2BKVL-SICW01Smart Irrigation Controller

SMART IRRIGATION CONTROLLER SICW01 USER MANUAL 1. Introduction Thank you for purchasing the SICW01 Smart Irrigation Controller. The product is WiFi&BLE-enabled. This accompanying manual provides comprehensive guidance on the product's installation and usage. Prior to employing the device, it is crucial to read and comprehend the manual thoroughly and adhere to its stipulations. This product is ideal for irrigation of plants, including flowers, trees, grains, and vegetables, in electric supply environment within greenhouses, courtyards, and outdoor planting areas. 2. Product Description · Wireless Network Remote Control: Through the pairing operation of the mobile phone and the device, the device can be wireless connected to the WIFI network or hot spot, and the user can remotely control the irrigation task, monitor the weather and the implementation of the plan. Compatible with traditional manual button operation, instant and fast irrigation. · Multi-channel sequential irrigation：The smart irrigation controller has one master valve (pump) control port and eight irrigation output ports. Each irrigation output port corresponds to an watering zone, and two electromagnetic water valves can be connected in parallel to irrigate simultaneously, which can be expanded to control up to 16 irrigation points (locations). Each set zone is irrigated successively in each period to ensure sufficient water pressure and reduce the load of equipment and power supply. ·Scheduled timing control：Users can plan the scheduled irrigation tasks of the device, set the irrigation start time of the task, irrigation zones, irrigation duration for a zone, and set the cycle period of the task. A plan can contain multiple timed irrigation tasks, and the device is executed as planned. ·Intelligent weather and environment detection：Users enable the intelligent weather function in the APP, if the weather report is freezing, windy, rain and snow, you can set to not perform irrigation tasks. (After rain and snow, scheduled irrigation can be postponed for several days.). Enable a (soil) sensor to detect soil moisture and stop irrigation if soil is wet. ·Sharing equipment：Users can share the irrigator equipment to family members or colleagues through the Jusbtek account through the device management in the APP, so that the shared person can also operate and control the equipment. ·Offline Irrigation:：After the device is successfully paired with a Wi-Fi network or hotspot, it can set up scheduled irrigation tasks, and the device can still execute the scheduled irrigation tasks even when it is offline. • AC Low voltage power supply, easy installation：The irrigation device is supplied with AC 24V low voltage power through a power adapter to ensure safety. Users only need to fix the irrigation device in a location that can avoid rain and moisture, connect the corresponding wires to the interface terminals, turn on the power, and pair it with the mobile APP to use it. • Directly drive water pump：The controller and solenoid water valves are supplied with DC 24V low voltage power through a power adapter to ensure safety. The controller can directly drive the water pump by connecting the electric supply, which saves the installation and cost. Water pumps are needed in some places to pump water from wells and other sources. 3. Product Information 3.1 Product Parameters Power Adapter AC Input: AC 120V （depending on electric supply ,AC 220V in china）, Output：AC/DC 24V，2A Input Voltage AC/DC 24V AC/DC Irrigation output ports AC/DC 8 Channels（8 zones, each controlled independently） Master Valve (Pump) Control Port AC/DC 1 Channel Extended Irrigation Point 16 Transmission Protocol Wi-Fi + Bluetooth LE User Interface Jusbtek Smart Phone APP＆ Button Output Device AC solenoid water valve (rated voltage AC/DC 24V, one single valve power ≤20VA), Recommend selecting low- temperature solenoid valve with power ≤ 10VA 3.2 Notice This product should not be used in rainy and humid environments (wet location). If used outdoors, it should be fixed in a building or box that is waterproof and moisture-proof. The building or box should not be made up of excessive metal materials, as this can interfere with the transmission of wireless network signals. The suitable temperature range for irrigation work is 0°C to 30°C. •To ensure the safety of you and your family, make sure the power is turned off or disconnected during installation to avoid the risk of electric shock or damage to the equipment! •Children are not allowed to install or use this product alone. • The water pressure will inevitably decrease after passing through the water valve.The valve flow diameter is required to be larger than that of the nozzle, and it is not recommended to connect two or more nozzles with one valve. •To fully use this product, you need 2.4G WIFI connected to the Internet, and first download the "Jusbtek Smart" app Easy smart APP anytime, anywhere 4. Safety Advice and Warnings Warning! Please read the following instructions carefully before installing or using this product. Always adhere to local regulations carefully when installing or using this product! Do not disassemble this product. Disassembling or modifying the product can be dangerous and will void the warranty. This product may cause interference to radio equipment. It should not be installed near the maritime safety communication equipment or other critical navigation and communication equipment operating between 0.45 and 30 MHZ. Do not use this product when the power cable is damaged, or the fixed wires are loose, or the line is short-circuited. Do not expose this product to - Condensation, moisture, fog, fog or direct spray on the product The product should be used within the specified temperature range (-15 to 45 ̊ C) - Direct sunlight or HID lamps during use may heat the aging product housing Always disconnect the product from the power supply before performing any maintenance. Do not use the product near fla…

