2BNMLKV-016Portable Karaoke Machine

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Shenzhen Daisi Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company: Shenzhen Daisi Technology Co., Ltd. Address: 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Product Name: Portable Karaoke Machine Model Number(s): KV-016 FCC ID: 2BNMLKV-016 2.911(d)(5)(i) Equipment Type We, [Shenzhen Daisi Technology Co., Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Jiankuai Li Date: 2026.01.10 Title and Company name: PM,SHENZHEN STS TEST SERVICES CO., LTD. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Daisi Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company: Shenzhen Daisi Technology Co., Ltd. Address: 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Product Name: Portable Karaoke Machine Model Number(s): KV-016 FCC ID: 2BNMLKV-016 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Daisi Technology Co., Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Jiankuai Li Date: 2026.01.10 Title and Company name: PM,SHENZHEN STS TEST SERVICES CO., LTD. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Daisi Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Daisi Technology Co., Ltd. Address: 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Product Name: Unicorn Karaoke Machine FCC ID: 2BNMLKV-016 Model(s): KV-016 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Daisi Technology Co., Ltd.] (“the applicant”) designate [AOGES CO., LIMITED] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: AOGES CO., LIMITED USA Address: 1624 Market St, Ste 226, #30327 Denver CO, 80202 USA FRN Number: 0033947847 Contact Name: XIAOYAN LAl Telephone No: +1 303 623 1940 Email: [email protected] Applicant Company name: Shenzhen Daisi Technology Co., Ltd. Address: 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Grantee FRN Number: 0036576304 FCC Grantee Code: 2BNML Contact Name: Dai Simei Telephone No: 13751082250 Email: [email protected] Shenzhen Daisi Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.5 Signature: Title: GM Signature: Title: Manager Date: 2026.01.10 Date: 2026.01.10 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Shenzhen Daisi Technology Co., Ltd. Agent Authorization Company: Shenzhen Daisi Technology Co., Ltd. Address: 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Product Name: Portable Karaoke Machine Model Number(s): KV-016 Product Description: Portable Karaoke Machine We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2026.01.10 Name: Jiankuai Li Title: PM Company: SHENZHEN STS TEST SERVICES CO., LTD.

Shenzhen Daisi Technology Co., Ltd. Authorization Letter We, (the approval holder) Company name Shenzhen Daisi Technology Co., Ltd. Address 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China declare that the following representative (agent): Name (person) Bovey Yang Company name SHENZHEN STS TEST SERVICES CO.,LTD. Addresss 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub- District, Bao’an District, Shenzhen, Guang Dong, China City Shenzhen Country China to act on our behalf on all matters concerning the application and documents submitted to Micom Labs for product certification below Product Description Portable Karaoke Machine Type or Model(s) KV-016 Tradename or Brand(s) N/A FCC ID 2BNMLKV-016 Signature: Date: 2026.01.10 Name: Jiankuai Li Title: PM Company: SHENZHEN STS TEST SERVICES CO., LTD.

2025.10.27 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeSHENZHENSTSTESTSERVICESCO.,LTD./A1/F,Building B,ZhuokeSciencePark,No.190ChongqingRoad,HepingShequ,FuyongSub-District,Bao’anDistrict, Shenzhen,GuangDong,China/JiankuaiLi(NameofAgentcompanynameandaddress,NameofAgent) toactonourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthe signingofalldocumentsrelatingtothesematters. ThisappointmentisvaliduntilfurtherDecember31,2026. Name:JiankuaiLi Title:PM E-mail:[email protected] Name:DaiSimei Title:PM E-mail:[email protected] Company: ShenzhenDaisiTechnologyCo.,Ltd. Signature:

Shenzhen Daisi Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025.10.28 Subject; Request for Confidentiality FCC ID: 2BNMLKV-016 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Part List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: Date: 2026.01.10 Name: Jiankuai Li Title: PM Company: SHENZHEN STS TEST SERVICES CO., LTD.

Page 1 of 4 Report No.: STS2512292 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: KV-016 Photo 1 Photo 2 Page 2 of 4 Report No.: STS2512292 Photo 3 Photo 4 Page 3 of 4 Report No.: STS2512292 Photo 5 Photo 6 Page 4 of 4 Report No.: STS2512292 Photo 7 Photo 8

FCC Label 2CM*4CM Model: KV-016 FCC ID: 2BNMLKV-016

Page 1 of 4 Report No.: STS2512292 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: KV-016 Photo 1 Photo 2 Page 2 of 4 Report No.: STS2512292 Photo 3 Photo 4 Antenna Page 3 of 4 Report No.: STS2512292 Photo 5 Photo 6 Page 4 of 4 Report No.: STS2512292 Photo 7 Photo 8

