2BMFN-XPROSmartphone camera grip

FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause conditions: undesired operation.

Rev1/26/2023 (YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:1/28/2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BMFN-XPRO [YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd]certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. [YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd](“theapplicant”)certifiesthattheequipmentfor whichauthorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovided byKasperskyLab,Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegrated KasperskyLab,Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuant toDA-24-886andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, AtlantisLi/Manager Rev1/26/2023 (YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:1/28/2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BMFN-XPRO [YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd](“theapplicant”)certifiesthat,asofthedateof thefilingoftheapplication,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamed entityoranyofitssubsidiariesoraffiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)AtlantisLi/Manager

YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd ‘Date：2026-1-28 ProductModelNumber:Xpro,XMax,XUltra FCCID:2BMFN-XPRO Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:AtlantisLi/Manager Email:[email protected] Telephone:13500042111 Onbehalfof:YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd

YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:January28,2026 Subject;RequestforConfidentiality FCCID:2BMFN-XPRO ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:AtlantisLi Title:Manager

YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd Date:2026-1-29 DearSir/Madam, We,YanxuanPrecisionManufacturing(Shenzhen)Co.,LtdHerebydeclaresthe,following statement Productname:Smartphonecameragrip Modelno.:Xpro,XMax,XUltra FCCID:2BMFN-XPRO Allthemodelsareelectricalidenticalincludingthesamesoftwareparameterandhardware design,samemechanicalstructureanddesign,theonlydifferenceisthemodelnamed different. Sincerely, Name/Title:AtlantisLi/Manager Company:YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd Address:2ndFloor,Building13,HengtongIndustrialZone,No.280JihuaRoad,Jihua Street,LonggangDistrict,Shenzhen Email:[email protected] Telephone:13500042111

Summary PCBAntennaSpecification ITEMANTSPEC ModelName2.4GANT Center Frequency HorizontalVertical 2400MHz 2450MHz 2500MHz2400MHz 2450MHz 2500MHz -1.26-0.76-0.58-5.25-2.46-1.86 MAX.Gain-0.58dBi PolarizationHorizontalandVertical AzimuthBeam Pattern Omni-directional Impedance50Ohm AntennaLength37.38mm AntennatypePCBAntenna ManufactureYichipMicroelectronics(Hangzhou)Co.,Ltd. Room802,BuildingA9,JiangnanElectronicValleyIndustrialPark,177Lv XueRoad,NingweiStreet,XiaoshanDistrict,HangzhouCity,Zhejiang Province TestCompanyTATechnology(Shanghai)Co.,Ltd. TestAddressBuilding1,No.400,FangchunRoad,China(Shanghai) PilotFreeTradeZone TestInstrumentKeysightE5071B AntennaPhoto&Length(mm) Horizontal:2400MHz2450MHz2500MHz Power(dBm) Max:0Min:-40Scale:5/div Frequency (MHz) Gain(dBi) MaxMinAvg 2400-1.26174-30.0801-7.18716 2450-0.765802-36.5604-7.48023 2500-0.585582-22.0315-6.59127 Vertical:2400MHz2450MHz2500MHz Power(dBm) Max:0Min:-30Scale:5/div Frequency (MHz) Gain(dBi) MaxMinAvg 2400-5.2537-22.1424-12.4294 2450-2.4652-24.5837-10.4702 2500-1.86120-29.5214-9.20432 3DRadiationPattern

AnnexA ExternalPhotos TestModelNo.:Xpro Page 1 of5 AnnexA ExternalPhotos TestModelNo.:Xpro Page 2 of5 AnnexA ExternalPhotos TestModelNo.:Xpro Page 3 of5 AnnexA ExternalPhotos TestModelNo.:Xpro Page 4 of5 AnnexA ExternalPhotos TestModelNo.:Xpro Page 5 of5