Text truncated - open the document above for the full version.

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Conin Electronics Co., Ltd. Address: No.212, Tongrui East Road, Economic Development Zone Guangde, Anhui Province, China Phone: +86-18606875996 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. FCC ID: 2BKVL-SICW01 If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-09-09 Signature Date Name / Title: Yajun Li / CEO Company: Conin Electronics Co., Ltd. Address: No.212, Tongrui East Road, Economic Development Zone Guangde, Anhui Province, China Phone: +86-18606875996 Fax: N/As E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BKVL-SICW01 SICW01 We, applicant Company Name: Conin Electronics Co., Ltd. Address: No.212, Tongrui East Road, Economic Development Zone Guangde, Anhui Province, China Phone: +86-18606875996 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-09-09 Signature Date Name / Title: Yajun Li / CEO Company: Conin Electronics Co., Ltd. Address: No.212, Tongrui East Road, Economic Development Zone Guangde, Anhui Province, China Phone: +86-18606875996 Fax: N/As E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BKVL-SICW01 SICW01 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:  the Operational Description  the Block Diagram  the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-09-09 Name / Title: Yajun Li / CEO Company: Conin Electronics Co., Ltd. Address: No.212, Tongrui East Road, Economic Development Zone Guangde, Anhui Province, China Phone: +8618606875996 Fax: / E-Mail: [email protected]

Page 1 of 1 Rev.2.0 Conin Electronics Co., Ltd. WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BKVL-SICW01 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo- location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Yajun Li / CEO Signature: Phone: +86-18606875996 Email: [email protected] Date: 2024-09-09

FCC ID: 2BKVL-SICW01 Fig. 1 Fig. 2 Version A FCC ID: 2BKVL-SICW01 Fig. 3 Fig. 4 FCC ID: 2BKVL-SICW01 Fig. 5 Fig. 6 FCC ID: 2BKVL-SICW01 Fig. 7 Fig. 8 FCC ID: 2BKVL-SICW01 Fig. 9 Fig. 10 Version B FCC ID: 2BKVL-SICW01 Fig. 11 Fig. 12 FCC ID: 2BKVL-SICW01 Fig. 13 Fig. 14 FCC ID: 2BKVL-SICW01 Fig. 15 Fig. 16 FCC ID: 2BKVL-SICW01 Fig. 17

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L7.00cm x 4.00cm) Label Location Smart Irrigation Controller Module: SF1534A FCC ID: 2BKVL-SICW01 Input: AC 24.0V/2.0A or DC 24.0V/2.0A

FCC ID: 2BKVL-SICW01 Fig. 1 Fig. 2 Version A FCC ID: 2BKVL-SICW01 Fig. 3 Fig. 4 FCC ID: 2BKVL-SICW01 Fig. 5 Fig. 6 BT& WLAN Antenna Version B FCC ID: 2BKVL-SICW01 Fig. 7 Fig. 8 FCC ID: 2BKVL-SICW01 Fig. 9 Fig. 10 BT&WLAN Antenna

