2BMHY-YVNENSN2MAXN2-Max

STYLE HUB INC. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 5 September 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing & Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:2BMHY-YVNENSN2MAX doesnotincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab, Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegratedKasperskyLab, Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuantt STYLE HUB INC. STYLE HUB INC.certifies that the equipment for which authorization is soughtis notequipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. (“the applicant”) certifies that the equipment for which authorization is sought o DA-24-886andKDB986446D01CoveredEquipmentGuidancesectionB(2a) STYLE HUB INC. certifies that, as of the date of the filing of the application, the applicantis not identified on the Covered List (as specifically named entity or any of its subsidiaries or affiliates) as an entity producing” covered equipment. Sincerely, Printedname:JenniferLeung Title:ResponsiblePerson CompanyName:StyleHubinc. Signed:

Rev1/26/2023 (STYLEHUBINC.) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:09-16-2025 Ref:AttestationStatementsPart2.911(d)(7)Filing FCCIDorGranteeCode:[2BMHY-YVNENSN2MAX] [STYLEHUBINC.](“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication,we designateourselvesastheU.S.agentforserviceofprocess. DesignatedU.S.AgentInformation: FRN:0036347490 Address:2015LincolnHighwaySuite240.Edison,NJ08817USA ContactPerson:HokKwanLeung Tel.:(190)888-0936936 Email:[email protected]

Date:5September2025 To STYLE HUB INC. :FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 To Whom It May Concern: TheSTYLE HUB INC., the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of theStyle Hub Inc.solely in matters relating to the application for an FCC equipment authorization for FCC ID:2BMHY-YVNENSN2MAX including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of theSTYLE HUB INC. TheSTYLE HUB INC also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, _______

To Date:2025-9-28 STYLE HUB INC. :FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 FCCCertificationConfidentialityReques Re:STYLE HUB INC. FCC ID:2BMHY-YVNENSN2MAX t ExhibitTypeFileName BlockDiagramBlockDiagram.pdf SchematicsSchematics.pdf OperationalDescriptio Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material.STYLE HUB INC . requests that the following documents regarding this submission for FCC ID: 2BMHY-YVNENSN2MAX be kept confidential: nOperationalDescription.pdf Andbelowexhibitkeptshort-termconfidential(180days): ExternalphotosExternalphotos.pdf Testsetupphotostestphoto.pdf InternalphotosInternalphotos.pdf UsermanualUsermanual.pdf Thosedocumentscontaindetailedsystemandequipmentdescriptionandrelated informationabouttheproductwhichStyleHubInc.considerstobeconfidential proprietary,acustomdesignand,otherwise,notreleasabletothegeneralpublic. Sincethisdesignisabasisformwhichfuturetechnologicalproductswillevolve, StyleHubInc.considersthisinformationwouldbeofbenefittoitscompetitors, andthatthedisclosureoftheinformationinthesedocumentswouldgive competitorsanunfairadvantageinthemarket. YoursSincerely,

