2BMTY-GM-9210Bluetooth Noise Reduction Travel pillow

② K lnGKADY Bluetooth Noise Reduction Travel pillow Bluetooth Bluetooth 5.3 Working 2'80% Version Humidity Supp。rtHFP 1.8, SPP 1.2, A2DP 1.3, Speaker Frequency 20Hz-20KHz Agreement AVRCP 1.6 Response Transmission 2'10m Horn Impedance 4.80±20% Battery DC 3.7V Storage -10-60 。 C Temperature ⑨⑨⑩⑧ Call Life 45 hours Music Play life 35 hours Bluetooth 5.3 Industrial noise Ergonomic de创gnBASF Technical deduction support Charging Time 2 .5 hours Pairing Name GM-9210 Features: 1 The memory foam inside is made of raw materials f「om BASF in Germany. which is safe. odorless. durable. soft. and comfortable 2. Built in Bluetooth and microphone fo「makingphone calls and streaming music playback 3. The Bluetooth vent pillow contains an integrated plastic bracket designed ergonomically to e忏ectivelyprotect the cervical spine 4. Industrial grade lip protectors can reduce noise by about 30 decibels. allowing you to enjoy a peaceful journey. They a「e suitable fo「va门口usscena门口ssuch as offices. cars. trains. airplanes. etc Brief Use Instruction: 1 p。wer on/off: Press and hold the # M switch fo「3-7secondstoturn on it. Otherwise. P「ess and hold the# M switch fo「3secondstoturn o忏 it 2. Bluet。。th c。nnection：①First connection: Afte「turningon the phone. prompt Power on+Pairing. open the phone's Bluetooth list. select the Bluetooth name GM -921 O. prompt Connected ②Bluetooth re connection: After turning on. it prompts Powe「on + ConnectedAutomatically reconnect afte「 booting up (re connection to the last connected phone) 3. Volume adjustment: Short press the"+" and" " switch to adjust the volume 4. Next song: Music playing. long p「ess “ ＋ ＂ fo「3 seconds to ente「the next song 5. Previ。us s。ng: While music is playing. long p「ess"-" fo「3 seconds to enter the previous song 6. Answering calls：①Answe「ing calls: Short press the pause# M button to answe「 ②Short press the# M switch twice to pause playback and make a call (default to the last phone number on the 「ecentcall list) To make a call to another phone numbe「 ， you need to manually dial it 6. Hanging up and r句ectingcalls: When a phone call or ring. short press the pause# M button to hang up Charging Instructions : Connect your USB cha「ger to the neck pillow. using the equipped USB charging cable Type C The charging indicator lights「ed to indicate that it is charging . The cha「ging indicato「lightsg「een to indicate that cha「ging is complete N。te: 1. Please use 5V 1 A charger for charging ; 2. The battery should be fully filled before using the headphones which is not using fo「a long time Warning: 1 This product and accesso门esshould be p「otectedf「om children ’ s contact to avoid 1nJury . 2. The「e are batte「ies and flammable materials in this product. Do not get close to the fire sou「ce and put it in a high tempe「atureenvironment to avoid explosion or fire. 4. Before and after using. store in a dry place. The tempe「atureshould not exceed 55 。 C Guangzhou Kingkady Household Products Co.,Ltd. ADD: No.5 Yong le Road,Huashan Town,Huadu District, Guangzhou,China.510880 Email: [email protected] www.kingkady.com G刷E且 ＠ STANDARD 100 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may caus e undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Internal Photos Antenna

Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 83 of 85 Edition：B.2 17. EUT Test Setup Photographs Conducted emissions Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 84 of 85 Edition：B.2 Radiated Measurement Photos

Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 58 of 85 Edition：B.2 Power NVNT 1-DH1 2480MHz Power NVNT 2-DH1 2402MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 59 of 85 Edition：B.2 Power NVNT 2-DH1 2441MHz Power NVNT 2-DH1 2480MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 60 of 85 Edition：B.2 Power NVNT 3-DH1 2402MHz Power NVNT 3-DH1 2441MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 61 of 85 Edition：B.2 Power NVNT 3-DH1 2480MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 62 of 85 Edition：B.2 12. Hopping Channel Separation 12.1 Block Diagram Of Test Setup 12.2 Limit Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 0.125W. 12.3 Test procedure 1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the spectrum. 2. Set the spectrum analyzer: RBW = 30kHz. VBW = 100kHz , Span = 2.0MHz. Sweep = auto; Detector Function = Peak. Trace = Max hold. 3. Allow the trace to stabilize. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. The limit is specified in one of the subparagraphs of this Section Submit this plot. 12.4 Test Result Mode Test Channel Separation (MHz) Limit(MHz) Result 1-DH1 Low 0.998 0.621 PASS 1-DH1 Middle 1.002 0.633 PASS 1-DH1 High 0.998 0.596 PASS 2-DH1 Low 0.998 0.839 PASS 2-DH1 Middle 0.998 0.825 PASS 2-DH1 High 0.998 0.847 PASS 3-DH1 Low 1.000 0.822 PASS 3-DH1 Middle 0.994 0.835 PASS 3-DH1 High 1.002 0.823 PASS Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 63 of 85 Edition：B.2 Test Graphs CFS NVNT 1-DH1 2402MHz CFS NVNT 1-DH1 2441MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 64 of 85 Edition：B.2 CFS NVNT 1-DH1 2480MHz CFS NVNT 2-DH1 2402MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 65 of 85 Edition：B.2 CFS NVNT 2-DH1 2441MHz CFS NVNT 2-DH1 2480MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 66 of 85 Edition：B.2 CFS NVNT 3-DH1 2402MHz CFS NVNT 3-DH1 2441MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 67 of 85 Edition：B.2 CFS NVNT 3-DH1 2480MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 68 of 85 Edition：B.2 13. Number Of Hopping Frequency 13.1 Block Diagram Of Test Setup 13.2 Limit Frequency hopping systems in the 2400-2483.5 MHz band shall use at least 15 channels. 13.3 Test procedure 1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the spectrum. 2. Set the spectrum analyzer: RBW = 100kHz. VBW = 300kHz. Sweep = auto; Detector Function = Peak. Trace = Max hold. 3. Allow the trace to stabilize. It may prove necessary to break the span up to sections. in order to clearly show all of the hopping frequencies. The limit is specified in one of the subparagraphs of this Section. 4. Set the spectrum analyzer: Start Frequency = 2.4GHz, Stop Frequency = 2.4835GHz. Sweep=auto; 13.4 Test Result Condition Mode Hopping Number Limit Verdict NVNT 1-DH1 79 15 Pass NVNT 2-DH1 79 15 Pass NVNT 3-DH1 79 15 Pass Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 69 of 85 Edition：B.2 Test Graphs Hopping No. NVNT 1-DH1 2441MHz Hopping No. NVNT 2-DH1 2441MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 70 of 85 Edition：B.2 Hopping No. NVNT 3-DH1 2441MHz Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 71 of 85 Edition：B.2 14. Dwell Time 14.1 Block Diagram Of Test Setup 14.2 Limit Frequency hopping systems in the 2400-2483.5 MHz band shall use at least 15 channels. The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. Frequency hopping systems may avoid or suppress transmissions on a particular hopping frequency provided that a minimum of 15 channels are used. 14.3 Test procedure 1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the spectrum. 2. Set spectrum analyzer span = 0. Centred on a hopping channel; 3. Set RBW = 1MHz and VBW = 3MHz.Sweep = as necessary to capture the entire dwell time per hopping channel. Set the EUT for DH5, DH3 and DH1 packet transmitting. 4. Use the marker-delta function to determine the dwell time. If this value varies with different modes of operation (e.g.. data rate. modulation format. etc.). repeat this test for each variation. The limit is specified in one of the subparagraphs of this Section. Submit this plot(s). 14.4 Test Result Mode Frequency (MHz) Pulse Time (ms) Total Dwell Time (ms) Burst Count Period Time (ms) Limit (ms) Verdict 1-DH1 2441 0.381 120.015 315 31600 400 Pass 1-DH3 2441 1.638 270.27 165 31600 400 Pass 1-DH5 2441 2.888 320.568 111 31600 400 Pass 2-DH1 2441 0.391 179.078 458 31600 400 Pass 2-DH3 2441 1.644 271.260 165 31600 400 Pass 2-DH5 2441 2.892 349.932 121 31600 400 Pass 3-DH1 2441 0.393 123.795 315 31600 400 Pass 3-DH3 2441 1.642 261.078 159 31600 400 Pass 3-DH5 2441 2.894 254.672 88 31600 400 Pass Note: Total Dwell Time (ms) = Pulse Time (ms)*Burst Count Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 72 of 85 Edition：B.2 Test Graphs Dwell NVNT 1-DH1 2441MHz One Burst Dwell NVNT 1-DH1 2441MHz Accumulated Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 73 of 85 Edition：B.2 Dwell NVNT 1-DH3 2441MHz One Burst Dwell NVNT 1-DH3 2441MHz Accumulated Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 74 of 85 Edition：B.2 Dwell NVNT 1-DH5 2441MHz One Burst Dwell NVNT 1-DH5 2441MHz Accumulated Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 75 of 85 Edition：B.2 Dwell NVNT 2-DH1 2441MHz One Burst Dwell NVN…

