2BNB7-RWF015603B15.6-inch Portable Monitor

Wireless Portable Displays User Manual This is a plug-and-play monitor and does not require any driver setup Product Name Portable Displays Product Size 361.95*227.18*14mm Screen size 15.6 inch. Resolution 1920*1080 Product weight 0.84Kg Refresh frequency 60Hz Is it touching NO Brightness 180~250cd/m² Viewing angle 178° Contrast 800:1 Fuselage Material ABS Speakers 8Ω/2W*2 Output port 3.5mm headphone port Input port miniHDMI,Type-C×2 Packing List miniHDMI to HDMI cable *1, USB to Type-C cable *1, USB power adapter *1, protective case *1, manual *1 *Note: The above data are related to the measurement tools, environment, personnel and other objective factors, there may be errors, such as error is normal, please take the actual measurement shall prevail. If there are updates and changes to the hardware parameters and the above parameter information has not been updated in a timely manner, please refer to the actual product received. Product Information Product Appearance ■Button and Interface Descriptions ：Return/Power Button，Long press: Power on/off；Short press: Toggle projection source; Serves as return key when OSD menu is displayed ：Brightness/Increase Button，Press once: Displays brightness adjustment menu，Press again: Increases brightness; Adjusts volume up when volume menu is active ：Volume/Decrease Button，Press once: Displays volume adjustment menu， Press again: Decreases volume; Adjusts brightness down when brightness menu is active ：Short press: Displays settings menu (brightness, volume, aspect ratio, auto-rotate, language) Long press: Toggles wireless projection mode (CM-A/CM-B) Type-C①：Power supply port (supports fast charging) Type-C②：Data transfer port Mini-HDMI：Wired projection interface Earphone：3.5mm headphone jack CM-A/CM-B Mode： Default mode: CM-A For regions where wireless projection is unavailable, long-press OSD to switch to CM-B mode. ■Projection Source Switching Upon startup, the device defaults to the wireless projection display. Short-press the Power button to switch to HDMI wired projection. ■Type-C 3.1 interface (support PD protocol) Data transmission, audio and video output, fast charging in one device Interface & Button Introduction ① Laptop or desktop computer port connected to HDMI ② Cell phones, tablets, and computers connect wirelessly by following the guide screen on the top page of the device ③Connecting to a gaming device port HDMI Basic operation of device connection HDMI to Mini HDMI Cable USB to Type-C Power Cable USB Power Pad USB Power HDMI to Mini HDMI Cable USB to Type-C Power Cable USB Power X-box one PS345 ④Other devices port connected to HDMI ⑤Connecting to Nintendo consoles 01) with Connect to cable Switch base HDMI 02) Type-C cable connects to Switch Repeated black or flashing screen on the monitor A: The minimum power requirement of the monitor is 5V2A; the above problem may be caused by insufficient power supply, please connect a stable external DC power supply to the monitor. o common problems About after-sales and shipping USB Power HDMI to Mini HDMI Cable USB to Type-C Power Cable HDMI to Mini HDMI Cable USB to Type-C Power Cable USB Power HDMI to Mini HDMI Cable USB to Type-C Power Cable USB Power  Any quality problems caused by external forces will not be returned or exchanged. Such as: drop, hit, touch, disassemble the machine to change or accident.  We do not cover the shipping cost for returns or exchanges that are not of quality; if there is a quality problem, we cover the standard shipping .cost The warranty only covers the main body of the product. Software, accessories, consumables, etc. stored in the product or connected products are not covered by the warranty. Warranty is not covered if. 1) Due to fire, earthquake, lightning, gas damage and other natural disasters, pollution or abnormal voltage and other external Malfunctions and damages caused by the environment. 1) Improper such as falling after purchase and transportation, or impact during movement. Failure or damage caused by operation 2) Operation failure and damage caused by improper use. 3) Modify, adjust, and replace parts for this product. 4) The of the light source LED backlight is a consumable item and is not covered by the warranty. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. About Warranty

Guangdong R&E Optical Electronic Technology CO., LTD Covered Equipment Certification Attestation Letter 12/17/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BNB7-RWF015603B Guangdong R&E Optical Electronic Technology CO., LTD (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Guangdong R&E Optical Electronic Technology CO., LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Guangdong R&E Optical Electronic Technology CO., LTD (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti- virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Zhang Ye Title: Manager Company Name: Guangdong R&E Optical Electronic Technology CO., LTD Date: 12/17/2025

Guangdong R&E Optical Electronic Technology CO., LTD U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: December 17, 2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BNB7-RWF015603B Guangdong R&E Optical Electronic Technology CO., LTD (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Guangdong R&E Optical Electronic Technology CO., LTD FRN: 0037726866 Address: NO.1 Jingmei NO.5 industrial Road, Dongkeng Town, Dongguan City, Guangdong Province, China Signature: Contact Person: Zhang Ye Tel: 18772905900 Email: [email protected]

DATE: December 17, 2025 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BNB7-RWF015603B Product Name: 15.6-inch Portable Monitor Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Zhang Ye Title: Manager Company: Guangdong R&E Optical Electronic Technology CO., LTD

