2BLAY-RLIB01LOOI Robot

LOOI Robot RLIB01/User manual Cover P1 Include In The Box •Front Touch Sensor •RGB LED Bar •LED Head Lights •ToF & Obstacle Sensors •Wireless Magnetic Charging •Side Touch Sensor •Cliff Sensors P2 Specification Product Name LOOI Robot Product Model 01 Dimensions 110*98*110mm Weight 0.85lbs（385g） Charging Input 5V⎓2A/9V⎓2A Wireless Output 15W Max Battery Type Lithium Polymer Battery Battery Capacity 5000mAh Compatible OS iOS/Android Endurance 5 hours continuous use （30 days standby time） 1.Green Light: Green Light Flashing Rapidly- Charging 2.Red Light: Red Light Flashing Rapidly- Low power 3.Yellow Light: Yellow Light Flashing Rapidly- Pairing 4.White Light: White Light Flashing Rapidly- Awake 5.Cyan Light: Cyan Light Steady On - Working mode P3-P4 Quick Start Guide ① Scan the QR code with your mobile phone to download the LOOI app (Or visit www.looirobot.com/pages/app-download to download.) ② Activate the LOOI Robot: For first-time use, please connect LOOI to a power source to activate it. (Please use a 5V⎓2A/9V⎓2A USB-C charging adapter, which is not included with this product.) ③ After successfully registering and logging into your account in the LOOI app, proceed to the beginner's tutorial section. ④ Press and hold the front touchpad for 2 seconds until the yellow light flashes rapidly. Once successfully paired, start your fun journey with LOOI! P5 Fun to play with LOOI "Hey ! LOOI" LOOI is powered by cutting-edge AI with a natural language model. This smart and sassy little buddy can understand what you say and responds with its own unique flair. Eyes Wide Open With the LOOI APP, LOOI uses your phone's camera to explore and make sense of this amazing world, and most importantly, to recognize and remember you. Your Adorable Bionic Pet LOOI's rich array of expressions and actions will keep you guessing about its next move. Dive into the quirky ideas brewing in LOOI's little head! Your Desktop Buddy ￮15W wireless charging ￮Standby clock ￮Fun mini-games for health and fitness There’s a whole world of fun waiting for you to explore with LOOI ! P6-P8 CAUTION Before setting up or using the LOOI Robot, please read the following safety warnings. If this product will be used by minors, guardians should read and explain these instructions to them. Failure to do so may result in injury. In these instructions, you'll see symbols like ⚠⚠ followed by "Warning" or "Caution." These terms indicate different levels of risk as described below. Please read and understand these terms and the information that follows them before using the LOOI Robot. ⚠⚠ Warning: Indicates that improper use of the LOOI Robot may lead to serious personal injury. ⚠⚠ Caution: Indicates that improper use of the LOOI Robot may cause personal injury or damage to the device, components, or your phone. ⚠⚠ Warning - Safe Usage Not suitable for children under 3 years old. 1.The LOOI Robot is an ELECTRICALLY OPERATED PRODUCT and is not recommended for children under 8 years old. As with all ELECTRICALLY OPERATED PRODUCTS, precautions should be taken during operation and use to prevent electric shock. 2.LOOI Robot may contain small parts that could pose a choking hazard to young children. Keep these parts out of reach of young children. 3.Batteries should only be charged by adults. 4.Long cable. Strangulation hazard! 5.Do not insert fingers into gaps such as tracks or the neck to avoid pinching injuries. ⚠⚠ Warning - Battery and Wireless Charging Safety 1.The LOOI Robot contains a rechargeable lithium-ion battery. Leakage of battery contents, or combustion products of the contents, can cause personal injury and system damage. 2.If battery leakage occurs, avoid contact with skin. If contact occurs, wash thoroughly with soap and water. If battery fluid contacts your eyes, rinse immediately with water and seek medical attention. 3.To avoid battery leakage: a.Do not subject the battery to excessive physical shock, vibration, or liquid immersion. b.Do not disassemble, attempt to repair, or deform the battery. c.Do not dispose of the LOOI Robot in fire. 4.Please use an adapter with an output of 5V/2A (10W) or higher to charge the LOOI Robot. 5.Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. 6.High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F. 7.Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be. 8.When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause of concern. 9.In normal conditions, the battery performance will decline over several years. ⚠⚠ Warning - Radio Frequency Interference 1.The LOOI Robot may emit radio waves that affect the operation of nearby electronic devices, including pacemakers. 2.Do not operate the LOOI Robot within 22 centimeters of a pacemaker. 3.If you have a pacemaker or other implanted medical device, do not use the LOOI Robot without first consulting your doctor or the device manufacturer. ⚠⚠Caution - LOOI Robot Care and Maintenance 1.Do not disassemble or attempt to repair the LOOI Robot or its components, as this may cause damage. For service or repairs, contact qualified personnel. Incorrect reassembly may result in fire or injury risk. 2.Do not store the LOOI Robot in damp places, on the floor, or anywhere that might expose it to moisture, dirt, dust, lint, or other debris. 3.Avoid exposing the LOOI Robot to extreme heat or cold, and do not leave it in direct sunlight for extended periods. 4.Do not use harsh chemicals or cleaners to clean this product. 5.Do not drop, strike, or otherwise abuse…

