2BN3W-ZB-WC25WCXDesktop Wireless Charger

Huizhou Zhongbang Electronics Co., Ltd. Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Feb. 4, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BN3W-ZB-WC25WCX Huizhou Zhongbang Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: yoyo wang Title: Manager Address: Floor 1-4, No. 90 Songbai Ling Road, Sanhe Village, Tonghu Town, Zhongkai High- Tech Zone, Huizhou, 516121 Guangdong, P.R. China Tel.: 13538214502 Email: [email protected]

Huizhou Zhongbang Electronics Co., Ltd. 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Feb. 4, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BN3W-ZB-WC25WCX Product Name: Desktop Wireless Charger This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: yoyo wang Title: Manager Address: Floor 1-4, No. 90 Songbai Ling Road, Sanhe Village, Tonghu Town, Zhongkai High- Tech Zone, Huizhou, 516121 Guangdong, P.R. China Tel.: 13538214502 Email: [email protected] Huizhou Zhongbang Electronics Co., Ltd. 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Huizhou Zhongbang Electronics Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [February 5, 2026] U.S. Agent Designation [Huizhou Zhongbang Electronics Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BN3W-ZB-WC25WCX Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Huizhou Zhongbang Electronics Co., Ltd.]. [Huizhou Zhongbang Electronics Co., Ltd.] with the FRN [0036756138] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [yoyo wang] [Huiying Fan] [Manager] [Director] [Huizhou Zhongbang Electronics Co., Ltd.] [GLOCERTS TECHNOLOGY INC]

Huizhou Zhongbang Electronics Co., Ltd. (February 4, 2026) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BN3W-ZB-WC25WCX Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired.  User Manual  Internal Photos Sincerely, Applicant Signature Printed Name: yoyo wang Title: Manager Address: Floor 1-4, No. 90 Songbai Ling Road, Sanhe Village, Tonghu Town, Zhongkai High-Tech Zone, Huizhou, 516121 Guangdong, P.R. China Tel.: 13538214502 Email: [email protected]

Huizhou Zhongbang Electronics Co., Ltd. February 4, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BN3W-ZB-WC25WCX I, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen CTB Testing Technology Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Huizhou Zhongbang Electronics Co., Ltd. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Applicant Signature Printed Name: yoyo wang Title: Manager Address: Floor 1-4, No. 90 Songbai Ling Road, Sanhe Village, Tonghu Town, Zhongkai High-Tech Zone, Huizhou, 516121 Guangdong, P.R. China Tel.: 13538214502 Email: [email protected]

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 3 Model: ZB-WC25WCX External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 3 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 3

FCC ID LABEL: Label Location: FCC ID: 2BN3W-ZB-WC25WCX Model No.: ZB-WC25WCX 1.5cm 3cm

