2BN43-PCB03-915Control Board with Wireless for Solar Tracking Systems

U.S. Agent Designation for Service of Process ATTENTION: REGARDING: Designated U.S. Agent Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC Certification - Section 2.911 ( d)(7) Information Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we ("the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.91 l(d)(7) on be halfofthe Applicant noted below. U.S. Agent Signature: Date: February 11, 2026 Signed by (Printed N ame/Title): Nathan Grinager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year afte r terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: SOL TIGUA SRL Grantee FRN: 0036746725 Grantee C ode : 2BN43 FCC ID: 2BN 43-PCB03-915 Contact Name: Vittorio Orioli Street A ddress: via Roma 54 City/Province/Zip: 47035 Telephone No: +39 0547 52600 E mail: [email protected] S OLTIGUA S RL Applicant Signature: � Date: Feb 4, 2026 Signed by (Printed Name/Title): VITTORIO ORIOL!/ TECHNICAL DIRECTOR SOLTIGUA SRL Via Roma, 54 - 47035 Gambettola (FC) - Italia T: +39 0547 52600 [email protected] - www.soltigua.com 2

SOLTIGUA SRL Via Roma, 54 - 47035 Gambettola (FC) - Italy T: +39 0547 52600 [email protected] – www.soltigua.com Fiscal Code and VAT number: 00139220404 Intra Code: IT 00139220404 - R.E.A. Forlì-Cesena: n. 26786 Share Capital: Euro 518’520 i.v. COVER LETTER Device 2BN43-PCB03-915 is equipped with a standard SMA antenna connector. Standard 915MHz with SMA connector provided with Soltigua systems are listed in antenna-datasheet folder. Device 2BN43-PCB03-915 is sold by Soltigua as a part of solar tracking system. Soltiga srl is an Italian Project-based company working in the solar market as BTO ( Build-to-order company ). Soltigua traking systems are professional, industrial and customized products only for company’s working on Energy market. Marketing : The device cannot be sold retail, to the general public or by mail order. It must be sold to dealers or have strict marketing control. Professional installation : - Soltigua products installation is controlled by Soltigua. - Installation is made by customer who hire professional installers. - Professional installers become trained with manuals , wiring diagrams and/or training. - Before to activate the system is required the Soltigua Commissioning. - During Soltigua Commissioning a Soltigua Technician checks if the system has been built in the right way. Only if the system pass the commissioning can be activated. Application : The intended use is not for the general public. It is only for industrial use. In the Soltigua Manual is reported : PCB03.xy.zz must be installed and maintained by qualified professionals ( compliant with FCC 15.203 requirement ). No other antenna than that furnished can be used with the device. Change antenna type is prohibited. If required an antenna as spare part only Soltigua can supply the spare part (same antenna ). WARNING : 15.203 . ONLY professional and qualified installer can install and maintein Soltigua Systems.

050222-17 SOLTIGUA SRL Via Roma, 54 - 47035 Gambettola (FC) - Italy T: +39 0547 [email protected] – www.soltigua.com Fiscal Code and VAT number: 00139220404Intra Code: IT 00139220404 - R.E.A. Forlì-Cesena: n. 26786Share Capital: Euro 518’520 i.v. Request for Confidentiality Date: April 3, 2026 Subject: Confidentiality Request for: 2BN43-PCB03-915 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☒ Short Term --------------------------- External Photos ☒ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☒ Permanent Parts List & Placement/BOM ☐ Short Term ☒ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☒ Short Term --------------------------- Test Setup Photos ☒ Short Term ☐ Permanent * 1 User’s Manual SOLTIGUA SRL has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications: Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: ( not requested ) . Sincerely, By: __________________________ VITTORIO ORIOLI (Signature/Title 2 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

