2BKIT-SCA60VPet feeder

Accesspointdistributionnetwork(optional) Please first switchthe distributionnetworkmode to the access point distributionnetwork as accordingto the key instructions.The LED light flashesslowly.The followingsteps are as follows: 1. Open the Tuya Smart APP, choose"Add Device"- ManuallyAdd - Small Appliances- Pet Feeder(Wi-Fi)- Enter WiFi Password- Click "Next",select Slow Flash - Click "Connect"- then find the WiFi signal for SmartLife-XXXX. 2. After connecting,return to the previousinterface,and the next step is to enter the distributionnetworkinterfaceand wait for connection. Video version Please read this user guide before using this productand keep it for reference. This productis for householduse User Guide Pet Feeder only. Safetyinstructions 1.Childrenshallusethisproductunderthesupervisionofparents. 2.Donotusethefeederforpetswhocannotreachthefoodtrayorhavephysical disabilities. 3.Donotimmersepartofthebaseinwater,whichmaydamageelectronic componentssuchasthecontrolpanel. 4.Donotplaceanyforeignobjectsinthepetfeeder. 5.Donotplacecannedorwetfoodinthefeeder. 6.Donotdisassemblethedeviceyourself. 7.Donotmodifythepetfeeder. 8.Ifthisdevicemalfunctionsorhasdamagedparts,donotattempttorepairthepet feederyourself.Contactthedealerandresolveit. 9.Unplugthepowerplugwhennotusingtheproductorbeforecleaningit. 10.Ifthepowerplugofthisdeviceisdamp,pleaseturnoffthepowersupplyofthe socket.Donottrytounplugthepowerplug. Cautions 1.Donotallowpetstocheworswallowanyaccessories. 2.Donotplacepetfeedersinexposedareas.Theambienttemperaturetobestored shouldbewithintherangeof-10~55°C. 3.PleasesupplypowerusingalkalineNo.1batteries.Donotuserechargeable batteries. 4.Checkthebatteryregularly.Ifyouaretravelingforalongtimeoronbusiness,be suretoreplacethebattery. 5.Donotliftthepetfeederdirectlywiththelid,thefoodbucketorthefoodtray.Lift thebasewithbothhandswhilekeepingthedeviceinanuprightposition. 6.Itissuitableonlyfordryfoodwithdimensionsrangingfrom2to20mmin diameter.Largerfoodsmaycausefoodjamsorblockagesinthemouth. 7.Pleasereadandfollowalltheimportantinstructionslistedonthepetfeederand package. 0102 0304 Key descriptions Press and hold for 6 seconds to reset and reinitialize the distribution network. A voice prompt will be given: "Beep" Press and hold for 6 seconds to switch to the slow blinking or fast bl inking mode. Reset key Recording Press and hold for 3 seconds to start recording. When you hear a beep, the red light will light up to start recording (up to 10 seconds). Release and end the recording. The red light will turn off, and the recording will automatically play once. key Manual feeding key: Short press 1 to feed 1 serving. Long press for 6 seconds to hear a "beep" as the machine is locked, and long press Manual feeding key: for 6 seconds to hear a "beep, beep" as the machine is unlocked. Indicator (white) 1. Flickering: Waiting for the distribution network 2. On: Network connection successful Indicator (red) 1. On: When powered by dry batteries/recording Cleaning and maintenance For your pet's health, it is recommended to clean the feeder regularly. When it getd dirty and the food tank has a lot of loose food, you can remove the food cover for cleaning. Clean the feeder base containing the control panel with a soft wet cloth. Do not wet this part, and remember not to wash it directly with running water. Packing List After opening the product packaging, please confirm whether the pet feeder is in good condition, and check whether the accessories are complete. Feeder *1 Power adapter*1 Power cord * 1 User Guide *1 0506 Instructions for Use 1. Assemble the feeder Remove the feeder from the box and package. Place the feeder within 10 meters away from the router. Combine the food tray with the fuselage base. Place the desiccant in the desiccant box above the bucket lid. 2. Supply the power Insert the 5V/1A power adapter into the wall socket and connect the device. Open the battery compartment at the bottom of the device and install 3 alkaline No.1 batteries (not mandatory) to prevent power outage. The red and blue indicator lights are on, indicating that the feeder is powered on. Notes: 1) No battery included. 