2BMMUZM06215-Channel Remote Control

JOG UP×1JOG DOWN×1 2. DIP Switch Function Note: The factory defaults to “1” and defaults to bidirectional mode. Motor jog upMotor jog down 1. Jog / Tilt Mode Note: The JOG UP and JOG DOWN buttons only control the channel where the current remote control is located, Release the button to send code. Radio frequency: 433.05~434.79MHz Working temperature: -10~+50 Battery: 3VDC (AAA battery×2)Battery life: >2 years Radio range: 150 meters outdoor, 35 meters indoor Dimension: 144mm×45mm×14.8mm 2, If the remote control is not so sensitive or the radio range becomes shorter, pls check whether to change the battery. 4, Dispose of used batteries properly. Warning Key Symbol P2 CH-CH+UPDOWNSTOP JOG UP JOG DOWN FrontBack 1 2 Bi-directional mode Turn the dial switch to “1” Uni-directional mode Turn the dial witch to “ON” Using tools to toggle the DIP switch ON 1 ON 1 ON 1 Setting button (P2) Setting button (P2) DIP switch ZM062-15CH 15-Channel Remote Control Instruction Version: 02 Instruction of Buttons 15-Channel Remote Control Note: 1,Only the paired motor can check the battery and the current channel can only check one paired motor. 2,Only the motors which are paired by long pressing STOP button for 2S will have the battery check function. JOG DOWN×3SSTOP×1 The LCD will display the battery symbol and current battery capacity 4 S et Number of Channels Note: In the setting status, press UP or DOWN button to exit quickly. Repeat the same process if you want to adjust the Max. channels. The LCD will display the current battery capacity When the motor is charging When the motor is not charging Display “ ” 5 Battery Check Function (In bi-directional mode) 3 4 After the setting is completed, do not operate the button, the command will be sent automatically after 3S Press JOG UP or JOG DOWN button to select the desired percentage value (00~100) 6 Motor Percentage Running (In bi-directional mode) JOG UP×3S Display “ ” T<3S or STOP×1 Press CH+ or CH- button to select the desired channels (from 1 to 15) channels has been set successfully Display “ ” or (CH+ + CH-)×1 Press CH- and CH+ and hold on Display “ ” Display “ ” ++ Combo-key is locked Lock status, combo-key is invalid Release button Unlock status, combo-key is available Combo-keys unlocked Release button Press and hold STOP button more than 15s Press and hold STOP button more than 15s Display “ ” Display “ ” Display “ ” Display “ ” Note: 1,Both setting buttons (P2) can be operated. 2,The factory default is unlock status, repeat same operation to switch status circulaly. 3,Under lock status, the combo-keys don't work; Under unlock status, the combo-keys will work normally. 3 Lock / Unlock Combo-key Operation T<10S T<10S This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the device and receiver. --Connect the device into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment FCC Warning

Z.M.C.MetalCoatingInc. (2025.11.12) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2BMMUZM062) [Z.M.C.MetalCoatingInc.](“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, (Applicantsignature) (Applicantprintedname)Lynne Z.M.C.MetalCoatingInc. (2025.11.12) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2BMMUZM062) [Z.M.C.MetalCoatingInc.](“theapplicant”)certifiesthat,asofthedateofthefilingof theapplication,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)Lynne

Z.M.C.MetalCoatingInc. AgentAuthorizationLetter 2025.11.12 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeShenzhenMostTechnologyServiceCo.,Ltd.toact onourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthe signingofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuse Actof1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Name: Lynne Position: manager CompanyName:Z.M.C.MetalCoatingInc. Address:40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Tel/Fax001-9058563838/1-9058563388 E-Mail:[email protected]

Z.M.C.MetalCoatingInc. LongTermConfidentialityRequestLetter 2025-11-12 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:CONFIDENTIALITYREQUESTFOR(FCCID:2BMMUZM062) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459of CFR47.Wehaverequestedthatthe -e.g.Blockdiagram -e.g.SCH -e.g.OperationalDescription requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublicreview. Theabovedocumentsarecompanyproprietaryinformationthatcouldnevergetinto thepossessionofyourcompetition. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Name: Lynne Position: manager CompanyName:Z.M.C.MetalCoatingInc. Address:40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Tel/Fax001-9058563838/1-9058563388 E-Mail:[email protected]

