2BMXJ-BTD6006.0 Bluetooth Adapter

6.0说明书 尺寸： 55*70mm（4折） 70G 单铜+正反面印刷 5.4 5.4 蓝牙6.0适配器 08L -8654 Wir eless Adapter 6.0 产品参数 产品名称： 6.0蓝牙适配器 蓝牙版本：6.0 频率范围：2.4GHz~2.4835GHz 传输距离：无障碍20米 蓝牙协议：A2DP/HSP/AVRCP/HID/PAN/GAVDP/DID/IOPT 支持系统：Windows 8.1/10/11 08L -8654-BT6.0适配器 x1 08L -8654-BT6.0 Adapter x1 Ins truction Manual x1 x1 Specific ations Name: 6.0 Wir eless adapter BT version: 6.0 Frequency range: 2.4GHz~2.4835GHz Transmission distance: 20m BT profile: A2DP/HSP/AVRCP/HID/PAN/GAVDP/DID/IOPT Compatible systems: Windows 8.1/10/11 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Qijiang Technology Limited Address: Room 205, Floor 2, Building E, Bantian, International Center, NO. 5, Huancheng South Road, Bantian Street, Longgang District, Shenzhen, China FCC ID: 2BMXJ-BTD600 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Qijiang Technology Limited] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: Shenzhen Qijiang Technology Limited Address: Room 205, Floor 2, Building E, Bantian, International Center, NO. 5, Huancheng South Road, Bantian Street, Longgang District, Shenzhen, China FRN: 0036433340 Contact Name: RUIBIN HUANG Telephone No: +86-755 2899 8019 Email: [email protected] Signature: Signature: Date: Mar. 18, 2026 Date: Mar. 18, 2026 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

ShenzhenQijiangTechnologyLimited Room205, Floor 2, BuildingE, BantianInternationalCenter,NO. 5, HuanchengSouth Road, BantianStreet,LonggangDistrict,Shenzhen,China AttestationStatements Not CoveredEntityApplicant& Not CoveredEquipment To: FederalCommunicationsCommissionDate:Mar. 18, 2026 7435 OaklandMills Road, Columbia,MD 21046,USA Ref: InformationRequiredby Section2.911(d)(5)(i)& (ii) FCC ID:2BMXJ-BTD600 FRN:0036433340 ShenzhenQijiangTechnologyLimited(“the applicant”) certifiesthat, as of the date of the filing of the application,the applicantis not identifiedon the CoveredList , establishedpursuantto § 1.50002of referencechapter, as an entity producing“covered” communicationequipment.The equipmentfor which authorizationis soughtis not “covered” telecommunicationsequipmentand video surveillance equipmentproducedby entitiesidentifiedon the Commission’s CoveredList that prohibitedfrom receivingan equipmentauthorizationpursuantto section§ 2.903of the FCC rules. Sincerelyyours, Applicant Signature Printed Name: RUIBIN HUANG Title: Manager Address: Room 205, Floor 2, Building E, Bantian International Center, NO. 5, Huancheng South Road, Bantian Street, Longgang District, Shenzhen, China Tel.: +86-755 2899 8019 Email: [email protected]