黑白印刷 附哑膜 圆角 1. 9 cm 2.1 cm FCCID2BMHY-YVNENSN2MAX

Report No.: BL-SZ2571769-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2023-10-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Address: Equipment Type: Model Name: Brand Name: FCC ID: Test Standard: Sample Arrival Date: Test Date: Date of Issue: STYLE HUB INC. 2015 Lincoln HighwaySuite 240.Edison, NJ08817 USA N2-Max N2-Max Yvnens, Lenza, Ococo, Avura 2BMHY-YVNENSN2MAX 47 CFR Part 2.1093 KDB 447498 D04 v01 Jul. 31, 2025 Aug. 28, 2025 Sep. 01, 2025 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Xiong Lining Checked by: Xu Rui Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2571769-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2023-10-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Sep. 01, 2025Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory .............................................................................................................. 3 1.2 Test Location .................................................................................................................. 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ...................................................................................................... 4 2.2 Manufacturer Information ............................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ................................................... 4 2.4 Technical Information ..................................................................................................... 4 3 SUMMARY OF TEST RESULT ................................................................................................... 5 3.1 Test Standards ............................................................................................................... 5 4 DEVICE CATEGORY AND LEVELS LIMITS .............................................................................. 6 5 ASSESSMENT RESULT ............................................................................................................. 8 5.1 Output Power ................................................................................................................. 8 5.2 Tune-up power ............................................................................................................... 8 5.3 RF Exposure Evaluation Result ..................................................................................... 8 5.4 Conclusion ...................................................................................................................... 8 Report No.: BL-SZ2571769-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2023-10-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-SZ2571769-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2023-10-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant STYLE HUB INC. Address 2015 Lincoln HighwaySuite 240.Edison, NJ08817 USA 2.2 Manufacturer Information Manufacturer STYLE HUB INC. Address 2015 Lincoln HighwaySuite 240.Edison, NJ08817 USA 2.3 General Description for Equipment under Test (EUT) EUT Name N2-Max Model Name Under Test N2-Max Series Model Name N/A Description of Model name differentiation N/A Hardware Version N/A Software Version N/A Dimensions (Approx.) N/A Weight (Approx.) N/A 2.4 Technical Information Network and Wireless connectivity Bluetooth (BR+EDR+BLE) The requirement for the following technical information of the EUT was tested in this report: Operating Mode Bluetooth Frequency Range Bluetooth 2402 ~ 2480 MHz Antenna Type Bluetooth Ceramic Antenna Exposure Category General Population/Uncontrolled Exposure Product Type Portable Device Report No.: BL-SZ2571769-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 5 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2023-10-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 3 SUMMARY OF TEST RESULT 3.1 Test Standards No. Identity Document Title 1 47 CFR Part 2.1093 Radiofrequency radiation exposure evaluation: portable devices 2 KDB 447498 D04 v01 KDB 447498 D04 Interim Genera…

Text truncated - open the document above for the full version.