ModelNo.:ZM062-15CH FRONTVIEWOFSAMPLE BACKVIEWOFSAMPLE ModelNo.:ZM062-15CH LEFTVIEWOFSAMPLE RIGHTVIEWOFSAMPLE ModelNo.:ZM062-15CH TOPVIEWOFSAMPLE BOTTOMVIEWOFSAMPLE

ModelNo.:ZM062-15CH Page1of2 INTERNALPHOTOOFSAMPLE INTERNALPHOTOOFSAMPLE ModelNo.:ZM062-15CH Page2of2 INTERNALPHOTOOFSAMPLEPCB Antennalocation

ShenzhenMostTechnologyServiceCo.,Ltd. No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark,Nanshan, Shenzhen,Guangdong,China. TESTREPORT ReportReferenceNo........................: FCCID.................................................: MTEB25090368-H 2BMMUZM062 Compiledby (position+printedname+signature)..:FileadministratorsAlisaLuo Supervisedby (position+printedname+signature)..:TestEngineerSunnyDeng Approvedby (position+printedname+signature) .. : ManagerYvetteZhou Dateofissue ......................................... :Sep.30,2025 RepresentativeLaboratoryName . :ShenzhenMostTechnologyServiceCo.,Ltd. Address.................................................: No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark, Nanshan,Shenzhen,Guangdong,China. Applicant’sname...............................:Z.M.C.MetalCoatingInc. Address.................................................:40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Testspecification/Standard............: 47CFRPart1.1307 47CFRPart2.1093 TRFOriginator ...................................... :ShenzhenMostTechnologyServiceCo.,Ltd. ShenzhenMostTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenMostTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenMostTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription ........................ :15-ChannelRemoteControl TradeMark............................................: N/A Model/Typereference ......................... :ZM062-15CH ListedModels......................................:N/A ModulationType..................................: ASK OperationFrequency..........................: 433.92MHz Hardwareversion ................................. : V1.0 Softwareversion.................................: V1.0 Rating ..................................................... :DC3VbyBattery Result ..................................................... :PASS ReportNo.:MTEB25090368-HPage 2 of 5 TESTREPORT EquipmentunderTest:15-ChannelRemoteControl Model/Type:ZM062-15CH ListedModels: N/A RemarkN/A Applicant: Z.M.C.MetalCoatingInc. Address: 40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Manufacturer: NingboDooyaMechanic&ElectronicTechnologyCo.,Ltd Address:No.168ShengguangRoad,Luotuo,Zhenhai,Ningbo,China31 5202 TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:MTEB25090368-HPage 3 of 5 Contents 1.RevisionHistory RevisionIssueDateRevisionsRevisedBy 002025.09.30InitialIssueAlisaLuo ReportNo.:MTEB25090368-HPage 4 of 5 2.1RFExposureComplianceRequirement 2.1.1StandardRequirement AccordingtoKDB447498D01GeneralRFExposureGuidancev06 4.3.1.StandaloneSARtestexclusionconsiderations UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand 10-gextremitySARevaluationforgeneralpopulationexposureconditions,bymeasurementornumerical simulation,isnotrequiredwhenthecorrespondingSARExclusionThresholdcondition,listedbelow,is satisfied. 2.1.2Limits The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparationdistances ≤50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)]· [√f(GHz)]≤3.0for1-gSARand≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation 17 Theresultisroundedtoonedecimalplaceforcomparison Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mmand fortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtestseparation distanceis<5mm,adistanceof5mmisappliedtodetermineSARtestexclusion ReportNo.:MTEB25090368-HPage 5 of 5 2.1.3EUTRFExposure EIRP=PT*GT=(ExD)²/30 where: PT=transmitteroutputpowerinwatts, GT=numericgainofthetransmittingantenna(unitless), E=electricfieldstrengthinV/m,---10 (dBμV/m)/20) /10 6 , D=measurementdistanceinmeters(m)---3m, SoPT=(ExD)²/30/GT Theworstcase(refertoreportMTEB25090368-R)isbelow: Antennapolarization:Horizontal Frequency(MHz)Level(dBuV/m)Polarization 433.92 84.45 Peak 433.92 74.99 Average Antennapolarization:Vertical Frequency(MHz)Level(dBuV/m)Polarization 433.92 85.67 Peak 433.92 76.21 Average For433.92MHzwireless: Fieldstrength=85.67dBuV/m Antgain0dBi;soAntnumericgain=1 EIRP=PT*GT=(ExD)²/30=(10 (dBμV/m)/20) /10 6 *3) 2 /30=0.000108 SoPT=EIRP/GT=0.000108W/1=0.108mW So(0.108mW/5mm)*√0.43392GHz=0.01425 exclusion=0.01425<3.0for1-gSAR SotheSARreportisnotrequired.

