2BKVX-CR018B002BABY SWING

⪺⩸濢滺 㗐宨濢滶滵滺ē捜䃈䴸ⷩ⇰炜㧣≍既滶炜椑棬按 Best Care for Ever ! Manufacturer: Zhongshan City Cironbaby Co.,Ltd. Address: No.6,Yongxing North Road,Yongxing Industrial Zone, Henglan Town, Zhongshan City,Guangdong,China Model: CR018B User Manual Or scan the QR code below: https:www.larexcare.com larexbabycareLarex Baby CareLarex Baby Care Electric Baby Swing [email protected] For tutorial videos, customer service, extended 12-month warranty, and more information, please visit: Please scan the QR code beside: 20 Ib the product the product STOP using product when baby starts trying to sit up or has reached 20 lb, whichever comes first. s 3 not FCC compliance statement FCC Radiation Exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. 0304 1. Unfold the backrest to the same level. Connecting A with B together and installing securely. 2. Put the seat cover on the seat frame and zip up the top and bottom sections to secure it. 3. Assemble the base bracket to the touch panel base.Tighten with screws to secure. 4. Insert the seat's frame into the base support post. WARNING: After completing the installation of the seat, please check the seat to ensure that it is well locked before using it. insert the seat into the mainframe base,then rotate the seat left and right slightly,then press down the seat DIWHUDOLJQPHQWWKHQ䇡QLVKWKHVHDWLQVWDOODWLRQ Seat installation details: Keep the same direction of seat D hole and mainframe base D iron shaft,then Note: &RQQHFWRQHVLGH䇡UVWWKHQWKHRWKHUVLGH3OHDVH ensure the buttons on the back of the frame are fully closed after connecting. Assembly StepsParts Instruction Make sure that all of the following parts listed are included in the box. If any part is missing, please contact us before operating. Remote controller Adaptor*1 USB cable*1 Reversible headrest Screws*4 Screwdrivers*1 Canopy with mosquito net Touch screen panel base Reversible body pad Seat cover seat frame Base bracket A B A B Seat D hole and mainframe base D iron shaft keep the same direction 0506 7.Attach the canopy to the seat frame. Snap the two canopy brackets onto either side of the seat frame to secure. 8.Canopy installation. Secure the clamps to the tubes of the seat frame. Attach the mosquito net to the seat frame. Disassembly Steps 5.Place the reversible body pad onto the seat, then thread the harness strap through the top and bottom slot of the body pad.( The top slot has two options, you can choose one of the two. ) 6. Place the headrest onto the seat, then pull the hook-and-loop strap through the ring. Fold to secure. 1.Pull out the clasp to remove the canopy. 2.Pull the velcro to separate the headrest and thread the harness strap through the slot of the body pad to remove the body pad. 3. Push the iron sheet in and then lift the seat from the support post. 4.Find the left and right side buttons on the back of the seat frame,press GRZQ䇡UPO\RQRQHRIWKHEXWWRQV DQGSXOO䇡UPO\DZD\WKHQSUHVVWKH button on the other side and pull 䇡UPO\DZD\)ROGWKHVHDWIUDPH A B B Press 0708 1.Push the motion down to lock the seat frame to prevent the seat from moving. IMPORTANT: Always set the swing on a flat, stable surfa c e. Nev er use the seat without safely buckling your child into the harness. Using Methods 3 . Put the baby in the seat and then fasten the seat belt.Adjust the strap length if necessary. Cover the buckle bag well. Shoulder belt install details: 5.Connect the power cord to the port on the back of the display panel. Then plug the cord into an electrical outlet. NOTE: The swing does not operatHR䇠RIbatteries. The power cord is the only source of power. Only use the original adapter. If the adapter is missing please email us at [email protected] 4 . After the baby is secure, pull the motion lock up to unlock the seat frame. 0910 Control the unit's functions with the buttons indicated below: Caution: To ensure the safety of the baby, the swing amplitude and speed will slowly increase when setting the initial gear. Power Switch: Plug in and the indicator light is on. Press the button to turn the swing on/o䇠 . Timing button: Touch the button to set time to 8mins, 15mins, 30mins, or cancel. 7KHXQLWZLOOWXUQR䇠DXWRPDWLF…

Text truncated - open the document above for the full version.

2BKVX-CR018B002

2BKVX-CR018B002

2BKVX-CR018B002

2BKVX-CR018B002

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 1 of 10 Appendix External Photos for FYCR2606000160ET FCC ID: 2BKVX-CR018B002 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 2 of 10 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 3 of 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 4 of 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 5 of 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 6 of 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 7 of 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 8 of 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 9 of 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 10 of 10 - End of the Appendix -

This device complies with Part 15 of the Fcc Rules. Operation is subject to the following two conditions: this device may not cause harmful interference,and this device must accept any interference received, includinginterference that may cause undesired operation size: FCC ID: 2BKVX-CR018B002 Label Location

