2BKVS-EAC-VO26NoteBook bag with wireless charging pad

Accessory List Wireless Charging Laptop SleeveUSB USB Charging Cable User Manual Precautions 1.iOS and Android mobile phones with built-in native wireless charging function 2.Supports wireless charging for mobile phones, smart watches and wireless earbuds Note: All external receiving modules must comply with the WPC Qi standard for normal compatibility. 2.Plug one end of the USB cable into the power input port of the wireless charging sleeve. After power-on, the charging indicator light will flash once to signal standby readiness. Operating Instructions 1.Connect the USB charging cable to an external power adapter. 1.Keep the charger and receiving devices away from water and all other liquids. 2.Disconnect the power supply completely before cleaning the product. 3.Operating ambient temperature shall be maintained between 0°C and 45°C. 3.Place your device with wireless charging receiver onto the marked charging zone. The indicator will stay solid blue during charging; the light will turn off once the device is removed. Compatible DevicesProduct Introduction This laptop sleeve is crafted from high-quality SBR neoprene (chloroprene rubber composite fabric). The material features high elasticity, excellent shock absorption, water resistance, wear resistance and anti-deformation properties.Equipped with a built-in smart wireless charging module, this laptop sleeve boasts a minimalist design, compatible with all Qi-standard mobile phones and devices. It supports cord-free charging for convenient operation, delivering an unrestrained, safe wireless charging experience to users. Product Appearance FrontBack Slow chargingFast charging FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

KEYSTAR INDUSTRIES CO., LTD. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: July 27, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BKVS-EAC-VO26 KEYSTAR INDUSTRIES CO., LTD. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: KEYSTAR INDUSTRIES CO., LTD. FRN: 0035914605 Address: NO.2 Daling Road, Xinnan Community, Pinghu Town, Longgang District, Shenzhen City, Guangdong Province China Signature: Contact Person: Huixiang Peng Tel: 0755-86027420 Email: [email protected]

Rev 6/05/2026 KEYSTAR INDUSTRIES CO., LTD. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-27-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BKVS-EAC-VO26 [KEYSTAR INDUSTRIES CO., LTD.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [KEYSTAR INDUSTRIES CO., LTD.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Huixiang Peng Rev 6/05/2026 KEYSTAR INDUSTRIES CO., LTD. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-27-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BKVS-EAC-VO26 [KEYSTAR INDUSTRIES CO., LTD.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Huixiang Peng

KEYSTAR INDUSTRIES CO., LTD. Date: July 27, 2026 Product Model Number: EAC-VO26 KS-VO26, EAC-VO28 KS-VO28 FCC ID: 2BKVS-EAC-VO26 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature： By: Huixiang Peng Title: Manager Email: [email protected] Telephone: 0755-86027420 On behalf of: KEYSTAR INDUSTRIES CO., LTD.

KEYSTAR INDUSTRIES CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 14, 2026 Subject; Request for Confidentiality FCC ID: 2BKVS-EAC-VO26 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Huixiang Peng Title: Manager

KEYSTAR INDUSTRIES CO., LTD. Model Difference Statement DATE: June 27, 2026 FCC ID: 2BKVS-EAC-VO26 Dear Sir/Madam, Added models EAC-VO28 KS-VO28 basis of the original product EAC-VO26 KS-VO26 The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Signature： By: Huixiang Peng Title: Manager Email: [email protected] Telephone: 0755-86027420 On behalf of: KEYSTAR INDUSTRIES CO., LTD.

Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 Annex A. EUT External Photos EUT View 1 Model: EAC-VO26 KS-VO26 EUT View 2 Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 EUT View 3 EUT View 4 Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 EUT View 5 EUT View 6 Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 EUT View 7 EUT View 8

Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 Annex D. Label FCC Label Sample Label Size : 3mm*2mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 Annex B. EUT Internal Photos EUT View 1 EUT View 2 Coil ANT Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 EUT View 3 EUT View 4