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‟an District, Shenzhen, China RF Exposure evaluation Report Reference No. ................. : FCC ID. ......................................... : CTA24061300803 2BKVL-SICW01 Compiled by ( position+printed name+signature): File administrators Jinghua Xiao Supervised by ( position+printed name+signature): Test Engineer Lushan Kong Approved by ( position+printed name+signature) . : Manager Eric Wang Date of issue .................................... : Jul.24, 2024 Representative Laboratory Name ....................................................... : Shenzhen CTA Testing Technology Co., Ltd. Address ......................................... : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao„an District, Shenzhen, China Applicant’s name ............................ : Conin Electronics Co., Ltd. Address ............................................ : No.212, Tongrui East Road, Economic Development Zone Guangde, Anhui Province, China Test specification ........................ : Standard ........................................ : 47CFR §1.1310 Basis and purpose 47CFR §2.1091 Radiofrequency radiation exposure evaluation: mobile devices TRF Originator .............................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ................................... : Dated 2014-12 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................. : Smart Irrigation Controller Trade Mark .................................... : N/A Manufacturer ................................. : Conin Electronics Co., Ltd. Model/Type reference ................... : SICW01 Listed Models .............................. : N/A Hardware Version ........................ : R2V8/ R3VC Software Version ........................... : V1.0.4 Rating ............................................ : AC 24.0V/2.0A by Adapter or DC 24.0V/2.0A by Adapter Result ............................................ : PASS Report No.: CTA24061300803 Page 2 of 11 T E S T R E P O R T Test Report No. : CTA24061300803 Jul.24, 2024 ______________________________________________________________________________________________ Date of issue Equipment under Test : Smart Irrigation Controller Model /Type : SICW01 Listed model : N/A Applicant : Conin Electronics Co., Ltd. Address : No.212, Tongrui East Road, Economic Development Zone Guangde, Anhui Province, China Manufacturer : Conin Electronics Co., Ltd. Address : No.212, Tongrui East Road, Economic Development Zone Guangde, Anhui Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24061300803 Page 3 of 11 Contents 1. SUMMARY ................................................................................................................................................................. 4 1.1 EUT CONFIGURATION ........................................................................................................................................................ 4 1.2 PRODUCT DESCRIPTION ..................................................................................................................................................... 4 2. TEST ENVIRONMENT ................................................................................................................................................. 5 2.1 ADDRESS OF THE TEST LABORATORY ..................................................................................................................................... 5 2.2 TEST FACILITY .................................................................................................................................................................. 5 2.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................................ 5 2.4 STATEMENT OF THE MEASUREMENT UNCERTAINTY .................................................................................................................. 5 3. METHOD OF MEASUREMENT .................................................................................................................................... 6 3.1 APPLICABLE STANDARD ...................................................................................................................................................... 6 3.2 REQUIREMENT ................................................................................................................................................................. 6 3.3 LIMIT ............................................................................................................................................................................. 6 3.4 MPE CALCULATION METHOD ............................................................................................................................................. 7 3.5 ANTENNA INFORMATION ................................................................................................................................................... 7 4. CONDUCTED POWER RESULTS ................................................................................................................................... 8 5. MANUFACTURING TOLERANCE ..................................................…

Text truncated - open the document above for the full version.