ShenzhenQijiangTechnologyLimited Room205, Floor 2, BuildingE, BantianInternationalCenter,NO. 5, HuanchengSouth Road, BantianStreet,LonggangDistrict,Shenzhen,China 1 |P a g e AttestationStatements To: FederalCommunicationsCommissionDate: Mar. 18, 2026 7435 OaklandMills Road, Columbia,MD 21046,USA Subject:Attestationof Compliancewith FCC CoveredList SoftwareRequirements FCC ID:2BMXJ-BTD600 ProductName:6.0 BluetoothAdapter This letter servesas an attestationthat the equipmentidentifiedabove☐is /☒is not(selectone) "covered" softwareas definedunder the FederalCommunicationsCommission(FCC) CoveredList requirements,as outlinedinFCC 22-84andKDB 986446. Specifically,the undersignedcertifiesthat the equipmentfor which authorizationis sought: 1.Does not containcybersecurityor anti-virussoftwareproducedor providedbyKasperskyLab, Inc.or any of its successors,assignees,parents,subsidiaries,affiliates,or any entity that has rebranded or relabeledsoftwareproducedby the aforementionedentities. 2.Does not have the capabilityto store, run, or deliverany softwareidentifiedon the FCC CoveredList, includingbut not limitedto cybersecurityand anti-virussoftware. To supportthis attestation,the appendixevaluationdocumentationhas been preparedand is includedin the certificationfiling. This attestationis based on a thoroughevaluationof the device'sdesign,functionality,and software environment.The undersignedaffirmsthat the informationprovidedis accurateand completeto the best of their knowledge. Sincerelyyours, Applicant Signature Printed Name: RUIBIN HUANG Title: Manager Address: Room 205, Floor 2, Building E, Bantian International Center, NO. 5, Huancheng South Road, Bantian Street, Longgang District, Shenzhen, China Tel.: +86-755 2899 8019 Email: [email protected] ShenzhenQijiangTechnologyLimited Room205,Floor2,BuildingE,BantianInternationalCenter,NO.5,HuanchengSouthRoad, BantianStreet,LonggangDistrict,Shenzhen,China 2|Page EvaluationregardingtotheCoveredListSoftware: Compliance Methodology EvaluationProcessResults Deviceis Inherent compliance ☒ TheChipset(s)usedislimitedtorun theCybersecurityoranti-virus software. Compliance ☐ TheMemoryusedislimitedtorunthe Cybersecurityoranti-virussoftware. Compliance ☐ Thereisstoragecapacitylimitationfor storeorinstalltheCybersecurityor anti-virussoftware. Compliance ☐ Operatingsystemusedislimitedto run,installordelivertheCybersecurity oranti-virussoftware. Compliance Deviceisnot Inherent compliance ☐ EvaluationBasedonSoftware BillofMaterials(SBoM) Seeattached“SBoM“ Note:TheSBoMcontentislimited tothescopeofcoveredlist software(e.g.antivirusand cybersecuritysoftware). ☐ EvaluationBasedonScanfor Softwareonthedevice ☐ EvaluationBasedonFilesystemscan ☐ EvaluationBasedonRunning softwarecheck

ShenzhenQijiangTechnologyLimited Room205, Floor 2, BuildingE, BantianInternationalCenter,NO. 5, HuanchengSouth Road,BantianStreet,LonggangDistrict,Shenzhen,China Office of EngineeringTechnology FederalCommunicationsCommission 7435 OaklandMills Road Columbia,MD 21046 USA Date: Mar. 18, 2026 Subject;Requestfor Confidentiality FCC ID: 2BMXJ-BTD600 To WhomIt May Concern, Pursuantto the provisionsof the Commission’s rules Title 47 Sections§0.457 and §0.459,we are requestingthe Commissionto withholdthe followingattachment(s)as confidential documentsfrom public disclosureindefinitely. Thesedocumentscontaindetailedsystemand equipmentdescriptionsand are consideredas proprietaryinformationin operationof the equipment.The public disclosureof these documents might be harmfulto our companyand would give competitorsan unfair advantagein the market. SchematicDiagram Block Diagram OperationalDescription Parts List In additionalto abovementioneddocuments,in order to complywith the marketingregulations in Title 47 CFR §2.803 and the importationrules in Title 47 CFR §2.1204,while ensuringthat businesssensitiveinformationremainsconfidentialuntil the actualmarketingof newly authorizeddevices,we requestShort Term Confidentialityof the followingattachment(s); ExternalPhotos Test Setup Photos InternalPhotos User Manual For 45 days, pursuantto PublicNoticeDA 04-1705. OR For 180 days pursuantto KDB 726920D01. It is our understandingthat all measurementtest reports,FCC ID label formatand correspondenceduringthe certificationreviewprocesscannotbe grantedas confidential documentsand this informationwill be availablefor public reviewonce the grant of equipment authorizationis issued. Sincerely, Signature: Name: RUIBIN HUANG Title: Manager

Shenzhen Qijiang Technology Limited Room 205, Floor 2, Building E, Bantian International Center, NO. 5, Huancheng South Road, Bantian Street, Longgang District, Shenzhen, China (Mar. 18, 2026) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BMXJ-BTD600 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Shenzhen Qijiang Technology Limited). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (RUIBIN HUANG) (Manager) Tel: +86-755 2899 8019 Fax: +86-755 2899 8019 Email: [email protected]

Shenzhen Qijiang Technology Limited Room 205, Floor 2, Building E, Bantian International Center, NO. 5, Huancheng South Road, Bantian Street, Longgang District, Shenzhen, China Mar. 18, 2026 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2BMXJ-BTD600 Models: BTD600, BT600, BT601, BT602, BT603 To Whom It May Concern: We, The Shenzhen Qijiang Technology Limited hereby declare that the model : BT600, BT601, BT602, BT603 is identical with the model : BTD600, The series models are identical except for model name and appearance colors, which have no effect on test result. Except for the different above, no other modification is performed. Sincerely, Shenzhen Qijiang Technology Limited Signature: [RUIBIN HUANG, Manager]

