2BN9A-BT9000FM Mobile Radio

USER'S MANUAL Android Download for App Store Download for FM Mobile Radio Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBIITED UNDER FCC RULES AND FEDERRAL LAW. SAR tests are conducted using standard operating positions accepted by FCC with the device transmitting in all tested frequency bands, Before a new model is a available for sale, it must be tested and certified toÿÿ the FCC that is does not exceed the exposure limit established by the FCC. Tests for each product For body worn operation, this device has been tested andÿÿmeets the FCC RF exposure guidelines when used with and accessoryÿÿ designated for this product or when used with and accessory that contains no metal. To maintain compliance with FCC RF exposure guidelines hold the transmitter and antenna at least 1 inch(2.5 centimeters) from your face and speak in a normal voice,ÿÿwith the antenna pointed up and away from the face. The equipment complies with FCC radiation exposure limitsÿÿset forth for and Occupational /controlled environment. In order to comply with the FCC RF exposure requirement, the antenna installation must comply with following. Users must be fullyÿÿ aware of the hazards of the exposure and able to exercise control over their RF exposure to limits.Your wireless hand-held portable transceiver contains a power transmitter. This product sends outradio frequency (RF) signals when the Push-to-Talk(PTT) button is pressed.The device is authorized to operate at a duty factor not to exceed 50%. Disclaimer Although we have strived to ensure the accuracy and completeness of this manual, omissions or errors may still occur, for which our company assumes no liability. As technology and products continue to evolve, our company reserves the right to modify product designs and specifications at any time without prior notice. Reproduction, modification, translation, or distribution of this manual in any form is prohibited without our company’s prior written authorization. Any third-party product information referenced in this manual remains the property of the respective third parties. Our company makes no warranties regarding the accuracy, validity, or completeness of such content. Important Information Unauthorized changes or modifications to this device without explicit permission from our company may void your authorization to operate it. This radio is preset at the factory to transmit compliant modulated signals within designated frequency ranges. Any adjustment of frequencies or parameters beyond this authorized scope is illegal. Modifications to the device’s internal settings must be performed by qualified technical personnel. Before using this radio, please carefully read the following operational instructions regarding RF exposure and product safety to ensure safe usage. FCC Notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. authorityÿÿ to operate the equipment.This device complies with Part 15 of the FCC Rules. ! Any Changes or modifications not expressly approved by theÿÿ party responsible for compliance could void the user's are performed in positions and locationsÿÿ as required by the FCC. Note: Public can` not use this Amateur device. Battery Safety Precautions Charger Charging is strictly prohibited in the following situations to prevent personal injury or property damage: 1.Do not charge or replace batteries in areas with fuels, chemicals, explosive gases, or other flammable/ combustible materials. 2.Do not charge the battery or terminal if damp; ensure it is thoroughly dried with a clean cloth before charging. 3.Do not charge the battery if it shows signs of leakage, deformation, overheating, or other abnormalities. 4.Do not use uncertified chargers for charging. 5.Do not charge in humid environments. 6.Do not overcharge the battery, as this may shorten its lifespan. Maintenance Guidelines To ensure stable battery performance and extend its service life, follow these precautions: 1.If dust accumulates on the battery contacts, clean them promptly with a clean, dry cloth to avoid charging issues. 2.Charge the battery within an ambient temperature range of 5° C to 40° C. Extremely high or low temperatures may shorten battery life or cause leakage. 3.When charging the terminal with the battery installed, it is recommended to turn off the device for optimal charging. 4.Do not unplug the power or remove the battery during charging to avoid interrupting the process. 5.Do not expose the battery to fire. 6.Do not leave the battery in direct sunlight or near other heat sources for extended periods. 7.Do not crush, puncture, or disassemble the battery casing. Transportation Guidelines 1.Do not transport damaged batteries. 2.Ensure there …

Text truncated - open the document above for the full version.

Quanzhou Binte Electronic Technology Co., Ltd. ADD: No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui'an County, Quanzhou City, Fujian Province, China TEL: +86-13055655367 Mail Address: [email protected] Date: 2025-12-04 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Quanzhou Binte Electronic Technology Co., Ltd., hereby authorize Bay Area Compliance Laboratories Corp.(Xiamen) to act as a laboratory for testing and test report generation for the following project(s): (Product name: F M Mobile Radio, Model Name: BT9000, RT-950, RT-950PRO, BJ9000, BJ9000 PRO, UV98PLUS, RT-950PRO MAX, BT9000PRO, BT9100 , HI-UV850pro, AR -980, AR-980 PRO, FCC ID: 2BN9A-BT9000) The product only support : Scanning(136-174MHz,400-520MHz), VHF Receiving (136-174MHz), UHF Receiving(400-520MHz), amateur frequency(144-148MHz,420-450MHz), other functions has been shielded by software, and end user cannot activate them. Sincerely, Signature: Printed Name: Shiqiang Liang Title: Manager

