2BNEU-BRMTAG-2501Bremen Pet Tag

Bremen Co.,Ltd. Covered Equipment Certification Attestation Letter 8/20/2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2BNEU-BRMTAG-2501 Bremen Co.,Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Bremen Co.,Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Sung Moo Kim Title: President Company Name: Bremen Co.,Ltd. Date: 8/20/2025

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. Bremen Co., Ltd. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: January 21, 2025 Signed by (Printed Name/Title): Nathan Grinager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Bremen Co.,Ltd. Grantee FRN: 2BNEU FCC ID: 2BNEU-BRMTAG-2501 Contact Name: Sung Moo Kim Street Address: 1020, 107, Garam-ro 116beon-gil, City/Province/Zip: Paju-si, Gyeonggi-do, South Korea Telephone No: +82-70-7727-4282 Email: [email protected] Applicant Signature: Date: January 21, 2025 Signed by (Printed Name/Title): Sung Moo Kim / President

Bremen Co.,Ltd. 8/20/2025 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 AUTHORITY TO ACT AS AGENT - FCC On our behalf, I appoint ONETECH Corp., to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko North America Inc., still resides still resides with us. Sincerely, Signed: Printed name: Sung Moo Kim

Bremen Co.,Ltd. August 20, 2025 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2BNEU-BRMTAG-2501 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform Nemko to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☒ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: Sung Moo Kim Title: President Company Name: Bremen Co.,Ltd.

Page 1 of 6 Report No.: OT-258-RWD-015 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMF TEST REPORT Test Report No. : OT-258-RWD-015 Reception No. : 2411004229 Applicant : Bremen Co.,Ltd. Address : #1020, 107, Garam-ro 116beon-gil, Paju-si, Gyeonggi-do, South Korea Manufacturer : Bremen Co.,Ltd. Address : #1020, 107, Garam-ro 116beon-gil, Paju-si, Gyeonggi-do, South Korea Type of Equipment : Bremen Pet Tag FCC ID. : 2BNEU-BRMTAG-2501 Model Name : BRM.TAG-2501 Multiple Model Name : N/A Serial number : N/A Total page of Report : 6 pages (including this page) Date of Incoming : January 09, 2025 Date of issue : August 20, 2025 SUMMARY The equipment complies with the regulation; FCC CFR 47 PART 2.1093 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Si-eon Lee / Sr. Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 6 Report No.: OT-258-RWD-015 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 5 3. EUT MODIFICATIONS .................................................................................................................................................... 5 4. RF EXPOSURE EVALUATION ...................................................................................................................................... 6 4.1 RF EXPOSURE CALCULATION ....................................................................................................................................... 6 4.2 EUT DESCRIPTION ......................................................................................................................................................... 6 4.3 TEST RESULT ................................................................................................................................................................. 6 4.3.1 Test data for Bluetooth LE ..................................................................................................................................... 6 Page 3 of 6 Report No.: OT-258-RWD-015 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) Revision History Rev. No. Issue Report No. Issued Date Revisions Section Affected 0 OT-258-RWD-015 August 20, 2025 Initial Release All Page 4 of 6 Report No.: OT-258-RWD-015 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 1. VERIFICATION OF COMPLIANCE Applicant : Bremen Co.,Ltd. Address : #1020, 107, Garam-ro 116beon-gil, Paju-si, Gyeonggi-do, South Korea Contact Person : Sung Moo Kim / President Telephone No. : +82-70-7727-4282 FCC ID : 2BNEU-BRMTAG-2501 Model Name : BRM.TAG-2501 Brand Name : Serial Number : N/A EQUIPMENT CLASS DTS – DIGITAL TRNSMISSION SYSTEM E.U.T. DESCRIPTION Bremen Pet Tag THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES KDB 447498 D01 General RF Exposure Guidance v06 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED Certification Modifications on the Equipment to Achieve Compliance None -. The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements. Page 5 of 6 Report No.: OT-258-RWD-015 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 2. GENERAL INFORMATION 2.1 Product Description The Bremen Co.,Ltd., Model BRM.TAG-2501 (referred to as the EUT in this report) is a Bremen Pet Tag. The product specification described herein was obtained from product data sheet or user’s manual. DEVICE TYPE Bremen Pet Tag OPERATING FREQUENCY 2 402 MHz ~ 2 480 MHz MODULATION TYPE GFSK RF OUTPUT POWER Bluetooth LE 1 Mbps -1.29 dBm ANTENNA TYPE Chip Antenna ANTENNA GAIN 1.00 dBi List of each Osc. or crystal Freq.(Freq. >= 1 MHz) 32 MHz RATED SUPPLY VOLTAGE DC 3.70 V 2.2 Alternative type(s)/model(s); also covered by this test report. -. None 3. EUT MODIFICATIONS -. None Page 6 of 6 Report No.: OT-258-RWD-015 It should not be reproduced except in full, without the written approval of ONETECH Corp. …

Text truncated - open the document above for the full version.

