2BN58-SPC4-720-DL720R Gateway

VALLEY FORGE & BOLT MANUFACTURING CO. 4410 West Jefferson Street, Phoenix, AZ 85043 P (602) 269-5748 i F (602) 269-7851 www°.vfolts.com I ISO 9001 :2i)I ('I;RI1[I[IJ Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-23-2025 Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist §2.911(d)(5)(i)(ii) of the FCC rules Applicant: Valley Forge & Bolt Manufacturing Co. FCC ID: 2BN58-SPC4-720-DL and 47 CFR parts §2.903 and To whom it may concern, Valley Forge & Bolt Manufacturing Co. ("Applicant') certifies that the equipment for which authorization is sought is not "covered" equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing "covered" equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. Applicant further certifies that no Cybersecurity or anti -virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti -virus software is installed in the equipment being certified. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Compliance Testing LLC if there is any change in the status identified above. Byron Harrod CFO Valley Forge & Manufacturing CO. 09-23-2025

VALLEY FORGE & BOLT MANUFACTURING CO. 4410 West Jefferson Street, Phoenix, AZ 85043 P (602) 269-5748 F (602) 269-7851 www.vfbolts.com ISO 90W : 201 UI.RTll lLD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mil ls Road Columbia, MD 21046 USA Date: 09-16-2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2BN58 Val ley Forge & Bolt Manufacturing Co. ("the applicant") certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0036767168 Name: Val ley Forge & Bolt Manufacturing Co. Address: 4410 W Jefferson, Phoenix AZ 85043 Contact Person: Byron Harrod Tel.: 602-269-5748 ext 238 Email: [email protected] Sincerely, Byron Harrod, CFO Valley Forge & Bolt Manufacturing CO.

VALLEY FORGE & BOLT MANUFACTURING CO. 4410 West Jefferson Street, Phoenix, AZ 85043 P (602) 269-5748 F (602) 269-7851 www.vfbolts.com ISO 9001 : 2015 ('11t 1 1F1ED September 16, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti -Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Byron Harrod CFO Valley Forge & Bolt Manufacturing CO.

VALLEY FORGE & BOLT MANUFACTURING CO. 4410 West Jefferson Street, Phoenix, AZ 85043 P (602) 269-5748 F (602) 269-7851 www.vfbolts.com ISo 9001 : 2015 CERTIFIED September 16, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mil ls Road Columbia, Maryland 21046 RE: Long-Term Confidentiality Request for SPC4® 720R Gateway, 2BN58-SPC4-720-DL To Whom It May Concern: This letter serves as an official request for confidentiality under § 0.457(d) and § 0.459 of CFR 47. We have requested that the following documents required to be submitted with this application be permanently withheld from public review. • Block Diagram • Schematics Theory of Operation Tune Up Procedure Parts List/BOM These documents contain detai led system and equipment descriptions and related information about the product, which manufacturer/applicant considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, manufacturer/applicant feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Byron Harrod CFO Valley Forge & Bolt Manufacturing CO.

VALLEY FORGE & BOLT MANUFACTURING CO. 4410 West Jefferson Street, Phoenix, AZ 85043 P (602) 269-5748 F (602) 269-7851 www.vfbolts.com I ISO 9001 : 2015 C'ERT II IED September 16, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short -Term Confidentiality Request for: SPC4® 720R Gateway, 2BN58-SPC4-720-DL To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, Valley Forge & Bolt Manufacturing requests Short-Term Confidentiality for the following exhibits of this application for a period of 180 days after grant is issued: • Test setup photos • External photos • Internal photos User's manual These documents contain detailed system and equipment descriptions and related information about the product, which manufacturer/applicant considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, manufacturer/applicant feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Grantee will not market or distribute product during the Short -Term Confidentiality period requested. When the device is ready to be marketed the grantee will inform the TCB to release the Short-Term Confidentiality. Please contact me if there is any information you may need. Sincerely, Byron F[ärrod CFO Valley Forge & Bolt Manufacturing CO.

Valley Forge & Bolt Manufacturing Co. 4410 West Jefferson Street, Phoenix, AZ 85043-3915 • Web Site – http://www.vfbolts.com Phone (602) 269-5748 / Fax (602) 269-7951 10 & 11 720 Gateway Label & Location New Label Label Type White laser print on anodized black aluminum. Label Location

