2BN84-AC201LED projector

Shenzhen Aocai Technology Co., LTD & 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: September 15, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BN84-AC201 Shenzhen Aocai Technology Co., LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Deng FeiYue Title: General Manager Address: 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen, China Tel.: 159 9006 2360 Email: [email protected]

Shenzhen Aocai Technology Co., LTD & 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen, China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Sep. 15, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2BN84-AC201] Product Name: [LED projector] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature: Printed Name: Deng FeiYue Title: General Manager Address: 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen, China Tel.: 159 9006 2360 Email: [email protected] Shenzhen Aocai Technology Co., LTD & 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☐ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☒ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 Apr11 2025_10:04:27_6 1_AAO_AC201XS _V1.3.4 Shenzhen Aocai Technology Co., LTD 2 3

Shenzhen Aocai Technology Co., LTD 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen China Date: 9/11/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BN84-AC201 FRN: 0036791275 US Agent – Attestation Statement / Part 2.911(d)(7) Shenzhen Aocai Technology Co., LTD certifies, that as of [9/11/2025], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BN84-AC201 Shenzhen Aocai Technology Co., LTD, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Shenzhen Aocai Technology Co., LTD for FCC ID: 2BN84-AC201 Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Shenzhen Aocai Technology Co., LTD Address: 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen Designated Agent: FCC US Agent, LLC Company Representative: Deng FeiYue Designated Agent Representative: Tim Payne Signature: Email: [email protected] Tel: 159 9006 2360 Signature:

Shenzhen Aocai Technology Co., LTD & 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen, China September 15, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BN84-AC201 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely, (Signature) Title: Deng FeiYue Address: 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen, China Tel.: 159 9006 2360 Email: [email protected]

Shenzhen Aocai Technology Co., LTD & 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen, China (September 15, 2025) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BN84-AC201 I, the undersigned, hereby authorize (Shenzhen Alpha Product Testing Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen Alpha Product Testing Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Shenzhen Aocai Technology Co., LTD We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Full name of contact person listed on FCC’s website): Deng FeiYue (Title): General Manager Tel: 159 9006 2360 Fax: 159 9006 2360 Email: [email protected]

FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201

Label Location

FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 BT ANT 2.4 WIFI&5G WIFI ANT FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201 FCC ID: 2BN84-AC201

FCC ID: 2BN84-AC201 Prediction of MPE at a given distance 1. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) 2. Test Procedure Equation from page 18 of OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to the antenna G = numeric gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna FCC ID: 2BN84-AC201 3. Result Mode Frequency (MHz) Prediction distance (cm) Rated Peak RF power output MPE (mW/cm 2 ) Limit (mW/cm 2 ) SAR Test Exclusio n dBm mW 2.4G WIFI 2452 20 14.05 25.4097 0.01502 1 Yes EDR 2441 20 0.706 1.1765 0.00070 1 Yes BLE 2440 20 4.59 2.8774 0.00170 1 Yes 5G WIFI 5190 20 14.773 30.0123 0.02286 1 Yes Use distance is 20cm, Maximum Simultaneous transmission MPE Ratios for BLE+WIFI: Max MPE ratio BLE /Limit Max MPE ratio WIFI /Limit ∑MPE ratios Limit Result 0.00170 0.02286 0.02456 1 PASS 2.4G WiFi&BT Antenna Gain: 4.73dBi, 2.97(numeric) 5G WiFi Antenna Gain: 5.83dBi, 3.83(numeric) Then SAR evaluation is not required.