深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HT TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 产品规格承认书 SPEC IFICAT IONS 客户 : CUSTOMER: 产品名称: DESCRIPTION:双极天线 客户型号: CUSTOMERPARTNo: 产品型号: OUR MODELNO: HT-3216-C07 日期 : DATE: 确认签字,盖章后请返回承认书一份 PLEASERETURNTO US ONECOPYOF “SPECIFICATIONFORAPPROVAL” WITHYOURAPPROVEDSIGNATURES 核准审核 吴寿平 制作 钟晓鸣 客户承认签印 日期 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HT TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 HT-3216-C07 Specification OperatingTemp. : -40°C~+85°C 1. FEATURES : ●Light weight,compact ●Wide bandwidth,low cost ●Built-inantennawith high gain 2. APPLICATIONS : ●Bluetooth,WirelessLAN, MobileTV ●HomeRF System,etc 3. PRODUCTIDENTIFICATION (1)(2)(3) (1) Producttype: Multilayerchip Antenna (2) CenterFrequency: 2450MHz (3) ExternalDimensions(L ×W) (mm) : 3.2 *1. 6 4. SHAPEAND DIMENSIONS: LWHA 3.2±0.21.6±0.2 0.52 ± 0.10.4 ± 0.1 CH IP45 032 2 16 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HT TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 测试板参考尺寸： 单位：mm 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HT TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 打孔参考示意图 APPLICATIONGUIDE 5. SPECIFICATIONS: * Test condition:Test board size 90*40 mm Matchingcircuit:Pi matchingcircuit will be required 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HT TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 6. ElectricalCharacteristics: 回波损耗 驻波比 MarkFrequencyVSWR 12400MHz1.513 22440MHz1.068 32480MHz1.464 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGSAND SPECIFICATIONSARE THE PROPERTYOF PBXY TECHNOLOGYLimitedAND SHALLNOT BE REPRODUCEDOR USEDAS THE BASISFOR THE MANUFACTUREOR SALEOF APPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 RadiationPattern The Gain patternis measuredin FAR-fieldchamber.DUT is placedon the table of rotator,a standardhorn antennaand VectorNetworkAnalyzeris used to collectdata. ◎ 效率 最大增益 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HT TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 ◎3D Gain Pattern(2400 MHz) ◎3D Gain Pattern(2440 MHz) ◎3D Gain Pattern(2480 MHz) 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HT TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 7. EnvironmentalCharacteristics (1) ReliabilityTest (2) StorageCondition (a) At warehouse: The temperatureshouldbe within 0 ~ 30°Cand humidityshouldbe less than 60% RH. The productshouldbe used within 1 year from the time of delivery. (b) On board: The temperatureshouldbe within -40~85°Cand humidityshouldbe less than 85% RH. (3) OperatingTemperatureRange Operatingtemperaturerange : -40 °C to +105 °C . 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± 深圳市合拓科技有限公司 SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HT TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 8. RecommendedReflowSoldering (1) SolderingGun Procedure Note the follows,in case of using soldergun for replacement. (a) The tip temperaturemust be less than 350 ° C for the periodwithin 3 secondsby using solderinggun under 30 W. (b) The solderinggun tip shall not touch this productdirectly. (2) SolderingVolume Note that excessof solderingvolumewill easily get crack the body of this product. 深圳市合拓科技有限公司 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2571769-602 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 60 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Address: Equipment Type: Model Name: Brand Name: FCC ID: Test Standard: Sample Arrival Date: Test Date: Date of Issue: STYLE HUB INC. 2015 Lincoln HighwaySuite 240.Edison, NJ08817 USA N2-Max N2-M ax Yvnens, Lenza, Ococo, Avura 2BMHY-YVNENSN2MAX 47 CFR Part 15 Subpart C (refer to section 3.1) Jul. 31, 2025 Aug. 04, 2025 - Aug. 11, 2025 Sep. 01, 2025 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: He Yuyang Checked by: Ye Hongji Approved by: Sunny Zou (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2571769-602 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 60 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Sep. 01, 2025 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 General Description for Equipment under Test (EUT) ................................................... 5 2.4 Technical Information ..................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................. 8 3.1 Test Standards ............................................................................................................... 8 3.2 Test Verdict .................................................................................................................... 8 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 9 4.1 Test Environments ......................................................................................................... 9 4.2 Test Equipment List ........................................................................................................ 9 4.3 Test Software List ........................................................................................................... 9 4.4 Measurement Uncertainty ............................................................................................ 10 4.5 Description of Test Setup ............................................................................................. 10 4.6 Measurement Results Explanation Example ................................................................ 13 5 TEST ITEMS .............................................................................................................................. 14 5.1 Antenna Requirements ................................................................................................. 14 5.2 Output Power ............................................................................................................... 15 5.3 Occupied Bandwidth .................................................................................................... 17 5.4 Conducted Spurious Emission ..................................................................................... 18 5.5 Band Edge (Authorized-band band-edge) .................................................................... 20 Report No.: BL-SZ2571769-602 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 60 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.6 Conducted Emission .................................................................................................... 22 5.7 Radiated Spurious Emission ........................................................................................ 23 5.8 Band Edge (Restricted-band band-edge) ..................................................................... 28 5.9 Power Spectral density (PSD) ...................................................................................... 29 ANNEX A TEST RESULT ............................................................................................................. 30 A.1Output Power ............................................................................................................... 30 A.2Occupied Bandwidth .................................................................................................... 33 A.3Conducted Spurious Emissions ................................................................................... 37 A.4Band Edge (Authorized-band band-edge) .................................................................... 42 A.5Conducted Emissions ................................................................................................... 45 A.6Radiated Spurious Emission ........................................................................................ 47 A.7Band Edge (Restricted-band band-edge) ...........…

Text truncated - open the document above for the full version.