Report No: SSP26060592-2H FCC Test Report Page 1 of 11 RF Exposure Report FCC ID: 2BKVS-EAC-VO26 Report No. : SSP26060592-2H Applicant : KEYSTAR INDUSTRIES CO., LTD. Product Name : NoteBook bag with wireless charging pad Model Name : EAC-VO26 KS-VO26 Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-07-06 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26060592-2H FCC Test Report Page 2 of 11 Test Report Basic Information Applicant..................................: KEYSTAR INDUSTRIES CO., LTD. Address of Applicant...............: NO.2 Daling Road, Xinnan Community, Pinghu Town, Longgang District, Shenzhen City, Guangdong Province China Manufacturer..........................: Shenzhen Luolandi Electronics Co., LTD Address of Manufacturer........: NO.2 Daling Road, Xinnan Community, Pinghu Town, Longgang District, Shenzhen City, Guangdong Province Product Name.........................: NoteBook bag with wireless charging pad Brand Name.............................: Ariel / KEYSTAR Main Model..............................: EAC-VO26 KS-VO26 Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2026-07-02 to 2026-07-04 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26060592-2H FCC Test Report Page 3 of 11 CONTENTS 1. General Information .................................................................................................................................................... 5 1.1 Product Information ............................................................................................................................................. 5 1.2 Test Setup Information .......................................................................................................................................... 6 1.3 Test Facilities ........................................................................................................................................................ 6 1.4 List of Measurement Instruments .......................................................................................................................... 7 1.5 Measurement Uncertainty ..................................................................................................................................... 7 2. RF Exposure ................................................................................................................................................................. 8 2.1 Standard and Limit................................................................................................................................................ 8 2.2 Test Procedures .................................................................................................................................................... 8 2.3 Test Data and Results ............................................................................................................................................ 9 Annex A. Test Photos ..................................................................................................................................................... 11 Report No: SSP26060592-2H FCC Test Report Page 4 of 11 Revision History Revision Issue Date Description Revised By V1.0 2026-07-06 Initial Release Lahm Peng Report No: SSP26060592-2H FCC Test Report Page 5 of 11 1. General Information 1.1 Product Information Product Name: NoteBook bag with wireless charging pad Trade Name: Ariel / KEYSTAR Model Name: EAC-VO26 KS-VO26 Series Models: EAC-VO28 KS-VO28 Rated Voltage: Input: 5V/2A, 9V/2A Wireless Output: 15W / 10W / 7.5W / 5W / 2.5W Test Sample No: SSP26060592-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: 15W / 10W / 7.5W / 5W: 110.5-205kHz, 2.5W: 310-360kHz Modulation: ASK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Report No: SSP26060592-2H FCC Test Report Page 6 of 11 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 15W 110.5-205kHz TM2 Wireless charging 10W 110.5-205kHz TM3 Wireless charging 7.5W 110.5-205kHz TM4 Wireless charging 5W 110.5-205kHz TM5 Wireless charging 2.5W 310-360kHz Note: All modes have been tested and only the worst mode TM1 and TM5 data is represented in the report. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite - - - - - - - - List and Details of Auxiliary Equipment Description Manufacturer Model Serial Number Adapter UGREEN CD289 90324 Mobile phone iPhone 16 HYG6PQMWK Apple Apple Watch Apple A2855 - 1.3 Test Facilities Laboratory Name: Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shen…

Text truncated - open the document above for the full version.

Report No: SSP26060592-1E FCC Test Report Page 1 of 30 FCC TEST REPORT FCC ID: 2BKVS-EAC-VO26 Report No. : SSP26060592-1E Applicant : KEYSTAR INDUSTRIES CO., LTD. Product Name : NoteBook bag with wireless charging pad Model Name : EAC-VO26 KS-VO26 Test Standard : FCC Part 15 Subpart C Date of Issue : 2026-07-06 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.zrlklab.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26060592-1E FCC Test Report Page 2 of 30 Test Report Basic Information Applicant..................................: KEYSTAR INDUSTRIES CO., LTD. Address of Applicant...............: NO.2 Daling Road, Xinnan Community, Pinghu Town, Longgang District, Shenzhen City, Guangdong Province China Manufacturer..........................: Shenzhen Luolandi Electronics Co., LTD Address of Manufacturer........: NO.2 Daling Road, Xinnan Community, Pinghu Town, Longgang District, Shenzhen City, Guangdong Province Product Name.........................: NoteBook bag with wireless charging pad Brand Name.............................: Ariel / KEYSTAR Model Name...........................: EAC-VO26 KS-VO26 Series Models..........................: EAC-VO28 KS-VO28 Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Date of Test .............................: 2026-07-02 to 2026-07-04 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26060592-1E FCC Test Report Page 3 of 30 CONTENTS 1. General Information .................................................................................................................................................... 5 1.1 Product Information ............................................................................................................................................. 5 1.2 Test Setup Information .......................................................................................................................................... 6 1.3 Compliance Standards ........................................................................................................................................... 7 1.4 Test Facilities ........................................................................................................................................................ 7 1.5 List of Measurement Instruments .......................................................................................................................... 8 1.6 Measurement Uncertainty ..................................................................................................................................... 8 2. Summary of Test Results ............................................................................................................................................. 9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 17 5.1 Standard and Limit.............................................................................................................................................. 17 5.2 Test Procedure.................................................................................................................................................... 17 5.3 Test Data and Results .......................................................................................................................................... 19 6. Occupied Bandwidth ................................................................................................................................................. 28 6.1 Standard and Limit.............................................................................................................................................. 28 6.2 Test Procedure.................................................................................................................................................... 28 6.3 Test Data and Results ................…

Text truncated - open the document above for the full version.

Document number Name product size A 20.5±0.5 B 39.0±1.0 C 43.5±0.5 D 35±2 E 40AX F 1.17±0.1 G 0.6±0.1 H 1.8±0.1 Φ 39.0*20.5 measurement frequency Testing method Wire material Number of turns Disk size L Coil size 100KHZ Series testing unit：MM 0.08*48 way of winding Single-line concentric winding type notice The coil is in a counterclockwise direction. 11 Ts Φ 43.5*Φ 5*0.6 6.8±10% Shenzhen Yongman Digital Co., Ltd. specification Wireless charging transmitting coil module Φ 43.5*Φ 5*H1.8 Bonding method Hot air self-adhesive

Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 Annex C. Test Photos Conducted Emission Test View 1 Conducted Emission Test View 2 Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 Radiated Emission Test View 3 Radiated Emission Test View 4 Report No: SSP26060592-1E FCC ID: 2BKVS-EAC-VO26 Radiated Emission Test View 5 Radiated Emission Test View 6