2BMSO-N101Wireless Gateway

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Yuanjing intelligent Technology Co., LTD Grantee code: 2BMSO-N101 FCC ID: 2BMSO-N101 FRN:0036409027 Contact Name: Xiaolin Zhang Address: 18th Floor, Tower C, Coolpad Building, Keyuan Ave & BaoshenRd, Shenzhen, Guangdong, China Telephone No: +86 19925189055 Fax No: Email: [email protected] i. [Shenzhen Yuanjing intelligent Technology Co., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Yuanjing intelligent Technology Co., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Yuanjing intelligent Technology Co., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026, May.16 Applicant’s Name: Xiaolin Zhang Title: Certification Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Yuanjing intelligent Technology Co., LTD Code 00018768 Ed. 1 Device Wireless Gateway Company name Shenzhen Yuanjing intelligent Technology Co., LTD Grantee code 2BMSO FCC ID 2BMSO-N101 FRN 0036409027 Contact name Xiaolin Zhang Address 18th Floor, Tower C, Coolpad Building, Keyuan Ave & Baoshen Rd, Shenzhen, Guangdong, China Telephone number +86 19925189055 E-mail [email protected] Chipset/module information TXW8301, TXW817-824F Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A 3 # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; N/A 4 ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Xiaolin Zhang Date: 2026-05-25 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

NINGBOBAINIANELECTRICAPPLIANCECO.,LTD. No.458Binhai3rdRoad,CixiCity,Ningbo,ZhejiangProvince,China Date:2025-05-29 FCC:2ATL2T12VTX08 IC:25145-T12VTX08 DearSir/Madam, We,NINGBOBAINIANELECTRICAPPLIANCECO.,LTD.Herebydeclaresthefollowingstatementfor Innovation,ScienceandEconomicDevelopmentforthemodels/HVINsmentionedasbelow: Productname:RemoteControl Models:BN-TX07,BN-TX08-7,BN-TX08-330 HVINS:BN-TX07,BN-TX08-7,BN-TX08-330 1）,HVINsBN-TX08-7,BN-TX08-330 Thetwomodelsshareidenticalelectricalparameters,RFperformance,chipset,andworkingprinciple.Theonly differenceliesinthenumberofbuttonsontheexterior. BN-TX08-7BN-TX08-330 2）,HVINsBN-TX07,BN-TX08-7,BN-TX08-330 Thethreemodelsshareidenticalelectricalparameters,RFperformance,chipset,andworkingprinciple.The differenceliesinthePCBlayout&PCBsize,andhousingstructure. ModelHVINExternalphotodifference BN-TX07BN-TX07 NINGBOBAINIANELECTRICAPPLIANCECO.,LTD. No.458Binhai3rdRoad,CixiCity,Ningbo,ZhejiangProvince,China BN-TX08-7BN-TX08-7 BN-TX08-330BN-TX08-330 ThenumberofconductiverubbercontactsonthePCBisdifferent.Thenumberofrubberkeysisdifferent. AccordingtoRSP-100issue12Clause9.3(a)andClause9.3(c),werequesttocertifytheseHVINsunderthe NewFamilyProductCertification. Sincerely, (Signed) Name/Title:sunjianli/ForeignEntity Company:NINGBOBAINIANELECTRICAPPLIANCECO.,LTD. Address:No.458Binhai3rdRoad,CixiCity,Ningbo,ZhejiangProvince,China Phone:+8617131620397 Fax:+8657463027205 E-Mail:sjl.bndg(ochinatimer.com

TCB CALL página 1 File FCC ID: 2BMSO-N101 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://bizfileonline.sos.ca.gov/search/business TCB CALL página 2 In google: TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "2BMSO-N101 US AGENT" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "2BMSO-N101 US AGENT" >