Text truncated - open the document above for the full version.

No.：BCTC/RF-EMC-005 Page: 1 of 85 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2412745025E Applicant: GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO.,LTD Product Name: Bluetooth Noise Reduction Travel pillow Test Model: GM-9210 Tested Date: 2024-12-02 to 2024-12-30 Issued Date: 2024-12-30 Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 2 of 85 Edition：B.2 FCC ID: 2BMTY-GM-9210 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Bluetooth Noise Reduction Travel pillow Trademark: N/A Model/Type Reference: GM-9210 Prepared For: GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO.,LTD Address: No,5 Yongle Road,Huashan Town,Huadu District, Guangzhou China.510880 Manufacturer: GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO.,LTD Address: No,5 Yongle Road,Huashan Town,Huadu District, Guangzhou China.510880 Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-12-02 Sample Tested Date: 2024-12-02 to 2024-12-30 Issue Date: 2024-12-30 Report No.: BCTC2412745025E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is Bluetooth Classic radio test report. Tested by: Approved by: Min Zhi Cheng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2412745025E No.：BCTC/RF-EMC-005 Page: 3 of 85 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test procedure .................................................................................................... 13 6.4 EUT operating Conditions ................................................................................... 13 6.5 Test Result .......................................................................................................... 14 7. Radiated emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test procedure .................................................................................................... 18 7.4 EUT operating Conditions ................................................................................... 19 7.5 Test Result .......................................................................................................... 19 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 25 8.1 Block Diagram Of Test Setup .............................................................................. 25 8.2 Limit .................................................................................................................... 25 8.3 Test procedure .................................................................................................... 26 8.4 EUT operating Conditions ................................................................................... 26 8.5 Test Result .......................................................................................................... 27 9. Spurious RF Conducted Emissions ..................................................................... 28 9.1 Block Diagram Of Test Setup .............................................................................. 28 9.2 Limit .................................................................................................................... 28 9.3 Test procedure .................................................................................................... 28 9.4 Test Result ..................................................................…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2481383-AO 1 / 1 TEST SETUP PHOTOS --BLANK BELOW--