Date: December 17, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Zhang Ye Title: Manager Company: Guangdong R&E Optical Electronic Technology CO., LTD

DATE: December 17, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen CCUT Quality Technology Co., Ltd. (1F, Building 35, Changxing Technology Indstrl Park Changzhen Community, Yutang Street,Shenzhen,China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Guangdong R&E Optical Electronic Technology CO., LTD (NO.1 Jingmei NO.5 industrial Road, Dongkeng Town, Dongguan City, Guangdong Province, China). <Signature> Name: Zhang Ye Title: Manager Company: Guangdong R&E Optical Electronic Technology CO., LTD

Guangdong R&E Optical Electronic Technology CO., LTD Model Difference Statement DATE: December 17, 2025 FCC ID: 2BNB7-RWF015603B Dear Sir/Madam, Added models RWF010101B, RWF010501B, RWF013301B, RWF014001B, RWF016001B, RWF017301B, RWF018501B, RWF023801B basis of the original product RWF015603B. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Zhang Ye Title: Manager Company name: Guangdong R&E Optical Electronic Technology CO., LTD Address: NO.1 Jingmei NO.5 industrial Road, Dongkeng Town, Dongguan City, Guangdong Province, China

Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report Annex A. EUT External Photos Model: RWF015603B EUT View 1 EUT View 2 Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report EUT View 7 EUT View 8

Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report Annex B. EUT Internal Photos Model: RWF015603B EUT Internal View 1 EUT Internal View 2 Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report EUT Internal View 5 EUT Internal View 6 FPCB ANT Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report EUT Internal View 7 EUT Internal View 8

FCC ID: 2BNB7-RWF015603B RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For 2.4GWiFi Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 6.05 6(±1) 7 5.01 2462 5 1.57221 3.0 For 5.8GWiFi Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 5.92 5(±1) 6 3.98 5745 5 1.90791 3.0 The device cannot transmit with 2.4G WI-FI and 5.8G WI-FI simultaneously. So a SAR test is not required

Report No: SSP25110602-1E FCC Test Report Page 1 of 50 FCC TEST REPORT FCC ID: 2BNB7-RWF015603B Report No. : SSP25110602-1E Applicant : Guangdong R&E Optical Electronic Technology CO., LTD Product Name : 15.6-inch Portable Monitor Model Name : RWF015603B Test Standard : FCC Part 15.247 Date of Issue : 2025-12-10 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25110602-1E FCC Test Report Page 2 of 50 Test Report Basic Information Applicant..................................: Guangdong R&E Optical Electronic Technology CO., LTD Address of Applicant...............: NO.1 Jingmei NO.5 industrial Road, Dongkeng Town, Dongguan City , Guangdong Province Manufacturer..........................: Guangdong R&E Optical Electronic Technology CO., LTD Address of Manufacturer........: NO.1 Jingmei NO.5 industrial Road, Dongkeng Town, Dongguan City , Guangdong Province Product Name.........................: 15.6-inch Portable Monitor Brand Name.............................: Rovesky Main Model..............................: RWF015603B Series Models..........................: RWF010101B, RWF010501B, RWF013301B, RWF014001B, RWF016001B, RWF017301B, RWF018501B, RWF023801B Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2025-11-20 to 2025-12-09 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25110602-1E FCC Test Report Page 3 of 50 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data …

Text truncated - open the document above for the full version.

深圳市云顶通讯电子有限公司 Shenzhen Yunding Communication Electronics Co.,Ltd. SECLUDED 2025-11-27 Test report 深圳云顶通讯电子有限公司 Shenzhen Yunding Communication Electronics Co.,Ltd. 一、测试环境 深圳云顶通讯电子有限公司 Shenzhen Yunding Communication Electronics Co.,Ltd. 二、天线装配图Antenna assembly drawing 天线贴覆于此 The antenna is attached here. 深圳云顶通讯电子有限公司 Shenzhen Yunding Communication Electronics Co.,Ltd. 三、天线-VSWR 深圳云顶通讯电子有限公司 Shenzhen Yunding Communication Electronics Co.,Ltd. 四、天线暗室测试数据：效率增益Antenna anechoic chamber test data: Efficiency gain Frequency/MHzMaxGain/dBiEfficiency / % 24001.9237.23 24102.1840.27 24202.6741.62 24302.6741.84 24402.7943.27 24502.6543.88 24602.542.73 24702.6643.57 24802.5843.04 24902.3541.26 25002.0339.85 深圳云顶通讯电子有限公司 Shenzhen Yunding Communication Electronics Co.,Ltd. 天线暗室测试数据：效率增益Antenna anechoic chamber test data: Efficiency gain Frequency/MHzMaxGain/dBiEfficiency / % 5150 2.92 41.88 52503.2640.36 53503.6341.59 5450339.99 55502.7937.76 56503.0537.84 57503.8338.19 58502.8238.55

Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP25110602-1&2E FCC ID: 2BNB7-RWF015603B Annex of Test Report Radiated Emission Test View Above 1GHz