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 10 RF EXPOSURE REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Desktop Wireless Charger FCC ID: 2BN3W-ZB-WC25WCX Trademark(s): Model/Type reference: ZB-WC25WCX Applicant’s name: Huizhou Zhongbang Electronics Co., Ltd. Address: Floor 1-4, No. 90 Songbai Ling Road, Sanhe Village, Tonghu Town, Zhongkai High-Tech Zone, Huizhou, 516121 Guangdong, P.R. China Manufacturer: CONG TY TNHH ZBPOWER VIETNAM Address: No.3, Road No.9, Tan Duc Industrial Park, Duc Hoa Commune, 82700 Tay Ninh Province,Vietnam Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jan. 14, 2026 Sample tested Date: Jan. 14, 2026 to Jan. 20, 2026 Issue Date: Jan. 20, 2026 Report No.: CTB26011414901RF02 Test Standards FCC CFR 47 part1, 1.1307(b), 1.1310, 47 CFR§2.1091; KDB 680106 D01 Wireless Power Transfer v04 Test Results PASS Remark: This is wireless charger EMF report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26011414901RF02 EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page2 of 10 Table of Contents Page 1 . GENERAL INFORMATION 3 1.1 . Independent Operation Mode 3 1.2 . Test Supporting System 3 2 .LIST OF T EST AND M EASUREMENT I NSTRUMENTS 4 2.1 . For conducted emission at the mains terminals test 4 3. METHOD OF MEASUREMENT5 3. 1.Applicable Standard5 4. TEST RESULT6 4.1. Conducted Emission at the Mains Terminals Test 6 4.2. Equipment Approval Considerations: 7 4.3. E and H field Strength 8 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26011414901RF02 EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page3 of 10 1. GENERAL INFORMATION 1.1. Independent Operation Mode The basic operation mode is: 1.1.1. wireless charger power: 15 W 1.2. Test Supporting System Adapter Description: Adapter Model No.: HP18A-0902000-AU Power Input: AC100-240V~ 1.0A 50/60Hz Output: 9V⎓2.0A DC Line: Unshielded, Detachable 1.2m Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26011414901RF02 EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page4 of 10 2.LIST OF T EST AND MEASUREMENT I NSTRUMENTS 2.1. For conducted emission at the mains terminals test Item Equipment Brand Model No. Serial No. Last calibration Calibrated until 1 EMF TESTER Wavecontrol SMP600/WP4 00-3 15SN0164/21W P1200029 2025/10/22 2026/10/21 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26011414901RF02 EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page5 of 10 3. METHOD OF MEASUREMENT 3. 1.Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. According KDB680106 D01: KDB 680106 D01 Wireless Power Transfer v04. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26011414901RF02 EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page6 of 10 4. TEST RESULT 4.1. Conducted Emission at the Mains Terminals Test Note: Measurements should be made from all sides and the top of the primary/client pair, with the 20 cm measured from the center of the probe(s) to the edge of the device Test Procedure: a) The RF exposure test was performed on 360 degree turn table in anechoic chamber. b) The measurement probe was placed at test distance (20cm) which is between the edge of the charger and the geometric centre of probe. c) The turn table was rotated 360d degree to search of highest strength. d) The highest emission level was recorded and compared with limit as soon as measurement of each points were completed. e) The EUT were measured according to the dictates of KDB 680106v04 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26011414901RF02 EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page7 of 10 4.2. Equipment Approval Considerations: The EUT does comply with item 5(b) of KDB 680106 V04 1) The power transfer frequency is below 1 MHz. Ye s , the device operate in the frequency range from 111kHz to 205kHz 2) The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. Yes, the maximum output power of the primary coil is 15000mW. 3) A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact). Ye s , the surfaces of the transmitter and client device enclosures are in physical contact 4) Only § 2.1091-Mobile exposure conditions apply (i.e., this provision does not cover § 2.1093-Portable exposure conditions).. Yes, the EUT is a Mobile Wireless Charger 5) The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. Yes, the EUT field strength levels are less 50% x MPE limit. 6) For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power av…

Text truncated - open the document above for the full version.

Zhihui Qiu 20260106 ZLGD-Y22X39.5- 80-FR Acknowledgment ZLGD-A1-0535 coil+hard ferrite sheet Dongguan city DFL Electronic Technology Co.,LTD CUSTOMER: PART NO.: DESCRIPTION: SPECIFICATION: 107 Xinfeng West Road, Shijie, Dongguan, Guangdong, TEL：0769-86016320 FAX：0769-86372427 Page One，Two pages in total DATE: 22x39.5,0.08×80P，lead line length 0mm, (measured from edge of ferrite sheet) 20260106 SPECIFICATION FOR APPROVEAL TRX APPROVAL Production Audit CUSTOMER APPROVAL Result: QualifiedDisqualifiedOther Recognition date Project Approved Recognition date Xiaoxian Zeng 8 : SPECIFICATION 2、schematic diagram: PREPARED BY/DATE CHECKED BY/DATE Dongguan city DFL Electronic Technology Co.,LTD DESC Rev:A Customer: Date: Description: 1、DIMENSION:(mm) A B C D E F G I Note: 3、WindingSpecification: NO.TERMINALWIRE Turns Winding Direction coil+hard ferrite sheet 20.0±0.5 3.0±2.0 0.8±0.2 version ZLGD-Y22X39.5- 80-FR ZLGD-A1-0535 4、 ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C,RELATIVE HUMIDITY:65±20% NO. CUSTOMEU/DATE TERMINALITEM SPECIFICATION TEST FREQUENCYTEST EQUIPMENTS 1 2 3 4 IND. IND. Q value DCR 20260106 22.0±1.0 39.5±2.0 1 0.08×0P Silk covered wire 11TS Counterclockwise 1. The coil is pasted with G43*0.8 hard ferrite 2. Wrap 5MM high-temperature tape around the coil outlet position. 3. Double-sided tape for ears attached to the back of the ferite sheet 4. The coil cannot be loosened J K L 80.0±4.0 M N O P 8.3UH ± 10% with hard ferrite added 100KHz/1.0V SHDA 1062 H 8 B D E F G H C I 两引 线套 热缩 管 PE 膜 双 面 胶 42.5±1.0