050222-17 SOLTIGUA SRL Via Roma, 54 - 47035 Gambettola (FC) - Italy T: +39 0547 [email protected] – www.soltigua.com Fiscal Code and VAT number: 00139220404Intra Code: IT 00139220404 - R.E.A. Forlì-Cesena: n. 26786Share Capital: Euro 518’520 i.v. Authority to Act as Agent Date: March 20, 2026 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: IMQ Spa is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: Feb 2, 2027 By: VITTORIO ORIOLI (Signature 1 ) (Print name) Title: TECHNICAL DIRECTOR On behalf of: SOLTIGUA SRL (Company Name) Telephone: + 39 329 2284945 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC ID LABEL / LABEL LOCATION Fig 1 : Product Label for PCB board equipped with RADIO 915 Fig 2 : Product Label for PCB board NOT equipped with RADIO 915 Fig 3: Secondary label used for internal traceability. Fig 4 : Product Label location Product label second Label Fig 5 : PCB03 Board dimensions FCC 15.19 Labeling requirements: 15.19 (4) : Device PCB03 is so small and it is impraticable to label it with the statement specified under 15.19 (a). For this reason statement specified under 15.19 (a) are placed in the user manual and must also either be placed on the device packaging or on a removable label attached to the device. 15.19 requirement (a) (1) APPLICABLE “This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.” 15.19 requirement (a) (2) NOT APPLICABLE 15.19 requirement (a) (3) APPLICABLE “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” Fig 6 : 15.19 requirements Label Fig 7 : 15.19 requirements Label Box location 15.19 ( b) (4 ) requirements ( label material and printer ) : Tape printing involves a multi-layered process where text or graphics are applied using thermal transfer technology and then protected by a super-clear polyethylene laminate. This process creates a durable, long-lasting label resistant to various conditions, like water, chemicals, and UV light), and is suitable for both indoor and outdoor labeling needs. PCB03 is equipped with a permanent and indelible label, placed on the main pcb face. Label consist of six layers of materials, resulting in a thin, extremely strong label. Characters are formed with a thermal transfer ink and sandwiched between two protective layers of PET (polyethylene film). The result is a virtually indestructible label that can withstand even the harshest conditions. Tape printing involves a multi-layered process where text or graphics are applied using thermal transfer technology and then protected by a super-clear polyethylene laminate. This process creates a durable, long-lasting label resistant to various conditions, like water, chemicals, and UV light), and is suitable for both indoor and outdoor labeling needs. Printer-Datasheet_Brother-TZE-251 >>

The results of tests and checks reported in this Test Report refer exclusively to the samples tested as received and described in the Report itself. This Report shall not be reproduced partially without the written approval of IMQ S.p.A.. IMQ declines any responsibility derived from information provided aside by the applicant. Information provided by the applicant are marked with "^". The authenticity of this Test Report and its contents can be verified by contacting IMQ S.p.A., responsible for this Test Report. EMF ASSESSMENT REPORT FCC Rules: Code of Federal Regulations (CFR) no. 47 RF Exposure Report Number. .............................. : AR25-0115794-02 Date of issue ................................... : 2025-12-09 Total number of pages ................... : 14 Name of Testing Laboratory preparing the Report ...................... : IMQ S.p.A. - Milano Applicant’s name ^ ......................... : SOLTIGUA S.R.L. Address ^ ........................................ : Via Roma, 54 - 47035 Gambettola (FC) - Italy Test specification: Standards ....................................... : 47 CFR Part 15.247 (i) and subpart § 1.1310 Test Report Form No. ..................... : TRF 3609/9 Test Report Form(s) Originator ..... : IMQ S.p.A. Master TRF ...................................... : Dated 2025-09-29 Test item description ^ .................. : Electronic board Trademark or brand name ^ .......... : SOLTIGUA Manufacturer ^ ................................ : SOLTIGUA S.R.L. Model/Type reference(s) ^ ............. : PCB03.xy.zz Ratings ^ ......................................... : 24V DC Revision sheet: Rev. Date Revision description 0 2025-12-09 First Emission Assessment report No. AR25-0115794-02 Date: 2025-12-09 Page 2 of 14 Responsible Assessment Laboratory and testing location(s): Assessment Laboratory: IMQ S.p.A.-Milano Assessment location/ address .................... : Viale Lombardia, 20/B – 20021 Bollate (MI) - Italy Assessed by (name, function, signature) .. : Alessandro Zappa [Laboratory technician] Approved by (name, function, signature) .. : Federico Sirtori [Laboratory manager] List of Attachments (including a total number of pages in each attachment):/ Summary of testing Tests performed (name of test and test clause): 3.1 RF exposure Testing location: Viale Lombardia, 20/B – 20021 Bollate (MI) - Italy Assessment report No. AR25-0115794-02 Date: 2025-12-09 Page 3 of 14 Copy of marking plate ^............. : The artwork below may be only a draft. The use of certification marks on a product must be authorized by the respective NCBs that own these marks. where: PCB03.02.99 is the product version N°: 778107 is the serial number 10/02/2025 is the production date R 1.0 is the hardware revision QR code include all previous data listed Assessment report No. AR25-0115794-02 Date: 2025-12-09 Page 4 of 14 Possible test case verdicts: - test case does not apply to the test item . : N/A (Not Applicable) - test item does meet the requirement ....... : P (Pass) - test item does not meet the requirement . : F (Fail) - test not performed ..................................... : N/P (Not Performed) IMQ reference samples ................................ : BEM 121472 (Item(s) sampled and sent by applicant) Date of receipt of test item .......................... : 2025-03-11 Date of acceptance of test item ................... : 2025-10-20 Date (s) of performance of tests ................. : 2025-10-20 ÷ 2025-10-29 Object under analysis recognition ............. : Not carried out Except where stated, characteristics of products were taken from client description and were not verified by the laboratory General remarks: Throughout this report a comma / point is used as the decimal separator. Throughout this report, the term “Test item” is used over terms such as Test object, EUT or DUT. The ability or reliability of this product to perform its intended function in a particular application has not been investigated. Name and address of factory (ies) ^ ........... : SOLTIGUA S.R.L. Via Roma, 54 - 47035 Gambettola (FC) - Italy General product information (GPI) and other remarks ^: printed control board with wireless communication, which operates on 915-926 MHz frequencies Environmental reference conditions .......... : The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Temperature Humidity Atmospheric pressure 15 °C – 35 °C 30 % - 60 % 800 hPa – 1060 hPa If explicitly required in the basic standard or applied product standard the climatic values are recorded and documented separately in this test report. The laboratory is monitored by a continuous environmental conditions measurements system. Temperature, humidity and pressure data are recorded on a weekly basis and stored in local archive. Assessment report No. AR25-0115794-02 Date: 2025-12-09 Page 5 of 14 Table of Contents: 1 General description of test item ^ ..................................................................................................... 6 1.1 Photo(s) of the test item ...................................................................................................... 6 1.2 Test item(s) ......................................................................................................................... 8 1.3 Port(s) .................................................................................................................................. 9 1.4 Power rating(s) .................................................................................................................. 10 1.5 Additional parameters ....................................................................................................... 10 1.6 Radio parameters .............................................................................................................. 11 1.7 Elect…