Ultra-Miniature 2.4GHz Chip antenna 0.37mm max Thickness P/N 2450AT07A0100 Detail Specification:Page 1 of 5 Evaluation Board No. L±± 1 W±± 2 T 3 a 4 b c Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2020 Johanson Technology, Inc. All Rights Reserved P/N Suffix Packing Style "High Frequency Ceramic Solutions" 2W max. (CW) 50 Ω 10/12/2020 Average Gain (dBi typ.) Peak Gain (dBi typ.) Part Number2450AT07A0100 2400 - 2500 1.0 (XZ-Total) Frequency (MHz) 6.5 dB min. 0.014 max -1.5 (XZ-Total) Function Feed Return Loss -40 to +125°C Terminal Configuration Recommended Storage Conditions of unused product on T&R +5 ~ +35 °C Humidity 45~75%RH 18 months max. 0.004 0.004 mmIn 0.50 Mechanical Dimensions Input Power GND GND +0.1/-0.05 Feed+0.1/-0.05 +0.1/-0.05 0.10 0.37 max 0.25 0.08 0.15 Ver 3.1 Operating Temperature General Specifications 1.000.100.039 Impedance 0.003 0.010 +.004/-.006 +.004/-.006 +.004/-.0060.006 0.020 Part Number Explanation 2450AT07A0100-EB1SMA Bulk (loose) Suffix = Se.g. 2450AT07A0100S TraySuffix = Te.g. 2450AT07A0100T 1 2 34 L W a b c T Ultra-Miniature 2.4GHz Chip antenna 0.37mm max Thickness P/N 2450AT07A0100 Detail Specification:Page 2 of 5 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2020 Johanson Technology, Inc. All Rights Reserved Ver 3.1 "High Frequency Ceramic Solutions" 10/12/2020 Mounting Considerations Test Board-Top View (Units in mm) Land Solder 0.9 4.0 0.4 0.3 0.3 0.7 1.2 0.25 1.5 5.0 3 .0 Feed line Matching circuit No Ground (Yellow area) GND Plane * 0.1 1 23 4 It is recommended that the designer leave available slots for a "pi" (shunt-series-shunt) network. The antenna matching network values above are used when antenna is mounted on Johanson's evaluation board. Matching components will vary depending on PCB design. Let us help you tune our antenna on your new layout, contact our RF Applications Eng. Team at: https://www.johansontechnology.com/ask-a-question *Line width should be designed to maintain 50Ω impedance matching characteristics. Units: mm Ultra-Miniature 2.4GHz Chip antenna 0.37mm max Thickness P/N 2450AT07A0100 Detail Specification:Page 3 of 5 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2020 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 10/12/2020 Ver 3.1 Layout Guidelines and EVB Specifications No ground (Yellow area) Ground Pi matching network recommended Feed 3 5 20 40 Test Board-Top View (Units in mm) 40 20 Ground clearance (Yellow area) 3 5 Test Board-Bottom View (Units in mm) To order a pre-tuned evaluation board with SMA connector click here: https://www.johansontechnology.com/request-a-sample Reference p/n: 2450AT07A0100-EB1SMA To request the layout files go to: https://www.johansontechnology.com/ask-a-question Ground Ultra-Miniature 2.4GHz Chip antenna 0.37mm max Thickness P/N 2450AT07A0100 Detail Specification:Page 4 of 5 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2020 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 10/12/2020 Ver 3.1 Typical Radiation Patterns @25C YZ‐plane XZ‐plane XY‐plane θ +Z (θ= 0°) +Y (θ= 90°) -Y -Z θ +Z (θ= 0°) +X (θ= 90°) -X -Z φ +X (φ= 0°) -X +Y (φ= 90°) -Y +Z +Z +Y +Y +X +X -Y -X -X -Z -Z -Y Ultra-Miniature 2.4GHz Chip antenna 0.37mm max Thickness P/N 2450AT07A0100 Detail Specification:Page 5 of 5 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2020 Johanson Technology, Inc. All Rights Reserved https://www.johansontechnology.com/tape-reel-packaging https://www.johansontechnology.com/ipcsoldering-profile https://www.johansontechnology.com/rohs-compliance Ver 3.1 "High Frequency Ceramic Solutions" 10/12/2020 Typical Electrical Performance (T=25°C) Packaging information Soldering Information Antenna layout and tuning techniques (How to obtain the new antenna matching values) https://www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services https://www.johansontechnology.com/ipc-antenna-services RoHS Compliance https://www.johansontechnology.com/msl-rating MSL Info Return Loss / Without Matching Circuits 2.12.22.32.42.52.62.72.82.92.03.0 -20 -15 -10 -5 -25 0 freq, GHz dB(S(1,1)) m1 m2 m3 m1 freq= dB(S(1,1))=-5.100 2.370GHz m2 freq= dB(S(1,1))=-20.709 2.450GHz m3 freq= dB(S(1,1))=-5.437 2.530GHz To download antenna s-parameters, please go to: https://www.johansontechnology.com/antennas Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Johanson: 2450AT07A0100T

