
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a Particular installation.If thise quipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
YongkangTimeElectronicTechnologyCo,Ltd. No.555JiulongNorthRoad,YongkangEconomicDevelopmentZone,JinhuaCity.Zhejiang Province,China U.S.AgentDesignationforServiceofProcess- CertificationAttestationLetter 04/09/2024 FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 ATTN.:ReviewingEngineer FCCID: 2BKS6-ZSH-Z1 FederalRegistrationNumber(FRN) 0035905165 Persection2.911(d)(7)oftheFCCrules,YongkangTimeElectronicTechnologyCo,Ltd. (“theapplicant”)certifiesthattheequipmentforwhichauthorizationissoughtisdesignatedto thefollowingU.S.agent*forserviceofprocess: FederalRegistrationNumber(FRN):0033701590 CompanyName:UUXGROUPINC PhysicalU.S.CompanyAddress:36South18thAvenue,SuiteABrighton,COUSA80601 County:Adams Agentname:JackFu AgentEmailAddress:[email protected] Theabovecontactpersonacceptstheobligationforserviceofprocess. Theapplicantacceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-related proceedinginvolvingtheequipment. ThisAgreementisvaliduntil:Eternally. ApplicantSigned: Signed: Printedname:XuWang Title:Manager: CompanyName: YongkangTimeElectronicTechnologyCo,Ltd. Date:04/09/2024 AgentSigned(ifdifferenttoApplicant): Signed: Printedname:JackFu Title:Manager CompanyName:UUXGROUPINC Date:03/09/2024 * theapplicantmustdesignateacontactlocatedintheUnitedStatesforpurposesofactingasthe applicant’sagentforserviceofprocess,regardlessofwhethertheapplicantisadomesticorforeign entity.AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforserviceofprocess.
YongkangTimeElectronicTechnologyCo,Ltd. (2024.09.29) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2BKS6-ZSH-Z1) [YongkangTimeElectronicTechnologyCo,Ltd.](“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibited fromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, (Applicantsignature) (Applicantprintedname) XuWang YongkangTimeElectronicTechnologyCo,Ltd. (2024.09.29) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2BKS6-ZSH-Z1) [YongkangTimeElectronicTechnologyCo,Ltd.](“theapplicant”)certifiesthat,asof thedateofthefilingoftheapplication,theapplicantisnotidentifiedontheCovered Listasanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname) XuWang
YongkangTimeElectronicTechnologyCo,Ltd. AgentAuthorizationLetter 2024-09-29 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeShenzhenMostTechnologyServiceCo.,Ltd.toact onourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthe signingofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuse Actof1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Name:XuWang Position:Manager CompanyName: YongkangTimeElectronicTechnologyCo,Ltd. Address:No.555JiulongNorthRoad,YongkangEconomicDevelopmentZone, JinhuaCity.ZhejiangProvince,China Tel/Fax13735700701/N/A E-Mail:[email protected]
YongkangTimeElectronicTechnologyCo,Ltd. LongTermConfidentialityRequestLetter 2024-09-29 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:CONFIDENTIALITYREQUESTFOR(FCCID:2BKS6-ZSH-Z1) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459of CFR47.Wehaverequestedthatthe -e.g.Blockdiagram -e.g.SCH -e.g.OperationalDescription requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublicreview. Theabovedocumentsarecompanyproprietaryinformationthatcouldnevergetinto thepossessionofyourcompetition. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Name:XuWang Position:Manager CompanyName: YongkangTimeElectronicTechnologyCo,Ltd. Address:No.555JiulongNorthRoad,YongkangEconomicDevelopmentZone, JinhuaCity.ZhejiangProvince,China Tel/Fax13735700701/N/A E-Mail:[email protected]
Modeldifferenceletter 2024.09.29 DearMETReviewer, ThisisanewApplicationfromYongkangTimeElectronicTechnologyCo, Ltd. ModelNo.: ZSH-Z1,ZSH-Z2,ZSH-Z3,ZSH-Z4,ZSH-Z5,ZSH-Z6,SG-26A,SG-26B, SG-26C,SG-26D,SG-26E,SG-28A,SG-28B,SG-28C,SG-28D,SG-28E OnlythemodelZSH-Z1wastested,Onlythemodel“ZSH-Z1”wastested, Theirelectricalcircuitdesign,layout,componentsusedandinternalwiringare identical,OnlythemodelnameandAppearanceisdifferent. Thankyouforyourcooperation! Yourssincerely, Signatory: Name:XuWang Position:Manager CompanyName: YongkangTimeElectronicTechnologyCo,Ltd. Address:No.555JiulongNorthRoad,YongkangEconomicDevelopmentZone,Jinhua City.ZhejiangProvince,China Tel/Fax13735700701/N/A E-Mail:[email protected]