2) Make sure all components are clean and completely dry before powering on. 3. Pour in dry pet food Pour the appropriate amount of dried pet food into the food bucket and close the lid. Notes: 1) Do not use canned or damp pet food. 2) The recommended pet food size range is 2-20 millimeters. 4. Record feeding Press and hold for 3 seconds to start recording. When you hear a beep, the red light will light up to start recording (up to 10 seconds). Release and end the recording. The red light will turn off, and the recording will automatically play once. Repeat this process each time to change your recording. Notes: 1) It will only play when recording is pressed. 2) When it's time to feed, deliver the food and play the recording. 0708 5. Press the button to lock/unlock Long press for 6 seconds to hear a "beep" as the machine is locked, and long press for 6 seconds to hear a "beep, beep" as the machine is unlocked. Notes: The feeding button does not work in the locked state and must be unlocked for normal use.APP operation is not affected in the locked state. 6. Manual feeding Manual feeding key: Short press 1 to feed 1 serving. Notes: The feeding schedule will not be affected. 7. Reset Distribution network mode switching: When powered on without network configuration, the white indicator defaults to fast flashing (WiFi fast network configuration mode). Press and hold for 6 seconds to make two beeps, and the red/white indicator remains on for 6 seconds to switch to slow flashing (access point network configuration mode). Press and hold repeatedly to switch between the two distribution modes. Simple troubleshooting ProblemsSolutions Cannot be configured  WiFi access point names and passwords should not be in Chinese. Please use access point in the 2.4G WiFi frequency band, wh…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: UGK-LVM UNITED INC FRN: 0033476375 Contact Name: Jimmychen Address: 6547NAcademyBlvd#2266,ColoradoSprings,CO80918 Telephone No: 001-323-51 04660 Email: [email protected] Applicant: Company name: Shenzhen Sanchong Technology Co., Ltd Grantee code: 2BKIT FCC ID: 2BKIT-SCA60V FRN: 0035852557 Contact Name: Jack bu Address: 206, 2nd Floor, No. 25-3 Wulian Road, Longxi Community, Longgang Street, Longgang District, Shenzhen Telephone: 18906679427 Fax: 18906679427 Email: [email protected] [Shenzhen Sanchong Technology Co., Ltd] certifies that, as of the date of this filing of the application with the TCB, [UGK-LVM UNITED INC] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Sanchong Technology Co., Ltd] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [UGK-LVM UNITED INC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2024/08/13 Applicant’s Name: Jack bu US Agent for Service of Process’s Name: Jimmychen Title: Manager Title: Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Sanchong Technology Co., Ltd Grantee code: 2BKIT FCC ID: 2BKIT-SCA60V FRN: 0035852557 Contact Name: Jack bu Address: 206, 2nd Floor, No. 25-3 Wulian Road, Longxi Community, Longgang Street, Longgang District, Shenzhen Telephone: 18906679427 Fax: 18906679427 Email: [email protected] i. [Shenzhen Sanchong Technology Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Sanchong Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Sanchong Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2024/08/13 Applicant’s Name: Jack bu Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Sanchong Technology Co., Ltd Product Similarity Declaration Company: Shenzhen Sanchong Technology Co., Ltd Address: 206, 2nd Floor, No. 25-3 Wulian Road, Longxi Community, Longgang Street, Longgang District, Shenzhen Product Name: Pet feeder Model Number: SC-A60V SC-A90K, SC-A90W, SC-A90V, SC-A60K, SC-A60W, SC-A80K, SC-A80W, SC-A80V FCC Identifier: 2BKIT-SCA60V Applicant’s FRN: 0035852557 We (Shenzhen Sanchong Technology Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and appearance color. Client’s signature Name: Jack bu Date: 2024-08-13 Title: Manager Signature of applicant:

Shenzhen Sanchong Technology Co., Ltd 1/1 Letter of Authorization Company: Shenzhen Sanchong Technology Co., Ltd Address: 206, 2nd Floor, No. 25-3 Wulian Road, Longxi Community, Longgang Street, Longgang District, Shenzhen Model Number: SC-A60V SC-A90K, SC-A90W, SC-A90V, SC-A60K, SC-A60W, SC-A80K, SC-A80W, SC-A80V FCC Identifier: 2BKIT-SCA60V Applicant’s FRN: 0035852557 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jack bu Date: 2024-08-12 Title: Manager Signature of applicant:

Shenzhen Sanchong Technology Co., Ltd 1/1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-08-13 Subject: Request for Confidentiality FCC ID: 2BKIT-SCA60V Applicant’s FRN: 0035852557 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual No ☐ Internal Photos No ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Jack bu Date: 2024-08-13 Title: Manager Signature of applicant:

Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(External Photos) Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※

Size: 22*23mm M/N: SCA60V FCC ID: 2BKIT-SCA60V Label location

Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(Internal Photos) Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ANT Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※

FCC ID: 2BKIT-SCA60V RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in KDB 447498 D01 V06 and 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Result of RF Exposure Evaluation wifi 2.4G mode Channel Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 16.812 47.9954 0.01905 1.0 PASS 802.11g 13.595 22.8823 0.00908 1.0 PASS 802.11n HT20 14.571 28.6484 0.01137 1.0 PASS 802.11n HT40 13.949 24.8256 0.00985 1.0 PASS Remark: antenna gain=3dBi wifi 5G mode: Band Channel Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result Band 1 802.11a 9.833 9.6228 0.00382 1.0 PASS 802.11n HT20 9.925 9.8288 0.00390 1.0 PASS 802.11n HT40 9.336 8.5822 0.00341 1.0 PASS 802.11ac HT20 9.80 9.5499 0.00379 1.0 PASS 802.11ac HT40 9.455 8.8206 0.00350 1.0 PASS 802.11ac HT80 8.62 7.2778 0.00289 1.0 PASS Remark: antenna gain=3dBi For Simultaneous transmitting, 1): The sum of the ratios of the spatially averaged results to the applicable frequency dependent MPE limits =0.01905/1 +0.00390/1 = 0.02295< 1 Since the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in the device is ≤ 1.0, the EUT is considered to satisfy MPE compliance for simultaneous transmission operations.