DATA AND DEVICES / TRA9023 TRA9023 Phantom Antennas 902-928 MHz FEATURESMARKETS - APPLICATIONS • Mechanically robust for both indoor and outdoor applications • NMO mount and vandal resistant permanent mount option • IP67 rated for dust intrusion and temporary water immersion • RoHS tested and compliant components • Cellular • GSM and PCS • Wi-Fi • 802.11 • Bluetooth wireless applications The patented Laird Connectivity Phantom® is a tough low-profile antenna for outdoor or indoor applications. Measuring only 2.3” tall, the Phantom 902-928 MHz antenna is designed and performance engineered with vertical polarization components. This antenna provides frequency agility, low visibility, and a low angle radiation pattern that delivers superior performance in challenging application environments. The industry standard NMO mounting socket mates with all Laird Connectivity magnetic, trunk lid, and hole mounts. Also available is optional threaded permanent stud mount model that is vandal resistant for mounting on brackets, panels, ceilings, or any other kind of housing. The patented Phantom® antenna technology is beneficial when high performance is desired and extreme ruggedness and low profile is required. DATA AND DEVICES / TRA90232 ELECTRICAL SPECIFICATIONS Model NameTRA9023 Operating Frequency (MHz)902-928 VSWR<2.0:1 Gain (dBi)3.0 Nominal Impedance (Ohms)50 Max Power - Ambient 25°C (W)100 PolarizationVertical Radiation PatternOmnidirectional Vertical Plane 3 dB Beamwidth360° Horizontal Plane 3 dB Beamwidth78° MECHANICAL SPECIFICATIONS Dimensions – H x D – mm (inches)58.42 x 36.6 (2.3 x 1.44) Weight – g (lbs.) TRA9023N: 184 (0.405) TRA9023NP: 240 (0.529) ColorBlack/Black Chrome or White/Chrome ENVIRONMENTAL SPECIFICATIONS Operating Environment (Indoor or Outdoor)Indoor or outdoor Operating Temperature – °C (°F)-40 to +85°C (-40 to +185°F) Storage Temperature – °C (°F)-45 to +85°C (-49 to +185°F) Wind Rating – km/hr (mph)282 (175) Ingress Protection RatingIP67 Material Substance ComplianceRoHS PART NUMBERMOUNTINGCOMMENTS TRA9023NMO Mount- TRA9023PPermanent Stud Mount- TRA9023NNMO MountNo ground plane required TRA9023NPPermanent Stud MountNo ground plane required CONFIGURATION DATA AND DEVICES / TRA90233 RADIATION PATTERNS 910 MHz 902 MHz DATA AND DEVICES / TRA9023 USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 TE TECHNICAL SUPPORT CENTER te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. TE warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and limitations TE will, at its option, either repair or replace any part of its products that prove defective because of improper workmanship or materials. This limited warranty is in force for the useful lifetime of the original end product into which the TE product is installed. Useful lifetime of the original end product may vary but is not to exceed five (5) years from the original date of the end product purchase. ©2021 TE Connectivity. All Rights Reserved. 11/21 Original 928 MHz

P2510011_FCC_MPE_Rev 1.0 Page 1 of 5 Test Report Prepared for: Valley Forge & Bolt Manf Model: SPC4-720-DL Serial Number: NA Project No: p2510011 FCC ID: 2BN58-SPC4-720-DL Test Results: Pass To FCC Part 1.1310 FCC Part 1.1307 Date of Issue: September 22, 2025 On the behalf of the applicant: Valley Forge & Bolt Manf 4410 W Jefferson Street Phoenix, AZ, 85043 Attention of: Dirk Halley, Projects engineering Manager Ph: (602) 269-5748 E-Mail: [email protected] Prepared By Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com Project No: p2510010 John Michalowicz Project Test Engineer This report may not be reproduced, except in f ull, without written permission f rom Compliance Testing All results contained herein relate only to the sample tested P2510011_FCC_MPE_Rev 1.0 Page 2 of 5 Test Report Revision History Revision Date Revised By Reason for Revision 1.0 September 22, 2025 John Michalowicz Original Document P2510011_FCC_MPE_Rev 1.0 Page 3 of 5 ANAB Compliance Testing, LLC, has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2017. This accreditation demonstrates technical competence f or a def ined scope and the operation of a laboratory quality management system (ref er to the joint ISO-ILAC-IAF Communiqué dated January 2009). The tests results contained within this test report all fall within our scope of accreditation, unless noted below. Please ref er to http://www.compliancetesting.com/labscope.html f or current scope of accreditation. FCC Site Reg. #750616 IC Site Reg. #2044A-2 Non-accredited tests contained in this report: N/A EUT Description Model: SPC4-720 Gateway Serial: 23-w69929-1 Firmware: RFGateway_1.16 Software: NA Description: 915 MHz Gateway Additional Information: Radio Frequency Range and Operational Info: 902 – 928 MHz, 55.5kbps Usage: Fixed-Use/Mobile Receipt of Sample(s): March 14 th , 2025 EUT Condition: Visual Damage No State of Development Production/Production Equivalent P2510011_FCC_MPE_Rev 1.0 Page 4 of 5 Average Power calculations Average Power = Peak Power * duty-cycle% Tuned Frequency (MHz) Radiated Peak Output Power (mW) Duty Cycle (%) Average Power (mW) 902.5 47.86 100 47.86 P2510011_FCC_MPE_Rev 1.0 Page 5 of 5 MPE Evaluation This is a f ixed device used in Uncontrolled Exposure environment. Limits Uncontrolled Exposure 47 CFR 1.1310 Table 1, (B) 0.3-1.34 MHz: Limit [mW/cm²] = 100 1.34-30 MHz: Limit [mW/cm²] = (180/f ²) 30-300 MHz: Limit [mW/cm²] = 0.2 300-1500 MHz: Limit [mW/cm²] = f /1500 1500-100,000 MHz Limit [mW/cm²] = 1.0 Test Data Test Frequency, MHz 902.5 Power, Radiated, mW (P) 47.86 Antenna Gain Isotropic 3 dBi Antenna Gain Numeric (G) 2.0 Antenna Type Flex Monopole Distance (R) 20 cm 푆= 푃∗퐺 4휋푟 2 Power Density (S) mw/cm 2 0.0095495782 Power Density (S) =0.0095495782 Limit = (f rom above table) = 1.0 Note: Max output power value is obtained from associated report. The output power of the EUT complies with the MPE requirements at 20cm distance. END OF TEST REPORT