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 4008-3008-95 Website: http://www.a-lab.cn FCC TEST REPORT FCC ID: 2BN84-AC201 On Behalf of Shenzhen Aocai Technology Co., LTD LED projector Model No.: AC201 Prepared for : Shenzhen Aocai Technology Co., LTD Address : 701, Building A9, Longwangmiao Industrial Building, East Baishisha Community, Fuyong Street, Baoan District, Shenzhen Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China Report Number : A2508189-C04-R02 Date of Receipt : August 18, 2025 Date of Test : August 18, 2025 - September 8, 2025 Date of Report : September 8, 2025 Version Number : V0 Test Result : Pass Page 2 of 79 Report No.: A2508189-C04-R02 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results ............................................................................................ 6 1.1. Description of Standards and Results ..................................................................................... 6 2. General Information........................................................................................................................ 7 2.1. Description of Device (EUT) .................................................................................................... 7 2.2. Accessories of Device (EUT) .................................................................................................. 8 2.3. Tested Supporting System Details .......................................................................................... 8 2.4. Block Diagram of connection between EUT and simulators ................................................... 8 2.5. Test Mode Description ............................................................................................................. 8 2.6. Test Conditions ........................................................................................................................ 9 2.7. Test Facility .............................................................................................................................. 9 2.8. Measurement Uncertainty ....................................................................................................... 9 2.9. Test Equipment List ............................................................................................................... 10 3. Maximum Peak Output power ..................................................................................................... 12 3.1. Limit ....................................................................................................................................... 12 3.2. Test Procedure ...................................................................................................................... 12 3.3. Test Setup .............................................................................................................................. 12 3.4. Test Result ............................................................................................................................. 12 4. Bandwidth ..................................................................................................................................... 13 4.1. Limit ....................................................................................................................................... 13 4.2. Test Procedure ...................................................................................................................... 13 4.3. Test Result ............................................................................................................................. 13 5. Carrier Frequency Separation ..................................................................................................... 24 5.1. Limit ....................................................................................................................................... 24 5.2. Test Procedure ...................................................................................................................... 24 5.3. Test Result ............................................................................................................................. 24 6. Number Of Hopping Channel ...................................................................................................... 26 6.1. Limit ....................................................................................................................................... 26 6.2. Test Procedure ...................................................................................................................... 26 6.3. Test Result ............................................................................................................................. 26 7. Dwell Time ..................................................................................................................................... 28 7.1. Test limit ................................................................................................................................. 28 7.2. Test Procedure ...................................................................................................................... 28 7.3. Test Result ............................................................................................................................. 28 8. Radiated emissions ...................................................................................................................... 38 8.1. Limit ....................................................................................................................................... 38 8.2. Block Diagram of Tes…

Text truncated - open the document above for the full version.

