2BKUR-B100Smart Lock

Smart Lock This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna FCC WARNING CONTENTS APP Download 3-3 APP Register 4-4 APP Use Tutorial 5-13 Product Description 14-19 Customer Q&A 20-21 B100 Smart lock 1-2 1 1.unscrew3.Install battery 2.Open the battery compartment How to install battery B100 Smart lock exterior Keypad B100 Smart lock 1.B100 is installed externally on the product 2. Install screws from the inside 2 Unlock method Bluetooth/dynamic password/period password/ static password MaterialZinc Alloy 145*63*26mm 0.4kg Size Weight Battery2*AA (alkaline battery ,not including) Battery Life1 year B100 smart lock parameters How to install lock APP Download Roles in the system 3 APP Download Add on [Member ] , the member don’t limit use-time of the lock . When a member adding , you can give the permissions ,including member manager, guest manager , set password ,check record . Add on [Guest] , you can limit use-time of the lock . Guest only can use bluetooth/dynamic password unlock The first user who scans the QR code to bind the lock , the owner has all permissions. Lock only have one owner . if others want use lock ,can add them to member or guest . https://wehereapp.we-here.com/en/app.html 1.Scan the QR code below,or visit the website to download the APP and register for an account. 2.Or you can also search“ Wehere ” in Google play or App store to download the app and register an account . 1.Phone registration 2.Email registration 3.User defined account registration （need enter sms code） （need enter Email verification code） Three registration methods 4 APP Register You can scan the qr code of lock to bind the lock. the person who first bind lock is the lock owner ,have all permissions. Open [Member] and click on the “+” to add member . The owner /member who have the permission can add[Member] or [Guest] （Note: the owner can manager member/ guest , set password ,hand over the lock) （The owner/member who have the permission can add[Member] or [Guest] ） (Note :when add a member , can give the permissions ,including member manager, guest manager , set password ,check record .) How to add the lock to wehere app How to share access rights to others 5 APP Use Tutorial Open [Guest] and click on the “+” to add Guest. (When adding guest, you can also set the access time. You don't need to delete the guest , the lock can not opend when time expired when time expired) After the members added , they can login the account and see the lock on the [My Devices] page. if don't see, pull down to refresh. After the guests added , they can login the account and see the lock on the [share Devices] page. if don't see, pull down to refresh 6 Dynamic password change each minute. How to set password Period password （you can set the password validity time） Static password. 7 8 (If your lock page is [click for OTP]，click left lower corner icon [Bluetooth] to switch .) （You can use static/period password unlocking that you set before .For dynamic password, click the center icon [click for OTP] to get） Two of Unlocking methods The owner (member who have the permission) can check the records. How to check record 1.Bluetooth unlocking 2.Password unlocking Go to lock manage page, open [Share] icon,click on [Add OTP Url]. You can set the Url access time by setting start time and send time. Click to save this url share. How to share Dynamic Password by URL 9 Click on [Copy ]icon, then can copy the url message, and send this to your friend/ guest by message. You also can delete the Url shared, after you delete, the Url can not access anymore. 10 Go to lock manager page, open [MiniERP] ,enter your keybox position number Click [Save key] icon, choose key postion ,and input comment. Mini ERP 11 click [ ]icon, and delete the record . 12 Click[Take key] icon, choose key postion, and input comment How to delete the lock Click the lock you want delete, Open[Setting] and click on [Delete lock]. How to transfer the lock Click the lock you want transfer, Open[Setting] and click on [TurnOver Lock] Enter the account you want to transfer, then this person will be the new owner of this lock. 13 MB101 B100 SmartSteel key management box 14 KB2016（Blue /Black ） KB2024（Blue /Black ） KB2048（Blue /Black ） KB2032（Blue /Black ） W:286mm H:361mm L:59mm W:286mm H:550mm L:59mm W:286mm H:210mm L:59mm W:406mm H:210mm L:59mm 15 KB2…

Text truncated - open the document above for the full version.

