2BMMUZM0615-Channel Remote Control

01 This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the device and receiver. --Connect the device into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment FCC Warning

Z.M.C.MetalCoatingInc. (2025.11.12) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2BMMUZM061) [Z.M.C.MetalCoatingInc.](“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, (Applicantsignature) (Applicantprintedname)Lynne Z.M.C.MetalCoatingInc. (2025.11.12) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2BMMUZM061) [Z.M.C.MetalCoatingInc.](“theapplicant”)certifiesthat,asofthedateofthefilingof theapplication,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)Lynne

Z.M.C.MetalCoatingInc. AgentAuthorizationLetter 2025.11.12 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeShenzhenMostTechnologyServiceCo.,Ltd.toact onourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthe signingofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuse Actof1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Name: Lynne Position: manager CompanyName:Z.M.C.MetalCoatingInc. Address:40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Tel/Fax001-9058563838/1-9058563388 E-Mail:[email protected]

Z.M.C.MetalCoatingInc. LongTermConfidentialityRequestLetter 2025-11-12 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:CONFIDENTIALITYREQUESTFOR(FCCID:2BMMUZM061) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459of CFR47.Wehaverequestedthatthe -e.g.Blockdiagram -e.g.SCH -e.g.OperationalDescription requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublicreview. Theabovedocumentsarecompanyproprietaryinformationthatcouldnevergetinto thepossessionofyourcompetition. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Name: Lynne Position: manager CompanyName:Z.M.C.MetalCoatingInc. Address:40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Tel/Fax001-9058563838/1-9058563388 E-Mail:[email protected]

ModelNo.:ZM061-5CH FRONTVIEWOFSAMPLE BACKVIEWOFSAMPLE ModelNo.:ZM061-5CH LEFTVIEWOFSAMPLE RIGHTVIEWOFSAMPLE ModelNo.:ZM061-5CH TOPVIEWOFSAMPLE BOTTOMVIEWOFSAMPLE

ModelNo.:ZM061-5CH Page1of2 INTERNALPHOTOOFSAMPLE INTERNALPHOTOOFSAMPLE ModelNo.:ZM061-5CH Page2of2 INTERNALPHOTOOFSAMPLEPCB Antennalocation

ShenzhenMostTechnologyServiceCo.,Ltd. No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark,Nanshan, Shenzhen,Guangdong,China. TESTREPORT ReportReferenceNo........................: FCCID.................................................: MTEB25090367-H 2BMMUZM061 Compiledby (position+printedname+signature)..:FileadministratorsAlisaLuo Supervisedby (position+printedname+signature)..:TestEngineerSunnyDeng Approvedby (position+printedname+signature) .. : ManagerYvetteZhou Dateofissue ......................................... :Sep.30,2025 RepresentativeLaboratoryName . :ShenzhenMostTechnologyServiceCo.,Ltd. Address.................................................: No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark, Nanshan,Shenzhen,Guangdong,China. Applicant’sname...............................:Z.M.C.MetalCoatingInc. Address.................................................:40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Testspecification/Standard............: 47CFRPart1.1307 47CFRPart2.1093 TRFOriginator ...................................... :ShenzhenMostTechnologyServiceCo.,Ltd. ShenzhenMostTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenMostTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenMostTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription ........................ :5-ChannelRemoteControl TradeMark............................................: N/A Model/Typereference ......................... :ZM061-5CH ListedModels......................................:N/A ModulationType..................................: ASK OperationFrequency..........................: 433.92MHz Hardwareversion ................................. : V1.0 Softwareversion.................................: V1.0 Rating ..................................................... :DC3VbyBattery Result ..................................................... :PASS ReportNo.:MTEB25090367-HPage 2 of 5 TESTREPORT EquipmentunderTest:5-ChannelRemoteControl Model/Type:ZM061-5CH ListedModels: N/A RemarkN/A Applicant: Z.M.C.MetalCoatingInc. Address: 40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Manufacturer: NingboDooyaMechanic&ElectronicTechnologyCo.,Ltd Address:No.168ShengguangRoad,Luotuo,Zhenhai,Ningbo,China31 5202 TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:MTEB25090367-HPage 3 of 5 Contents 1.RevisionHistory RevisionIssueDateRevisionsRevisedBy 002025.09.30InitialIssueAlisaLuo ReportNo.:MTEB25090367-HPage 4 of 5 2.1RFExposureComplianceRequirement 2.1.1StandardRequirement AccordingtoKDB447498D01GeneralRFExposureGuidancev06 4.3.1.StandaloneSARtestexclusionconsiderations UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand 10-gextremitySARevaluationforgeneralpopulationexposureconditions,bymeasurementornumerical simulation,isnotrequiredwhenthecorrespondingSARExclusionThresholdcondition,listedbelow,is satisfied. 2.1.2Limits The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparationdistances ≤50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)]· [√f(GHz)]≤3.0for1-gSARand≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation 17 Theresultisroundedtoonedecimalplaceforcomparison Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mmand fortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtestseparation distanceis<5mm,adistanceof5mmisappliedtodetermineSARtestexclusion ReportNo.:MTEB25090367-HPage 5 of 5 2.1.3EUTRFExposure EIRP=PT*GT=(ExD)²/30 where: PT=transmitteroutputpowerinwatts, GT=numericgainofthetransmittingantenna(unitless), E=electricfieldstrengthinV/m,---10 (dBμV/m)/20) /10 6 , D=measurementdistanceinmeters(m)---3m, SoPT=(ExD)²/30/GT Theworstcase(refertoreportMTEB25090367-R)isbelow: Antennapolarization:Horizontal Frequency(MHz)Level(dBuV/m)Polarization 433.92 82.72 Peak 433.92 73.32 Average Antennapolarization:Vertical Frequency(MHz)Level(dBuV/m)Polarization 433.92 84.61 Peak 433.92 75.21 Average For433.92MHzwireless: Fieldstrength=84.61dBuV/m Antgain0dBi;soAntnumericgain=1 EIRP=PT*GT=(ExD)²/30=(10 (dBμV/m)/20) /10 6 *3) 2 /30=0.000086 SoPT=EIRP/GT=0.000086W/1=0.086mW So(0.086mW/5mm)*√0.43392GHz=0.01135 exclusion=0.01135<3.0for1-gSAR SotheSARreportisnotrequired.