Page 50 of 79 Report No.: A2508189-C04-R02 Tx. Spurious NVNT 2-DH5 2402MHz Ant1 Ref Tx. Spurious NVNT 2-DH5 2402MHz Ant1 Emission Page 51 of 79 Report No.: A2508189-C04-R02 Tx. Spurious NVNT 2-DH5 2441MHz Ant1 Ref Tx. Spurious NVNT 2-DH5 2441MHz Ant1 Emission Page 52 of 79 Report No.: A2508189-C04-R02 Tx. Spurious NVNT 2-DH5 2480MHz Ant1 Ref Tx. Spurious NVNT 2-DH5 2480MHz Ant1 Emission Page 53 of 79 Report No.: A2508189-C04-R02 Tx. Spurious NVNT 3-DH5 2402MHz Ant1 Ref Tx. Spurious NVNT 3-DH5 2402MHz Ant1 Emission Page 54 of 79 Report No.: A2508189-C04-R02 Tx. Spurious NVNT 3-DH5 2441MHz Ant1 Ref Tx. Spurious NVNT 3-DH5 2441MHz Ant1 Emission Page 55 of 79 Report No.: A2508189-C04-R02 Tx. Spurious NVNT 3-DH5 2480MHz Ant1 Ref Tx. Spurious NVNT 3-DH5 2480MHz Ant1 Emission Page 56 of 79 Report No.: A2508189-C04-R02 10. BAND EDGE COMPLIANCE 10.1.Block Diagram of Test Setup 10.2.Limit Please refer section 15.247. 10.3.Test Procedure Details see the KDB 558074 D01 15.247 Meas Guidance v05r02 10.3.1 Put the EUT on a 0.8m high table, power on the EUT. Emissions were scanned and measured rotating the EUT to 360 degrees, Find the maximum Emission 10.3.2 Check the spurious emissions out of band. 10.3.3 RBW 1MHz, VBW 3MHz, peak detector for peak value, RBW 1MHz, VBW 3MHz, RMS detector for AV value. All restriction band and non- restriction band have been tested, only worse case is reported. 10.4.Test Result PASS. (See below detailed test data) Page 57 of 79 Report No.: A2508189-C04-R02 Test Mode: GFSK-Low Hopping-off Test Mode: GFSK-High Hopping-off Test Mode: GFSK-Low Hopping-on Test Mode: GFSK-High Hopping-on Note: 1. *:Maximum data; x:Over limit; !:over margin. 2.Measurement=Reading Level+Correct Factor; Correct Factor=Antenna Factor+Cable Loss. Page 58 of 79 Report No.: A2508189-C04-R02 Test Mode: π/4 DQPSK-Low Hopping-off Test Mode: π/4 DQPSK-High Hopping-off Test Mode: π/4 DQPSK-Low Hopping-on Test Mode: π/4 DQPSK-High Hopping-on Note: 1. *:Maximum data; x:Over limit; !:over margin. 2.Measurement=Reading Level+Correct Factor; Correct Factor=Antenna Factor+Cable Loss. Page 59 of 79 Report No.: A2508189-C04-R02 Test Mode: 8DPSKLow Hopping-off Test Mode: 8DPSK-High Hopping-off Test Mode: 8DPSK-Low Hopping-on Test Mode: 8DPSK-High Hopping-on Page 60 of 79 Report No.: A2508189-C04-R02 11. BAND EDGE (CONDUCTED) 11.1.Block diagram of test setup 11.2.Test limits In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. 11.3.Test Procedure Details see the KDB 558074 D01 15.247 Meas Guidance v05r02 Place the EUT on the table and set it in transmitting mode. 11.3.1. Place the EUT on the table and set it in transmitting mode. 11.3.2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 11.3.3. Set the spectrum analyzer as RBW=100KHz, VBW=300KHz, Sweep = auto. 11.3.4. Repeat above procedures until all frequency measured were complete.. Page 61 of 79 Report No.: A2508189-C04-R02 11.4.Test Results Pass Band Edge NVNT 1-DH5 2402MHz Ant1 No-Hopping Ref Band Edge NVNT 1-DH5 2402MHz Ant1 No-Hopping Emission Page 62 of 79 Report No.: A2508189-C04-R02 Band Edge NVNT 1-DH5 2480MHz Ant1 No-Hopping Ref Band Edge NVNT 1-DH5 2480MHz Ant1 No-Hopping Emission Page 63 of 79 Report No.: A2508189-C04-R02 Band Edge NVNT 2-DH5 2402MHz Ant1 No-Hopping Ref Band Edge NVNT 2-DH5 2402MHz Ant1 No-Hopping Emission Page 64 of 79 Report No.: A2508189-C04-R02 Band Edge NVNT 2-DH5 2480MHz Ant1 No-Hopping Ref Band Edge NVNT 2-DH5 2480MHz Ant1 No-Hopping Emission Page 65 of 79 Report No.: A2508189-C04-R02 Band Edge NVNT 3-DH5 2402MHz Ant1 No-Hopping Ref Band Edge NVNT 3-DH5 2402MHz Ant1 No-Hopping Emission Page 66 of 79 Report No.: A2508189-C04-R02 Band Edge NVNT 3-DH5 2480MHz Ant1 No-Hopping Ref Band Edge NVNT 3-DH5 2480MHz Ant1 No-Hopping Emission Page 67 of 79 Report No.: A2508189-C04-R02 Band Edge(Hopping) NVNT 1-DH5 2402MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 1-DH5 2402MHz Ant1 Hopping Emission Page 68 of 79 Report No.: A2508189-C04-R02 Band Edge(Hopping) NVNT 1-DH5 2480MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 1-DH5 2480MHz Ant1 Hopping Emission Page 69 of 79 Report No.: A2508189-C04-R02 Band Edge(Hopping) NVNT 2-DH5 2402MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 2-DH5 2402MHz Ant1 Hopping Emission Page 70 of 79 Report No.: A2508189-C04-R02 Band Edge(Hopping) NVNT 2-DH5 2480MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 2-DH5 2480MHz Ant1 Hopping Emission Page 71 of 79 Report No.: A2508189-C04-R02 Band Edge(Hopping) NVNT 3-DH5 2402MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 3-DH5 2402MHz Ant1 Hopping Emission Page 72 of 79 Report No.: A2508189-C04-R02 Band Edge(Hopping) NVNT 3-DH5 2480MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 3-DH5 2480MHz Ant1 Hopping Emission Page 73 of 79 Report No.: A2508189-C04-R02 12. POWER LINE CONDUCTED EMISSIONS 12.1.Block Diagram of Test Setup 12.2.Limit Frequency Maximum RF Line Voltage Quasi-Peak Level dB(V) Average Level dB(V) 150kHz ~ 500kHz 66 ~ 56* 56 ~ 46* 500kHz ~ 5MHz 56 46 5MHz ~ 30MHz 60 50 Notes: 1. * Decreasing linearly with logarithm of frequency. 2. The lower limit shall apply at the transition frequencies. 12.3.Test Procedure (1) The EUT was placed on a non-metallic table, 80cm above the ground plane. (2) Setup the EUT and simulator as shown in 10.1 (3…

Text truncated - open the document above for the full version.

