2BNGZ-M10Tablet PC

Tablet PC USER GUIDE Please read this instruction throughly before using this product and keep it for future reference. EN GETTING STARTED Power On/Offff Press and hold the power button for 2-3s to turn on your tablet. Select your language and set up your tablet following the start guide. Press and hold the power button for 2s, then release it. It will show Power Off and Restart on the screen. Tap Power Off to turn off the tablet. Press and hold the power button for 5s to do a forced shutdown when it's frozen. Battery A rechargeable Li-ion battery is installed in the tablet. We suggest you drain the battery completely once a month if only use your tablet occasionally. DO NOT dispose of tablet in a fire. Sleep Mode Simply press the power button once to switch the tablet to the Sleep Mode when the tablet is ON; press again to wake it up. Tip: Go to Settings > Display > Sleep to set the time of entering the Sleep Mode. 01 EN EN HOME SCREEN Icons on the Bottom Menu 1.Volume Down 2.Back 3.Home Screen 4.Recent Activities 5.Volume Up 6.Apps Collection Wallpapers, Widgets and Home Settings 02 Tap and hold the empty section of a Home screen, WALLPAPERS, WIDGETS and HOME SETTINGS will be displayed. Tap WALLPAPERS icon to change the current wallpaper of the tablet from the default wallpapers or your photos. Tap WIDGETS, touch and hold any widget (e.g. Clock), then slide and add it to a Home screen. Remove it by sliding to X. Tap HOME SETTINGS to enable/disable Add icon to Home screen. This is applicable to the new Apps installed from Play Store. EN SETTING BASICS Quick Settings EN More Settings Swipe down from the top of the screen to access Quick Settings. : Wi-Fi. Tap to connect to a wireless network : Bluetooth. Enable/disable the Bluetooth on the tablet; pair with other Bluetooth devices or view paired devices : Do Not Disturb. Block sounds or vibrations according to the different modes (Total silence, Alarms only and Priority only) : Portrait/Auto-rotate/Landscape : Battery Saver. Enable/disable the low power mode : Airplane Mode. Turn on/off all the network connectivity E Eye protection mode reduces eye damage In different environments Tap the icon to change the options in the Quick Settings. Swipe down from the top of the screen, then tap the icon to enter the detailed Setting interface. Or, tap the Settings icon on the Home screen to enter. Network & Internet *Connect to any working Wi-Fi *Enable/disable the Airplane Mode *Monitor the data usage Connected devices *Turn on/off Bluetooth *Pair with Bluetooth devices and check the paired devices *Cast device and check the cast device *Add and check printers 03 EN Apps & notifications *Check the Apps recently opened *Check all the Apps on the tablet *Set the App permissions *Uninstall the third-party Apps *Adjust App notification settings *Clear the cache of the Apps Battery *Display the remaining battery power as a percentage *Enable/disable the Battery Saver *Adjust the time of entering the Sleep Mode Display *Adjust the screen brightness *Adjust the font size and display size *Set a screen saver *Change the wallpaper *Adjust the time of entering the Sleep Mode Sound *Set volume levels for media, alarms, and notifications *Set preferences of Do Not Disturb *Set the tunes for notifications and alarms *Turn on/off the sound for screen lock, charging and touch Screenshot *Set the delay time for a screenshot *Set the location folder of screenshots *Switch on/off Show the screenshot button in the statusbar Tip: Press the volume down button and the power button together to capture a screenshot. Or, switch on Show the screenshot button in the statusbar, then tap the icon on the bottom menu to capture a screenshot. 04 Storage *View and manage your storage space Security & location *Set screen lock pattern, e.g. password, PIN, Swipe etc. *Enable/disable all the notifications while the screen is locked *Turn on/off the location services for specific Apps *Set to show/hide the password when input a password Users & accounts *Add and manage the user accounts on your tablet Accessibility *For vision and hearing impaired users, manage settings for Screen readers, Subtitle , and more EN GoogleTM *Set the preferences for Google related services System * Set Language Tap Languages & input > Languages > +add a language to add your language. After adding, hold and slide the to the top to change the language. *Restore factory setting Tap Reset options > Erase all data (factory reset) to restore the factory setting. *Set the date and time *Turn on/off the Backup *Check the detailed information about the tablet 05 E NETWORK CONNECTION Go to Wi-Fi settings in the Settings interface or directly enter through Quick Settings. Wi- Fi Connection 1. Tap Network and Internet and turn on the Wi-Fi. All Wi-Fi connections available will be listed; 2. Select your Wi-Fi and input the correct password. Bluetooth Paring Please turn on the Bluetooth on your tablet and your bluetooth device. 1. Tap Connected devices and turn on the Bluetooth; 2. Tap Bluetooth > +pair new device to enter the scanning interface. Devices available will be displayed after a few seconds; 3. Tap the desired device to get a paring code and click PAIR on both devices. An automatic connection will be applied to some devices. 06 EN APP MANAGEMENT App Download and Installation 1. Tap and open Play Store on the Home screen; 2. Log into your google account, search and download the App you need. App Management Move the App Tap and hold the App, then slide it to a desired screen. Remove the App from the Home screen Tap and hold the App, then slide to X to remove it from your Home screen. Uninstall the App Tap and hold the App, then slide to the trash bin to uninstall the App. 07 EN Clear the Cache of the App 1. Go to Settings > Apps & notifications; 2. Select an App > Storage > CLEAR CACHE. 08 INTERNET NAVIGATION EN Please make sure the tablet is connected to a working Wi-Fi network before navigating the Interne…

