed. Page 2 of 70 BTF TestingLab (Shenzhen)Co., Ltd. F101,201 and 301, Building1, Block2, TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02024-08-12Original Note: Once the revisionhas been made,then previousversionsreportsare invalid. Test ReportNumber:BTF240726R00401 Totalor partialreproductionof this documentwithoutpermissionof the Laboratoryis not allowed. Page 3 of 70 BTF TestingLab (Shenzhen)Co., Ltd. F101,201 and 301, Building1, Block2, TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China Table of Contents 1 INTRODUCTION.................................................................................................................................................5 1.1 Identificationof TestingLaboratory...................................................................................................5 1.2 Identificationof the ResponsibleTestingLocation..........................................................................5 1.3 Announcement......................................................................................................................................5 2 PRODUCTINFORMATION.................................................................................................................................6 2.1 ApplicationInformation.......................................................................................................................6 2.2 ManufacturerInformation..................................................................................…

Text truncated - open the document above for the full version.