ShenzhenSeamooncloudTechnologyCo.,LTD 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:ShenzhenSeamooncloudTechnologyCo.,LTD Address:The2ndFloor,B1TowerOfJinshunIndustrialPark,AnliangAnjuRoad,518115, Henggang,Longgang,ShenzhenCity,China. ProductName:SmartLock FCCID:2BKUR-B100 Model(s):B100,B100-B,P101,MB100,MB200,MB300,MB202S,KB2016,KB2024,KB2032, KB2040,KB2048,KB2072,KB2096,KB2120,KB2192,KB3104,KB3056,KB501,KB503,KB521, KB7024,KB7072,SFB100,KDB201,MDB100,DB101 2.911(d)(5)(i)EquipmentType We,[ShenzhenSeamooncloudTechnologyCo.,LTD](“theapplicant”)certifythattheequipmentfor whichauthorizationissoughtthroughcertificationisnot:  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:LiPeijiDate:2024.9.10 TitleandCompanyname:Manager/ShenzhenSeamooncloudTechnologyCo.,LTD NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenSeamooncloudTechnologyCo.,LTD 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:ShenzhenSeamooncloudTechnologyCo.,LTD Address:The2ndFloor,B1TowerOfJinshunIndustrialPark,AnliangAnjuRoad,518115, Henggang,Longgang,ShenzhenCity,China. ProductName:SmartLock FCCID:2BKUR-B100 Model(s):B100,B100-B,P101,MB100,MB200,MB300,MB202S,KB2016,KB2024,KB2032, KB2040,KB2048,KB2072,KB2096,KB2120,KB2192,KB3104,KB3056,KB501,KB503,KB521, KB7024,KB7072,SFB100,KDB201,MDB100,DB101 2.911(d)(5)(ii)Applicantfiling We,[ShenzhenSeamooncloudTechnologyCo.,LTD](“theapplicant”)certifythat,asofthedateof thefilingoftheapplication,theapplicantisnotidentified NOTE1 onthe“CoveredList” NOTE2 , establishedpursuantto§1.50002ofthischapter,asanentityproducingcoveredcommunications equipment. Yourssincerely, Name:LiPeijiDate:2024.9.10 TitleandCompanyname:Manager/ShenzhenSeamooncloudTechnologyCo.,LTD NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenSeamooncloudTechnologyCo.,LTD AgentAuthorization Company:ShenzhenSeamooncloudTechnologyCo.,LTD Address:The2ndFloor,B1TowerOfJinshunIndustrialPark,AnliangAnjuRoad, 518115,Henggang,Longgang,ShenzhenCity,China. ProductName:SmartLock ModelNumber(s):B100,B100-B,P101,MB100,MB200,MB300,MB202S,KB2016, KB2024,KB2032,KB2040,KB2048,KB2072,KB2096,KB2120,KB2192,KB3104, KB3056,KB501,KB503,KB521,KB7024,KB7072,SFB100,KDB201,MDB100,DB101 ProductDescription:SmartLock WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2024.9.10 Name:LiPeiji Title:Manager Company:ShenzhenSeamooncloudTechnologyCo.,LTD

Shenzhen Seamooncloud Technology Co., LTD Model Difference Product description: Smart Lock Model name: B100, B100-B, P101, MB100, MB200, MB300, MB202S, KB2016, KB2024, KB2032, KB2040, KB2048, KB2072, KB2096, KB2120, KB2192, KB3104, KB3056, KB501, KB503, KB521, KB7024, KB7072, SFB100, KDB201, MDB100, DB101 Trade Name: WeHere FCC ID:2BKUR-B100 All the model are the same circuit and RF module, except model names and appearance color. Regards Sincerely Client’s signature: Client’s name / title: Li Peiji / Manager Contact information / address: The 2nd Floor, B1 Tower Of Jinshun Industrial Park, Anliang Anju Road, 518115, Henggang, Longgang, Shenzhen City, China.

ShenzhenSeamooncloudTechnologyCo.,LTD OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2024.9.10 Subject;RequestforConfidentiality FCCID:2BKUR-B100 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:LiPeiji Title:Manager

EUT PHOTO(External Photos)

