2BLJ5-T01Short video APP controller

FCC ID LABEL: Ca. 5mm x 15mm Label Location FCC ID: 2BLJ5‐T01

FCC RF Exposure EUT Description: Short video APP controller Model No.: T01 FCC ID: 2BLJ5-T01 1. Limits According to KDB 447498 D01 General RF Exposure Guidance v06 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)]≤3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR Where: Result=P/D*√F F= the RF channel transmit frequency in GHz P= Maximum turn‐up power in mw D= Min. test separation distance in mm 2. Test Result of RF Exposure Evaluation Frequency (MHz) Output power (dBm) Tune Up Power (dBm) Max Tune Up power (dBm/mW) Min test separation distance (mm) Result Limit (mW/cm 2 ) SAR Test Exclusion 2480 -10.09 -11±1(-10)0.1 5 0.031 3.0 Pass Note: PK Output power= conducted power. Conducted power see the test report HK2409195399-E, antenna gain=2.73dBi Per KDB 447498 D01, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.031 which is ≤ 3, RF Exposure testing is not required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f (GHz)] f(GHz) is the RF channel transmit frequency in GHz Distance=5mm

UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 产品规格承认书 SPECIFICATIONS 客户: CUSTOMER: 产品名称: DESCRIPTION: 单级蓝牙天线 客户型号: CUSTOMER PART No: 产品型号: OUR MODEL NO: 3216DA01 日期: DATE: 2020/12/22 确认签字,盖章后请返回承认书一份 PLEASERETRUV TO US ONE COPY OF “SPECIFICATION FOR APPROVAL” WITY YOUR APPROVED SIGNATURES 核准审核制作 江表强 客户承认签印 日期 宋杰 高阳 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 3216DA01 Specification Operating Temp. : -40°C~+85°C 1. FEATURES : ●Light weight, compact ●Wide bandwidth, low cost ●Built-in antenna with high gain 2. APPLICATIONS : ●Bluetooth, Wireless LAN, Mobile TV ●Home RF System, etc 3. PRODUCT IDENTIFICATION (1)(2)(3) (1) Product type: Multilayer chip Antenna (2) Center Frequency: 2450MHz (3) External Dimensions (L×W) (mm): 3.2*1.6 4. SHAPE AND DIMENSIONS: LWHA 3.2±0.2 1.6±0.2 0.75±0.1 0.4±0.1 CH IP45 032 2 16 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 Test board reference size: Unit：mm UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 APPLICATION GUIDE 5. SPECIFICATIONS: No.Product number3216DA01 1Central Frequency2440MHz 2Bandwidth100 (Min.)MHz 3Return Loss-11.96 (Max.)dB 4Peak Gain2.73dBi 5Impedance50Ω 6Operating Temperature -40~+85 °C 7Maximum Power5W 8Resistance to soldering heat 10 (@260°C) Sec. 9PolarizationLinear 10Azimuth Beam widthOmni-directional 11TerminationSn (leadless) UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 6. Electrical Characteristics : UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 X-Y Plane X-Y Plane X-Y Plane UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 3D Radiation Pattern UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 7. Environmental Characteristics (1) Reliability Test (2) Storage Condition (a) At warehouse: The temperature should be within 0 ~ 30°Cand humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery. (b) On board: The temperature should be within -40~85°Cand humidity should be less than 85% RH. (3) Operating Temperature Range Operating temperature range : -40 °C to +105 °C . UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市翎坤科技有限公司 SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF LINGKUN TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 8. Recommended Reflow Soldering (1) Soldering Gun Procedure Note the follows, in case of using solder gun for replacement. (a) The tip temperature must be less than 350 ° C for the period within 3 seconds by using soldering gun under 30 W. (b) The soldering gun tip shall not touch this product directly. (2) Soldering Volume UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± …

Text truncated - open the document above for the full version.

Page 1 of 43 Report No.: HK2409195399-E FCC Test Report Test Report On Behalf of Shenzhen Keyipei trade Co., LTD For Short video APP controller Model No.: T01 FCC ID: 2BLJ5-T01 Prepared For: Shenzhen Keyipei trade Co., LTD 249C, Building 543, Bagualing Industrial Zone, Bagualing Second Road, Hualin Community, Yuanling Street, Futian District, Shenzhen, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Sept. 19, 2024 ~ Sept. 24, 2024 Date of Report: Sept. 24, 2024 Report Number: HK2409195399-E Page 2 of 43 Report No.: HK2409195399-E Test Result Certification Applicant’s Name ................... : Shenzhen Keyipei trade Co., LTD Address .................................... : 249C, Building 543, Bagualing Industrial Zone, Bagualing Second Road, Hualin Community, Yuanling Street, Futian District, Shenzhen, China Manufacturer's Name ............. : Shenzhen Anxinkang Technology Co., LTD Address .................................... : 2nd and 3rd Floor, No.82 Zhulongtian Road, Shuitian Community, Shiyan Street, Baoan District, Shenzhen, China Product Description Trade Mark ................................. : N/A Product Name ............................ : Short video APP controller Model and/or Type Reference .. : T01 Standards ................................ : 47 CFR FCC Part 15 Subpart C 15.247 KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .............................................. : Date (s) of Performance of Tests ............... : Sept. 19, 2024 ~ Sept. 24, 2024 Date of Issue ............................................. : Sept. 24, 2024 Test Result ................................................. : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 43 Report No.: HK2409195399-E Contents Page 1 Test Summary ................................................................................................................................................ 5 1.1 Test Description ......................................................................................................................................... 5 1.2 Measurement Uncertainty ......................................................................................................................... 6 1.3 Information of the Test Laboratory ............................................................................................................ 6 2 General Information ....................................................................................................................................... 7 2.1 General Description of EUT ...................................................................................................................... 7 2.2 Description of Test Conditions .................................................................................................................. 9 2.3 Description of Test Setup ........................................................................................................................ 10 2.4 Description of Support Units .................................................................................................................... 11 3 Equipments List for All Test Items ............................................................................................................. 12 4 Test Result .................................................................................................................................................... 13 4.1 Antenna Requirement.............................................................................................................................. 13 4.2 Conduction Emissions Measurement ...................................................................................................... 14 4.3 Radiated Emissions Measurement .......................................................................................................... 18 4.4 Maximum Output Power Measurement ................................................................................................... 27 4.5 Power Spectral Density ........................................................................................................................... 28 4.6 6dB Bandwidth ........................................................................................................................................ 31 4.7 Occupied Bandwidth ................................................................................................................................ 34 4.8 Band Edge ............................................................................................................................................... 35 4.9 Conducted Spurious Emissions .............................................................................................................. 37 5 Test Setup Photos ....................................................................................................................................... 41 6 Photos of the EUT ........................................................................................................................................ 43 Page 4 of 43 Report No.: HK2409195399-E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Sept. 24, 2024 Jason Zhou Page 5 of 43 Report No.: HK2409195399-E 1 Test Summary 1.1 Te…

Text truncated - open the document above for the full version.