Text truncated - open the document above for the full version.

Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(Internal Photos) BT/WIFI ANT Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※

Shenzhen DL Testing Technology Co., Ltd. EUT TEST PHOTO Radiated Measurement Photos Shenzhen DL Testing Technology Co., Ltd. Conducted Measurement Photos RF Conducted Test Photos ※※※※※ END OF REPORT ※※※※※

Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 52 ANNEX TEST DATA WIFI2.4G FCC ID: 2BNGZ-M10 Applicant: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen Manufacturer: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen Product Name: Tablet PC Trade Mark: N/A Model Number: M10, L10, TOUCH 10 Lite, TOUCH 10, TOUCH 10 SE, TOUCH 10 Air, TOUCH 10 pro, TOUCH 10 Plus, TOUCH 10 MAX, TAB 10 Lite, TAB 10 SE, TAB 10 Air, TAB 10, TAB 10 pro, TAB 10 Plus, TAB 10 MAX Date of Receipt: Jul. 23, 2026 Test Date: Jul. 23, 2026 – Aug. 05, 2026 Date of Report: Aug. 05, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024+Errata to C63.10a-2024 Test Result: Pass Report Number: DLE-260723018R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 52 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11b SISO 2412 0.938 0.975 96.21 0.17 0.03 2437 0.938 0.975 96.21 0.17 0.10 2462 0.937 0.974 96.20 0.17 0.07 802.11g SISO 2412 0.176 0.220 80.00 0.97 0.10 2437 0.176 0.221 79.64 0.99 0.11 2462 0.177 0.221 80.09 0.96 0.06 802.11n (HT20) SISO 2412 0.164 0.209 78.47 1.05 0.07 2437 0.166 0.208 79.81 0.98 0.20 2462 0.167 0.208 80.29 0.95 0.12 802.11n (HT40) SISO 2422 0.101 0.145 69.66 1.57 0.15 2437 0.101 0.162 62.35 2.05 7.67 2452 0.101 0.144 70.14 1.54 0.12 Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 52 1.2 Test Graph 1.2.1 Ant1 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 52 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 52 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 6 of 52 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 7 of 52 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 8 of 52 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 9 of 52 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 12.650 / Pass 2437 1 12.433 / Pass 2462 1 12.659 / Pass 802.11g SISO 2412 1 16.553 / Pass 2437 1 16.520 / Pass 2462 1 16.574 / Pass 802.11n (HT20) SISO 2412 1 17.688 / Pass 2437 1 17.680 / Pass 2462 1 17.732 / Pass 802.11n (HT40) SISO 2422 1 36.660 / Pass 2437 1 36.122 / Pass 2452 1 36.043 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 8.431 >=0.5 Pass 2437 1 7.982 >=0.5 Pass 2462 1 8.389 >=0.5 Pass 802.11g SISO 2412 1 16.154 >=0.5 Pass 2437 1 15.924 >=0.5 Pass 2462 1 16.164 >=0.5 Pass 802.11n (HT20) SISO 2412 1 17.229 >=0.5 Pass 2437 1 17.239 >=0.5 Pass 2462 1 17.270 >=0.5 Pass 802.11n (HT40) SISO 2422 1 36.375 >=0.5 Pass 2437 1 34.840 >=0.5 Pass 2452 1 31.874 >=0.5 Pass Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 10 of 52 2.2 Test Graph 2.2.1 OBW 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 11 of 52 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 12 of 52 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 13 of 52 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 14 of 52 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 15 of 52 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 16 of 52 2.2.2 6dB BW 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 17 of 52 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 18 of 52 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 19 of 52 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 20 of 52 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 21 of 52 802.11n(HT40)_MCH_24…

Text truncated - open the document above for the full version.

Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723018R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 34 FCC Part 15C Test Report FCC ID: 2BNGZ-M10 Applicant: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen Manufacturer: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen Product Name: Tablet PC Trade Mark: N/A Model Number: M10, L10, TOUCH 10 Lite, TOUCH 10, TOUCH 10 SE, TOUCH 10 Air, TOUCH 10 pro, TOUCH 10 Plus, TOUCH 10 MAX, TAB 10 Lite, TAB 10 SE, TAB 10 Air, TAB 10, TAB 10 pro, TAB 10 Plus, TAB 10 MAX Date of Receipt: Jul. 23, 2026 Test Date: Jul. 23, 2026 – Aug. 05, 2026 Date of Report: Aug. 05, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024+Errata to C63.10a-2024 Test Result: Pass Report Number: DLE-260723018R Prepared (Test Engineer): Ken Tan Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723018R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 34 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 MEASUREMENT UNCERTAINTY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 DESCRIPTION OF TEST MODES 6 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 6 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 7 2.5 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 7 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 8 3 . EMC EMISSION TEST 9 3.1 CONDUCTED EMISSION MEASUREMENT 9 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 9 3.1.2 TEST PROCEDURE 9 3.1.3 DEVIATION FROM TEST STANDARD 9 3.1.4 TEST SETUP 10 3.1.5 EUT OPERATING CONDITIONS 10 3.1.6 TEST RESULTS 10 3.2 RADIATED EMISSION MEASUREMENT 13 3.2.1 RADIATED EMISSION LIMITS 13 3.2.2 TEST PROCEDURE 14 3.2.3 DEVIATION FROM TEST STANDARD 14 3.2.4 TEST SETUP 14 3.2.5 EUT OPERATING CONDITIONS 15 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 16 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 17 3.2.8 TEST RESULTS (1GHZ~25GHZ) 19 3.3 RADIATED BAND EMISSION MEASUREMENT 23 3.3.1 TEST REQUIREMENT: 23 3.3.2 TEST PROCEDURE 23 3.3.3 DEVIATION FROM TEST STANDARD 23 3.3.4 TEST SETUP 24 3.3.5 EUT OPERATING CONDITIONS 24 3.4 CONDUCTED BAND EDGE EMISSION&CONDUCTED SPURIOUS EMISSIONS MEASUREMENT 29 3.4.1 APPLICABLE STANDARD 29 3.4.2 TEST PROCEDURE 29 3.4.3 DEVIATION FROM STANDARD 29 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723018R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 34 Table of Contents Page 3.4.4 TEST SETUP 29 3.4.5 EUT OPERATION CONDITIONS 29 3.4.6 TEST RESULTS 29 4 . AVERAGE OUTPUT POWER 30 4.1 APPLIED PROCEDURES / LIMIT 30 4.1.1 TEST PROCEDURE 30 4.1.2 DEVIATION FROM STANDARD 30 4.1.3 TEST SETUP 30 4.1.4 EUT OPERATION CONDITIONS 30 4.1.5 TEST RESULTS 30 5 . POWER SPECTRAL DENSITY TEST 31 5.1 APPLIED PROCEDURES / LIMIT 31 5.1.1 TEST PROCEDURE 31 5.1.2 DEVIATION FROM STANDARD 31 5.1.3 TEST SETUP 31 5.1.4 EUT OPERATION CONDITIONS 31 5.1.5 TEST RESULTS 31 6 . 6DB BANDWIDTH TEST 32 6.1 APPLIED PROCEDURES / LIMIT 32 6.1.1 TEST PROCEDURE 32 6.1.2 DEVIATION FROM STANDARD 32 6.1.3 TEST SETUP 32 6.1.4 EUT OPERATION CONDITIONS 32 6.1.5 TEST RESULTS 32 7 . DUTY CYCLE TEST SIGNAL 33 7.1 APPLIED PROCEDURES / LIMIT 33 7.1.1 TEST PROCEDURE 33 7.1.2 DEVIATION FROM STANDARD 33 7.1.3 TEST SETUP 33 7.1.4 EUT OPERATION CONDITIONS 33 7.1.5 TEST RESULTS 33 8 . ANTENNA REQUIREMENT 34 8.1 STANDARD REQUIREMENT 34 8.2 EUT ANTENNA 34 9 . TEST SETUP PHOTO 34 10 . EUT PHOTO 34 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723018R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 34 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.205, 15.209, 15.247(d) Radiated Spurious Emission PASS 15.209, 15.205 Band Edge Emission PASS 15.247(d) Conducted Spurious Emissions PASS 15.247(b) Average Output Power PASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Test lab: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China FCC Test Firm Registration Number: 854456 Designation Number: CN1307 IC Registered No.: 27485 CAB ID.: CN0118 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% 8 6dB Bandwidth ±0.2% 9 Power Spectral Density ±2.45dBm Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723018R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 34 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Tablet PC Trad…