CBU Antenna test report Product Name: CBU Antenna Type: PCB antenna Writer: Yinhua Zhang Maximum Gain：2.20dBi Efficiency:32.96% CBU Antenna test report Version 1.0.0 Date：2020-11-24 NO：0000000001 Antenna Test Report Global Intelligent Platform Hangzhou Tuya Information Technology Co ., Ltd Room701, Building3, More Center,No.87 GuDun Road , Hangzhou, Zhejiang, China CBU Antenna test report Content 1. General Description ............................................................................. 3 2. Technical Information .......................................................................... 3 3. Test Standards ...................................................................................... 3 4. Test Item .............................................................................................. 4 5. Test Photo ............................................................................................ 4 Appendix A S11/VSWR ........................................................................... 5 Appendix B Gain and Efficiency ............................................................. 6 Appendix C Radiation Pattern(1D and 3D) .............................................. 7 Appendix D Test Setup Photo .................................................................. 9 Appendix E EUT Photo ............................................................................ 9 CBU Antenna test report 1.General Description EUT Name CBU Antenna Wireless type WIFI Antenna Type PCB antenna Dimensions Appendix A 2.Technical Information Frequency Range 2402MHz~2480MHz Test Frequency 2400,2410......2500MHz 3.Test Standards Identity Document Title IEEE 149-1979 IEEE Standard Test Procedures for Antennas CBU Antenna test report 4.Test Item Report Section Description Appendix B S11/VSWR Appendix C Gain and Efficiency Appendix D Radiation Pattern（1D and 3D） 5.Test Photo Report Section Description Appendix E Test Setup Photo CBU Antenna test report Appendix A Antenna Dimension Appendix B S11/VSWR Frequency (MHz) 240024502500 Return Loss-8.73-11.76-11.21 CBU Antenna test report VSWR 2.161.711.77 Appendix C Gain and Efficiency Frequency (MHz) Efficiency(%) Gain（dBi） 2400 32.36% 2.11 2410 32.3% 2.18 2420 32.1% 2.20 2430 32.4% 2.06 2440 32.9% 2.07 2450 30.9% 1.91 2460 30.8% 2.04 2470 30.7% 2.09 2480 31.6% 1.98 2490 30.6% 1.91 2500 30.5% 1.03 CBU Antenna test report Appendix D Radiation Pattern(1D and 3D) CBU Antenna test report CBU Antenna test report Appendix E Test Setup Photo