Text truncated - open the document above for the full version.

IC:33211-RLIB01 FCC ID: 2BLAY-RLIB01 LOOI Robot Model: RLIB01 HVIN: RLIB01 FCC ID: 2BLAY-RLIB01 IC:33211-RLIB01

IC:33211-RLIB01 FCC ID: 2BLAY-RLIB01

深圳领旗电子有限公司 ShenzhenLinkQiElectronicsCo.,Ltd. 工厂地址：东莞市塘厦镇林村新太阳工业城21栋2～3楼 Email:[email protected]；电话：13554901296 1 承认书 SPECIFICATIONFORAPPROVAL 客户(Customer):可触未来 客户料号(Cust.P/N):N/A 领旗料号(LQP/N)：无线充线圈 产品描述(Descripiton):Ø20.5-0.08*24P*2P-6.3uH-9MM 日期(Date):2024/10/12 版本(Vertion):V.0 拟制 PreparedBy 审核 CheckedBy 批准 ApprovedBy 客户承认 CustomerApproval 郑少东 姚振东曹前程 2nd-3rd Floor, Building 21, New Sun Industrial City, Lin Village, Tangxia Town, Dongguan City 深圳领旗电子有限公司 ShenzhenLinkQiElectronicsCo.,Ltd. 2 变更记录 ChangeRecord 版本 Vertion 变更前 BeforeChange 变更后 AfterChange 日期 Date 备注 Remark V.0新发行2024.10.12 工厂地址：东莞市塘厦镇林村新太阳工业城21栋2～3楼 Email:[email protected]；电话：13554901296 2nd-3rd Floor, Building 21, New Sun Industrial City, Lin Village, Tangxia Town, Dongguan City 深圳领旗电子有限公司 ShenzhenLinkQiElectronicsCo.,Ltd. 3 1.机械尺寸（单位：毫米）MechanicalDimension(Unit:mm) ABCDEFGHI 20.5±0.540±1 43.5±0.59±2 3.5±1.50.65±0.051.7max 备注：1，线圈交叉出线，用高温胶纸固定； 2，线圈反贴于隔磁片上，隔磁片为铁氧体硬磁，尺寸43.5*0.65mm； 3，隔磁片背面贴普通双面胶。 工厂地址：东莞市塘厦镇林村新太阳工业城21栋2～3楼 Email:[email protected]；电话：13554901296 2nd-3rd Floor, Building 21, New Sun Industrial City, Lin Village, Tangxia Town, Dongguan City 深圳领旗电子有限公司 ShenzhenLinkQiElectronicsCo.,Ltd. 4 2.绕组结构WindingSpecification 序号 NO 端子 Terminal 线材 WIRE 圈数(TS) TURNS 绕线方向 WINDINGDIRECTION 1SF0.08*24P*2P热风线 10TS 逆时针 3.电气特性&测试条件 ElectricalRequirementsandTestCondition 温度25°C ±10% ，湿度 65±20%RH/TESTCONDITION:TEMPERATUREAT25°C±10%,HUMIDITYAT65±20%RH 序号 NO 项目 ITEM 端子 TERMINA 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1INDS-F 3.5uH±10%单独线圈 100KHZ/1VLCZMETER1062B 2INDS-F 6.3uH±10%加磁片 100KHZ/1VLCZMETER1062B 3DCRS-F ≤86 m Ω 1KHZ/1VTH2810 4.材料清单RawMaterialList 编号 NO 名称 Material 规格描述 Description 供应商 Supplier ULFILENO 1隔磁片Ø43.5*0.65mm铁氧体磁片SC/ 2线材0.08*24P*2P热风自粘线RS/ 3胶水BE885-9007BE/ 5锡无铅环保锡DB/ 6双面胶Φ42mm普通双面胶 7高温胶带7mm高温胶带/ 8包装珍珠棉+纸箱 工厂地址：东莞市塘厦镇林村新太阳工业城21栋2～3楼 Email:[email protected]；电话：13554901296 2nd-3rd Floor, Building 21, New Sun Industrial City, Lin Village, Tangxia Town, Dongguan City

TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China The size of the "F" antenna is as follows, and the maximum gain of the antenna is+3.3dB。 Figure 1 The shape of the antenna The specific parameters are as follows： 1.Frequency Band Tx:2400MHz~2480 MHz Rx:2400 MHz ~2480 MHz 2.Antenna Parameters summary(2440MHz) Table 1 Summery of the Properties of the IFA TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Figure2 XY Plane Vertical Polarization TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Figure3 XY Plane Horizontal Polarization TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Figure4 XZ Plane Vertical Polarization TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Figure5 XZ Plane Horizontal Polarization TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Figure6 YZ Plane Vertical Polarization TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Figure8 YZ Plane Horizontal Polarization TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Figure9 Measured Reflection at the Feed Point of the Antenna

Page 1 of 21 Report No.: AiTSZ-241008005FW2 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name:LOOI Robot Brand Name:N/A Model:RLIB01 Series Model:RLIW01 FCC ID:2BLAY-RLIB01 Applicant:TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Address: Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Manufacturer:TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Address: Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Standard(s):FCC CFR Title 47 Part 15 Subpart C Date of Receipt:Oct. 08, 2024 Date of Test:Oct. 09, 2024~ Oct. 29, 2024 Issued Date:Oct. 30, 2024 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 21 Report No.: AiTSZ-241008005FW2 Report Revise Record Report VersionIssued DateNotes M1Oct. 30, 2024Initial Release Page 3 of 21 Report No.: AiTSZ-241008005FW2 Contents 1TEST SUMMARY......................................................................................................................................................4 1.1TEST STANDARDS.........................................................................................................................................................4 1.2TEST SUMMARY...........................................................................................................................................................4 1.3TEST FACILITY..............................................................................................................................................................5 1.4MEASUREMENT UNCERTAINTY........................................................................................................................................5 2GENERAL INFORMATION........................................................................................................................................6 2.1ENVIRONMENTAL CONDITIONS........................................................................................................................................6 2.2GENERAL DESCRIPTION OF EUT......................................................................................................................................6 2.3DESCRIPTION OF THE TEST MODE.....................................................................................................................................7 2.4SPECIAL ACCESSORIES...................................................................................................................................................7 2.5EQUIPMENT LIST FOR THE TEST.......................................................................................................................................7 3TEST CONDITIONS AND RESULTS.............................................................................................................................9 3.1CONDUCTED EMISSIONS TEST.........................................................................................................................................9 3.2RADIATED EMISSIONS.................................................................................................................................................12 3.320DB BANDWIDTH....................................................................................................................................................18 3.4ANTENNA REQUIREMENT.............................................................................................................................................19 4TEST SETUP PHOTOGRAPHS OF EUT......................................................................................................................20 5PHOTOGRAPHS OF EUT.........................................................................................................................................21 Page 4 of 21 Report No.: AiTSZ-241008005FW2 1TEST SUMMARY 1.1Test Standards The tests were performed according to following standards: FCC Rules Part 15.207,15.209, 15.215(c) ANSI C63.10: 2013: American National Standard for Testing Unlicensed Wireless Devices 1.2Test Summary Test ItemSection in CFR 47Test Result Electric Field Radiated EmissionsFCC Part 15 C (Section15.209)PASS 20dB Bandwidth/99% BandwidthFCC Part 15 C (Section15.215(c))PASS AC Power Line Conducted EmissionFCC Part 15 C (Section15.207)PASS Antenna RequirementFCC Part 15 C (Section15.203PASS Page 5 of 21 Report No.: AiTSZ-241008005FW2 1.3Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized, certified or accredited by the following organizations: FCC-Registration No.: 251906 Designation Number: CN1376 Guangdong Asia Hongke Test Technology Limited has been registered and fully described…