C5266091_X10_Ed.2 1/1 < Shenzhen Yuanjing intelligent Technology Co., LTD> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: May 25, 2026 Subject: Request for Confidentiality FCC ID: 2BMSO- N101 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☒ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ___180___ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Xiaolin Zhang Title: Certification Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization < Shenzhen Yuanjing intelligent Technology Co., LTD > Company: Shenzhen Yuanjing intelligent Technology Co., LTD Address: 18th Floor, Tower C, Coolpad Building, Keyuan Ave & BaoshenRd, Shenzhen, Guangdong, China Product Name: Wireless Gateway Model Number: N101 FCC Identifier:2BMSO- N101 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xiaolin Zhang Date: May 25, 2026 Title: Certification Manager Signature of applicant:

Label Location

FCC ID: 2BMSO-N101 RF Exposure Evaluation Standard CFR 47 Part 2.1091(c) KDB 447498 D01 V06 Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1310 Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. FCC RF Exposure Exemption Criteria Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. According to KDB447498 General RF Exposure Guidance V06 Section 7.2 to test details are as follows Test Result of RF Exposure Evaluation Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result WIFI 802.11 ah 26.95 495.45 0.16627 0.6 PASS WIFI 2.4G 18.78 75.51 0.04044 1.0 PASS Remark: 1.antenna gain=2.27dBi for 802.11 ah Halow WIFI,antenna gain=4.3dBi for 802.11 b/g/n WIFI2.4G 2.Simultaneously transmitting methods and limit for details, see Section 7.2 b),limit=1 3.Simultaneously transmitting mode MaxPd(WIFI) =(0.16627/0.6) +(0.04044/1) =0.31756,Pd1≤1,Result pass.