Text truncated - open the document above for the full version.

Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 16 ANNEX TEST DATA BLE FCC ID: 2BNGZ-M10 Applicant: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen Manufacturer: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen Product Name: Tablet PC Trade Mark: N/A Model Number: M10, L10, TOUCH 10 Lite, TOUCH 10, TOUCH 10 SE, TOUCH 10 Air, TOUCH 10 pro, TOUCH 10 Plus, TOUCH 10 MAX, TAB 10 Lite, TAB 10 SE, TAB 10 Air, TAB 10, TAB 10 pro, TAB 10 Plus, TAB 10 MAX Date of Receipt: Jul. 23, 2026 Test Date: Jul. 23, 2026 – Aug. 05, 2026 Date of Report: Aug. 05, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Test Result: Pass Report Number: DLE-260723017R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 16 1. Bandwidth 1.1 Test Result 1.1.1 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.667 >=0.5 Pass 2440 1 0.666 >=0.5 Pass 2480 1 0.669 >=0.5 Pass Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 16 1.2 Test Graph 1.2.1 6dB BW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 16 1M_HCH_2480MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 16 2. Maximum Conducted Output Power 2.1 Test Result 2.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 1M SISO 2402 1.29 <=30 Pass 2440 0.39 <=30 Pass 2480 -0.86 <=30 Pass Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 6 of 16 2.2 Test Graph 2.2.1 Power 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 7 of 16 1M_HCH_2480MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 8 of 16 3. Maximum Power Spectral Density 3.1 Test Result 3.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm) Verdict ANT1 Limit(dBm/3kHz) 1M SISO 2402 -15.02dBm/3kHz <=8 Pass 2440 -15.80dBm/3kHz <=8 Pass 2480 -17.04dBm/3kHz <=8 Pass Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 9 of 16 3.2 Test Graph 3.2.1 PSD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 10 of 16 1M_HCH_2480MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 11 of 16 4. Unwanted Emissions In Non-restricted Frequency Bands 4.1 Test Result 4.1.1 Ref Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 1M SISO 2402 1 1.07 2440 1 0.14 2480 1 -1.09 4.1.2 CSE Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 1M SISO 2402 1 1.07 -18.93 Pass 2440 1 0.14 -19.86 Pass 2480 1 -1.09 -21.09 Pass Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 12 of 16 4.2 Test Graph 4.2.1 Ref 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 13 of 16 1M_HCH_2480MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 14 of 16 4.2.2 CSE 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 15 of 16 1M_MCH_2440MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 16 of 16 1M_HCH_2480MHz_Ant1_NTNV

Antenna Internal Antenna Location of (company name) Shenzhen Benton Technology Co. ,Ltd Antenna manufacturer: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen 测试条件 Test Conditions 常温环境下温度：21°C, 湿度：50%RH Humidity：50％,Temperature：21°C, 测试设备 Test Equipment SATIMO-OTA实验室；CMW500；MT8000；E5071C SATIMO-OTA Lab 测试环境 Test Ambient 温度(Temperature):____25___°C 湿度(Humidity):____40____RH 判定标准 Decision criteria 见下表TRP/TIS 故障判定标准 Look at the table of TRP and TIS OTA天线测试报告 1.External View Drawing: Antenna Photo & Length (mm)

Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723017R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 28 FCC Part 15C Test Report FCC ID: 2BNGZ-M10 Applicant: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen Manufacturer: Shenzhen Benton Technology Co. ,Ltd Address: 101-501, East Building, Factory Block 1, No. 4 Fuye Road, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen Product Name: Tablet PC Trade Mark: N/A Model Number: M10, L10, TOUCH 10 Lite, TOUCH 10, TOUCH 10 SE, TOUCH 10 Air, TOUCH 10 pro, TOUCH 10 Plus, TOUCH 10 MAX, TAB 10 Lite, TAB 10 SE, TAB 10 Air, TAB 10, TAB 10 pro, TAB 10 Plus, TAB 10 MAX Date of Receipt: Jul. 23, 2026 Test Date: Jul. 23, 2026 – Aug. 05, 2026 Date of Report: Aug. 05, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Test Result: Pass Report Number: DLE-260723017R Prepared (Test Engineer): Ken Tan Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723017R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 28 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 MEASUREMENT UNCERTAINTY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 DESCRIPTION OF TEST MODES 6 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 6 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 7 2.5 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 7 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 8 3 . EMC EMISSION TEST 9 3.1 CONDUCTED EMISSION MEASUREMENT 9 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 9 3.1.2 TEST PROCEDURE 9 3.1.3 DEVIATION FROM TEST STANDARD 9 3.1.4 TEST SETUP 10 3.1.5 EUT OPERATING CONDITIONS 10 3.1.6 TEST RESULTS 10 3.2 RADIATED EMISSION MEASUREMENT 13 3.2.1 RADIATED EMISSION LIMITS 13 3.2.2 TEST PROCEDURE 14 3.2.3 DEVIATION FROM TEST STANDARD 14 3.2.4 TEST SETUP 14 3.2.5 EUT OPERATING CONDITIONS 15 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 16 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 17 3.2.8 TEST RESULTS (1GHZ~25GHZ) 19 3.3 RADIATED BAND EMISSION MEASUREMENT 19 3.3.1 TEST REQUIREMENT: 20 3.3.2 TEST PROCEDURE 20 3.3.3 DEVIATION FROM TEST STANDARD 20 3.3.4 TEST SETUP 21 3.3.5 EUT OPERATING CONDITIONS 21 4 . PEAK OUTPUT POWER 25 4.1 APPLIED PROCEDURES / LIMIT 25 4.1.1 TEST PROCEDURE 25 4.1.2 DEVIATION FROM STANDARD 25 4.1.3 TEST SETUP 25 4.1.4 EUT OPERATION CONDITIONS 25 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723017R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 28 Table of Contents Page 4.1.5 TEST RESULTS 25 5 . POWER SPECTRAL DENSITY TEST 26 5.1 APPLIED PROCEDURES / LIMIT 26 5.1.1 TEST PROCEDURE 26 5.1.2 DEVIATION FROM STANDARD 26 5.1.3 TEST SETUP 26 5.1.4 EUT OPERATION CONDITIONS 26 5.1.5 TEST RESULTS 26 6 . 6DB BANDWIDTH TEST 27 6.1 APPLIED PROCEDURES / LIMIT 27 6.1.1 TEST PROCEDURE 27 6.1.2 DEVIATION FROM STANDARD 27 6.1.3 TEST SETUP 27 6.1.4 EUT OPERATION CONDITIONS 27 6.1.5 TEST RESULTS 27 7 . ANTENNA REQUIREMENT 28 7.1 STANDARD REQUIREMENT 28 7.2 EUT ANTENNA 28 8 . TEST SETUP PHOTO 28 9 . EUT PHOTO 28 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723017R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 28 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(c) Radiated Spurious Emission PASS 15.205 Band Edge Emission PASS 15.247(b)(1) Peak Output Power PASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(d) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Test lab: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China FCC Test Firm Registration Number: 854456 Designation Number: CN1307 IC Registered No.: 27485 CAB ID.: CN0118 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% 8 6dB Bandwidth ±0.2MHz 9 Power Spectral Density ±0.3dBm Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260723017R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 28 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Tablet PC Trademark N/A Model No.: M10, L10, TOUCH 10 Lite, TOUCH 10, TOUCH 10 SE, TOUCH 10 Air, TOUCH 10 pro, TOUCH 10 Plus, TOUCH 10 MAX, TAB 10 Lite, TAB 10 SE, TAB 10 Air, TAB 10, TAB 10 pro, TAB 10 Plus, TAB 10 MAX Model Difference All the models are the same as the sample, except for the model name, color and appearance (the shape and design of the casing), their structure and circuitry are exactly the same. Operation Frequency: 2402~2480MHz Channel numbers: 40 Channels Channel separation: 2MHz Modulation …

Text truncated - open the document above for the full version.

FCC ID: 2BNGZ-M10 RF Exposure Evaluation According to KDB 447498 D01 V06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f (GHz) ] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f (GHz) is the RF channel transmit frequency in GHz Power and distance ar…

Text truncated - open the document above for the full version.