2BM3E-GCU-R5GC Ultimate

Hand Held Legend, LLC 519 Davisville Rd,Unit 102, Willow grove, Pennsylvania PA 19090, United States Date: 2026-01-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing FCC ID: 2BM3E-GCU-R5 To Whom It May Concern: Hand Held Legend, LLC certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Hand Held Legend, LLC certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Signatory [Mitch Cairns, Engineer] Audit trail Details FILE NAME Admin_2BM3E-GCU-R5_FCCID_Attestation Statements Part 2.911(d)(5)(i) Filing 请确认根据内容勾选 对应选项.docx - 1/28/26, 11:17 PM STATUS Signed STATUS TIMESTAMP 2026/01/29 07:18:13 UTC Activity SENT [email protected] sent a signature request to: Mitchell Cairns ([email protected]) 2026/01/29 07:17:47 UTC SIGNED Signed by Mitchell Cairns ([email protected]) 2026/01/29 07:18:13 UTC COMPLETED This document has been signed by all signers and is complete 2026/01/29 07:18:13 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.

Hand Held Legend, LLC 519 Davisville Rd,Unit 102, Willow grove, Pennsylvania PA 19090, United States Date: 2026-01-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing FCC ID: 2BM3E-GCU-R5 To Whom It May Concern: Hand Held Legend, LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signatory [Mitch Cairns, Engineer] Audit trail Details FILE NAME Admin_2BM3E-GCU-R5_FCCID_Attestation Statements Part 2.911(d)(5)(ii) Filing.docx - 1/20/26, 7:00 PM STATUS Signed STATUS TIMESTAMP 2026/01/21 03:04:42 UTC Activity SENT [email protected] sent a signature request to: Mitchell Cairns ([email protected]) 2026/01/21 03:00:19 UTC SIGNED Signed by Mitchell Cairns ([email protected]) 2026/01/21 03:04:42 UTC COMPLETED This document has been signed by all signers and is complete 2026/01/21 03:04:42 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.

Hand Held Legend, LLC 519 Davisville Rd,Unit 102, Willow grove, Pennsylvania PA 19090, United States Date: 2026-01-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: 2BM3E Applicant FRN: 0036433332 Hand Held Legend, LLC certifies that, as of the date of the filing of the application, Hand Held Legend, LLC is our designated U.S. agent for service of process for the above referenced Grantee Code. Hand Held Legend, LLC accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Hand Held Legend, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced Grantee Code. Designated U.S. Agent Information: Name: Hand Held Legend, LLC U.S. Agent FRN: 0036433332 Address: 519 Davisville Rd,Unit 102, Willow grove, Pennsylvania PA 19090, United States Contact Person: Mitch Cairns Tel.: +1 4084550435 Email: [email protected] Sincerely, Hand Held Legend, LLC Hand Held Legend, LLC Mitch Cairns Mitch Cairns Signature: Signature: Rev 1/26/2023 Audit trail Details FILE NAME Admin_2BM3E-GCU-R5_FCCID_Attestation Statements US agent for service of process.docx - 1/20/26, 7:00 PM STATUS Signed STATUS TIMESTAMP 2026/01/21 03:05:01 UTC Activity SENT [email protected] sent a signature request to: Mitchell Cairns ([email protected]) 2026/01/21 03:01 UTC SIGNED Signed by Mitchell Cairns ([email protected]) 2026/01/21 03:05:01 UTC COMPLETED This document has been signed by all signers and is complete 2026/01/21 03:05:01 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.

Hand Held Legend, LLC 519 Davisville Rd,Unit 102, Willow grove, Pennsylvania PA 19090, United States Date: 2026-01-08 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BM3E-GCU-R5 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. ☒ Block Diagram ☐ Tune-Up Information ☒ Operational Description, SBOM ☐ Security Information ☒ Schematics ☐ Software Defined Radio (SDR) Information ☐ Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); ☒ External Photos ☒ Test Setup Photos ☒ Internal Photos ☒ User Manual ☐ For 45 days, pursuant to Public Notice DA 04-1705. or ☒ For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory [Mitch Cairns, Engineer] Audit trail Details FILE NAME Admin_2BM3E-GCU-R5_FCCID_ConfidentialityLetter.docx - 1/20/26, 7:01 PM STATUS Signed STATUS TIMESTAMP 2026/01/21 03:09:01 UTC Activity SENT [email protected] sent a signature request to: Mitchell Cairns ([email protected]) 2026/01/21 03:01:36 UTC SIGNED Signed by Mitchell Cairns ([email protected]) 2026/01/21 03:09:01 UTC COMPLETED This document has been signed by all signers and is complete 2026/01/21 03:09:01 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.