Project No.: ZKT-260313L2585E-2 Page 1 of 67 FCC TEST REPORT FCC ID:2BMSO-N101 Report Number. .............................. : ZKT-260313L2585E-2 Date of Test ................................................. : Mar.03, 2026 to Jun.24, 2026 Date of issue .................................... : Jun.24, 2026 Total number of pages ...................... 67 Test Result ....................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : Shenzhen Yuanjing intelligent Technology Co., LTD Address .......................................... : 18th Floor, Tower C, Coolpad Building, Keyuan Ave & Baoshen Rd, Shenzhen, Guangdong, China Manufacturer's name ................... : Shenzhen Yuanjing intelligent Technology Co., LTD Address .......................................... : 18th Floor, Tower C, Coolpad Building, Keyuan Ave & Baoshen Rd, Shenzhen, Guangdong, China Test specification: Standard .......................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10-2020+Cor. 1-2023 Test procedure ................................. : / Non-standard test method ............. : N/A Test Report Form No. .................... : TRF-EL-110_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Wireless Gateway Trademark ...................................... : LOPKIN Model/Type reference ...................... : N101 Ratings ............................................. : AC Input 100-240VAC, 50/60Hz Project No.: ZKT-260313L2585E-2 Page 2 of 67 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim.Liu Tested by (name + signature) .................... : Jackson.Fang Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-260313L2585E-2 Page 3 of 67 Table of Contents Page 1. VERSION 5 2. SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3. GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 3.4 DESCRIPTION OF SUPPORT UNITS (CONDUCTED MODE) 10 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 11 4. EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 TEST PROCEDURE 13 4.1.3 DEVIATION FROM TEST STANDARD 13 4.1.4 TEST SETUP 14 4.1.5 EUT OPERATING CONDITIONS 14 4.1.6 TEST RESULT 15 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 TEST PROCEDURE 18 4.2.3 DEVIATION FROM TEST STANDARD 18 4.2.4 TEST SETUP 18 4.2.5 EUT OPERATING CONDITIONS 19 4.2.6 TEST RESULTS 19 5.RADIATED BAND EMISSIONMEASUREMENT 30 5.1 TEST REQUIREMENT: 30 5.2 TEST PROCEDURE 30 5.3 DEVIATION FROM TEST STANDARD 30 5.4 TEST SETUP 31 5.5 EUT OPERATING CONDITIONS 31 6.POWER SPECTRAL DENSITY TEST 36 6.1 APPLIED PROCEDURES / LIMIT 36 6.2 TEST PROCEDURE 36 6.3 DEVIATION FROM STANDARD 36 6.4 TEST SETUP 36 6.5 EUT OPERATION CONDITIONS 36 6.6 TEST RESULT 37 Project No.: ZKT-260313L2585E-2 Page 4 of 67 7. CHANNEL BANDWIDTH & 99% OCCUPY BANDWIDTH 41 7.1 APPLIED PROCEDURES / LIMIT 41 7.2 TEST PROCEDURE 41 7.3 DEVIATION FROM STANDARD 42 7.4 TEST SETUP 42 7.5 EUT OPERATION CONDITIONS 42 7.6 TEST RESULT 43 8.PEAK OUTPUT POWER TEST 50 8.1 APPLIED PROCEDURES/LIMIT 50 8.2 TEST PROCEDURE 50 8.3 DEVIATION FROM STANDARD 50 8.4 TEST SETUP 50 8.5 EUT OPERATION CONDITIONS 50 8.6 TEST RESULT 51 9. CONDUCTED BAND EDGE AND SPURIOUS EMISSION 52 9.1 APPLICABLE STANDARD 52 9.2 TEST PROCEDURE 52 9.3 DEVIATION FROM STANDARD 52 9.4 TEST SETUP 52 9.5 EUT OPERATION CONDITIONS 52 9.6 TEST RESULTS 52 10. DUTY CYCLE 64 10.1 APPLIED PROCEDURES / LIMIT 64 10.2 DEVIATION FROM STANDARD 64 10.3 TEST SETUP 64 10.4 TEST RESULTS 65 11. ANTENNA REQUIREMENT 66 12. TEST SETUP PHOTO 67 13. EUT CONSTRUCTIONAL DETAILS 67 Project No.: ZKT-260313L2585E-2 Page 5 of 67 1. VERSION Report No. Version Description Approved ZKT-260313L2585E-2 Rev.01 Initial issue of report Jun 24, 2026 Project No.: ZKT-260313L2585E-2 Page 6 of 67 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247), Subpart C Standard Section Test Item Result Remark FCC part 15.203/15.247 (c) Antenna requirement PASS FCC part 15.207 AC Power Line Conducted Emission PASS FCC part 15.247 (b)(3) Conducted Peak Output Power PASS FCC part 15.247 (a)(2) Channel Bandwidth& 99% OCB PASS FCC part 15.247 (e) Power Spectral Density PASS FCC part 15.247(d) Band Edge PASS FCC part 15.205/15.209 Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Project No.: ZKT-260313L2585E-2 Page 7 of 67 2.1 TEST FACILITY Shenzhen ZKT Technology Co., Ltd. Add.: 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China FCC Test Firm Registration Number: 692225 Designation Number: CN1299 IC Registered No.: 27033 CAB identifier: CN0110 2.2 MEASUREMENT UNCERTAINTY …

Text truncated - open the document above for the full version.

CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 1 SMD Antenna Specification Document CrossAir TM SMDAntenna Series Complies with RoHS standards PN:CA-C03 2.4GHzISMBand Antenna CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 2 Features 1. Size only 5.5X2.0X1.0mm 3 for a small size SMD Patch Antenna . 2. Low energy loss, high antenna efficiency. 3. High stability under temperature and humidity variations. Applications 1.2.4GHzISM Band Antenna Applications 2. Bluetooth, ZigBee, Wireless Applications, Smart Home Applications, etc. 3.WIFI (only 2. 4G) Structure 1Antenna Feed Point 2Feed Identification Mark 3Antenna Soldering Fixing Point Dimensions Three Views Symbols Dimensions(mm) L5.5±0.2 w2.0±0.1 T1.0±0.1 a0.5±0.1 CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 3 Electrical Characteristics CA-C03Specification Operating Frequency RangeWorkingFrequency2450±50MHz BandwidthBandWidth >100MHz ImpedanceImpedance50Ω GainGain(dBi)4.3（peak） Voltage Standing Wave RatioVSWR <2 Operating TemperatureOperationTemperature-40°C~+95°C Power CapacityPowerCapacity 3W Antenna2.4GThe operating frequency needs to be adjusted through impedance matching devices. Antenna Pad and Trace Design PCBSchematic Diagram Design Dimension Diagram RF Signal CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 4 Matching Component Value Series ComponentSeries1Resistor0Ω Shunt ComponentShunt1High-Frequency Inductor3nh Series ComponentSeries2 Resistor 0 Ω CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 5 Antenna Testing on Test Board(Board Thickness1.0mm) AntennaS11Characteristics AntennaVSWRCharacteristics CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 6 Efficiency and Radiation Pattern Performance metrics such as efficiency, radiation pattern, and gain are based on the design of the test board.CA-C03 The specification characteristic test data of the antenna is based on the test PCBboard dimensions and the test direc- tions shown in the figure below. The following data was completed in the ETS3D microwave anechoic chamber. Gain and Efficiency Bandwidth 2.4G-2.5GHz Peak GainPeakGain 4.3dBi In-Band Average Gain AverageGainacrosstheband 4.1dBi In-Band Gain Range GainRangeacrosstheband 3.9dBi~4.3dBi Peak EfficiencyPeakEfficiency 81.7% In-Band Average Efficiency AverageEfficiencyacrosstheband 80.2% In-Band Efficiency Range EfficiencyRangeacrosstheband 78.6%~81.7% Z Y X CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 7 Theta @2.45 GHz Phi @2.45 GHz Total @2.45 GHz CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 8 3D Total @2.45 GHz Soldering Conditions The typical soldering specifications for reliable and damage-free soldering are shown in the figure below: CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 9 Packaging Plastic Carrier Tape Specifications ( Unit :mm) IndexAoBo ΦD TW Dimension(mm) 3.0±0.16.0±0.11.55±0.051.6±0.116±0.2 IndexEFPoP1P2 Dimension(mm) 1.75 ± 0.17.0 ± 0.14.0 ± 0.14.0 ± 0.12.0 ± 0.1 Reel Size IndexABC Dimension(mm)33010013.5 Standard Quantity: 3000PCS/Reel. Storage Environment The product should meet the following conditions during storage: Temperature :-10°C~+40°C CA-C03Specification DocumentGuangzhou Hanwuji Electronics Technology Co., Ltd. CA-C03_V02 10 Humidity :30% to 70% relative humidity The product placement should not come into contact with corrosive gases, such as sulfur. Chlorine or acids may cause oxidation of the product electrodes, resulting in poor solderability. The product should be placed in a toolbox and protected from moisture and dust. The product should be stored in a warehouse and protected from heat, vibration, and direct sunlight. The product should be stored under sealed conditions. Manufacturer Information: Guangzhou Hanwuji Electronics Technology Co., Ltd. Address: Hongda Creative Park, Yuanxiang Road, Yunpu Street, Huangpu District, Guangzhou City, Guangdong Province Building 1 Floor 11 Room 1119 Website: www.gzhwjdz.com