Page 1 of 24 Report No.: OT-258-RWD-014 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) RADIO PERFORMANCE TEST REPORT Test Report No. : OT-258-RWD-014 Reception No. : 2411004229 Applicant : Bremen Co.,Ltd. Address : #1020, 107, Garam-ro 116beon-gil, Paju-si, Gyeonggi-do, South Korea Manufacturer : Bremen Co.,Ltd. Address : #1020, 107, Garam-ro 116beon-gil, Paju-si, Gyeonggi-do, South Korea Type of Equipment : Bremen Pet Tag FCC ID. : 2BNEU-BRMTAG-2501 Model Name : BRM.TAG-2501 Multiple Model Name : N/A Serial number : N/A Total page of Report : 24 pages (including this page) Date of Incoming : January 09, 2025 Date of issue : August 20, 2025 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Si-eon Lee / Sr. Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 24 Report No.: OT-258-RWD-014 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 5 2. TEST SUMMARY .............................................................................................................................................................. 6 2.1 TEST ITEMS AND RESULTS ............................................................................................................................................. 6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS ........................................................................................... 6 2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................ 6 2.4 PURPOSE OF THE TEST ................................................................................................................................................... 6 2.5 TEST METHODOLOGY .................................................................................................................................................... 6 2.6 TEST FACILITY ............................................................................................................................................................... 6 3. GENERAL INFORMATION ............................................................................................................................................ 7 3.1 PRODUCT DESCRIPTION ................................................................................................................................................. 7 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 7 4. EUT MODIFICATIONS .................................................................................................................................................... 7 5. SYSTEM TEST CONFIGURATION ............................................................................................................................... 8 5.1 JUSTIFICATION ............................................................................................................................................................... 8 5.2 PERIPHERAL EQUIPMENT .............................................................................................................................................. 8 5.3 MODE OF OPERATION DURING THE TEST ...................................................................................................................... 9 5.4 CONFIGURATION OF TEST SYSTEM ............................................................................................................................. 10 5.5 ANTENNA REQUIREMENT ............................................................................................................................................ 10 6. PRELIMINARY TEST .................................................................................................................................................... 10 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ....................................................................................................... 10 6.2 GENERAL RADIATED EMISSIONS TESTS ..................................................................................................................... 10 7. MIMIMUM 6 DB BANDWIDTH ................................................................................................................................... 11 7.1 OPERATING ENVIRONMENT ......................................................................................................................................... 11 7.2 TEST SET-UP ................................................................................................................................................................. 11 7.3 MEASUREMENT UNCERTAINTY ................................................................................................................................... 11 7.4 TEST DATE ...................................................................................................................................…

Text truncated - open the document above for the full version.

