2BKCLET538Two Way Radio

Tx:420-450Mhz Rx: 400-520Mhz FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference including received interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. Do not use this device when the antenna shows obvious damages. Hold this transmitter approximately 25 mm away from your face and speak normal with the antenna pointed up and away. Use the supplied belt clip for body-worn configuration as other accessories may not comply to the limits. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.

Guangzhou ETMY Technology Co., Ltd. 13th Floor Dong Cheng Building NO.421 Yan Jiang East Road Yuexiu District, GuangZhou 51000 China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 15, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BKCLET538 FRN: 0035819648 Guangzhou ETMY Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) Name: Ruihuan Li Title: Manager

Guangzhou ETMY Technology Co., Ltd. 13th Floor Dong Cheng Building NO.421 Yan Jiang East Road Yuexiu District, GuangZhou 51000 China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 15, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BKCLET538 FRN: 0035819648 Guangzhou ETMY Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) Name: Ruihuan Li Title: Manager

Guangzhou ETMY Technology Co., Ltd. 13th Floor Dong Cheng Building NO.421 Yan Jiang East Road Yuexiu District, GuangZhou 51000 China Date: Nov.20, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BKCLET538 US Agent – Attestation Statement / Part 2.911(d)(7) [Guangzhou ETMY Technology Co., Ltd.] certifies, that as of [Nov.20, 2024], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BKCLET538. [Guangzhou ETMY Technology Co., Ltd.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Guangzhou ETMY Technology Co., Ltd.] for FCC ID: 2BKCLET538. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [Guangzhou ETMY Technology Co., Ltd.] Designated Agent: FCC US Agent, LLC Company Representative: [Ruihuan Li] Tel: +86-18028067975 Email: [email protected] FRN: 0035819648 Designated Agent Representative: Tim Payne Signature: Signature:

Guangzhou ETMY Technology Co., Ltd. 13th Floor Dong Cheng Building NO.421 Yan Jiang East Road Yuexiu District, GuangZhou 51000 China Nov. 15, 2024 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2BKCLET538 Model Number: ET-538, ET-538M2, ET-538M3, ET-638, ET-638M2, ET- 638M3, ET-638M4 To Whom It May Concern: We, The Guangzhou ETMY Technology Co., Ltd.hereby declare that the models are identical except the cover line design and model name. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Ruihuan Li

Guangzhou ETMY Technology Co., Ltd. 13th Floor Dong Cheng Building NO.421 Yan Jiang East Road Yuexiu District, GuangZhou 51000 China Agent Authorization Company: Guangzhou ETMY Technology Co., Ltd. Address: 13th Floor Dong Cheng Building NO.421 Yan Jiang East Road Yuexiu District, GuangZhou 51000 China Product Name: Two Way Radio Model Number(s): ET-538, ET-538M2, ET-538M3, ET-538M4, ET-638, ET-638M2, ET-638M4 Product Description: Two Way Radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Oct. 29, 2024 Name: Ruihuan Li Title: Manager Company: Guangzhou ETMY Technology Co., Ltd.

Guangzhou ETMY Technology Co., Ltd. 13th Floor Dong Cheng Building NO.421 Yan Jiang East Road Yuexiu District, GuangZhou 51000 China Date: 2024-11-15 Declaration Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §15.121 FCC ID: 2BKCLET538 Dear Sir/Madam, We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable. This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. Sincerely Yours, Name: Ruihuan Li Title: Manager

Guangzhou ETMY Technology Co., Ltd. 13th Floor Dong Cheng Building NO.421 Yan Jiang East Road Yuexiu District, GuangZhou 51000 China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 15, 2024 Subject; Request for Confidentiality FCC ID: 2BKCLET538 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Ruihuan Li Title: Manager

Report No.: AGC16557241001AP02 Page 1 of 5 EXTERNAL PHOTOS WHOLE VIEW OF EUT All VIEW OF EUT Antenna Report No.: AGC16557241001AP02 Page 2 of 5 Charging base VIEW OF EUT TOP VIEW OF EUT Report No.: AGC16557241001AP02 Page 3 of 5 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC16557241001AP02 Page 4 of 5 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC16557241001AP02 Page 5 of 5 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm*40mm FCC ID: 2BKCLET538 WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.

Report No.: AGC16557241001AP02 Page 1 of 7 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC16557241001AP02 Page 2 of 7 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC16557241001AP02 Page 3 of 7 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC16557241001AP02 Page 4 of 7 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC16557241001AP02 Page 5 of 7 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC16557241001AP02 Page 6 of 7 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) Report No.: AGC16557241001AP02 Page 7 of 7 INTERNAL VIEW OF EUT (FIGURE 10) INTERNAL VIEW OF EUT (FIGURE 11) ****************************************End of Report*************************************

Page 1 of 26 FCC Test Report Report No.: AGC16557241001FR01 FCC ID 2BKCLET538 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Two Way Radio BRAND NAME : ETMY MODEL NAME : ET-538, ET-538M2, ET-538M3, ET-638, ET-638M2, ET-638M3, ET-638M4 APPLICANT : Guangzhou ETMY Technology Co., Ltd. DATE OF ISSUE : Oct. 29, 2024 STANDARD(S) : FCC Part 15 Subpart B REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC16557241001FR01 Page 2 of 26 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 29, 2024 Valid Initial Release Report No.: AGC16557241001FR01 Page 3 of 26 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 2.2 Auxiliary Surrounding Description ............................................................................................................. 5 2.2 Test Methodology ...................................................................................................................................... 6 2.3 Description of Test Modes ......................................................................................................................... 6 3. Test Environment ............................................................................................................................................ 7 3.1 Address of The Test Laboratory ................................................................................................................ 7 3.2 Test Facility ................................................................................................................................................ 7 3.3 Environmental Conditions ......................................................................................................................... 8 3.4 Measurement Uncertainty ......................................................................................................................... 8 3.5 List of Equipment Used ............................................................................................................................. 9 4. Summary of Test Results ............................................................................................................................. 10 5. Radiated Emission Measurements .............................................................................................................. 11 5.1 Provisions Applicable .............................................................................................................................. 11 5.2 Measurement Setup ................................................................................................................................ 11 5.3 Measurement Procedure ......................................................................................................................... 12 5.4 Measurement Resul ................................................................................................................................ 13 6. Conducted Emission Measurements .......................................................................................................... 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Setup ................................................................................................................................ 17 6.3 Measurement Procedure ......................................................................................................................... 18 6.4 Measurement Result ............................................................................................................................... 19 7. Antenna Conducted Power for Receivers .................................................................................................. 21 7.1 Provisions Applicable .............................................................................................................................. 21 7.2 Measurement Setup ................................................................................................................................ 21 7.3 Measurement Procedure ......................................................................................................................... 21 7.4 Measurement Result ............................................................................................................................... 22 8. Scanning Receivers and Frequency Converters Used with Scanning Receivers ................................. 24 8.1 Provisions Applicable .............................................................................................................................. 24 8.2 Measurement Setup ................................................................................................................................ 24 8.3 Measurement Procedure ......................................................................................................................... 24 8.4 Measurement Result ............................................................................................................................... 25 Appendix I: Photographs of Test Setup .......................................................................................................... 26 Appendix II: Photographs of Test EUT .........................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC16557241001AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC16557241001AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP ****************************************End of Report*************************************