Model No.: ZSH-Z1 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE Model No.: ZSH-Z1 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE Model No.: ZSH-Z1 TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE
Intelligentbodyfatscale Model:ZSH-Z1 FCCID:2BKS6-ZSH-Z1 Labellocation Size:30mm*25mm
ModelNo.:ZSH-Z1 Page1of3 INTERNALPHOTOOFSAMPLE INTERNALPHOTOOFSAMPLEPCB ModelNo.:ZSH-Z1 Page2of3 INTERNALPHOTOOFSAMPLEPCB INTERNALPHOTOOFSAMPLEPCB BTantenna ModelNo.:ZSH-Z1 Page3of3 BATTERYPHOTOOFSAMPLE
Shenzhen Most Technology Service Co., Ltd. No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. RF Exposure Evaluation Report Report Reference No. ..................... : FCC ID.. ........................................... : MTEB24090003-H 2BKS6-ZSH-Z1 Compiled by ( position+printed name+signature) .. : File administrators Alisa Luo Supervised by ( position+printed name+signature) .. : Test Engineer Sunny Deng Approved by ( position+printed name+signature) .. : Manager Yvette Zhou Date of issue ..................................... : Sep.02,2024 Representative Laboratory Name .: Shenzhen Most Technology Service Co., Ltd. Address ............................................ : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. Applicant’s name ............................ : Yong kang Time Electronic TechnologyCo, Ltd. Address ............................................ : No.555 Jiulong North Road, YongkangEconomic Development Z one, Jinhua City.Zhejiang Province, China Test specification/ Standard ..........: 47 CFR Part 1.1307 47 CFR Part 2.1093 TRF Originator .................................. : Shenzhen Most Technology Service Co., Ltd. Shenzhen Most Technology Service Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Most Technology Service Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Most Technology Service Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Intelligent body fat scale Trade Mark ....................................... : N/A Model/Type reference....................... : ZSH-Z1 Listed Models .................................. : ZSH-Z2,ZSH-Z3,ZSH-Z4,ZSH-Z5,ZSH-Z6,SG-26A,SG-26B, SG-26C,SG-26D,SG-26E,SG-28A,SG-28B,SG-28C, SG-28D,SG-28E Modulation Type ............................... : GFSK Operation Frequency ........................ : From 2402MHz to 2480MHz Hardware Version ............................... VCH1370-V0 Software Version................................. VCH1370-V1.1-B5DE Rating ............................................... : DC 5V by USB Port DC 3.7V by Battery Result................................................ : PASS Report No.: MTEB24090003-H Page 2 of 5 T E S T R E P O R T Equipment under Test : Intelligent body fat scale Model /Type : ZSH-Z1 Listed Models : ZSH-Z2,ZSH-Z3,ZSH-Z4,ZSH-Z5,ZSH-Z6,SG-26A, SG-26B,SG-26C,SG-26D,SG-26E,SG-28A,SG-28B, SG-28C,SG-28D,SG-28E Remark Only the model “ZSH-Z1” was tested, Their electrical circuit design, layout, components used and internal wiring are identical, Only the model name and Appearance is different. Applicant : Yong kang Time Electronic TechnologyCo, Ltd. Address : No.555 Jiulong North Road, YongkangEconomic Development Zone, Jinhua City.Zhejiang Province, China Manufacturer : Yong kang Time Electronic TechnologyCo, Ltd. Address : No.555 Jiulong North Road, YongkangEconomic Development Zone, Jinhua City.Zhejiang Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: MTEB24090003-H Page 3 of 5 1. R e v i s i o n H i s t o r y Revision Issue Date Revisions Revised By 00 2024.09.02 Initial Issue Alisa Luo Report No.: MTEB24090003-H Page 4 of 5 2. S A R E v a l u a t i o n 2.1 RF Exposure Compliance Requirement 2.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 2.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion Report No.: MTEB24090003-H Page 5 of 5 2.1.3 EUT RF Exposure Measurement Data BLE GFSK Test channel Peak Output Power (dBm) Tune up tolerance (dBm) Maximum tune-up Power (dBm) Lowest(2402MHz) 1.900 1.900±1 2.9 Middle(2440MHz) 1.497 1.497±1 2.497 Highest(2480MHz) 2.575 2.575±1 3.575 Worst case: GFSK Channel Maximum Peak Conducted Output Power (dBm) Maximum tune-up Power Calculated value Exclusion threshold SAR Test Exclusion (dBm) (mW) Highest(2480MHz) 2.575 3.575 2.28 0.72 3.0 Yes .......................THE END OF REPORT.........................