Shenzhen Nano-ant communication Spec. YG420-TP 2.4G/5.8GWIFI Techology Co., Ltd . Revision: S-1 Page 1 of 7 NanoAnt Confidential SZ Nano-Ant Co., Ltd. Tel: 0755-82928581 Nano-ant Product Specification I I I n n n t t t e e e r r r n n n a a a l l l a a a n n n t t t e e e n n n n n n a a a YING GUAN YG420-TP 2.4G/5.8GWIFI APPROVED BY SIGNATURE DATE Mechanical Engineer: Zhou Yang 2021-02-23 RF Engineer: Li Guodong 2021-02-23 Engineering Manager: Ri Jae-il 2021-02-23 Approved By Customer (as required): Shenzhen Nano-ant communication Spec. YG420-TP 2.4G/5.8GWIFI Techology Co., Ltd . Revision: S-1 Page 2 of 7 NanoAnt Confidential SZ Nano-Ant Co., Ltd. Tel: 0755-82928581 1.0 DESCRIPTIONS AND PART NUMBER; 1.1 DESCRIPTION; The antenna mounts to the housing of the projiector. And after that, the feed point on the prolongation of metal plate should firmly touch the contact provided on the PCB in the respective area. 1.2 PART NUMBER Part number Frequency Band HH Part Number SZ6023L 2.0 ELECTRICAL SPECIFICATIONS; 2.1 FREQUENCY BAND 2.2 IMPEDANCE - Nominal impedance: 50 2.3 ACTIVE TEST REPORT Test equipment E5071C Network Analyzer SG24 microwave anechoic chamber Shenzhen Nano-ant communication Spec. YG420-TP 2.4G/5.8GWIFI Techology Co., Ltd . Revision: S-1 Page 3 of 7 NanoAnt Confidential SZ Nano-Ant Co., Ltd. Tel: 0755-82928581 1 . Antenna matching circuit , Matching circuit No changes · 3.Passive test data Passive result The following figure shows the efficiency of 2.4G 5G antenna Shenzhen Nano-ant communication Spec. YG420-TP 2.4G/5.8GWIFI Techology Co., Ltd . Revision: S-1 Page 4 of 7 NanoAnt Confidential SZ Nano-Ant Co., Ltd. Tel: 0755-82928581 4.The following figure shows the Pattern of 2.4G 5G antenna Shenzhen Nano-ant communication Spec. YG420-TP 2.4G/5.8GWIFI Techology Co., Ltd . Revision: S-1 Page 5 of 7 NanoAnt Confidential SZ Nano-Ant Co., Ltd. Tel: 0755-82928581 3.0 MECHANICAL SPECIFICATIONS; 3.1 MECHANICAL CONFIGURATION The appearance of the antenna is in accordance with drawing 6023L 3.2 CONNECTOR TYPE The connector type is an embedded type 4.0 ENVIRONMENTAL SPECIFICATIONS 4.1 TEMPERATURE Operating Temperature Range: -40C～ +85C Storage Temperature Range: -40C～ +120C 4.2 SALT SPRAY TEST Antenna be exposed in a 35°C, 5% salt fog chamber for 24 hours then check the appearance and performance against the specifications in normal temperature. 4.3 STATIC HUMIDITY TEST The antenna is subjected to the following test: Temperatures: +70°C and 90%--95%RH Test Duration: 24 Hours The antenna should not undergo any structural or functional change and remain within the electrical/mechanical specification. 5.0 PACKAGING The antennas will be packed in bags, There are 100 or 200 antennas per bag. The bags are packed in corrugated fibreboard over box . Drawing Shenzhen Nano-ant communication Spec. YG420-TP 2.4G/5.8GWIFI Techology Co., Ltd . Revision: S-1 Page 6 of 7 NanoAnt Confidential SZ Nano-Ant Co., Ltd. Tel: 0755-82928581 Drawing ： Shenzhen Nano-ant communication Spec. YG420-TP 2.4G/5.8GWIFI Techology Co., Ltd . Revision: S-1 Page 7 of 7 NanoAnt Confidential SZ Nano-Ant Co., Ltd. Tel: 0755-82928581

FCC ID: 2BN84-AC201 1.1. Photos of Radiated emission FCC ID: 2BN84-AC201 1.2. Photos of Conducted Emission test