Shenzhen Feixin Wireless Communication Co., Ltd. 深圳公司：深圳市龙华区观湖街道长京机器人产业园A 栋305 室 上海公司：上海市松江区鼎源路618 号16 栋202 电话：+86-021-52060235 传真：+86-021-34711533 产品规格书 Product Specification 客户名称Customer Name: Shenzhen Feixin Wireless Communication Co., Ltd. 项目名称Project Name：2.4/5G Dippole antenna 客户地址Customer ARoom 305, Building A, Changjing Robot Industrial Park, Guanhu Street, Longhua District, Shenzhen 规格描述Product Spec：YG-2458-SMAJ-108 版 本 REV： V1.0 日 期 Date： ： 2023.03.06 制 作 drawing 审 核 check 批 准 approved 金勇 陈小华 Andy Shenzhen Feixin Wireless Communication Co., Ltd. 深圳公司：深圳市龙华区观湖街道长京机器人产业园A 栋305 室 上海公司：上海市松江区鼎源路618 号16 栋202 电话：+86-021-52060235 传真：+86-021-34711533 测试设备及原理Testing Equipment and Principle 1. 测试设备： 网络分析仪Network Analyzers : Agilent 8753D 5071B 综合测试仪Communications Test Set: Agilent E5515C 3D暗室测试系统 3D Chamber Test System： 2. 测试原理： Shenzhen Feixin Wireless Communication Co., Ltd. 深圳公司：深圳市龙华区观湖街道长京机器人产业园A 栋305 室 上海公司：上海市松江区鼎源路618 号16 栋202 电话：+86-021-52060235 传真：+86-021-34711533 一、Electrical and mechanical properties 电 性 能 指 标 Electrical Specifications 频率范围 2.4/5GHZ Frequency Range 2.4/5.8GHZ 电压驻波比 ≤2.0 VSWR ≤2.0 增益 ≤3DBI GAIN ≤3DBI 辐射方式 全向 Radiation OMNI 极化方式 垂直 Polarizatin LINEAR 输入阻抗 50 Ω Input Impedance 50 Ω 机 械 指 标 Mechanical Specifications 接口形式 SMA-K Input connector SMA-K 天线材质 ABS & COPPER Antenna materia ABS & COPPER 工作温度 -30°C~+80°C Working Temperature -30°C~+80°C 工作湿度 40~85% Working Humidity 40~85% Shenzhen Feixin Wireless Communication Co., Ltd. 深圳公司：深圳市龙华区观湖街道长京机器人产业园A 栋305 室 上海公司：上海市松江区鼎源路618 号16 栋202 电话：+86-021-52060235 传真：+86-021-34711533 二、Antenna Photo & Length (mm) 深圳飞芯无线通讯有限公司 保 密 要 求 本公司已拥有专有技术所提供的资料，这些专有资料应严加保密，在未经深圳飞芯无线通讯有限公司事先书面同意的时不允 许透露给任何人或公司。 深圳公司：深圳市龙华区观湖街道长京机器人产业园A栋305室 上海公司：上海市松江区鼎源路618号16栋202电话：+86-021-52060235传真：+86-021-34711533 http://www.flxant.comhttp://www.fly-core.com Page 5 四、 Structural drawings Shenzhen Feixin Wireless Communication Co., Ltd. 深圳公司：深圳市龙华区观湖街道长京机器人产业园A 栋305 室 上海公司：上海市松江区鼎源路618 号16 栋202 电话：+86-021-52060235 传真：+86-021-34711533 三、Passive test data 四、Gain efficiency test data Shenzhen Feixin Wireless Communication Co., Ltd. 深圳公司：深圳市龙华区观湖街道长京机器人产业园A 栋305 室 上海公司：上海市松江区鼎源路618 号16 栋202 电话：+86-021-52060235 传真：+86-021-34711533 五、Directivity test data Shenzhen Feixin Wireless Communication Co., Ltd. 深圳公司：深圳市龙华区观湖街道长京机器人产业园A 栋305 室 上海公司：上海市松江区鼎源路618 号16 栋202 电话：+86-021-52060235 传真：+86-021-34711533 六、 可靠性试验报告 项目 测试条件 规格 储存环境 在没有指定的情况下测试温度、湿度、气压如下： 1. 温度为-40°C～+85°C 2.相对湿度为45%-85% 3.气压为86kpa-106kpa 电气机械性能正常 高低温试验 在70°C与-40°C之间进行5次循环，然后在正常条件下 1-2H，检查外观质量。 尺寸应满足规定并应 满足满足 于机械、电气性能 耐恒定湿热 试验 相对湿度95±3%，试验温度：40°C.持续2H作用后， 试品取出后5min之内测定电气性能，试品在正常条 件下1-2H，检查外观质量 尺寸应满足规定并应 满足满足 于机械、电气性能 振动试验 振频范围10-55HZ，位移幅值：0.35MM，加速度幅值： 50.0M/S，扫频循环次数：30次 电气机械性能正常 跌落试验 1M高空按照互相垂直的轴方向自由跌落3次 电气机械性能正常 产品包装规范Code for product packaging 产品名称/规格 Shenzhen Feixin Wireless Communication Co., Ltd. 深圳公司：深圳市龙华区观湖街道长京机器人产业园A 栋305 室 上海公司：上海市松江区鼎源路618 号16 栋202 电话：+86-021-52060235 传真：+86-021-34711533 一、标签要求 ****** ****** 采购单号 ************* 采购单号 ************* 物料编码 ***************** 物料编码 ***************** 品名规格 ******** 品名规格 ******* 数量/单位 ***** 数量/单位 ***** 备注 ************* 备注 ************* 二、装箱要求 作业说明： 1．内包装： 产品 50 PCS一小袋 2．外包装： 根据实际数量定数量/箱 注意事项： 1．是否要增设隔板、珍珠棉； 2．标签的贴附，如ROHS等；