Size:10*5mm FCCID:2BMFN-XPRO

AnnexB ExternalPhotos TestModelNo.:Xpro Page 1 of2 AnnexB ExternalPhotos TestModelNo.:Xpro Page 2 of2 PCBantenna

MAXTestingCo.,Ltd.ReportNo.:MAX26010078P01-R01RF RFTESTREPORT ReportReferenceNo. ....................... :MAX26010078P01-R01RF FCCID.................................................:2BMFN-XPRO Compiledby (position+printedname+signature)..: Engineer/CindyZheng Supervisedby (position+printedname+signature)..: Manager/HaleyWen Approvedby (position+printedname+signature)..: RFManager/VivianJiang Dateofissue ......................................... :January26,2026 TestingLaboratoryName ................ : MAXLABTestingCo.,Ltd. Address.................................................: 1/F,BuildingB,XinshidaiGRPark,ShiyanStreet,Bao'anDistrict, Shenzhen,Guangdong,518052,People’sRepublicofChina Applicant’sname ............................... : YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd Address.................................................: 2ndFloor,Building13,HengtongIndustrialZone,No.280Jihua Road,JihuaStreet,LonggangDistrict,Shenzhen Testspecification..............................: Standard................................................:KDB447498D01GeneralRFExposureGuidancev06 MAXLABTestingCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe MAXLABTestingCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.MAXLABTesting Co.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthereader's interpretationofthereproducedmaterialduetoitsplacementandcontext. Testitemdescription........................: Smartphonecameragrip TradeMark............................................: N/A Manufacturer.........................................: YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd Model/Typereference ......................... : Xpro ListedModels......................................: XMax,XUltra Modulation...........................................:GFSK Frequency .............................................. From2402MHzto2480MHz Rating ..................................................... :DC3VFromBattery Result.....................................................:PASS MAXTestingCo.,Ltd.ReportNo.:MAX26010078P01-R01RF RFEXPOSUREEVALUATIONMETHOD AccordingtoKDB447498D01GeneralRFExposureGuidancev06,Unlessspecificallyrequiredbythe publishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-gextremitySARevaluation forgeneralpopulationexposureconditions,bymeasurementornumericalsimulation,isnotrequiredwhen thecorrespondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtestexclusion thresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)]·[√f (GHz) ] ≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f (GHz) istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiation asspecifiedin§1.1307(b) EUTSpecification Frequencyband(Operating)WLAN:2.412GHz~2.462GHz WLAN:5.150GHz~5.250GHz WLAN:5.725GHz~5.850GHz OthersBT:2402-2480MHz DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others Exposureclassification 3.0for1-gSARand ≤ 7.5for10-gextremitySAR AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Max.outputpower1.52dBm(0.00142W) Antennagain(Max)-0.58dBi EvaluationappliedMPEEvaluation SAREvaluation MAXTestingCo.,Ltd.ReportNo.:MAX26010078P01-R01RF RFEXPOSUREEVALUATIONMETHOD SARTestExclusionThresholdsfor100MHz–6GHzand≤50mm ApproximateSARTestExclusionPowerThresholdsatSelectedFrequenciesandTestSeparation DistancesareillustratedinthefollowingTable. The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparation distances≤50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSARand≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis ≤ 50 mmandfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmisappliedtodetermineSARtest exclusion. MAXTestingCo.,Ltd.ReportNo.:MAX26010078P01-R01RF Maximummeasuredtransmitterpower. BLE Operating Mode Freque ncy Measur ed Power max. power Antenna Gain min.test separation distance [√f(GHz)] ResultLimit (MHz)(dBm)(mW)(dBi)(mm) GFSK 24021.251.33-0.5851.5500.41333 24401.371.37-0.5851.5620.42833 24801.521.42-0.5851.5750.44693 The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparation distances≤50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparation distance,mm)]·[√f(GHz)] ThetestResultislessthan3.0for1-gSARand≤7.5for10-gextremitySAR. Conclusion:NoSARisrequired.