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 24 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Desktop Wireless Charger FCC ID: 2BN3W-ZB-WC25WCX Trademark(s): Model/Type reference: ZB-WC25WCX Applicant’s name: Huizhou Zhongbang Electronics Co., Ltd. Address: Floor 1-4, No. 90 Songbai Ling Road, Sanhe Village, Tonghu Town, Zhongkai High-Tech Zone, Huizhou, 516121 Guangdong, P.R. China Manufacturer: CONG TY TNHH ZBPOWER VIETNAM Address: No.3, Road No.9, Tan Duc Industrial Park, Duc Hoa Commune, 82700 Tay Ninh Province,Vietnam Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jan. 14, 2026 Sample tested Date: Jan. 14, 2026 to Mar. 02 , 2026 Issue Date: Mar. 02, 2026 Report No.: CTB26011414901RF01 Test Standards FCC Part 15 C Test Results PASS Remark: This is wireless charger radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26011414901RF01 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 24 TABLE OF CONTENTS 1. GENERAL INFORMATION ........................................................................................................ 3 1.1. Report information......................................................................................................................... 3 1.2. Measurement Uncertainty ............................................................................................................ 3 1.3. Test Facility .................................................................................................................................... 3 1.4. Test Uncertainty ............................................................................................................................ 4 2. PRODUCT DESCRIPTION ......................................................................................................... 5 2.1. EUT Description ............................................................................................................................ 5 2.2. Block Diagram of EUT Configuration.......................................................................................... 5 2.3. Test Conditions .............................................................................................................................. 5 2.4. Description Of Support Units (Conducted Mode) ..................................................................... 6 3. TEST RESULTS SUMMARY ..................................................................................................... 7 4. TEST EQUIPMENT USED .......................................................................................................... 8 4.1. MEASUREMENT INSTRUMENTS LIST ................................................................................... 8 5. CONDUCTED EMISSION TEST .............................................................................................. 11 5.1. Block Diagram of Test Setup ..................................................................................................... 11 5.2. Test Standard .............................................................................................................................. 11 5.3. Conducted Emission Limit ......................................................................................................... 11 5.4. EUT Configuration on Test ........................................................................................................ 11 5.5. Operating Condition of EUT ....................................................................................................... 11 5.6. Test Procedure ............................................................................................................................ 12 5.7. Test Result ................................................................................................................................... 12 6. RADIATED EMISSION MEASUREMENT ............................................................................. 15 6.1. Block Diagram of Test Setup ..................................................................................................... 15 6.2. Test Standard .............................................................................................................................. 16 6.3. EMI Test Receiver Setup ........................................................................................................... 16 6.4. Test Procedure ............................................................................................................................ 16 6.5. Test Result ................................................................................................................................... 16 7. OCCUPIED BANDWIDTH ........................................................................................................ 20 7.1. Block Diagram of Test Setup ..................................................................................................... 20 7.2. Rules and specifications ............................................................................................................ 20 7…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 3 Model: ZB-WC25WCX Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 3 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 3

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: ZB-WC25WCX Radiated Emission 9KHz-30MHz 30MHz-1GHz Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 Conducted emissions