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.:STS2512292H01 Issued for Shenzhen Daisi Technology Co., Ltd. 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Product Name: Portable Karaoke Machine Brand Name: DEOZHANG Model Name: KV-016 Series Model(s): N/A FCC ID: 2BNMLKV-016 Test Standards: FCC 47CFR §2.1093 Page 2 of 9 Report No.: STS2512292H01 TEST REPORT Applicant’s Name ................. : Shenzhen Daisi Technology Co., Ltd. Address .................................. : 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Daisi Technology Co., Ltd. Address .................................. : 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Product Description Product Name ........................ : Portable Karaoke Machine Brand Name ........................... : DEOZHANG Model Name........................... : KV-016 Series Model(s) ...................... : N/A Test Standards ..................... : FCC 47CFR §2.1093 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ............................................ : Date of receipt of test item ...................... : 26 Dec. 2025 Date (s) of performance of tests.............. : 26 Dec. 2025 ~ 07 Jan. 2026 Date of Issue ........................................... : 07 Jan. 2026 Test Result ............................................... : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 9 Report No.: STS2512292H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 9 Page 4 of 9 Report No.: STS2512292H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 07 Jan. 2026 STS2512292H01 ALL Initial Issue Page 5 of 9 Report No.: STS2512292H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Portable Karaoke Machine Brand Name DEOZHANG Model Name KV-016 Series Model(s) N/A Model Difference N/A Product Description The EUT is Portable Karaoke Machine Operation Frequency: 2402 – 2480 MHz Modulation Type: BT BR(1Mbps): GFSK BT EDR(2Mbps): π/4-DQPSK Antenna gain: -0.58dBi Antenna Designation: PCB Power Rating Input: DC 5V 1A Adapter N/A Battery N/A Hardware Version N/A Software Version N/A 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 9 Report No.: STS2512292H01 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 7 of 9 Report No.: STS2512292H01 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . Page 8 of 9 Report No.: STS2512292H01 For multiple RF sources: Multiple RF sources are exempt if: (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). Th…

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dBi Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Model:KV-016 Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2512292W01 Issued for Shenzhen Daisi Technology Co., Ltd. 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Product Name: Portable Karaoke Machine Brand Name: DEOZHANG Model Name: KV-016 Series Model(s): N/A FCC ID: 2BNMLKV-016 Test Standards: FCC Part15.247 Page 2 of 78 Report No.: STS2512292W01 TEST REPORT Applicant’s Name ................. : Shenzhen Daisi Technology Co., Ltd. Address .................................. : 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer's Name ........... : Shenzhen Daisi Technology Co., Ltd. Address .................................. : 807, 8th Floor, Building 7, Lane 5, Wuhe Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Product Description Product Name ........................ : Portable Karaoke Machine Brand Name ........................... : DEOZHANG Model Name ........................... : KV-016 Series Model(s) .................... : N/A Standards .............................. : FCC Part15.247 Test Procedure ....................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ................................ : Date of receipt of test item .......... : 26 Dec. 2025 Date (s) of performance of tests . : 26 Dec. 2025 ~ 07 Jan. 2026 Date of Issue .............................. : 07 Jan. 2026 Test Result .................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 78 Report No.: STS2512292W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 10 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 12 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 14 2.7 EQUIPMENTS LIST 15 3. EMC EMISSION TEST 16 3.1 CONDUCTED EMISSION MEASUREMENT 16 3.2 RADIATED EMISSION MEASUREMENT 20 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 32 4.1 LIMIT 32 4.2 TEST PROCEDURE 32 4.3 TEST SETUP 32 4.4 EUT OPERATION CONDITIONS 32 4.5 TEST RESULTS 32 5. NUMBER OF HOPPING CHANNEL 33 5.1 LIMIT 33 5.2 TEST PROCEDURE 33 5.3 TEST SETUP 33 5.4 EUT OPERATION CONDITIONS 33 5.5 TEST RESULTS 33 6. AVERAGE TIME OF OCCUPANCY 34 6.1 LIMIT 34 6.2 TEST PROCEDURE 34 6.3 TEST SETUP 34 6.4 EUT OPERATION CONDITIONS 34 6.5 TEST RESULTS 34 7. HOPPING CHANNEL SEPARATION MEASUREMEN 35 7.1 LIMIT 35 Page 4 of 78 Report No.: STS2512292W01 Table of Contents Page 7.2 TEST PROCEDURE 35 7.3 TEST SETUP 35 7.4 EUT OPERATION CONDITIONS 35 7.5 TEST RESULTS 35 8. BANDWIDTH TEST 36 8.1 LIMIT 36 8.2 TEST PROCEDURE 36 8.3 TEST SETUP 36 8.4 EUT OPERATION CONDITIONS 36 8.5 TEST RESULTS 36 9. OUTPUT POWER TEST 37 9.1 LIMIT 37 9.2 TEST PROCEDURE 37 9.3 TEST SETUP 38 9.4 EUT OPERATION CONDITIONS 38 9.5 TEST RESULTS 38 10. ANTENNA REQUIREMENT 39 10.1 STANDARD REQUIREMENT 39 10.2 EUT ANTENNA 39 APPENDIX 1-TEST DATA 40 DWELL TIME 40 MAXIMUM PEAK CONDUCTED OUTPUT POWER 47 -20DB BANDWIDTH 51 CARRIER FREQUENCIES SEPARATION 55 NUMBER OF HOPPING CHANNEL 59 BAND EDGE 61 BAND EDGE(HOPPING) 66 CONDUCTED RF SPURIOUS EMISSION 71 APPENDIX 2-PHOTOS OF TEST SETUP 78 Page 5 of 78 Report No.: STS2512292W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 07 Jan. 2026 STS2512292W01 ALL Initial Issue Page 6 of 78 Report No.: STS2512292W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time PASS -- 15.247(a)(1) Bandwidth PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 78 Report No.: STS2512292W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Duty Cycle ±3.2% Page 8 of 78 Report N…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2BNMLKV-016 Test Setup Photo AC Conduction RF Conduction Page 2 of 2 FCC ID: 2BNMLKV-016 RE (Below 1GHz) RE (Above 1GHz)