ShenzhenMostTechnologyServiceCo.,Ltd. No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark,Nanshan, Shenzhen,Guangdong,China. TESTREPORT FCCRulesPart15.231 ReportReferenceNo........................: FCCID.................................................: MTEB25090367-R 2BMMUZM061 Compiledby (position+printedname+signature)..:FileadministratorsAlisaLuo Supervisedby (position+printedname+signature) .. :TestEngineerSunnyDeng Approvedby (position+printedname+signature)..: ManagerYvetteZhou Dateofissue ......................................... :Sep.30,2025 RepresentativeLaboratoryName.:ShenzhenMostTechnologyServiceCo.,Ltd. Address.................................................: No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark, Nanshan,Shenzhen,Guangdong,China. Applicant’sname ............................... :Z.M.C.MetalCoatingInc. Address ................................................. :40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Testspecification/Standard ............ : FCCPart15SubpartC,Section15.231 TRFOriginator......................................:ShenzhenMostTechnologyServiceCo.,Ltd. ShenzhenMostTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenMostTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenMostTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription........................:5-ChannelRemoteControl TradeMark ............................................ : N/A Model/Typereference ......................... :ZM061-5CH ListedModels ...................................... :N/A ModulationType..................................: ASK OperationFrequency..........................: 433.92MHz Hardwareversion ................................. : V1.0 Softwareversion ................................. : V1.0 Rating ..................................................... :DC3VbyBattery Result ..................................................... :PASS ReportNo.:MTEB25090367-RPage 2 of 24 TESTREPORT EquipmentunderTest:5-ChannelRemoteControl Model/Type:ZM061-5CH ListedModels: N/A RemarkN/A Applicant: Z.M.C.MetalCoatingInc. Address: 40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Manufacturer: NingboDooyaMechanic&ElectronicTechnologyCo.,Ltd Address:No.168ShengguangRoad,Luotuo,Zhenhai,Ningbo,China31 5202 TestResult : PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:MTEB25090367-RPage 3 of 24 Contents 1.REVISIONHISTORY.........................................................................................................................4 2.TESTSTANDARDS............................................................................................................................5 3.SUMMARY...............................................................................................................................................6 3.1.GeneralRemarks.........................................................................................................................................6 3.2.ProductDescription....................................................................................................................................6 3.3.EquipmentUnderTest................................................................................................................................6 3.4.ShortdescriptionoftheEquipmentunderTest(EUT)............................................................................6 3.5.EUToperationmode....................................................................................................................................6 3.6.BlockDiagramofTestSetup......................................................................................................................6 3.7.TestItem(EquipmentUnderTest)Description*.......................................................................................7 3.8.AuxiliaryEquipment(AE)Description.......................................................................................................7 3.9AntennaInformation*...................................................................................................................................7 3.10.EUTconfiguration......................................................................................................................................7 3.11.Modifications..............................................................................................................................................7 4.TESTENVIRONMENT.......................................................................................................................8 4.1.Addressofthetestlaboratory...................................................................................................................8 4.2.Environmentalconditions...........................................................................................................................8 4.3.TestDescription...........................................................................................................................................9 4.4.Statementofthemeasurementuncertainty.............................................................................................9 4.5.EquipmentsUsedduringtheTest...........................................................................................................10 5.TESTCONDITIONSANDRESULTS.....................................................................................11 5.1.ACPowerConductedEmission....................................................................................................11 5.2.RadiatedEmission..............................................................................…

Text truncated - open the document above for the full version.

Antennadeclaration 2025.11.12 DearEurofinsReviewer, We,Z.M.C.MetalCoatingInc.declarethatonlyradiatedmeasurements areusedtoshowcompliancewithFCClimitsforfundamentalandspurious emissions. AntennaGain:0dBi Name:Lynne Position:manager CompanyName:Z.M.C.MetalCoatingInc. Address:40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Tel/Fax001-9058563838/1-9058563388 E-Mail:[email protected]

ModelNo.:ZM061-5CH RETESTSETUP RETESTSETUP