Hand Held Legend, LLC 519 Davisville Rd,Unit 102, Willow grove, Pennsylvania PA 19090, United States Date: 2026-01-08 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BM3E-GCU-R5 POWER OF ATTORNEY To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Hand Held Legend, LLC are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory [Mitch Cairns, Engineer] Audit trail Details FILE NAME Admin_2BM3E-GCU-R5_FCCID_PowerOfAttorney.docx - 1/20/26, 7:02 PM STATUS Signed STATUS TIMESTAMP 2026/01/21 03:09:49 UTC Activity SENT [email protected] sent a signature request to: Mitchell Cairns ([email protected]) 2026/01/21 03:03:03 UTC SIGNED Signed by Mitchell Cairns ([email protected]) 2026/01/21 03:09:49 UTC COMPLETED This document has been signed by all signers and is complete 2026/01/21 03:09:49 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.

ReferenceNo.:WTX25X10267606W001Page1of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT1-PRODUCTLABELING ProposedFCCIDLabelFormat FCCID:2BM3E-GCU-R5 Specifications:Thelabelshallbesecurelyaffixedtoapermanentlyattachedpartofthedevice,inalocation whereitisvisibleoreasilyaccessibletotheuser,andshallnotbereadilydetachable.Thelabelshallbe sufficientlydurabletoremainfullylegibleandintactonthedeviceinallnormalconditionsofusethroughout thedevice’sexpectedlifetime. ProposedLabelLocationonEUT FCCIDLabel Location

Page: 1/10 Ref : ACR.78.6.26.PAR.B Cancel and replace the report ACR.78.6.26.PAR.A WALTEK TESTING GROUP (SHENZHEN) CO., LTD 1/F., ROOM 101, BUILDING 1, HONGWEI INDUSTRIAL PARK, LIUXIAN 2ND ROAD, BLOCK 70 BAO'AN DISTRICT, SHENZHEN, GUANGDONG, 518101 CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 0725-EPGO-446 Calibrated at MVG 13 Rue du Zephyr 91140 Villejust - FRANCE Calibration date: 03/03/2026 Scope available on :https://a2la.org/ Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMO SAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 2/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Technical Manager 3/18/2026 Checked & approved by: Pedro Ruiz Technical Manager 3/18/2026 Authorized by: Christophe Barrot Quality Manager Customer Name Distribution : WALTEK TESTING GROUP (SHENZHEN) CO., LTD Issue Name Date Modifications A Pedro Ruiz 3/18/2026 Initial release B Pedro Ruiz 04/10/2026 Update customer address 
 

         

 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 3/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 4 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment ...................................................................................................... 9 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 4/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 0725-EPGO-446 Product Condition (new / used) Used Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.248 M: Dipole 2: R2= 0.216 M: Dipole 3: R3=0.231 M: 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. 3.2 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 5/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released…

Text truncated - open the document above for the full version.

WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 1 of 30 TESTREPORT ReferenceNo.......................:WTX25X10267606W004 FCCID....................................:2BM3E-GCU-R5 Applicant...............................:HandHeldLegend,LLC Address.................................: 519DavisvilleRd,Unit102,Willowgrove,PennsylvaniaPA19090,United States Manufacturer........................ShenzhenTailhooTechnologyCo.,Ltd. Address................................. Rm1503,HuaFengYouthBusinessIncubationBase,Jia’anRoad,41 DistrictofXin’an,Ban’anShenzhen. ProductName......................:GCUltimate ModelNo.. ............................. :GCU-R5 Standards..............................: FCCPart2.1093 IEEEStdC95.1:2019 IEEEC95.3:2021 IEC/IEEE62209-1528:2020 DateofReceiptsample.....: 2026-07-05 DateofTest ........................... :2026-07-05to2026-07-25 DateofIssue........................:2026-07-28 TestReportFormNo. ......... :WTX_Part2_1093W TestResult ............................ :Pass Remarks: Theresultsshowninthistestreportreferonlytothesample(s)tested,thistestreportcannotbereproduced, exceptinfull,withoutpriorwrittenpermissionofthecompany.Thereportwouldbeinvalidwithoutspecific stampoftestinstituteandthesignaturesofapprover. PreparedBy: WaltekTestingGroup(Shenzhen)Co.,Ltd. Address:1/F.,Room101,Building1,HongweiIndustrialPark,Liuxian2ndRoad, Block70Bao'anDistrict,Shenzhen,Guangdong,China Tel.:+86-755-33663308Fax.:+86-755-33663309Email:[email protected] Testedby:Approvedby: LilyYang/ProjectEngineerJasonSu/Manager ReferenceNo.:WTX25X10267606W004 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 2 of 30 TABLEOFCONTENTS 1.GeneralInformation....................................................................................................................................................4 1.1ProductDescriptionforEquipmentUnderTest(EUT).........................................................................................4 1.2TestStandards.....................................................................................................................................................5 1.3TestMethodology.................................................................................................................................................5 1.4TestFacility..........................................................................................................................................................5 2.SummaryofTestResults...........................................................................................................................................6 3.SpecificAbsorptionRate(SAR)................................................................................................................................7 3.1Introduction..........................................................................................................................................................7 3.2SARDefinition......................................................................................................................................................7 4.SARMeasurementSystem........................................................................................................................................8 4.1TheMeasurementSystem...................................................................................................................................8 4.2Probe....................................................................................................................................................................8 4.3ProbeCalibrationProcess.................................................................................................................................10 4.4Phantom.............................................................................................................................................................10 4.5DeviceHolder.....................................................................................................................................................11 4.6TestEquipmentList...........................................................................................................................................12 5.TissueSimulatingLiquids.......................................................................................................................................13 5.1CompositionofTissueSimulatingLiquid...........................................................................................................13 5.2TissueDielectricParametersforHeadandBodyPhantoms.............................................................................14 5.3TissueCalibrationResult...................................................................................................................................15 6.SARMeasurementEvaluation.................................................................................................................................16 6.1PurposeofSystemPerformanceCheck............................................................................................................16 6.2SystemSetup.....................................................................................................................................................16 6.3ValidationResults..............................................................................................................................................17 7.EUTTestingPosition................................................................................................................................................18 7.1BodyPosition.....................................................................................................................................................18 7.2EUTAntennaPosition.........................................................................................................................…

Text truncated - open the document above for the full version.

WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 1 of 66 TESTREPORT ReferenceNo.......................:WTX25X10267606W002 FCCID....................................:2BM3E-GCU-R5 Applicant...............................:HandHeldLegend,LLC Address.................................: 519DavisvilleRd,Unit102,Willowgrove,PennsylvaniaPA19090,United States Manufacturer........................:ShenzhenTailhooTechnologyCo.,Ltd. Address.................................: Rm1503,HuaFengYouthBusinessIncubationBase,Jia’anRoad,41 DistrictofXin’an,Ban’anShenzhen. ProductName ......................: GCUltimate ModelNo... ............................: GCU-R5 Standards ..............................: FCCPart15.247 DateofReceiptsample.....:2025-10-13 DateofTest ...........................: 2026-07-05to2026-07-25 DateofIssue........................:2026-07-27 TestReportFormNo. ......... : WTX_Part15_247W TestResult ............................: Pass Remarks: Theresultsshowninthistestreportreferonlytothesample(s)tested,thistestreportcannotbe reproduced,exceptinfull,withoutpriorwrittenpermissionofthecompany.Thereportwouldbeinvalidwithout specificstampoftestinstituteandthesignaturesofapprover. PreparedBy: WaltekTestingGroup(Shenzhen)Co.,Ltd. Address:1/F.,Room101,Building1,HongweiIndustrialPark,Liuxian2ndRoad, Block70Bao'anDistrict,Shenzhen,Guangdong,China Tel.:+86-755-33663308Fax.:+86-755-33663309Email:[email protected] Testedby:Approvedby: MikeShi/ProjectEngineerJasonSu/Manager ReferenceNo.:WTX25X10267606W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 2 of 66 TABLEOFCONTENTS 1.GENERALINFORMATION........................................................................................................................................4 1.1PRODUCTDESCRIPTIONFOREQUIPMENTUNDERTEST(EUT)............................................................................4 1.2TESTSTANDARDS.....................................................................................................................................................5 1.3TESTMETHODOLOGY...............................................................................................................................................5 1.4TESTFACILITY..........................................................................................................................................................5 1.5EUTSETUPANDTESTMODE.................................................................................................................................6 1.6MEASUREMENTUNCERTAINTY.................................................................................................................................7 1.7TESTEQUIPMENTLISTANDDETAILS......................................................................................................................8 2.SUMMARYOFTESTRESULTS.............................................................................................................................12 3.ANTENNAREQUIREMENT.....................................................................................................................................13 3.1STANDARDAPPLICABLE.........................................................................................................................................13 3.2EVALUATIONINFORMATION....................................................................................................................................13 4.POWERSPECTRALDENSITY...............................................................................................................................14 4.1STANDARDAPPLICABLE.........................................................................................................................................14 4.2TESTSETUPBLOCKDIAGRAM...............................................................................................................................14 4.3TESTPROCEDURE..................................................................................................................................................14 4.4SUMMARYOFTESTRESULTS/PLOTS....................................................................................................................14 5.DTSBANDWIDTH......................................................................................................................................................15 5.1STANDARDAPPLICABLE.........................................................................................................................................15 5.2TESTSETUPBLOCKDIAGRAM...............................................................................................................................15 5.3TESTPROCEDURE..................................................................................................................................................15 5.4SUMMARYOFTESTRESULTS/PLOTS....................................................................................................................15 6.RFOUTPUTPOWER................................................................................................................................................16 6.1STANDARDAPPLICABLE.........................................................................................................................................16 6.2TESTSETUPBLOCKDIAGRAM...............................................................................................................................16 6.3TESTPROCEDURE..................................................................................................................................................16 6.4SUMMARYOFTESTRESULTS/PLOTS....................................................................................................................16 7.FIELDSTRENGTHOFSPURIOUSEMISSIONS.................................................................................................17 7.1STANDARDAPPLI…

