2BKQA-N100MINI PC

Guangzhou Maosheng electronic Technology Co., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 10, 2024 FCC ID: 2BKQA-N100 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Guangzhou Maosheng electronic Technology Co., LTD certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Guangzhou Maosheng electronic Technology Co., LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Guangzhou Maosheng electronic Technology Co., LTD Address: B619, Zhongke Chuanggu Crowd Space, Room 619, No.2, Tengfei 1st St., Zhongxin Guangzhou Knowledge City, Huangpu District, Guangzhou, China Contact Person: Wuxiong Tang Tel.: +86 15918672144 Email: [email protected] Sincerely, Signature:

Guangzhou Maosheng electronic Technology Co., LTD U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: September 10, 2024 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BKQA-N100 Guangzhou Maosheng electronic Technology Co., LTD(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Guangzhou Maosheng electronic Technology Co., LTD FRN: 0035889864 Address: B619, Zhongke Chuanggu Crowd Space, Room 619, No.2, Tengfei 1st St., Zhongxin Guangzhou Knowledge City, Huangpu District, Guangzhou, China Signature: Contact Person: Wuxiong Tang Tel: +86 15918672144 Email: [email protected]

Guangzhou Maosheng electronic Technology Co., LTD Date: September 10, 2024 Product Model Number: N100 16G+512GB, N100 8G+256GB, N100 16G+1TB, N95 16G+512GB, N95 8G+256GB, 5700U 16G+512GB, 5800U 16G+512GB, 5700U 16G+1TB, N200 16G+512GB To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Wuxiong Tang Contact Listed on FCC Wesbite Email: [email protected] Telephone: +86 15918672144 On behalf of: Guangzhou Maosheng electronic Technology Co., LTD

Guangzhou Maosheng electronic Technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 10, 2024 Subject; Request for Confidentiality FCC ID: 2BKQA-N100 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Wuxiong Tang

Guangzhou Maosheng electronic Technology Co., LTD Model Difference Statement Dear Sir/Madam, Added models N100 8G+256GB, N100 16G+1TB, N95 16G+512GB, N95 8G+256GB, 5700U 16G+512GB, 5800U 16G+512GB, 5700U 16G+1TB, N200 16G+512GB basis of the original product N100 16G+512GB. The color of appearance, model name and memory configuration of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Wuxiong Tang Company name: Guangzhou Maosheng electronic Technology Co., LTD Address: B619, Zhongke Chuanggu Crowd Space, Room 619, No.2, Tengfei 1st St., Zhongxin Guangzhou Knowledge City, Huangpu District, Guangzhou, China

Page 1 of 4 1. General Information 1.1 Antenna Information Manufacturer: Shenzhen Yi Sheng Bang technology Co., LTD Address of Manufacturer: 101, Building C, Shenzhen Qianwan Hard Science and Technology Industrial Park, Bao 'an District, Shenzhen, China Product Name: FPCB Antenna Model Name: SLK-ZC-3134A Frequency Range: 2400-2500MHz, 5150-5850MHz Type of Antenna: FPCB Antenna Antenna Gain: 3.33dBi (Max.) Impedance: 50 ohm Antenna View: Unit: mm Page 2 of 4 2. Antenna Specification information 2.1 Gain Frequency Peak Gain (dBi) Polarity 2400MHz 2.80 Horizontal 2400MHz 2.38 Vertical 2450MHz 2.67 Horizontal 2450MHz 2.57 Vertical 2500MHz 2.21 Horizontal 2500MHz 2.19 Vertical 5150MHz 2.72 Horizontal 5150MHz 2.27 Vertical 5500MHz 3.33 Horizontal 5500MHz 2.98 Vertical 5850MHz 3.00 Horizontal 5850MHz 2.75 Vertical Page 3 of 4 2.2 Radiation Pattern View Page 4 of 4