FCC ID: 2BKVL-SICW01 1 Case No. : CTA24061300801 Ambient Condition: 23 °C, 49 %RH According Standard: ■Part15C Test Date: 2024.7.1 Test Engineer: Lushan Kong Appendix A.1: DTS Bandwidth Test Result TestMode Antenna Freq(MHz) DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE Ant1 2402 0.728 2401.576 2402.304 0.5 PASS 2440 0.724 2439.576 2440.300 0.5 PASS 2480 0.740 2479.572 2480.312 0.5 PASS FCC ID: 2BKVL-SICW01 2 Test Graphs BLE_Ant1_2402 BLE_Ant1_2440 BLE_Ant1_2480 FCC ID: 2BKVL-SICW01 3 FCC ID: 2BKVL-SICW01 4 Appendix A.2: Occupied Channel Bandwidth Test Result TestMode Antenna Freq(MHz) OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE Ant1 2402 1.0446 2401.4223 2402.4669 --- --- 2440 1.0436 2439.4228 2440.4664 --- --- 2480 1.0420 2479.4220 2480.4640 --- --- FCC ID: 2BKVL-SICW01 5 Test Graphs BLE_Ant1_2402 BLE_Ant1_2440 BLE_Ant1_2480 FCC ID: 2BKVL-SICW01 6 FCC ID: 2BKVL-SICW01 7 Appendix A.3: Maximum conducted output power Test Result Peak TestMode Antenna Freq(MHz) Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict BLE Ant1 2402 1.19 ≤30 PASS 2440 2.69 ≤30 PASS 2480 1.19 ≤30 PASS FCC ID: 2BKVL-SICW01 8 Appendix A.4: Maximum power spectral density Test Result TestMode Antenna Freq(MHz) Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE Ant1 2402 -14.75 ≤8.00 PASS 2440 -13.95 ≤8.00 PASS 2480 -15.15 ≤8.00 PASS Note： 1. The Duty Cycle Factor and RBW Factor is compensated in the graph. FCC ID: 2BKVL-SICW01 9 Test Graphs BLE_Ant1_2402 BLE_Ant1_2440 BLE_Ant1_2480 FCC ID: 2BKVL-SICW01 10 FCC ID: 2BKVL-SICW01 11 Appendix A.5: Band edge measurements Test Result TestMode Antenna ChName Freq(MHz) RefLevel[dBm] Result[dBm] Limit[dBm] Verdict BLE Ant1 Low 2402 0.04 -44.82 ≤-19.96 PASS High 2480 0.04 -45.33 ≤-19.96 PASS FCC ID: 2BKVL-SICW01 12 Test Graphs BLE_Ant1_Low_2402 BLE_Ant1_High_2480 FCC ID: 2BKVL-SICW01 13 Appendix A.6: Conducted Spurious Emission Test Result TestMode Antenna Freq(MHz) FreqRange [MHz] RefLevel [dBm] Result[dBm] Limit[dBm] Verdict BLE Ant1 2402 Reference -0.79 -0.79 --- PASS 30~1000 -0.79 -60.56 ≤-20.79 PASS 1000~26500 -0.79 -46.73 ≤-20.79 PASS 2440 Reference 0.51 0.51 --- PASS 30~1000 0.51 -60.19 ≤-19.49 PASS 1000~26500 0.51 -46.77 ≤-19.49 PASS 2480 Reference -0.75 -0.75 --- PASS 30~1000 -0.75 -60.21 ≤-20.75 PASS 1000~26500 -0.75 -47 ≤-20.75 PASS FCC ID: 2BKVL-SICW01 14 Test Graphs BLE_Ant1_2402_0~Reference BLE_Ant1_2402_30~1000 BLE_Ant1_2402_1000~26500 FCC ID: 2BKVL-SICW01 15 BLE_Ant1_2440_0~Reference BLE_Ant1_2440_30~1000 FCC ID: 2BKVL-SICW01 16 BLE_Ant1_2440_1000~26500 BLE_Ant1_2480_0~Reference BLE_Ant1_2480_30~1000 FCC ID: 2BKVL-SICW01 17 BLE_Ant1_2480_1000~26500 FCC ID: 2BKVL-SICW01 18 Appendix A.7: Emissions in Restricted Bands Test Result TestMode Antenna ChName Freq(MHz ) Detector Freq [MHz] Result [dBm] Limit [dBm] Result [dBuV/m] Limit [dBuV/m] Verdict BLE Ant1 Low 2402 AV 2310.000 -49.46 ≤-41.20 45.74 ≤54 PASS AV 2389.670 -47.66 ≤-41.20 47.54 ≤54 PASS AV 2390.000 -47.69 ≤-41.20 47.51 ≤54 PASS Peak 2310.000 -45.16 ≤-21.20 50.04 ≤74 PASS Peak 2347.250 -39.34 ≤-21.20 55.86 ≤74 PASS Peak 2390.000 -43.81 ≤-21.20 51.39 ≤74 PASS High 2480 AV 2483.500 -43.18 ≤-41.20 52.02 ≤54 PASS AV 2483.520 -43.18 ≤-41.20 52.02 ≤54 PASS AV 2500.000 -48.08 ≤-41.20 47.12 ≤54 PASS Peak 2483.500 -39.16 ≤-21.20 56.04 ≤74 PASS Peak 2486.320 -36.27 ≤-21.20 58.93 ≤74 PASS Peak 2500.000 -42.83 ≤-21.20 52.37 ≤74 PASS Note： 1. The Antenna Gain is compensated in the graph. 2. The Duty Cycle Factor and RBW Factor is compensated in the graph. 3. The limit in dBm for average detector is conversion from 54dBuV/m, according to 15.209(a). The limit in dBm for peak detector is 20dB above the limit of average detector in dBm. FCC ID: 2BKVL-SICW01 19 Test Graphs BLE_Ant1_Low_2402_AV BLE_Ant1_Low_2402_Peak BLE_Ant1_High_2480_AV FCC ID: 2BKVL-SICW01 20 BLE_Ant1_High_2480_Peak