Quanzhou Binte Electronic Technology Co., Ltd. Add: No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui'an County, Quanzhou City, Fujian Province, China Tel: +86-13055655367 E-mail: [email protected] Attestation Letter Date: 12/04/2025 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID: 2BN9A-BT9000 Quanzhou Binte Electronic Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Quanzhou Binte Electronic Technology Co., Ltd. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Quanzhou Binte Electronic Technology Co., Ltd. (“the applicant”) certifies that our product does not use Kaspersky's software information. Sincerely, Signature Contact Person: Shiqiang Liang Title: Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2025-12-04 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2BN9A-BT9000 Quanzhou Binte Electronic Technology Co., Ltd. certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Quanzhou Binte Electronic Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: Quanzhou Binte Electronic Technology Co., Ltd. Address: No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui'an County, Quanzhou City, Fujian Province, China FRN: 0036791341 Tel: +86-13055655367 Email: [email protected] Signed by (printed name): Shiqiang Liang Signature:

Quanzhou Binte Electronic Technology Co., Ltd. ADD: No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui'an County, Quanzhou City, Fujian Province, China TEL: +86-13055655367 Mail Address: [email protected] Attestation Letter Date:2025-12-04 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements for Amateur TX Frequencies FCC ID: 2BN9A-BT9000 Quanzhou Binte Electronic Technology Co., Ltd. (“the applicant”) certifies that the equipment for transmitter frequencies can be programmed for only amateur frequencies (144-148MHz, 420- 450MHz) Also, equipment programming is the responsibility of Authorized Service Personnel, in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Sincerely, Signature Contact Person: Shiqiang Liang Title: Manager

QA-FR-170-B Quanzhou Binte Electronic Technology Co., Ltd. Add: No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui'an County, Quanzhou City, Fujian Province, China Tel: +86-13055655367 E-mail: [email protected] FCC Authorization Date: 2025-12-04 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Quanzhou Binte Electronic Technology Co., Ltd., Hereby authorizes Bay Area Compliance Laboratories Corp. (Xiamen) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Xiamen) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Contact Person: Shiqiang Liang Title: Manager

QA-FR-171-A Quanzhou Binte Electronic Technology Co., Ltd. Add: No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui'an County, Quanzhou City, Fujian Province, China Tel: +86-13055655367 E-mail: [email protected] FCC Confidential Authorization Date: 2025-12-04 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2BN9A-BT9000 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Quanzhou Binte Electronic Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Internal Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Contact Person: Shiqiang Liang Title: Manager

Quanzhou Binte Electronic Technology Co., Ltd. ADD: No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui'an County, Quanzhou City, Fujian Province, China TEL: +86-13055655367 Mail Address: [email protected] DECLARATION OF SIMILARITY Date: 2025-10-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Quanzhou Binte Electronic Technology Co., Ltd., hereby declare that the product: FM Mobile Radio, FCC ID: 2BN9A-BT9000. model: RT-950, RT-950PRO, BJ9000, BJ9000 PRO, UV98PLUS, RT-950PRO MAX, BT9000PRO, BT9100, HI-UV850pro, AR-980, AR-980 PRO are electrically identical with the model: BT9000 which was tested by Bay Area Compliance Laboratories Corp.(Xiamen) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between those models and that are declared similar are as follows: The tested model has two colors. Tested Model(s) Series Models Differences Items Details BT9000 RT-950, RT-950PRO, BJ9000, BJ9000 PRO, UV98PLUS, RT-950PRO MAX , HI-UV850pro, AR-980, AR-980 PRO Model Name, trade name and color All are the same except model name, trade name and color. BT9000 BT9000PRO Model Name and color All are the same except model name and color. BT9000 BT9100 Model Name, color and button icon All are the same except model name, color and button icon. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Shiqiang Liang Title: Manager

202 5-12-04 FEDERAL COMMUNICATIONS COMMISSIONS Autho rization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §15.121 We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semicon ductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver in operable. This scan ning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. FCC ID:2BN9A-BT9000 Quanzhou Binte Electronic Technology Co., Ltd. ADD:No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui'an County, Quanzhou City, TEL: +86-13055655367 Mail Address: [email protected] Fujian Province, China We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. Sincerely, Signature: Typed or Printed Name: Shiqiang Liang Title: Manager

Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 1 / 47 EUT EXTERNAL PHOTOS BT9000(Black) Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 2 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 3 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 4 / 47 RT-950 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 5 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 6 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 7 / 47 RT-950PRO Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 8 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 9 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 10 / 47 BJ9000 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 11 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 12 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 13 / 47 BJ9000 PRO Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 14 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 15 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 16 / 47 UV98PLUS Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 17 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 18 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 19 / 47 RT-950PRO MAX Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 20 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 21 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 22 / 47 BT9000PRO Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 23 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 24 / 47

Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 25 / 47 HI-UV850pro Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 26 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 27 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 28 / 47 BT9100 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 29 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 30 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 31 / 47 BT9000(Green) Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 32 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 33 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 34 / 47 AR-980 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 35 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 36 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 37 / 47 AR-980 PRO Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 38 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 39 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 40 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 41 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 42 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 43 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 44 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 45 / 47 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 46 / 47 Antenna Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-EXP Page 47 / 47

FCC Part 15B Page 1 of 69 FCC PART 15B TEST REPORT For Quanzhou Binte Electronic Technology Co., Ltd. No. 1 Industrial Road, Chengbei Industrial Zone, Luocheng Town, Hui’an County, Quanzhou City, Fujian Province, China FCC ID: 2BN9A-BT9000 Report Type: Original Report Product Name: FM Mobile Radio Repo rt Number: 2507Y11322E-EM-01 Report Date: 2025-11-28 Reviewed By: Ash Lin Approved By: Miles Chen Pr epared By: Bay Area Compliance Laboratories Corp. (Xiamen) Unit 102, No. 902 Meifeng South Road, Binhai West Avenue, Science and Technology Innovation Park, Torch High tech Zone XiaMen Tel: +86-592-3200111 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-01 FCC Part 15B Page 2 of 69 TABLE OF CONTENTS REPORT REVISION HISTORY ................................................................................................................................ 3 GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 TEST MODE AND VOLTAGE .......................................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................. 11 TEST EQUIPMENT LIST ......................................................................................................................................... 12 FCC §15.107 - CONDUCTED EMISSION ............................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 TEST SYSTEM SETUP .................................................................................................................................................. 13 EMI TEST RECEIVER SETUP ....................................................................................................................................... 14 TEST PROCEDURE ...................................................................................................................................................... 14 RESULT & MARGIN CALCULATION ............................................................................................................................ 14 TEST DATA (WORST CASE) ........................................................................................................................................ 15 FCC §15.109 - RADIATED EMISSION IN FREQUENCY .................................................................................... 23 APPLICABLE STANDARD ............................................................................................................................................ 23 TEST SYSTEM SETUP .................................................................................................................................................. 23 EMI TEST RECEIVER SETUP ....................................................................................................................................... 24 TEST PROCEDURE ...................................................................................................................................................... 24 RESULT & MARGIN CALCULATION ............................................................................................................................ 24 TEST DATA ................................................................................................................................................................ 25 FCC §15.121(B) – SCANNING RECEIVERS AND FREQUENCY CONVERTERS USED WITH SCANNING RECEIVERS ................................................................................................................................................................ 65 APPLICABLE STANDA…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 1 / 12 EUT SETUP PHOTOS CE - Front View (Below 1GHz) – Mode 1 CE - Side View (Below 1GHz) – Mode 1 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 2 / 12 CE - Front View (Below 1GHz) – Mode 2 CE - Side View (Below 1GHz) – Mode 2 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 3 / 12 CE - Front View (Below 1GHz) – Mode 3 CE - Side View (Below 1GHz) – Mode 3 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 4 / 12 CE - Front View (Below 1GHz) – Mode 4 CE - Side View (Below 1GHz) – Mode 4 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 5 / 12 Radiation Emission - Front View (Below 1GHz) – Mode 1 Radiation Emission - Back View (Below 1GHz) – Mode 1 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 6 / 12 Radiation Emission - Front View (Below 1GHz) – Mode 2 Radiation Emission - Back View (Below 1GHz) – Mode 2 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 7 / 12 Radiation Emission - Front View (Below 1GHz) – Mode 3 Radiation Emission - Back View (Below 1GHz) – Mode 3 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 8 / 12 Radiation Emission - Front View (Below 1GHz) – Mode 4 Radiation Emission - Back View (Below 1GHz) – Mode 4 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 9 / 12 Radiation Emission - Front View (Above 1GHz) – Mode 1 Radiation Emission - Back View (Above 1GHz) – Mode 1 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 10 / 12 Radiation Emission - Front View (Above 1GHz) – Mode 2 Radiation Emission - Back View (Above 1GHz) – Mode 2 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 11 / 12 Radiation Emission - Front View (Above 1GHz) – Mode 3 Radiation Emission - Back View (Above 1GHz) – Mode 3 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507Y11322E-EM-TSP Page 12 / 12 Radiation Emission - Front View (Above 1GHz) – Mode 4 Radiation Emission - Back View (Above 1GHz) – Mode 4