Text truncated - open the document above for the full version.

ReferenceNo.:WTX25X10267606W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 50 of 66 11G-Ant1-2412-PASS 11G-Ant1-2437-PASS 11G-Ant1-2462-PASS ReferenceNo.:WTX25X10267606W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 51 of 66 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2437-PASS 11N20SISO-Ant1-2462-PASS ReferenceNo.:WTX25X10267606W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 52 of 66 AppendixE:Bandedgemeasurements TestResult TestModeAntennaChName Frequency [MHz] RefLevel[dBm]Result[dBm]Limit[dBm]Verdict 11BAnt1Low24127.02-35.28≤-22.98PASS 11BAnt1High24626.49-43.91≤-23.51PASS 11GAnt1Low24123.66-28.75≤-26.34PASS 11GAnt1High24623.63-40.87≤-26.37PASS 11N20SISOAnt1Low24123.99-27.32≤-26.01PASS 11N20SISOAnt1High24622.97-41.87≤-27.03PASS ReferenceNo.:WTX25X10267606W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 53 of 66 TestGraphs 11B-Ant1-2412-PASS 11B-Ant1-2462-PASS 11G-Ant1-2412-PASS ReferenceNo.:WTX25X10267606W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 54 of 66 11G-Ant1-2462-PASS 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2462-PASS ReferenceNo.:WTX25X10267606W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 55 of 66 AppendixF:ConductedSpuriousEmission TestResult TestModeAntenna Frequency [MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11BAnt1241230~10007.02-48.96≤-22.98PASS 11BAnt124121000~265007.02-33.98≤-22.98PASS 11BAnt1243730~10006.87-48.48≤-23.13PASS 11BAnt124371000~265006.87-33.61≤-23.13PASS 11BAnt1246230~10006.49-49.2≤-23.51PASS 11BAnt124621000~265006.49-34.34≤-23.51PASS 11GAnt1241230~10003.66-48.85≤-26.34PASS 11GAnt124121000~265003.66-34.1≤-26.34PASS 11GAnt1243730~10002.95-49.61≤-27.05PASS 11GAnt124371000~265002.95-33.91≤-27.05PASS 11GAnt1246230~10003.63-49.29≤-26.37PASS 11GAnt124621000~265003.63-34.42≤-26.37PASS 11N20SISOAnt1241230~10002.50-49.81≤-27.5PASS 11N20SISOAnt124121000~…

Text truncated - open the document above for the full version.