ShenzhenMostTechnologyServiceCo.,Ltd. No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark,Nanshan, Shenzhen,Guangdong,China. TESTREPORT FCCRulesPart15.247 ReportReferenceNo........................: FCCID................................................: MTEB24090003-R 2BKS6-ZSH-Z1 Compiledby (position+printedname+signature)..:FileadministratorsAlisaLuo Supervisedby (position+printedname+signature)..:TestEngineerSunnyDeng Approvedby (position+printedname+signature)..: ManagerYvetteZhou Dateofissue.........................................:Sep.02,2024 RepresentativeLaboratoryName.:ShenzhenMostTechnologyServiceCo.,Ltd. Address ................................................. : No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark, Nanshan,Shenzhen,Guangdong,China. Applicant’sname...............................:YongkangTimeElectronicTechnologyCo,Ltd. Address.................................................: No.555JiulongNorthRoad,YongkangEconomicDevelopmentZon e,JinhuaCity.ZhejiangProvince,China Testspecification/Standard ............ : FCCRulesPart15.247 TRFOriginator......................................:ShenzhenMostTechnologyServiceCo.,Ltd. ShenzhenMostTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenMostTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenMostTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription........................: Intelligentbodyfatscale TradeMark...........................: N/A Model/Typereference.........................: ZSH-Z1 ListedModels ..................................... :ZSH-Z2,ZSH-Z3,ZSH-Z4,ZSH-Z5,ZSH-Z6,SG-26A,SG-26B, SG-26C,SG-26D,SG-26E,SG-28A,SG-28B,SG-28C, SG-28D,SG-28E ModulationType..................................:GFSK OperationFrequency..........................:From2402MHzto2480MHz HardwareVersion....................................VCH1370-V0 SoftwareVersion.....................................VCH1370-V1.1-B5DE Rating ..................................................... : DC5VbyUSBPort DC3.7VbyBattery Result ..................................................... :PASS ReportNo.:MTEB24090003-RPage 2 of 38 TESTREPORT EquipmentunderTest:Intelligentbodyfatscale Model/Type:ZSH-Z1 ListedModels: ZSH-Z2,ZSH-Z3,ZSH-Z4,ZSH-Z5,ZSH-Z6,SG-26A, SG-26B,SG-26C,SG-26D,SG-26E,SG-28A,SG-28B, SG-28C,SG-28D,SG-28E Remark Onlythemodel“ZSH-Z1”wastested,Theirelectricalcircuit design,layout,componentsusedandinternalwiringare identical,OnlythemodelnameandAppearanceisdifferent. Applicant:YongkangTimeElectronicTechnologyCo,Ltd. Address: No.555JiulongNorthRoad,YongkangEconomicDevelopmentZon e,JinhuaCity.ZhejiangProvince,China Manufacturer:YongkangTimeElectronicTechnologyCo,Ltd. Address : No.555JiulongNorthRoad,YongkangEconomicDevelopmentZon e,JinhuaCity.ZhejiangProvince,China TestResult : PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:MTEB24090003-RPage 3 of 38 Contents 1.REVISIONHISTORY.........................................................................................................................4 2.TESTSTANDARDS............................................................................................................................5 3.SUMMARY...............................................................................................................................................6 3.1.GeneralRemarks.........................................................................................................................................6 3.2.ProductDescription....................................................................................................................................6 3.3.EquipmentUnderTest................................................................................................................................6 3.4.ShortdescriptionoftheEquipmentunderTest(EUT)............................................................................6 3.5.EUToperationmode....................................................................................................................................7 3.6.BlockDiagramofTestSetup......................................................................................................................7 3.7.TestItem(EquipmentUnderTest)Description*.......................................................................................7 3.8.AuxiliaryEquipment(AE)Description.......................................................................................................7 3.9.AntennaInformation*..................................................................................................................................8 3.10.EUTconfiguration......................................................................................................................................8 3.11.Modifications..............................................................................................................................................8 4.TESTENVIRONMENT.......................................................................................................................9 4.1.Addressofthetestlaboratory...................................................................................................................9 4.2.Environmentalconditions...........................................................................................................................9 4.3.TestDescription.........................................................................................................................................10 4.4.Statementofthemeasurementuncertainty.......................................................................…
Text truncated - open the document above for the full version.
蓝牙天线规格 深圳市芯海科技有限公司 版权所有 不得复制 1:Antenna Description Antenna Type Microtrip Antenna Antenna peak gain 2.6dBi Frequency range 2.402GHz~2.480GHz Connect type Direct Connect 2:Antenna picture on the PCB borad 3:Antenna radiation of 3D polar Solution frequency at 2.44G 3:Antenne radiation pattern Z-X plan Z-Y plan XY plan E plan
Model No.: ZSH-Z1 CE TEST SETUP RE TEST SETUP Model No.: ZSH-Z1 RE TEST SETUP
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.81 mW |

Bluetooth Body Fat Scale
Equipment Class
DTS - Digital Transmission System