Report No.: AGC00259260201AP03 Page 1 of 3 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC00259260201AP03 Page 2 of 3 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC00259260201AP03 Page 3 of 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm*20mm FCC ID: 2BMXJ-BTD600

Report No.: AGC00259260201AP03 Page 1 of 2 INTERNAL PHOTOS OPEN VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) BT Antenna Report No.: AGC00259260201AP03 Page 2 of 2 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC00259260201FH01 FCC ID : 2BMXJ-BTD600 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : 6.0 Bluetooth Adapter BRAND NAME : N/A MODEL NAME : BTD600, BT600, BT601, BT602, BT603 APPLICANT : Shenzhen Qijiang Technology Limited DATE OF ISSUE : Mar. 18, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00259260201FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 18, 2026 Valid Initial Release Report No.: AGC00259260201FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC00259260201FH01 Page 4 of 10 1. General Information Applicant Shenzhen Qijiang Technology Limited Address Room 205, Floor 2, Building E, Bantian International Center, NO.5, Huancheng South Road Bantian Street, Longgang District, Shenzhen, China Manufacturer Shenzhen Qijiang Technology Limited Address Room 205, Floor 2, Building E, Bantian International Center, NO.5, Huancheng South Road Bantian Street, Longgang District, Shenzhen, China Factory Shenzhen Qijiang Technology Limited Address Room 205, Floor 2, Building E, Bantian International Center, NO.5, Huancheng South Road Bantian Street, Longgang District, Shenzhen, China Product Designation 6.0 Bluetooth Adapter Brand Name N/A Test Model BTD600 Series Model(s) BT600, BT601, BT602, BT603 Difference Description The series models are identical except for model name and appearance colors, which have no effect on test result. Date of receipt of test item Feb. 10, 2026 Date of Test Feb. 10, 2026 to Mar. 18, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Mar. 18, 2026 Reviewed By Jack Gui (Reviewer) Mar. 18, 2026 Approved By Angela Li (Authorized Officer) Mar. 18, 2026 Report No.: AGC00259260201FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version 8654-V12 Software Version N/A Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK BLE GFSK 1Mbps GFSK 2Mbps Maximum Transmitter Power 2.197dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 2.3dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC00259260201FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 248…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna plate Monopole Antenna Antenna peak gain 2.3 dBi Frequency range Connect type Direct Connect 2. Picture of antenna 3. Antenna Radiation Pattern Radiation pattern @2.402GHz Company name: Shenzhen Jitong Electronics Co., LTD Company Address: Room 705, Building C2, Bantian International Center, Longgang District, Shenzhen Radiation pattern @2.441GHz Radiation pattern @2.480GHz

Page 1 of 79 FCC Test Report Report No.: AGC00259260201FR01 FCC ID : 2BMXJ-BTD600 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : 6.0 Bluetooth Adapter BRAND NAME : N/A MODEL NAME : BTD600, BT600, BT601, BT602, BT603 APPLICANT : Shenzhen Qijiang Technology Limited DATE OF ISSUE : Mar. 18, 2026 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00259260201FR01 Page 2 of 79 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 18, 2026 Valid Initial Release Report No.: AGC00259260201FR01 Page 3 of 79 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour. ............................................................................. 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ........................................................................................................................ 11 3.4 Measurement Uncertainty ........................................................................................................................ 11 3.5 List of Equipment Used ........................................................................................................................... 12 4. System Test Configuration ........................................................................................................................... 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 16 5. Description of Test Modes ........................................................................................................................... 17 6. RF Output Power Measurement .................................................................................................................. 18 6.1 Provisions Applicable .............................................................................................................................. 18 6.2 Measurement Procedure ......................................................................................................................... 18 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 18 6.4 Measurement Result ............................................................................................................................... 19 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 25 7.1 Provisions Applicable .............................................................................................................................. 25 7.2 Measurement Procedure ......................................................................................................................... 25 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 25 7.4 Measurement Results ............................................................................................................................. 26 8. Conducted Band Edge and Out-of-Band Emiss…

Text truncated - open the document above for the full version.

Report No.: AGC00259260201FR01 Page 76 of 79 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Hot Side RESULT: PASS Report No.: AGC00259260201FR01 Page 77 of 79 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Neutral Side RESULT: PASS Report No.: AGC00259260201FR01 Page 78 of 79 Appendix I: Photographs of Test Setup Refer to the Report No.: AGC00259260201AP02 Appendix II: Photographs of Test EUT Refer to the Report No.: AGC00259260201AP03 Report No.: AGC00259260201FR01 Page 79 of 79 Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 5. Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company. 6. The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations. 7. Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing. 8. The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them. 9. Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages. -----End of Report-----

Report No.: AGC00259260201AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC00259260201AP02 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************