Text truncated - open the document above for the full version.

The results of tests and checks reported in this Test Report refer exclusively to the samples tested and described in the Report itself. This Report shall not be reproduced partially the written approval of IMQ S.p.A.. The authenticity of this Test Report and its contents can be verified by contacting IMQ S.p.A., responsible for this Test Report. Mod. TRF 3712 /3 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY TEST REPORT No. AR25-0115794-01 performed in accordance with FCC Rules: Code of Federal Regulations (CFR) no. 47 Part 15 Subpart C Section 15.247 PRODUCT Electronic board MODEL(s) TESTED PCB03.xy.zz FCC ID 2BN43-PCB03-915 TRADE MARK(s) SOLTIGUA APPLICANT SOLTIGUA S.R.L. Via Roma, 54 - 47035 Gambettola (FC) - Italy Tested by Alessandro Zappa [Laboratory technician] Approved by Federico Sirtori [Laboratory manager] Revision Sheet Release No. Date Revision Description Rev. 0 2025-12-09 First edition Digital signed - AR25-0115794-01_TR_FCC 15.247_Soltigua_PCB03 Rev. 1 2026-06-26 Second edition Added radiated emission measurements with 2 alternative antennas in paragraph 7.3 Rev. 2 2026-07-20 Third edition Removal of one antenna model in permitted antennas list at pages 6, 12. Mod. TRF 3712 / 3 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY Test Report No. AR25-0115794-01 Date: 2026-07-20 Page 2 of 97 Mod. TRF 3712 / 3 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 1. GENERAL DATA SAMPLE Samples received on 2025-03-11 (Item(s) sampled and sent by applicant) IMQ reference samples BEM 121472 Samples tested No. 1 Object under analysis recognition Not carried out Date of acceptance of test item 2025-10-20 TEST LOCATION Testing dates 2025-10-20 ÷ 2025-10-29 (first session) 2026-05-25 ÷ 2026-05-27 (second session) Testing laboratory. IMQ S.p.A. - Milano Testing site Via Quintiliano, 43 – IT-20138 Milano - Italy Viale Lombardia, 20/B – 20021 Bollate (MI) - Italy ENVIRONMENTAL CONDITIONING Parameter Measured Ambient Temperature 20  25 C Relative Humidity 50  60 % Atmospheric Pressure 900  1000 mbar The laboratory is monitored by a continuous environmental conditions measurements system. Temperature, humidity and pressure data are recorded on a weekly basis and stored in local archive. REMARKS Throughout this report a point is used as the decimal separator. The ability or reliability of this product to perform its intended function in a particular application has not been investigated. The test results apply to the sample as received. All information relating to the details of the equipment under test at the § 3 of this document was provided by the applicant. IMQ declines any responsibility derived from missing or wrong information provided aside by the applicant. Test Report No. AR25-0115794-01 Date: 2026-07-20 Page 3 of 97 Mod. TRF 3712 / 3 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 2. REFERENCE DOCUMENT DOCUMENT DATE TITLE 47 CFR Part 15 - Radio Frequency Device ANSI C63.4 2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz ANSI C63.10 2020 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices Test Report No. AR25-0115794-01 Date: 2026-07-20 Page 4 of 97 Mod. TRF 3712 / 3 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 3. UNIT UNDER TEST (EUT) DETAILS GENERAL DATA No. TEST ITEM NAME UNIQUE IDENTIFICATION / TYPE / DESCRIPTION EXTENT OF TEST 1 PCB03.02.99 full function version Tested in full 2 PCB03.xy.zz see supplementary information extended Engineering statement for untested variants / product family: Supplementary information: Test Report No. AR25-0115794-01 Date: 2026-07-20 Page 5 of 97 Mod. TRF 3712 / 3 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY FCC ID 2BN43-PCB03-915 Manufacturer SOLTIGUA S.R.L. Via Roma, 54 - 47035 Gambettola (FC) - Italy Copy of marking plate The artwork below may be only a draft. The use of certification marks on a product must be authorized by the respective NCBs that own these marks. where: PCB03.02.99 is the product version N°: 778107 is the serial number 10/02/2025 is the production date R 1.0 is the hardware revision QR code include all previous data listed Test Report No. AR25-0115794-01 Date: 2026-07-20 Page 6 of 97 Mod. TRF 3712 / 3 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY Type of equipment Electronic board Operating frequency: 915-926 MHz (see list of channels below) Maximum RF conducted power: 13 dBm (20 mW) Maximum RF radiated power: 25 dBm (316 mW) with external antenna model Ponal-D4 Modulation: 4GFSK Channel Spacing: 200 kHz Number of channels 50 Transmission mode FHSS Antenna: External antenna models: Ponal-D4. Gain: 12 dBi Ora-5-915 MHz. Gain: 5 dBi Ora-6.5-915 MHz. Gain: 6.5 dBi Levanter-L 868-LTE. Gain: 2.15 dBi List of used frequencies: CH. Frequency CH. Frequency CH. Frequency CH. Frequency CH. Frequency 1 915600000 2 915800000 3 916000000 4 916200000 5 916400000 6 916600000 7 916800000 8 917000000 9 917200000 10 917400000 11 917600000 12 917800000 13 918000000 14 918200000 15 918400000 16 918600000 17 918800000 18 919000000 19 919200000 20 919400000 21 919600000 22 919800000 23 920000000 24 920200000 25 920400000 26 920600000 27 920800000 28 921000000 29 921200000 30 921400000 31 921600000 32 921800000 33 922000000 34 922200000 35 922400000 36 922600000 37 922800000 38 923000000 39 923200000 40 923400000 41 923600000 42 923800000 43 924000000 44 924200000 45 924400000 46 924600000 47 924800000 48 925000000 49 925200000 50 925400000 Test Report No. AR25-0115794-01 Date: 2026-07-20 Page 7 of 97 Mod. TRF 3712 / 3 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 4. TEST CONFGURATION OF UNIT UNDER TEST EUT PORTS Port Description length (m) Enclosur…

Text truncated - open the document above for the full version.