P2510011_FCC_Part 15.247_Rev 1.0 Page 1 of 39 Test Report Prepared for: Valley Forge & Bolt Manf Model: SPC4-720-DL Serial Number: 23-w69929-1 Project No: p2510011 FCC ID: 2BN58-SPC4-720-DL Test Results: Pass To FCC Part 15.247 and RSS-247: Issue 3 (August 2023) Date of Issue: May 5, 2025 On the behalf of the applicant: Valley Forge & Bolt Manf 4410 W Jefferson St Phoenix, AZ, 85043 Attention of: Dirk Halley, Projects Engineering Manager Ph: (602)269-5748 E-Mail: [email protected] Prepared By: Compliance Testing, LLC Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com ANAB Cert#: AT-2901 FCC Site Reg. #US2901 ISED Site Reg. #2044A-2 Reviewed / Authorized By: John Michalowicz, Test Engineer This report may not be reproduced, except in full, without written permission from Compliance Testing. All results contained herein relate only to the sample tested. All samples were selected by the customer. P2510011_FCC_Part 15.247_Rev 1.0 Page 2 of 39 Test Results Summary Test Date Range: March 28 th , 2025 – May 2 nd , 2025 Specification Test Name Pass, Fail, N/A Comments FCC RSS 15.247(b) Section 5.4(d) Output Power Pass 15.247(d) Section 5.5 Conducted Spurious Emissions Pass 15.247(d), 15.209(a), 15.205 Section 5.5 / RSS-GEN Section 8.9 Radiated Spurious Emissions Pass 15.247(d), 15.209(a), 15.205 Section 5.5 Emissions At Band Edges Pass 15.247(a)(2) Sections 5.2(a) Occupied Bandwidth Pass 15.247(e) Section 5.2(b) Transmitter Power Spectral Density Pass 15.207 RSS-GEN Section 8.8 A/C Powerline Conducted Emissions N/A The EUT is powered by a replaceable battery Method Deviations/Additions: No Statements of conformity are reported as: • Pass - the measured value is below the acceptance limit, acceptance limit = test limit. • Fail - the measured value is above the acceptance limit, acceptance limit = test limit. References/Methods Description ANSI C63.4-2014 Method and Measurements of Radio-Noise Emissions from low-Voltage Electrical and Electronic Equipment in the range 9kHz to 40GHz. ANSI C63.10:2020 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices 558074 D01 15.247 Meas Guidance v05r02 Guidance for Compliance Measurements on DTS, FHSS, and Hybrid System Devices Operating Under Section 15.247 of the FCC Rules ISO/IEC 17025:2017 General requirements for the Competence of Testing and Calibrations Laboratories P2510011_FCC_Part 15.247_Rev 1.0 Page 3 of 39 Table of Contents Description Page Test Results Summary ........................................................................................................................ 2 Test Report Revision History .............................................................................................................. 4 EUT Description .................................................................................................................................. 5 Test and Measurement Data ............................................................................................................... 7 Test Setup and Modes of Operation ................................................................................................... 8 Output Power .................................................................................................................................... 10 Radiated Spurious Emissions ........................................................................................................... 13 Conducted RF Measurements (15.209) ............................................................................................ 23 Emissions at Band Edges ................................................................................................................. 27 DTS Bandwidth ................................................................................................................................. 29 Transmitter Power Spectral Density (PSD) ....................................................................................... 33 Measurement Uncertainty ................................................................................................................. 39 P2510011_FCC_Part 15.247_Rev 1.0 Page 4 of 39 Test Report Revision History Revision Date Revised By Reason for Revision 1.0 May 5, 2025 John Michalowicz Original Document Current revision of the test report replaces any prior versions. Only the current version of the test report is valid. P2510011_FCC_Part 15.247_Rev 1.0 Page 5 of 39 EUT Description Model: SPC4-720 Gateway Serial: 23-w69929-1 Firmware: RFGateway_1.16 Software: NA Description: 915 MHz Gateway Additional Information: Radio Frequency Range and Operational Info: 902 – 928 MHz, 55.5kbps Usage: Fixed-Use/Mobile Receipt of Sample(s): March 14 th , 2025 EUT Condition: Visual Damage No State of Development Production/Production Equivalent P2510011_FCC_Part 15.247_Rev 1.0 Page 6 of 39 The applicant has been cautioned as to the following 15.21 - Information to User The user’s manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.27(a) - Special Accessories Equipment marked to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer without an additional charge. Informati…

Text truncated - open the document above for the full version.