FCC ID: 2BKVL-SICW01 1 Case No. : CTA24061300802 Ambient Condition: 23 °C, 49 %RH, Test Date: 2024.7.1 Test Engineer: Lushan Kong Appendix B.1: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 7.840 2408.080 2415.920 0.5 PASS 2437 7.320 2433.680 2441.000 0.5 PASS 2462 7.840 2458.320 2466.160 0.5 PASS 11G Ant1 2412 16.440 2403.840 2420.280 0.5 PASS 2437 16.360 2428.840 2445.200 0.5 PASS 2462 16.320 2453.840 2470.160 0.5 PASS 11N20SISO Ant1 2412 17.680 2403.200 2420.880 0.5 PASS 2437 17.600 2428.200 2445.800 0.5 PASS 2462 17.600 2453.200 2470.800 0.5 PASS 11N40SISO Ant1 2422 35.760 2404.480 2440.240 0.5 PASS 2437 35.680 2419.480 2455.160 0.5 PASS 2452 36.320 2433.840 2470.160 0.5 PASS FCC ID: 2BKVL-SICW01 2 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 FCC ID: 2BKVL-SICW01 3 11G_Ant1_2412 11G_Ant1_2437 FCC ID: 2BKVL-SICW01 4 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 FCC ID: 2BKVL-SICW01 5 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 FCC ID: 2BKVL-SICW01 6 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 FCC ID: 2BKVL-SICW01 7 Appendix B.2: Occupied Channel Bandwidth Test Result TestMode Antenna Channel Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 12.569 2405.7842 2418.3532 --- --- 2437 12.510 2430.8202 2443.3302 --- --- 2462 12.459 2455.7905 2468.2495 --- --- 11G Ant1 2412 16.802 2403.6805 2420.4825 --- --- 2437 16.806 2428.6365 2445.4425 --- --- 2462 16.833 2453.5940 2470.4270 --- --- 11N20SISO Ant1 2412 17.938 2403.1008 2421.0388 --- --- 2437 17.833 2428.1118 2445.9448 --- --- 2462 17.807 2453.0913 2470.8983 --- --- 11N40SISO Ant1 2422 36.200 2404.0884 2440.2884 --- --- 2437 36.213 2419.0533 2455.2663 --- --- 2452 36.161 2433.9734 2470.1344 --- --- FCC ID: 2BKVL-SICW01 8 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 FCC ID: 2BKVL-SICW01 9 11G_Ant1_2412 11G_Ant1_2437 FCC ID: 2BKVL-SICW01 10 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 FCC ID: 2BKVL-SICW01 11 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 FCC ID: 2BKVL-SICW01 12 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 FCC ID: 2BKVL-SICW01 13 Appendix B.3: Maximum conducted output power Test Mode Antenna Frequency[MHz] Peak power [dBm] Limit [dBm] Verdict 11B Ant1 2412 16.26 ≤30.00 PASS 2437 17.43 ≤30.00 PASS 2462 18.01 ≤30.00 PASS 11G Ant1 2412 18.72 ≤30.00 PASS 2437 19.64 ≤30.00 PASS 2462 19.99 ≤30.00 PASS 11N20SISO Ant1 2412 21.12 ≤30.00 PASS 2437 22.34 ≤30.00 PASS 2462 22.42 ≤30.00 PASS 11N40SISO Ant1 2422 21.07 ≤30.00 PASS 2437 21.56 ≤30.00 PASS 2452 21.82 ≤30.00 PASS FCC ID: 2BKVL-SICW01 14 Appendix B.4: Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -9.86 ≤8.00 PASS 2437 -9.35 ≤8.00 PASS 2462 -9.05 ≤8.00 PASS 11G Ant1 2412 -13.19 ≤8.00 PASS 2437 -12.22 ≤8.00 PASS 2462 -12.12 ≤8.00 PASS 11N20SISO Ant1 2412 -10.79 ≤8.00 PASS 2437 -9.26 ≤8.00 PASS 2462 -10.08 ≤8.00 PASS 11N40SISO