ANT S.r.l. Via della Concordia, 4 – 37036 S. Martino B/A (VR) - Italia Tel. +39 045 8781380 Fax +39 045 8795335 e-mail: [email protected] www.antsrl.eu DESCRIPTION 868 MHz sectoral antenna suitable for applications 868/915MHz (LoRa, LoRaWAN, Sigfox, ISM) Ponal-D4 Ponal-D2 P/N: P10-013 P/N: P10-016 ELECTRICAL DATAMECHANICAL DATA Frequency range: Impedance: V.S.W.R. at 863-870 MHz: Max power: Polarisation: Radiation: Gain Ponal D2: Gain Ponal D4: Tilt: Beamwidth (-3dB E-plane) Ponal D2: Beamwidth (-3dB H-plane) Ponal D2: Beamwidth (-3dB E-plane) Ponal D4: Beamwidth (-3dB H-plane) Ponal D4: 868 MHz 50 Ω < 2 : 1 100 W Linear See patterns > 8dBi > 12dBi Mechanical 37° 120° 18° 120° Dimensions (approx) Ponal D2: Dimensions (approx) Ponal D4 Connection: Operating temperature range: Weight (approx) Ponal D2: Weight (approx) Ponal D4: Radome material: Radiating element material: Supports: Tilt: 550x150x130 mm 1050x150x130 mm N socket (other on request) -30° / +80°C 5.50 kg 7.50 kg Polyamide Copper Stainless steel mechanical 0, +2, +4, +6, +8° Protection against oxydation: The antenna is designed to withstand the worst climatic conditions and so that the oxydation of its parts is prevented, withits components being made of raw materials resistant to external environmental agents. Protection against accidental hits: The antenna is designed so that persons are protected from accidental hits against ots projecting parts, without any sharp edges RoHS Directive: The antenna complies with the RoHS Directive and its susequent. MOUNTING INSTRUCTIONS: Mounting on pole: please use the supplied mounting kit Mounting on wall: please use the supplied mounting kit ANT S.r.l. si riserva di apportare modifiche e miglioramenti in qualsiasi momento senza obbligo di preavviso ANT S.r.l. reserves the right to change or improve this documentation at all times and without notice. ENG-Rev.0 ANT S.r.l. Via della Concordia, 4 – 37036 S. Martino B/A (VR) - Italia Tel. +39 045 8781380 Fax +39 045 8795335 e-mail: [email protected] www.antsrl.eu DESCRIPTION 868 MHz sectoral antenna suitable for applications 868/915MHz (LoRa, LoRaWAN, Sigfox, ISM) Ponal-D4 Ponal-D2 P/N: P10-013 P/N: P10-016 Radiating patterns - Ponal D4 3D radiating pattern VSWR (Ponal D4)H-PlaneE-Plane ANT S.r.l. si riserva di apportare modifiche e miglioramenti in qualsiasi momento senza obbligo di preavviso ANT S.r.l. reserves the right to change or improve this documentation at all times and without notice. ENG-Rev.0 ANT S.r.l. Via della Concordia, 4 – 37036 S. Martino B/A (VR) - Italia Tel. +39 045 8781380 Fax +39 045 8795335 e-mail: [email protected] www.antsrl.eu DESCRIPTION 868 MHz sectoral antenna suitable for applications 868/915MHz (LoRa, LoRaWAN, Sigfox, ISM) Ponal-D4 Ponal-D2 P/N: P10-013 P/N: P10-016 Radiating pattern - Ponal D2 3D radiating pattern VSWR (Ponal D2)H-PlaneE-Plane ITS NAME: Ponal is a strong summer wind blowing mornings and evenings from Ledro valley through the bed of the Ponale creek, to which it owes its name. ANT S.r.l. si riserva di apportare modifiche e miglioramenti in qualsiasi momento senza obbligo di preavviso ANT S.r.l. reserves the right to change or improve this documentation at all times and without notice. ENG-Rev.0