Text truncated - open the document above for the full version.

Page 1 of 10 Report No.: AiTSZ-241008005FW3 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name:LOOI Robot Brand Name:N/A Model:RLIB01 Series Model:RLIW01 FCC ID:2BLAY-RLIB01 Applicant:TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Address: Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Manufacturer:TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Address: Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Standard(s): FCC CFR 47 PART 1, § 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Receipt:Oct. 08, 2024 Date of Test:Oct. 09, 2024~ Oct. 29, 2024 Issued Date:Oct. 30, 2024 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 10 Report No.: AiTSZ-241008005FW3 Report Revise Record Report VersionIssued DateNotes M1Oct. 30, 2024Initial Release Page 3 of 10 Report No.: AiTSZ-241008005FW3 Contents 1GENERAL INFORMATION........................................................................................................................................4 1.1ENVIRONMENTAL CONDITIONS........................................................................................................................................4 1.2GENERAL DESCRIPTION OF EUT......................................................................................................................................4 1.3TEST FACILITY..............................................................................................................................................................5 1.4MEASUREMENT UNCERTAINTY........................................................................................................................................5 1.5DESCRIPTION OF THE TEST MODE.....................................................................................................................................6 1.6SPECIAL ACCESSORIES...................................................................................................................................................6 1.7EQUIPMENT LIST FOR THE TEST.......................................................................................................................................6 2TEST CONDITIONS AND RESULTS.............................................................................................................................7 2.1APPLICABLE STANDARD.................................................................................................................................................7 2.2LIMIT.........................................................................................................................................................................7 2.3TEST SETUP.................................................................................................................................................................7 2.4MEASUREMENT PROCEDURE..........................................................................................................................................8 2.5TEST RESULT OF E AND H FIELD STRENGTH........................................................................................................................8 2.6EQUIPMENT APPROVAL CONSIDERATIONS.........................................................................................................................9 2.7CONCLUSION...............................................................................................................................................................9 3TEST SETUP PHOTOGRAPHS OF EUT......................................................................................................................10 Page 4 of 10 Report No.: AiTSZ-241008005FW3 1GENERAL INFORMATION 1.1Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature:25°C Relative Humidity:55 % Air Pressure:101 kPa 1.2General Description of EUT Product Name: LOOI Robot Model/Type reference: RLIB01 Serial Model: RLIW01 Power Rating: Input: 5V⎓2A/9V⎓2A DC 3.7V 5000mAh 22.20Wh Rechargeable Li-ion battery Wireless Output: 15W Max Hardware Version: N/A Software Version:N/A Sample(s) Status: AiTSZ-241008005-1(Normal sample) AiTSZ-241008005-2(Engineer sample) Wireless Charger: Operation frequency: 113kHz-205kHz Modulation Technology:ASK Antenna Type:Loop coil Antenna Antenna gain:0dBi Remark: The above DUT's information was declared by manufacturer. For more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Page 5 of 10 Report No.: AiTSZ-241008005FW3 1.3Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility …

Text truncated - open the document above for the full version.