Shenzhen Sanchong Technology Co., Ltd Product Similarity Declaration Company: Shenzhen Sanchong Technology Co., Ltd Address: 206, 2nd Floor, No. 25-3 Wulian Road, Longxi Community, Longgang Street, Longgang District, Shenzhen Product Name: Pet feeder Model Number: SC-A60V SC-A90K, SC-A90W, SC-A90V, SC-A60K, SC-A60W, SC-A80K, SC-A80W, SC-A80V FCC Identifier: 2BKIT-SCA60V Applicant’s FRN: 0035852557 We (Shenzhen Sanchong Technology Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and appearance color. Client’s signature Name: Jack bu Date: 2024-08-13 Title: Manager Signature of applicant:

Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240621017-1ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 47 FCC Part 15C Test Report FCC ID: 2BKIT-SCA60V Applicant: Shenzhen Sanchong Technology Co., Ltd Address: 206, 2nd Floor, No. 25-3 Wulian Road, Longxi Community, Longgang Street, Longgang District, Shenzhen Manufacturer: Shenzhen Sanchong Technology Co., Ltd Address: 206, 2nd Floor, No. 25-3 Wulian Road, Longxi Community, Longgang Street, Longgang District, Shenzhen EUT: Pet feeder Trade Mark: N/A Model Number: SC-A60V SC-A90K, SC-A90W, SC-A90V, SC-A60K, SC-A60W, SC-A80K, SC-A80W, SC-A80V Date of Receipt: Jun. 21, 2024 Test Date: Jun. 21, 2024 - Jul. 08, 2024 Date of Report: Jul. 08, 2024 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10:2013 Test Result: Pass Report Number: DL-240621017-1ER Prepared (Test Engineer): Dimon Tan Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240621017-1ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 47 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 MEASUREMENT UNCERTAINTY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 DESCRIPTION OF TEST MODES 6 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 6 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 7 2.5 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 7 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 8 3 . EMC EMISSION TEST 9 3.1 CONDUCTED EMISSION MEASUREMENT 9 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 9 3.1.2 TEST PROCEDURE 9 3.1.3 DEVIATION FROM TEST STANDARD 9 3.1.4 TEST SETUP 10 3.1.5 EUT OPERATING CONDITIONS 10 3.1.6 TEST RESULTS 10 3.2 RADIATED EMISSION MEASUREMENT 13 3.2.1 RADIATED EMISSION LIMITS 13 3.2.2 TEST PROCEDURE 14 3.2.3 DEVIATION FROM TEST STANDARD 14 3.2.4 TEST SETUP 14 3.2.5 EUT OPERATING CONDITIONS 15 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 16 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 17 3.2.8 TEST RESULTS (1GHZ~25GHZ) 21 3.3 RADIATED BAND EMISSION MEASUREMENT 25 3.3.1 TEST REQUIREMENT: 25 3.3.2 TEST PROCEDURE 25 3.3.3 DEVIATION FROM TEST STANDARD 25 3.3.4 TEST SETUP 26 3.3.5 EUT OPERATING CONDITIONS 26 3.4 CONDUCTED BAND EDGE EMISSION&CONDUCTED SPURIOUS EMISSIONS MEASUREMENT 31 3.4.1 APPLICABLE STANDARD 31 3.4.2 TEST PROCEDURE 31 3.4.3 DEVIATION FROM STANDARD 31 3.4.4 TEST SETUP 31 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240621017-1ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 47 Table of Contents Page 3.4.5 EUT OPERATION CONDITIONS 31 3.4.6 TEST RESULTS 31 4 . AVERAGE OUTPUT POWER 35 4.1 APPLIED PROCEDURES / LIMIT 35 4.1.1 TEST PROCEDURE 35 4.1.2 DEVIATION FROM STANDARD 35 4.1.3 TEST SETUP 35 4.1.4 EUT OPERATION CONDITIONS 35 4.1.5 TEST RESULTS 36 5 . POWER SPECTRAL DENSITY TEST 39 5.1 APPLIED PROCEDURES / LIMIT 39 5.1.1 TEST PROCEDURE 39 5.1.2 DEVIATION FROM STANDARD 39 5.1.3 TEST SETUP 39 5.1.4 EUT OPERATION CONDITIONS 39 5.1.5 TEST RESULTS 40 6 . 6DB BANDWIDTH TEST 43 6.1 APPLIED PROCEDURES / LIMIT 43 6.1.1 TEST PROCEDURE 43 6.1.2 DEVIATION FROM STANDARD 43 6.1.3 TEST SETUP 43 6.1.4 EUT OPERATION CONDITIONS 43 6.1.5 TEST RESULTS 44 7 . ANTENNA REQUIREMENT 47 7.1 STANDARD REQUIREMENT 47 7.2 EUT ANTENNA 47 8 . TEST SEUUP PHOTO 47 9 . EUT PHOTO 47 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240621017-1ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 47 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.205, 15.209, 15.247(d) Radiated Spurious Emission PASS 15.205, 15.247(d) Band Edge Emission& Conducted Spurious Emissions PASS 15.247(b) Average Output Power PASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Test lab: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China FCC Test Firm Registration Number: 854456 Designation Number: CN1307 IC Registered No.: 27485 CAB ID.: CN0118 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% 8 6dB Bandwidth ±0.2MHz Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240621017-1ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 47 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Pet feeder Trademark N/A Model No.: SC-A60V SC-A90K, SC-A90W, SC-A90V, SC-A60K, SC-A60W, SC-A80K, SC-A80W, SC-A80V Model Difference The product's different for model number and appearance color. Operation Frequency: 2412~2462 MHz for 802.11b/g/nHT20 2422~2452 MHz for 802.11nHT40 Channel numbers: 11 Channels for 802.11b/g/n(HT20) 7 channels for 802.11nHT40 Channel separation: 5MHz Modulation technology: 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n(20/40): OFDM(QPSK, BPSK, 16-QAM, 64-QAM) Rate of Transmitt…

Text truncated - open the document above for the full version.

Shenzhen DL Testing Technology Co., Ltd. EUT TEST PHOTO Radiated Measurement Photos Shenzhen DL Testing Technology Co., Ltd. Conducted Emission Photos ※※※※※ END OF REPORT ※※※※※