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 1 of 8 Appendix Internal Photos for FYCR2606000160ET FCC ID: 2BKVX-CR018B002 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 2 of 8 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 3 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 4 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 5 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 6 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 7 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 8 of 8 - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016003 Page: 1 of 10 RF EXPOSURE EVALUATION REPORT Application No.: FYCR2606000160ET Applicant: shenzhenshianxiaokejiyouxiangongsi Address of Applicant: futianqulianhuajiedaofuzhongshequjintianlu4028hao, rongchaojingmaozhongxinA309-H26, Shenzhen, Guangdong, 518000, China Manufacturer: ZHONGSHAN CITY CIRONBABY CO.,LED. Address of Manufacturer: No.6,Yongxing North Road,Yongxing Industrial Zone, HenglanTown, Zhongshan City, Guangdong, China Equipment Under Test (EUT): EUT Name: BABY SWING Model No.: CR018B Trade Mark: LAREX FCC ID: 2BKVX-CR018B002 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-06-22 Date of Evaluation: 2026-07-24 to 2026-08-02 Date of Issue: 2026-08-18 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016003 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2026-08-18 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016003 Page: 3 of 10 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 4.4 RF Exposure Test Exemptions for Simultaneous Transmission ........................................................ 9 5 Measurement and Calculation ............................................................................................................... 10 6 EUT Constructional Details (EUT Photos) ........................................................................................... 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016003 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: Input 5V via AC/DC adapter AC/DC adapter Model No.: BS05A-0501000US Input 100-240V~, 50/60Hz, 0.25A max; Output 5Vdc, 1000mA Infrared remote controller: 3Vdc via 'CR2025' cell battery Cable(s): DC output cable(adapter): 1.45m, unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.2 classic Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: PCB Antenna Antenna Gain: -0.58dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016003 Page: 5 of 10 3.4 Test Location All tests were performed at: Compliance Certification Services（Kunshan）Inc. Shenzhen branch. Fuyong lab. Xinlong TechnoPark,Fengtang Road, Fuyong Subdistrict, Bao’an, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6606.01) Compliance Certification Services（Kunshan）Inc. Shenzhen branch is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6606.01. • FCC –Designation Number: CN1322 Compliance Certification Services…

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary CEPS TNA METI TNA G4.2 emaN ledoM lacitreV latnoziroH 24 00MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 Bd85.0- niaG .XAM lacitreV dna latnoziroH noitaziraloP Azimuth Beam Pattern Omni-directional mhO 05 ecnadepmI mm02.83 htgneL annetnA Manufacture Antenna Photo & Length (mm) No.333, Kexing Road, Nanping Town, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China， Horizontal:2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical:2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs˖Attestation of Global Compliance Co., Ltd.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016002 Page: 1 of 89 TEST REPORT Application No.: FYCR2606000160ET Applicant: shenzhenshianxiaokejiyouxiangongsi Address of Applicant: futianqulianhuajiedaofuzhongshequjintianlu4028hao, rongchaojingmaozhongxinA309-H26, Shenzhen, Guangdong, 518000, China Manufacturer: ZHONGSHAN CITY CIRONBABY CO.,LED. Address of Manufacturer: No.6,Yongxing North Road,Yongxing Industrial Zone, HenglanTown, Zhongshan City, Guangdong, China Equipment Under Test (EUT): EUT Name: BABY SWING Model No.: CR018B Trade Mark: LAREX FCC ID: 2BKVX-CR018B002 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-06-22 Date of Test: 2026-07-24 to 2026-08-02 Date of Issue: 2026-08-18 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016002 Page: 2 of 89 Revision Record Version Chapter Date Modifier Remark 01 2026-08-18 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016002 Page: 3 of 89 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10- 2020+Cor.1-2023 Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10- 2020+Cor.1-2023 Section 6.10.5 & 7.8.8 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10- 2020+Cor.1-2023 Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10- 2020+Cor.1-2023 Section 6.6 & 7.8.8 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10- 2020+Cor.1-2023 Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10- 2020+Cor.1-2023 Section 6.9.2 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10- 2020+Cor.1-2023 Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10- 2020+Cor.1-2023 Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10- 2020+Cor.1-2023 Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10- 2020+Cor.1-2023 Section 7.8.7.2 47 CFR Part 15, Subpart C 15.247(d) Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016002 Page: 4 of 89 Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Spurious Emissions ANSI C63.10- 2020+Cor.1-2023 Section 7.8.7 47 CFR Part 15, Subpart C 15.247(d) Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600016002 Page: 5 of 89 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 5 4 General Information............................................................................................................................ 7 4.1 Details of E.U.T. ........................................................................................................................... 7 4.2 Description of Support Units ......................................................................................................... 7 4.3 Measurement Uncertainty ............................................................................................................ 8 4.4 Test Location ............................................................................................................................... 9 4.5 Test Facility .................................................................................................................................. 9 4.6 Deviation from Standards ............................................................................................................. 9 4.7 Abnormalities from Standard Conditions ....................................................................................... 9 5 Equipment List ..................................................................................................................................10 6 Radio Spectrum Technical Requirement ..........................................................................................13 6.1 Antenna Requirement .................................................................................................................13 6.1.1 Test Requirement: ..................................................................................................................13 6.1.2 Conclusion ..............................................................................................................................13 6.2 Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence ...............14 6.2.1 Test Requirement: ..................................................................................................................14 6.2.2 Conclusion ......................…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 1 of 3 Appendix Test Setup Photos for FYCR2606000160ET FCC ID: 2BKVX-CR018B002 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 3 of 3 Radiated Spurious Emissions Below 1GHz Radiated Spurious Emissions Above 1GHz - End of the Appendix -