Report No.: BL-SZ2481383-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Guangdong J&Y Industrial Co., Ltd. Address: No.285 Juhuashi Rd, Huashan Town, Huadu District, Guangzhou, China, P.C:510880 Equipment Type: Electric Earmuff with Bluetooth Model Name: G5M PRO Brand Name: N/A Test Standard: IEEE Std 149-2021 Sample Arrival Date: Test Date: Date of Issue: Aug. 30, 2024 Sep. 03, 2024 Sep. 25, 2024 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Xia Long Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2481383-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Sep. 25, 2024 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information ........................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................. 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards .................................................................................................................... 5 3.2 Test Verdict ......................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition ..................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................. 6 4.3 Test Setup ........................................................................................................................... 7 4.4 Test Frequencies ................................................................................................................. 7 ANNEX A TEST RESULTS ........................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 A.2 VSWR ................................................................................................................................. 8 ANNEX B RADIATION PATTERN ................................................................................................ 9 ANNEX C TEST SETUP PHOTOS ............................................................................................. 12 ANNEX D EUT PHOTO .............................................................................................................. 12 Report No.: BL-SZ2481383-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2481383-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Guangdong J&Y Industrial Co., Ltd. Address No.285 Juhuashi Rd, Huashan Town, Huadu District, Guangzhou, China, P.C:510880 2.2 Manufacturer Information Manufacturer N/A Address N/A 2.3 General Description for Equipment under Test (EUT) EUT Name Electric Earmuff with Bluetooth Model Name Under Test EM-9001BP Antenna Type PCB Antenna Dimensions 17.5*6.5 mm 2.4 Ancillary Equipment Note: Not applicable. Report No.: BL-SZ2481383-901 Tel: +86-755-66850100 E-mail: [email protected] Pag…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2481383-AA 1 / 1 EUT PHOTO --BLANK BELOW-- Antenna

FCC ID: 2BMTY-GM-9210 RF exposure evaluation §2.1093 Radiofrequency radiation exposure evaluation: Portable Devices. According to§15.247(i) and§1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the commission’s guidance. The 1-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  When the minimum test separation distance is < 5 mm, a distance of 5 mm according is applied to determine SAR test exclusion.  The result is rounded to one decimal place for comparison  GFSK Modulation Frequency (GHz) Max. Power (dBm) Max. Tune up Power (dBm) Max. Tune up Power (mW) Test distance (mm) Result exclusion thresholds for 1-g SAR 8DPSK 2.402 2.76 3.0 2.00 5 0.63 3.0 Conclusion: For the max result: 0.63W/Kg ≤ FCC Limit 3.0 for 1g SAR.

GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., Ltd U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: ANTEK SERVICE INC Address: 901 N PENNSYLVANIA ST STE 0 DENVER, CO 80203 FRN: 0033437609 Tel.: 01 303-8006306 Email: [email protected] Signed by: Shirley Kwok This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2024/12/24 Signed by (Printed Name/Title): The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., LTD Grantee Code: 2BMTY FCC ID: 2BMTY-GM-9210 FRN: 0036416618 Contact Name: Carry Li Address: No,5 Yongle Road,Huashan Town,Huadu District, Guangzhou China.510880 Telephone No: 15974260958 Email: [email protected] Applicant Signature: Date: 2024/12/24 Signed by (Printed Name/Title): Carry Li / Sales

Size:50*20mm FCC ID: 2BMTY-GM-9210 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation Label location

External Photos

GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., LTD 2024/12/24 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION EUT NAME: Bluetooth Noise Reduction Travel pillow Trademark: N/A MODEL: GM-9210 FCC ID: 2BMTY-GM-9210 To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title: Carry Li / Sales Contact information / address: No,5 Yongle Road,Huashan Town,Huadu District, Guangzhou China.510880

GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., LTD 2024/12/24 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Bluetooth Noise Reduction Travel pillow Trademark: N/A MODEL: GM-9210 FCC ID: 2BMTY-GM-9210 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title: Carry Li / Sales Contact information / address: No,5 Yongle Road,Huashan Town,Huadu District, Guangzhou China.510880

GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., LTD 2024/10/22 EUT NAME: Noise Deduction Travel Pillow Trademark: MODEL: GM-9210, HT-S056, HT-S057, HT-S058 FCC ID: 2BMTY-GM-9210 All the model are the same circuit and RF module, except model names. Sincerely Client’s signature: Client’s name / title: Carry Li / Sales Contact information / address: No,5 Yongle Road,Huashan Town,Huadu District, Guangzhou China.510880

(GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., LTD) (2025/5/22) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BMTY-GM-9210) [GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Carry Li (GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., LTD) (2025/5/22) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2BMTY-GM-9210) [GUANGZHOU KINGKADY HOUSEHOLD PRODUCTS CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Carry Li

(GUANGZHOU KINGKADY HOUSEHOLD PR…

Text truncated - open the document above for the full version.