MAXLABTestingCo.,Ltd. ReportNo.:MAX26010078P01-R01 Page 1 of28 FCCPART15SUBPARTCTESTREPORT FCCPART15.247 ReportReferenceNo........................:MAX26010078P01-R01 FCCID. ................................................ :2BMFN-XPRO Compiledby (position+printedname+signature)..: Engineer/CindyZheng Supervisedby (position+printedname+signature) .. : Manager/HaleyWen Approvedby (position+printedname+signature)..: RFManager/VivianJiang Dateofissue ......................................... :January23,2026 TestingLaboratoryName ................ : MAXLABTestingCo.,Ltd. Address.................................................: 1/F,BuildingB,XinshidaiGRPark,ShiyanStreet,Bao'anDistrict, Shenzhen,Guangdong,518052,People’sRepublicofChina Applicant’sname ............................... : YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd Address.................................................: 2ndFloor,Building13,HengtongIndustrialZone,No.280Jihua Road,JihuaStreet,LonggangDistrict,Shenzhen Testspecification..............................: Standard................................................: FCCPart15.247 MAXLABTestingCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe MAXLABTestingCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.MAXLAB TestingCo.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthe reader'sinterpretationofthereproducedmaterialduetoitsplacementandcontext. Equipmentdescription.....................:Smartphonecameragrip TradeMark............................................: N/A Manufacturer.........................................: YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd Model/Typereference.........................: Xpro ListedModels......................................: XMax,XUltra Modulation...........................................:GFSK Frequency .............................................. From2402MHzto2480MHz Ratings...................................................:DC3Vfrombattery Result ..................................................... :PASS MAXTestingCo.,Ltd. ReportNo.:MAX26010078P01-R01 Page2of29 TESTREPORT EquipmentunderTest:Smartphonecameragrip Model/Type:Xpro ListedModels: XMax,XUltra ModelDeclaration:/ Applicant : YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd Address: 2ndFloor,Building13,HengtongIndustrialZone,No.280Jihua Road,JihuaStreet,LonggangDistrict,Shenzhen Manufacturer : YanxuanPrecisionManufacturing(Shenzhen)Co.,Ltd Address: 2ndFloor,Building13,HengtongIndustrialZone,No.280Jihua Road,JihuaStreet,LonggangDistrict,Shenzhen TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. MAXTestingCo.,Ltd. ReportNo.:MAX26010078P01-R01 Page3of29 Contents 1TESTSTANDARDS..............................................................................................................................4 2SUMMARY.................................................................................................................................................5 2.1GeneralRemarks..........................................................................................................................................5 2.2ProductDescription.....................................................................................................................................5 2.3EquipmentUnderTest.................................................................................................................................5 2.4ShortdescriptionoftheEquipmentunderTest(EUT).............................................................................5 2.5EUToperationmode.....................................................................................................................................6 2.6BlockDiagramofTestSetup.......................................................................................................................6 2.7RelatedSubmittal(s)/Grant(s)...................................................................................................................6 2.8Modifications...............................................................................................................................................6 3TESTENVIRONMENT........................................................................................................................7 3.1Addressofthetestlaboratory....................................................................................................................7 3.2TestFacility...................................................................................................................................................7 3.3Environmentalconditions............................................................................................................................7 3.4Summaryofmeasurementresults..............................................................................................................8 3.5Statementofthemeasurementuncertainty..............................................................................................8 3.6EquipmentsUsedduringtheTest..............................................................................................................9 4TESTCONDITIONSANDRESULTS.......................................................................................11 4.1ACPowerConductedEmission................................................................................................................11 4.2RadiatedEmissionsandBandEdge........................................................................................................12 4.3MaximumPeakOutputPower...................................................................................................................19 4.4PowerSpectralDensity............................................................................................…

Text truncated - open the document above for the full version.

FCCID:2BMFN-XPRO FCCID:2BMFN-XPRO