ANT S.r.l. Via della Concordia, 4 – 37036 S. Martino B/A (VR) - Italia Tel. +39 045 8781380 Fax +39 045 8795335 e-mail: [email protected] www.antsrl.eu DESCRIZIONE Antenna multibanda 1/2 onda con base isolata Antenna omnidirezionale con elementi radianti isolati rispetto all’esterno del radome dell’antenna. idonea per applicazioni 868/915MHz (LoRa, LoRaWAN, Sigfox, ISM), GSM- GPRS 900/1800MHz, 3G-UMTS 2100MHz, WiFi 2,4GHz, 4G-LTE/5G (Band 1, 2, 3, 5, 7, 8, 20, 77, 78) Levanter-L 868-LTE (senza staffa cavo 0.5m) Levanter-L-ST 868-LTE (con staffa cavo 3m) Levanter-L-ST 868-LTE (con staffa cavo 5m) P/N: B21-006 P/N: B23-005 P/N: B23-007 CARATTERISTICHE ELETTRICHECARATTERISTICHE MECCANICHE Banda di frequenza Impedenza: V.S.W.R. 790-960 MHz: V.S.W.R. 1710-2170 MHz: V.S.W.R. 2400-2690 MHz: V.S.W.R. 3300-3800 MHz: Potenza massima: Polarizzazione: Radiazione: Guadagno: Apertura fascio (-3dB piano E) Apertura fascio (-3dB piano H) 790-960/1710-2170/ 2400-2690/3300-3800MHz 50 Ω < 2,8: 1 < 2 : 1 < 2 : 1 < 2 : 1 10 W Lineare Omnidirezionale 2,15 dBi Vedi diagrammi Vedi diagrammi Dimensioni (approssimativo): Connessione: Cavo: Temperatura operativa: Peso (approssimativo): Materiale elemento radiante: Materiale viteria: Grado IP: Staffa: Ø30x200 mm SMA maschio (altri a richiesta) lowloss Ø5mm 3 o 5 m (altri a richiesta) -35° / +80°C 0.050 kg Rame Acciaio inox IP67 Solo su modello Levanter-L-ST INSTALLAZIONE SU BOX INSTALLAZIONE SU MUROINSTALLAZIONE SU PALO Antenna Isolata: L'antenna è galvanicamente isolata dal supporto d’installazione (box, palo o muro) sulla quale è montata. Antenna a tenuta stagna: L'antenna è IP67 anche quando installata direttamente su box/contenitore del cliente. Protezione contro ossidazioni: Questa antenna è progettata per resistere alle condizioni climatiche sfavorevoli e contro l’ossidazione dei suoi componenti; i componenti plastici sono prodotti con materia prima resistente agli agenti esterni. Protezione contro urti accidentali: Questa antenna è progettata per proteggere le persone contro urti accidentali contro le parti sporgenti, tutti gli spigoli dell’antenna e della staffa di installazione sono arrotondati. Direttiva RoHS: L’antenna è conforme alla Direttiva RoHS e successivi aggiornamenti ISTRUZIONI DI MONTAGGIO: Su contenitore/box: - Forare il contenitore con foro Ø13 mm, massimo spessore di installazione 6 mm (spessori > 6mm => su richiesta) Su Palo: - Fissare la staffa tramite fascetta inox. La staffa è predisposta per fascetta di altezza 9mm Su Muro: - Fissare la staffa tramite inserti fisher. ATTENZIONE: L’antenna è isolata da piano di installazione ma le prestazioni possono comunque essere influenzate dagli elementi metallici e non metallici posti in prossimità dell’antenna ANT S.r.l. si riserva di apportare modifiche e miglioramenti in qualsiasi momento senza obbligo di preavviso ANT S.r.l. reserves the right to change or improve this documentation at all times and without notice. ITA-Rev. 1 ANT S.r.l. Via della Concordia, 4 – 37036 S. Martino B/A (VR) - Italia Tel. +39 045 8781380 Fax +39 045 8795335 e-mail: [email protected] www.antsrl.eu DESCRIZIONE Antenna multibanda 1/2 onda con base isolata Antenna omnidirezionale con elementi radianti isolati rispetto all’esterno del radome dell’antenna. idonea per applicazioni 868/915MHz (LoRa, LoRaWAN, Sigfox, ISM), GSM- GPRS 900/1800MHz, 3G-UMTS 2100MHz, WiFi 2,4GHz, 4G-LTE/5G (Band 1, 2, 3, 5, 7, 8, 20, 77, 78) Levanter-L 868-LTE (senza staffa cavo 0.5m) Levanter-L-ST 868-LTE (con staffa cavo 3m) Levanter-L-ST 868-LTE (con staffa cavo 5m) P/N: B21-006 P/N: B23-005 P/N: B23-007 V.S.W.R. (misura con cavo 5m) Diagrammi di radiazione Diagramma di radiazione 3DPiano HPiano E 850 MHz -30 -27 -24 -21 -18 -15 -12 -9 -6 -3 0 -30 -27 -24 -21 -18 -15 -12 -9 -6 -3 0 ANT S.r.l. si riserva di apportare modi…

Text truncated - open the document above for the full version.