Page 1 of 4 1. General Information 1.1 Antenna Information Manufacturer: Shenzhen Yi Sheng Bang technology Co., LTD Address of Manufacturer: 101, Building C, Shenzhen Qianwan Hard Science and Technology Industrial Park, Bao 'an District, Shenzhen, China Product Name: FPCB Antenna Model Name: SLK-ZC-3134B Frequency Range: 2400-2500MHz, 5150-5850MHz Type of Antenna: FPCB Antenna Antenna Gain: 3.72dBi (Max.) Impedance: 50 ohm Antenna View: Unit: mm Page 2 of 4 2. Antenna Specification information 2.1 Gain Frequency Peak Gain (dBi) Polarity 2400MHz 2.29 Horizontal 2400MHz 2.22 Vertical 2450MHz 3.39 Horizontal 2450MHz 2.89 Vertical 2500MHz 3.44 Horizontal 2500MHz 3.01 Vertical 5150MHz 3.72 Horizontal 5150MHz 2.50 Vertical 5500MHz 2.83 Horizontal 5500MHz 2.46 Vertical 5850MHz 2.99 Horizontal 5850MHz 2.56 Vertical Page 3 of 4 2.2 Radiation Pattern View Page 4 of 4

Report No: SSP24080205-1&2&3 FCC ID: 2BKQA-N100 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

FCC ID: 2BKQA-N100 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f2) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f2) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2, Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation BR+EDR Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 8DPSK 4.9 3.09 0.0012 1.0 PASS 2.4G Wi-Fi Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 15.97 39.54 0.0174 1.0 PASS 5.2G Wi-Fi Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11ac 11.18 13.12 0.0056 1.0 PASS 5.8G Wi-Fi Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11a 12.46 17.62 0.0075 1.0 PASS Remark: BT antenna gain: 2.8dBi, Wi-Fi antenna gain: 2.4GHz=3.44dBi, 5GHz=3.33dBi The device can transmit with 2.4G Wi-Fi ,5.2, 5.8G Wi-Fi and BT simultaneously. Calculations for simultaneously transmit Mode Ratios Result Limit Result BR+EDR 0.0012 0.0317 1 PASS 2.4G Wi-Fi 0.0174 5.2G Wi-Fi 0.0056 5.8G Wi-Fi 0.0075 Ratios = Power Density / Power density Limit So a SAR test is not required

CCUT Testing & Certification Report No: SSP24080205-2E FCC Test Report Page 1 of 47 FCC TEST REPORT FCC ID: 2BKQA-N100 Report No. : SSP24080205-2E Applicant : Guangzhou Maosheng electronic Technology Co., LTD Product Name : MINI PC Model Name : N100 16G+512GB Test Standard : FCC Part 15.247 Date of Issue : 2024-09-06 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. CCUT Testing & Certification Report No: SSP24080205-2E FCC Test Report Page 2 of 47 Test Report Basic Information Applicant..................................: Guangzhou Maosheng electronic Technology Co., LTD Address of Applicant...............: B619, Zhongke Chuanggu Crowd Space, Room 619, No.2, Tengfei 1st St., Zhongxin Guangzhou Knowledge City, Huangpu District, Guangzhou, China Manufacturer..........................: Guangzhou Maosheng electronic Technology Co., LTD Address of Manufacturer........: B619, Zhongke Chuanggu Crowd Space, Room 619, No.2, Tengfei 1st St., Zhongxin Guangzhou Knowledge City, Huangpu District, Guangzhou, China Product Name.........................: MINI PC Brand Name.............................: - Main Model..............................: N100 16G+512GB Series Models..........................: N100 8G+256GB, N100 16G+1TB, N95 16G+512GB, N95 8G+256GB, 5700U 16G+512GB, 5800U 16G+512GB, 5700U 16G+1TB, N200 16G+512GB Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2013 Date of Test .............................: 2024-08-22 to 2024-09-04 Test Result...............................: PASS Tested By ................................: (Lorzix Luo) Reviewed By............................: (Lieber Ouyang) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. CCUT Testing & Certification Report No: SSP24080205-2E FCC Test Report Page 3 of 47 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test …

Text truncated - open the document above for the full version.