2BKDW-BG-A4021Speaker

GUANGZHOU WEI GUAN TRADE CO., LTD. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 08, 2024 FCC ID:2BKDW-BG-A4021 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing GUANGZHOU WEI GUAN TRADE CO., LTD. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing GUANGZHOU WEI GUAN TRADE CO., LTD. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: GUANGZHOU WEI GUAN TRADE CO., LTD. Address: ROOM 503, DONG JIAO BEI ROAD NO. 436, LI WAN District, Guangzhou, Guangdong, China Contact Person: ShaoZhen Guan Tel.: +86-18198855254 Email: [email protected] Sincerely, Signature:

GUANGZHOU WEI GUAN TRADE CO., LTD. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: October 08, 2024 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID:2BKDW-BG-A4021 GUANGZHOU WEI GUAN TRADE CO., LTD.(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant GUANGZHOU WEI GUAN TRADE CO., LTD. FRN: 0035824010 Address: ROOM 503, DONG JIAO BEI ROAD NO. 436, LI WAN District, Guangzhou, Guangdong, China Signature: Contact Person: ShaoZhen Guan Tel: +86-18198855254 Email: [email protected]

GUANGZHOU WEI GUAN TRADE CO., LTD. Date: October 08, 2024 Product Model Number: BG-A4021, RS-A403T, IV-B12A, IV-B15A, IV- B18A, AT+106SUB, AT+108SUB, AT+110SUB, AT+112SUB, AT+115SUB, AT+118SUB, MX-08A, MX-10A, @4, @5, CR4, U8A, U10A, U12A, U15A FCC ID:2BKDW-BG-A4021 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: ShaoZhen Guan Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86-18198855254 On behalf of: GUANGZHOU WEI GUAN TRADE CO., LTD.

GUANGZHOU WEI GUAN TRADE CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 8, 2024 Subject; Request for Confidentiality FCC ID:2BKDW-BG-A4021 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: ShaoZhen Guan Title: Manager

GUANGZHOU WEI GUAN TRADE CO., LTD. Model Difference Statement Dear Sir/Madam, Added models RS-A403T, IV-B12A, IV-B15A, IV-B18A, AT+106SUB, AT+108SUB, AT+110SUB, AT+112SUB, AT+115SUB, AT+118SUB, MX-08A, MX-10A, @4, @5, CR4, U8A, U10A, U12A, U15A basis of the original product BG-A4021 The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: ShaoZhen Guan Company name: GUANGZHOU WEI GUAN TRADE CO., LTD. Address: ROOM 503, DONG JIAO BEI ROAD NO. 436, LI WAN District, Guangzhou, Guangdong, China

Page 1 of 3 1. General Information 1.1 Product Information Manufacturer: GO-JOYTY AUDIO(GZ) CO.,LIMITED Address of Manufacturer: Floor 303, 1st Building, No.10 Xilong Street,South Qianfeng Road, Shiji Town, Panyu District, Guangzhou City ,Guangdong Province, China Product Name: PCB Antenna Model Name: BG-A4021 Frequency Range: 2400MHz - 2483.5MHz Type of Antenna: PCB Antenna Antenna Gain: 0dBi (Max.) Impedance: 50 ohm Antenna View: Length * Width (1.4cm * 0.5cm) Page 2 of 3 2. OTA Test 2.1 Gain Frequency Peak Gain (dBi) Polarity 2402MHz 0 Horizontal 2402MHz -0.3 Vertical 2442MHz -1.53 Horizontal 2442MHz -2.26 Vertical 2480MHz -2.12 Horizontal 2480MHz -2.27 Vertical Page 3 of 3 2.2 Radiation Pattern View

Report No: SSP24070276-1&2E FCC ID:2BKDW-BG-A4021 Annex of Test Report Annex A. EUT External Photos EUT View 1 EUT View 2 Report No: SSP24070276-1&2E FCC ID:2BKDW-BG-A4021 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP24070276-1&2E FCC ID:2BKDW-BG-A4021 Annex of Test Report EUT View 5 EUT View 6

Report No: SSP24070276-1&2E FCC ID:2BKDW-BG-A4021 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

FCC ID:2BKDW-BG-A4021 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f2) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f2) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2, Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation BLE Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result GFSK -0.82 0.83 0.0002 1.0 PASS BR+EDR Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 8DPSK 1.13 1.30 0.0003 1.0 PASS So a SAR test is not required

CCUT Testing & Certification Report No: SSP24070276-1E FCC Test Report Page 1 of 52 FCC TEST REPORT FCC ID:2BKDW-BG-A4021 Report No. : SSP24070276-1E Applicant : GUANGZHOU WEI GUAN TRADE CO., LTD. Product Name : Speaker Model Name : BG-A4021 Test Standard : FCC Part 15.247 Date of Issue : 2024-08-15 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. CCUT Testing & Certification Report No: SSP24070276-1E FCC Test Report Page 2 of 52 Test Report Basic Information Applicant..................................: GUANGZHOU WEI GUAN TRADE CO., LTD. Address of Applicant...............: ROOM 503, DONG JIAO BEI ROAD NO. 436, LI WAN District, Guangzhou, Guangdong, China Manufacturer..........................: GO-JOYTY AUDIO(GZ) CO.,LIMITED Address of Manufacturer........: Floor 303, 1st Building, No.10 Xilong Street,South Qianfeng Road, Shiji Town, Panyu District, Guangzhou City ,Guangdong Province, China Product Name.........................: Speaker Brand Name.............................: iVTWO Main Model..............................: BG-A4021 Series Models..........................: RS-A403T, IV-B12A, IV-B15A, IV-B18A, AT+106SUB, AT+108SUB, AT+110SUB, AT+112SUB, AT+115SUB, AT+118SUB, MX-08A, MX-10A, @4, @5, CR4, U8A, U10A, U12A, U15A Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2013 Date of Test .............................: 2024-08-07 to 2024-08-15 Test Result...............................: PASS Tested By ................................: (Coke Huang) Reviewed By............................: (Lieber Ouyang) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. CCUT Testing & Certification Report No: SSP24070276-1E FCC Test Report Page 3 of 52 CONTENTS 1. General Information ...................................................................................................................................................... 5 1.1 Product Information ............................................................................................................................................... 5 1.2 Test Setup Information ........................................................................................................................................... 6 1.3 Compliance Standards ............................................................................................................................................. 7 1.4 Test Facilities .......................................................................................................................................................... 7 1.5 List of Measurement Instruments ............................................................................................................................ 8 1.6 Measurement Uncertainty ....................................................................................................................................... 9 2. Summary of Test Results ............................................................................................................................................. 10 3. Antenna Requirement ................................................................................................................................................. 11 3.1 Standard and Limit................................................................................................................................................ 11 3.2 Test Result ............................................................................................................................................................ 11 4. Conducted Emissions................................................................................................................................................... 12 4.1 Standard and Limit................................................................................................................................................ 12 4.2 Test Procedure ...................................................................................................................................................... 12 4.3 Test Data and Results ............................................................................................................................................ 13 5. Radiated Emissions ..................................................................................................................................................... 16 5.1 Standard and Limit................................................................................................................................................ 16 5.2 Test Procedure ...................................................................................................................................................... 16 5.3 Test Data and Results ............................................................................................................................................ 18 6. Band-edge Emissions(Radiated)................................................................................................................................. 22 6.1 Standard and Limit................................................................................................................................................ 22 6.2 Test Procedure ................................................................…

Text truncated - open the document above for the full version.