RF Exposure evaluation FCC ID: 2BLAY-RLIB01 Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Devices 1.Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2.Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3.MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4.Antenna Information EUT can only use antennas certificated as follows provided by manufacturer; Antenna Model No. of antenna: Type of antenna:Gain of the antenna (Max.)Frequency range: BT/PCB antenna3.3dBi2400-2450MHz Manufacturing Tolerance BLE BLE GFSK Frequency (MHz) 240224402480 Target (dBm)444 Tolerance ± (dB)1.01.01.0 5.MPE Result Standalone As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is refer to section 4, the RF power density can be obtained. Output power Modulation Type dBmmW Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) BLE53.16233.32.13800.00131.0000 Remark: 1. Output power (Peak) including turn-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer. Simultaneous The EUT have two type RF transmitters, BT, and Wireless Charger, and the can transmit simultaneously, if the sum of the ratios of all individual transmitters is less than 1, the evaluation of simultaneously transmit can be exempt. ∑ MPE ratios(ratios of Wireless charger E-field (V/m) + ratios of BT)= 0.0050+0.0013=0.0063＜1.0 ∑ MPE ratios(ratios of Wireless charger H-field (A/m) + ratios of BT)= 0.3252+0.0013=0.3265＜1.0 6.Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

IC:33211-RLIB01 FCC ID: 2BLAY-RLIB01 BT Antenna IC:33211-RLIB01 FCC ID: 2BLAY-RLIB01 Coil Antenna IC:33211-RLIB01 FCC ID: 2BLAY-RLIB01

Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BLAY-RLIB01 RLIB01, RLIWO1 We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. iv. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. US-American Point of Contact Applicant/Approval Holder Signature Date: {2025/8/26} Signature Date: {2025/8/26} Company Name: Opuor INC TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. FRN: 0036496966 { FRN }0035987171 Contact Name: Shuiqing Yang Wei You Address: 6510 S Academy Blvd Ste A 642 Colorado Springs, CO 80906 United States Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Phone: (650) 315-6698 13538214502 Email: [email protected] [email protected]

IC:33211-RLIB01 FCC ID: 2BLAY-RLIB01 IC:33211-RLIB01 FCC ID: 2BLAY-RLIB01 IC:33211-RLIB01 FCC ID: 2BLAY-RLIB01

C5266091_X8_Ed.1 1/1 Letter of Authorization < TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. > Company:TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. Address:Room422, Unit1, Building17, No.4, XinzhuRoad, Songshan Lake District, Dongguan City, Guangdong Province, China Product Name:LOOI Robot Model Number: RLIB01, RLIW01 FCC Identifier:2BLAY-RLIB01 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Lixi Yan Date: 2025-9-17 Title:Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 < TangibleFuture (Dongguan) Intelligent Hardware Co.,Ltd. > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2025-09-17 Subject: Request for Confidentiality FCC ID: 2BLAY-RLIB01 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/LocationNoNo Attestation StatementNoNo External PhotosNo ☐ Block Diagram ☒☐ Schematics ☒☐ Test ReportNoNo Test Setup PhotosNo ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☒☐ RF Exposure InfoNoNo Operational Description ☒☐ Cover Letter(s)NoNo SDR Software / Security Info ☐ No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: You Wei Title: Manager

TCB CALL página 1 File FCC ID: 2BLAY-RLIB01 Please upload an exhibit that explains how does the TCB verify the new agent i…

Text truncated - open the document above for the full version.