Project No.: ZKT-260313L2585E-1 Page 1 of 60 FCC TEST REPORT FCC ID:2BMSO-N101 Report Number. ................................ : ZKT-260313L2585E-1 Date of Test ................................................. : Apr.08, 2026 to Jun.24, 2026 Date of issue .................................... : Jun.24, 2026 Total number of pages ...................... 60 Test Result ..................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : Shenzhen Yuanjing intelligent Technology Co., LTD Address .......................................... : 18th Floor, Tower C, Coolpad Building, Keyuan Ave & Baoshen Rd, Shenzhen, Guangdong, China Manufacturer's name ................... : Shenzhen Yuanjing intelligent Technology Co., LTD Address .......................................... : 18th Floor, Tower C, Coolpad Building, Keyuan Ave & Baoshen Rd, Shenzhen, Guangdong, China Test specification: Standard ........................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10-2020+Cor. 1-2023 Test procedure ................................. : / Non-standard test method ............. : N/A Test Report Form No. .................... : TRF-EL-112_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Wireless Gateway Trademark ...................................... : LOPKIN Model/Type reference......................: N101 Ratings ............................................. : AC Input 100-240VAC, 50/60Hz Project No.: ZKT-260313L2585E-1 Page 2 of 60 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Tom Zou Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-260313L2585E-1 Page 3 of 60 Table of Contents Page 1.VERSION 5 2. SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3. GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 3.4 DESCRIPTION OF SUPPORT UNITS (CONDUCTED MODE) 10 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 11 4. EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 TEST PROCEDURE 13 4.1.3 DEVIATION FROM TEST STANDARD 13 4.1.4 TEST SETUP 14 4.1.5 EUT OPERATING CONDITIONS 14 4.1.6 TEST RESULT 15 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 TEST PROCEDURE 18 4.2.3 DEVIATION FROM TEST STANDARD 18 4.2.4 TEST SETUP 18 4.2.5 EUT OPERATING CONDITIONS 19 5.RADIATED BAND EMISSION MEASUREMENT 28 5.1 TEST REQUIREMENT: 28 5.2 TEST PROCEDURE 28 5.3 DEVIATION FROM TEST STANDARD 28 5.4 TEST SETUP 29 5.5 EUT OPERATING CONDITIONS 29 5.6 TEST RESULT 30 6.POWER SPECTRAL DENSITY TEST 34 6.1 APPLIED PROCEDURES / LIMIT 34 6.2 TEST PROCEDURE 34 6.3 DEVIATION FROM STANDARD 34 6.4 TEST SETUP 34 Project No.: ZKT-260313L2585E-1 Page 4 of 60 Table of Contents Page 6.5 EUT OPERATION CONDITIONS 34 6.6 TEST RESULT 35 7. CHANNEL BANDWIDTH & 99% OCCUPY BANWIDTH 38 7.1 APPLIED PROCEDURES / LIMIT 38 7.2 TEST PROCEDURE 38 7.3 DEVIATION FROM STANDARD 39 7.4 TEST SETUP 39 7.5 EUT OPERATION CONDITIONS 39 7.6 TEST RESULT 40 8.PEAK OUTPUT POWER TEST 46 8.1 APPLIED PROCEDURES / LIMIT 46 8.2 TEST PROCEDURE 46 8.3 DEVIATION FROM STANDARD 46 8.4 TEST SETUP 46 8.5 EUT OPERATION CONDITIONS 46 8.6 TEST RESULT 47 9.1 APPLICABLE STANDARD 48 9.2 TEST PROCEDURE 48 9.3 DEVIATION FROM STANDARD 48 9.4 TEST SETUP 48 9.5 EUT OPERATION CONDITIONS 48 10.1 APPLIED PROCEDURES / LIMIT 57 10.2 DEVIATION FROM STANDARD 57 10.3 TEST SETUP 57 10.4 TEST RESULTS 58 11. ANTENNA REQUIREMENT 59 12. TEST SETUP PHOTO 60 13. EUT CONSTRUCTIONAL DETAILS 60 Project No.: ZKT-260313L2585E-1 Page 5 of 60 1.VERSION Report No. Version Description Approved ZKT-260313L2585E-1 Rev.01 Initial issue of report Jun.24, 2026 Project No.: ZKT-260313L2585E-1 Page 6 of 60 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247), Subpart C Standard Section Test Item Judgment Remark FCC part 15.203/15.247 (c) Antenna requirement PASS FCC part 15.207 AC Power Line Conducted Emission PASS FCC part 15.247 (b)(3) Conducted Peak Output Power PASS FCC part 15.247 (a)(2) Channel Bandwidth& 99% OCB PASS FCC part 15.247 (e) Power Spectral Density PASS FCC part 15.247(d) Band Edge PASS FCC part 15.205/15.209 Spurious Emission PASS NOTE: (1) “N/A” denotes test is not applicable in this Test Report Project No.: ZKT-260313L2585E-1 Page 7 of 60 2.1 TEST FACILITY Shenzhen ZKT Technology Co., Ltd. Add.: 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial …

Text truncated - open the document above for the full version.