ShenzhenMostTechnologyServiceCo.,Ltd. No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark,Nanshan, Shenzhen,Guangdong,China. TESTREPORT FCCRulesPart15.231 ReportReferenceNo........................: FCCID.................................................: MTEB25090368-R 2BMMUZM062 Compiledby (position+printedname+signature)..:FileadministratorsAlisaLuo Supervisedby (position+printedname+signature) .. :TestEngineerSunnyDeng Approvedby (position+printedname+signature)..: ManagerYvetteZhou Dateofissue ......................................... :Sep.30,2025 RepresentativeLaboratoryName.:ShenzhenMostTechnologyServiceCo.,Ltd. Address.................................................: No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark, Nanshan,Shenzhen,Guangdong,China. Applicant’sname ............................... :Z.M.C.MetalCoatingInc. Address ................................................. :40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Testspecification/Standard ............ : FCCPart15SubpartC,Section15.231 TRFOriginator......................................:ShenzhenMostTechnologyServiceCo.,Ltd. ShenzhenMostTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenMostTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenMostTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription........................:15-ChannelRemoteControl TradeMark ............................................ : N/A Model/Typereference ......................... :ZM062-15CH ListedModels ...................................... :N/A ModulationType..................................: ASK OperationFrequency..........................: 433.92MHz Hardwareversion ................................. : V1.0 Softwareversion ................................. : V1.0 Rating ..................................................... :DC3VbyBattery Result ..................................................... :PASS ReportNo.:MTEB25090368-RPage 2 of 24 TESTREPORT EquipmentunderTest:15-ChannelRemoteControl Model/Type:ZM062-15CH ListedModels: N/A RemarkN/A Applicant: Z.M.C.MetalCoatingInc. Address: 40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Manufacturer: NingboDooyaMechanic&ElectronicTechnologyCo.,Ltd Address:No.168ShengguangRoad,Luotuo,Zhenhai,Ningbo,China31 5202 TestResult : PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:MTEB25090368-RPage 3 of 24 Contents 1.REVISIONHISTORY.........................................................................................................................4 2.TESTSTANDARDS............................................................................................................................5 3.SUMMARY...............................................................................................................................................6 3.1.GeneralRemarks.........................................................................................................................................6 3.2.ProductDescription....................................................................................................................................6 3.3.EquipmentUnderTest................................................................................................................................6 3.4.ShortdescriptionoftheEquipmentunderTest(EUT)............................................................................6 3.5.EUToperationmode....................................................................................................................................6 3.6.BlockDiagramofTestSetup......................................................................................................................6 3.7.TestItem(EquipmentUnderTest)Description*.......................................................................................7 3.8.AuxiliaryEquipment(AE)Description.......................................................................................................7 3.9AntennaInformation*...................................................................................................................................7 3.10.EUTconfiguration......................................................................................................................................7 3.11.Modifications..............................................................................................................................................7 4.TESTENVIRONMENT.......................................................................................................................8 4.1.Addressofthetestlaboratory...................................................................................................................8 4.2.Environmentalconditions...........................................................................................................................8 4.3.TestDescription...........................................................................................................................................9 4.4.Statementofthemeasurementuncertainty.............................................................................................9 4.5.EquipmentsUsedduringtheTest...........................................................................................................10 5.TESTCONDITIONSANDRESULTS.....................................................................................11 5.1.ACPowerConductedEmission....................................................................................................11 5.2.RadiatedEmission..........................................................................…

Text truncated - open the document above for the full version.

Antennadeclaration 2025.11.12 DearEurofinsReviewer, We,Z.M.C.MetalCoatingInc.declarethatonlyradiatedmeasurements areusedtoshowcompliancewithFCClimitsforfundamentalandspurious emissions. AntennaGain:0dBi Name:Lynne Position:manager CompanyName:Z.M.C.MetalCoatingInc. Address:40GaudaurRoad,Woodbridge,OntarioL4L4S6,Canada Tel/Fax001-9058563838/1-9058563388 E-Mail:[email protected]

ModelNo.:ZM062-15CH RETESTSETUP RETESTSETUP