Label & label location 20mm*10mm FCC ID:2BKUR-B100 Label location

EUT PHOTO(Internal Photos) ANT

RainSun Corporation http://www.rainsun.com 1 of 10 Aug, 2023 Ver.2.6 AN2051 Multilayer Chip Antenna for 2.4GHz Wireless Communication RainSun Corporation http://www.rainsun.com 2 of 10 Aug, 2023 Ver.2.6 AN2051 Multilayer Chip Antenna ◆ Features  Light weight and low profile 5.05mm(L)X2.0mm(W)X1.07mm(H)  Omni-directional in azimuth  Lead (Pb) Free ◆ Applications  2.4GHz wireless communications  2.4GHz Modules  Bluetooth System  802.11b/g Wireless LAN System Specifications Center frequency Peak gain Operation temperature Storage temperature VSWR Input Impedance Power handling Bandwidth Azimuth beamwidth Polarization 2.45GHz 0.5dBi -40 ~ +85 ° C -40 ~ +85 ° C 2.0 (max) 50 Ohm 2W (max) 110MHz Omni-directional Linear RainSun Corporation http://www.rainsun.com 3 of 10 Aug, 2023 Ver.2.6 Pin configuration Symbol Dimensions (mm) A5.05 ± 0.10 B2.00 ± 0.10 C0.50 ± 0.05 H1.07 ± 0.20 Dimensions Pin NoPin assignment 1Feed termination 2Feed point mark 3Solder termination 3 2 1 Top view PCB Foot Print Symbol Dimensions(mm) D1.5 E2.0 F5.1 RainSun Corporation http://www.rainsun.com 4 of 10 Aug, 2023 Ver.2.6 Ground Plane Board thickness : 0.6mm Board material : FR4 Unit : mm 50 Ohm Transmission line SMA connector Top view Bottom view Recommended Test Board Pattern Testing Setup Measurement Testing Instrument: Anritsu 37369C VNA(Vector Network Analyzer) VNA calibrate with 1 path reflection only calibration sequence on test board feed point. The test board dimension and it’s layout is the same as Fig-1. Fig-1 RainSun Corporation http://www.rainsun.com 5 of 10 Aug, 2023 Ver.2.6 Return loss Typical Electrical Characteristics Test setting RainSun Corporation http://www.rainsun.com 6 of 10 Aug, 2023 Ver.2.6 2.45 GHz Phi=0 Typical Radiation Patterns 2.45 GHz Phi=90 2.45 GHz Theta=90 RainSun Corporation http://www.rainsun.com 7 of 10 Aug, 2023 Ver.2.6 Typical Radiation Patterns 2.4 GHz E plan total radiation 2.45 GHz E plan total radiation RainSun Corporation http://www.rainsun.com 8 of 10 Aug, 2023 Ver.2.6 Typical Soldering Profile for Lead-free Process RainSun Corporation http://www.rainsun.com 9 of 10 Aug, 2023 Ver.2.6 Packing Blister Tape Specifications SymbolDimension Tolerance Unit W12.00 ± 0.30mm P14.00 ± 0.10mm P25.50± 0.10mm P31.75 ± 0.10mm P44.00 ± 0.10mm P52.00 ± 0.10mm D1.50 ± 0.10mm T15.40 ± 0.10mm T20.30 ± 0.05mm T32.40 ± 0.10mm T41.40 ± 0.10mm RainSun Corporation http://www.rainsun.com 10 of 10 Aug, 2023 Ver.2.6 Reel Specifications Quantity Per Reel Tape Width (mm) A (mm) C (mm) B (mm) E (mm) W (mm) W 1 (mm) 3,00012180 ± 1 13.0 ± 0.2 62 ± 0.5 2.2 ± 0.5 12 ± 0.5 16 ± 0.2

Project No.: ZKT-24090210836E Page 1 of 37 FCC TEST REPORT FCC ID:2BKUR-B100 Report Number. .............................. : ZKT-24090210836E Date of Test ................................................. : Sep. 02, 2024 to Sep. 05, 2024 Date of issue .................................... : Sep. 05, 2024 Total number of pages ...................... 37 Test Result ..................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : Shenzhen Seamooncloud Technology Co., LTD Address .......................................... : The 2nd Floor, B1 Tower Of Jinshun Industrial Park, Anliang Anju Road, 518115, Henggang, Longgang, Shenzhen City, China. Manufacturer's name ................... : Shenzhen Seamooncloud Technology Co., LTD Address .......................................... : The 2nd Floor, B1 Tower Of Jinshun Industrial Park, Anliang Anju Road, 518115, Henggang, Longgang, Shenzhen City, China. Test specification: Standard ........................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2013 Test procedure ................................. : / Non-standard test method ............. : N/A Test Report Form No. .................... : / Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Smart Lock Trademark ...................................... : WeHere Model/Type reference......................: B100 B100-B, P101, MB100, MB200, MB300, MB202S, KB2016, KB2024, KB2032, KB2040, KB2048, KB2072, KB2096, KB2120, KB2192, KB3104, KB3056, KB501, KB503, KB521, KB7024, KB7072, SFB100, KDB201, MDB100, DB101 Ratings ............................................: Input: 3V (1.5V AAA battery * 2pcs) Project No.: ZKT-24090210836E Page 2 of 37 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Jeff Fu Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-24090210836E Page 3 of 37 Table of Contents Page 1.VERSION ............................................................................................................................................. 5 2. SUMMARY OF TEST RESULTS ........................................................................................................ 6 2.1 TEST FACILITY ................................................................................................................................ 7 2.2 MEASUREMENT UNCERTAINTY .................................................................................................... 7 3. GENERAL INFORMATION ................................................................................................................ 8 3.1 GENERAL DESCRIPTION OF EUT ................................................................................................. 8 3.2 DESCRIPTION OF TEST MODES ................................................................................................... 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED ............................... 9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ........................................................ 9 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS .................................................................................. 10 4. EMC EMISSION TEST ..................................................................................................................... 12 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................................. 12 4.1.1 POWER LINE CONDUCTED EMISSION Limits ....................................................................... 12 4.1.2 TEST PROCEDURE .................................................................................................................. 12 4.1.3 DEVIATION FROM TEST STANDARD ..................................................................................... 12 4.1.4 TEST SETUP ............................................................................................................................. 13 4.1.5 EUT OPERATING CONDITIONS .............................................................................................. 13 4.2.1 Radiated Emission Limits ........................................................................................................... 14 4.2.2 TEST PROCEDURE .................................................................................................................. 15 4.2.3 DEVIATION FROM TEST STANDARD ..................................................................................... 15 4.2.4 TEST SETUP ............................................................................................................................. 15 4.2.5 EUT OPERATING CONDITIONS .............................................................................................. 16 5.RADIATED BAND EMISSION MEASU…

Text truncated - open the document above for the full version.

EUT TEST PHOTO