Ant1 2422 -14.02 ≤8.00 PASS 2437 -11.98 ≤8.00 PASS 2452 -12.56 ≤8.00 PASS Note： 1. The Duty Cycle Factor and RBW Factor is compensated in the graph. FCC ID: 2BKVL-SICW01 15 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 FCC ID: 2BKVL-SICW01 16 11G_Ant1_2412 11G_Ant1_2437 FCC ID: 2BKVL-SICW01 17 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 FCC ID: 2BKVL-SICW01 18 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 FCC ID: 2BKVL-SICW01 19 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 FCC ID: 2BKVL-SICW01 20 Appendix B.5: Band edge measurements Test Result TestMode Antenna ChName Frequency[MHz] RefLevel[dBm] Result[dBm] Limit[dBm] Verdict 11B Ant1 Low 2412 3.63 -46.85 ≤-16.37 PASS High 2462 5.38 -49.11 ≤-14.62 PASS 11G Ant1 Low 2412 -1.92 -34.34 ≤-21.92 PASS High 2462 -0.58 -48.18 ≤-20.58 PASS 11N20SISO Ant1 Low 2412 0.29 -27.99 ≤-19.71 PASS High 2462 2.13 -41.43 ≤-17.87 PASS 11N40SISO Ant1 Low 2422 -2.27 -32.86 ≤-22.27 PASS High 2452 -1.77 -36.38 ≤-21.77 PASS FCC ID: 2BKVL-SICW01 21 Test Graphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 FCC ID: 2BKVL-SICW01 22 11G_Ant1_High_2462 11N20SISO_Ant1_Low_2412 FCC ID: 2BKVL-SICW01 23 11N20SISO_Ant1_High_2462 11N40SISO_Ant1_Low_2422 11N40SISO_Ant1_High_2452 FCC ID: 2BKVL-SICW01 24 FCC ID: 2BKVL-SICW01 25 Appendix B.6: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 Reference 2.78 2.78 --- PASS 30~1000 2.78 -61.08 ≤-17.22 PASS 1000~26500 2.78 -47.85 ≤-17.22 PASS 2437 Reference 2.94 2.94 --- PASS 30~1000 2.94 -60.2 ≤-17.06 PASS 1000~26500 2.94 -46.99 ≤-17.06 PASS 2462 Reference 4.53 4.53 --- PASS 30~1000 4.53 -60.42 ≤-15.47 PASS 1000~26500 4.53 -47.1 ≤-15.47 PASS 11G Ant1 2412 Reference -2.51 -2.51 --- PASS 30~1000 -2.51 -60.46 ≤-22.51 PASS 1000~26500 -2.51 -47.24 ≤-22.51 PASS 2437 Reference -1.63 -1.63 --- PASS 30~1000 -1.63 -60.62 ≤-21.63 PASS 1000~26500 -1.63 -47.25 ≤-21.63 PASS 2462 Reference -1.21 -1.21 --- PASS 30~1000 -1.21 -60.08 ≤-21.21 PASS 1000~26500 -1.21 -47.81 ≤-21.21 PASS 11N20SISO Ant1 2412 Reference -0.34 -0.34 --- PASS 30~1000 -0.34 -60.14 ≤-20.34 PASS 1000~26500 -0.34 -47.6 ≤-20.34 PASS 2437 Reference 1.00 1.00 --- PASS 30~1000 1.00 -60.19 ≤-19 PASS 1000~26500 1.00 -47.29 ≤-19 PASS 2462 Reference 1.09 1.09 --- PASS 30~1000 1.09 -60.38 ≤-18.91 PASS 1000~26500 1.09 -47.6 ≤-18.91 PASS 11N40SISO Ant1 2422 Reference -2.87 -2.87 --- PASS 30~1000 -2.87 -60.29 ≤-22.87 PASS 1000~26500 -2.87 -47.25 ≤-22.87 PASS 2437 Reference -2.65 -2.65 --- PASS 30~1000 -2.65 -60.24 ≤-22.65 PASS 1000~26500 -2.65 -47.32 ≤-22.65 PASS 2452 Reference -2.33 -2.33 --- PASS 30~1000 -2.33 -60.25 ≤-22.33 PASS 1000~26500 -2.33 -47.27 ≤-22.33 PASS FCC ID: 2BKVL-SICW01 26 Test Graphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 FCC ID: 2BKVL-SICW01 27 11B_Ant1_2437_0~Reference 11B_Ant1…

Text truncated - open the document above for the full version.