Appendix Data 1. DUTY CYCLE ........................................................................................................................................... 2 2. MINIMUM 6 DB BANDWIDTH ............................................................................................................. 4 3. MAXIMUM PEAK OUTPUT POWER ................................................................................................. 7 4. 100 KHZ BANDWIDTH OUTSIDE THE FREQUENCY BAND ...................................................... 10 5. RADIATED EMISSION ......................................................................................................................... 17 6. PEAK POWER SPECTRAL DENSITY ............................................................................................... 28 1 / 30 Test ItemNo.ModeChannel Duty Cycle 1BLE 1 Mbps2440 Pass Test BandBLE 1 Mbps Antenna Test Parameters for Channel Bandwidths Verdict 2 / 30 1 Duty Cycle 3 / 30 Test ItemNo.ModeChannel 1BLE 1 Mbps2402 2BLE 1 Mbps2440 3BLE 1 Mbps2480 Minimum 6 dB Bandwidth Pass Pass Pass Verdict Test BandBLE 1 Mbps Antenna Test Parameters for Channel Bandwidths 4 / 30 1 2 6dB Bandwidth 6dB Bandwidth 5 / 30 3 6dB Bandwidth 6 / 30 Test ItemNo.ModeChannel 1BLE 1 Mbps2402 2BLE 1 Mbps2440 3BLE 1 Mbps2480 Test BandBLE 1 Mbps Antenna Test Parameters for Channel Bandwidths Maximum Peak Output Power Pass Pass Pass Verdict 7 / 30 1 2 Maximum Peak Output Power Maximum Peak Output Power 8 / 30 3 Maximum Peak Output Power 9 / 30 Test ItemNo.ModeChannel 1BLE 1 Mbps2402 2BLE 1 Mbps2440 3BLE 1 Mbps2480 Test BandBLE 1 Mbps Antenna Test Parameters for Channel Bandwidths 100 kHz Bandwidth Pass Pass Pass Verdict 10 / 30 1 1.1 100 kHz Bandwidth 100 kHz Bandwidth 11 / 30 1.2 2 100 kHz Bandwidth 100 kHz Bandwidth 12 / 30 2.1 2.2 100 kHz Bandwidth 100 kHz Bandwidth 13 / 30 3 3.1 100 kHz Bandwidth 100 kHz Bandwidth 14 / 30 3.2 100 kHz Bandwidth 15 / 30 Test ItemNo.ModeChannelBandwidthDetectorPolarization Restricted0BLE 1 Mbps2402avHorizontal Restricted1BLE 1 Mbps2402avVertical Restricted2BLE 1 Mbps2402pkHorizontal Restricted3BLE 1 Mbps2402pkVertical Restricted4BLE 1 Mbps2480avHorizontal Restricted5BLE 1 Mbps2480avVertical Restricted6BLE 1 Mbps2480pkHorizontal Restricted7BLE 1 Mbps2480pkVertical Test Parameters Antenna Test BandBLE 1 Mbps 16 / 30 0 1 Harmonic Harmonic 17 / 30 2 3 Harmonic Harmonic 18 / 30 4 5 Harmonic Harmonic 19 / 30 6 7 Harmonic Harmonic 20 / 30 Test ItemNo.ModeFrquencyBandwidthDetectorHarmonicPolarization Harmonic0BLE 1 Mbps4804av2Horizontal Harmonic1BLE 1 Mbps4804av2Vertical Harmonic2BLE 1 Mbps4804pk2Horizontal Harmonic3BLE 1 Mbps4804pk2Vertical Harmonic4BLE 1 Mbps4880av2Horizontal Harmonic5BLE 1 Mbps4880av2Vertical Harmonic6BLE 1 Mbps4880pk2Horizontal Harmonic7BLE 1 Mbps4880pk2Vertical Harmonic8BLE 1 Mbps4960av2Horizontal Harmonic9BLE 1 Mbps4960av2Vertical Harmonic10BLE 1 Mbps4960pk2Horizontal Harmonic11BLE 1 Mbps4960pk2Vertical Test Parameters Antenna Test BandBLE 1 Mbps 21 / 30 0 1 Harmonic Harmonic 22 / 30 2 3 Harmonic Harmonic 23 / 30 4 5 Harmonic Harmonic 24 / 30 6 7 Harmonic Harmonic 25 / 30 8 9 Harmonic Harmonic 26 / 30 10 11 Harmonic Harmonic 27 / 30 Test ItemNo.ModeChannel 1BLE 1 Mbps2402 2BLE 1 Mbps2440 3BLE 1 Mbps2480 …

Text truncated - open the document above for the full version.