2BNOR-PC-15-1CPixCharge Power Bank

Rev 1/26/2023 SHENZHEN ORICO TECHNOLOGIES CO., LTD. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-19-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BNOR-PC-15-1C [SHENZHEN ORICO TECHNOLOGIES CO., LTD.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [SHENZHEN ORICO TECHNOLOGIES CO., LTD.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Abel Chen Rev 1/26/2023 SHENZHEN ORICO TECHNOLOGIES CO., LTD. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-19-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BNOR-PC-15-1C [SHENZHEN ORICO TECHNOLOGIES CO., LTD.] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Abel Chen

SHENZHEN ORICO TECHNOLOGIES CO., LTD. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: May 19, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BNOR-PC-15-1C SHENZHEN ORICO TECHNOLOGIES CO., LTD. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: SHENZHEN ORICO TECHNOLOGIES CO., LTD. FRN: 0036766731 Address: 1903-1904,14A, Zhonghaixin Innovation Industrial Park, no.12, GanLee Sixth Road, Gankeng Community, Jihua Street, Shenzhen, China Signature: Contact Person: Abel Chen Tel: +86-18002622305 Email: [email protected]

SHENZHEN ORICO TECHNOLOGIES CO., LTD. Date: May 19, 2026 Product Model Number: PC-15-1C, PC2-15-1C, PC3-15-1C, PC4-15-1C, PC5-15-1C FCC ID: 2BNOR-PC-15-1C To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature： By: Abel Chen Title: Manager Tel.: +86-18002622305 Email: [email protected] On behalf of: SHENZHEN ORICO TECHNOLOGIES CO., LTD.

SHENZHEN ORICO TECHNOLOGIES CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 19, 2026 Subject; Request for Confidentiality FCC ID: 2BNOR-PC-15-1C To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature： By: Abel Chen Title: Manager

SHENZHEN ORICO TECHNOLOGIES CO., LTD. Model Difference Statement Date: May 19, 2026 Product Model Number: PC-15-1C, PC2-15-1C, PC3-15-1C, PC4-15-1C, PC5-15-1C FCC ID: 2BNOR-PC-15-1C Dear Sir/Madam, Added models PC2-15-1C, PC3-15-1C, PC4-15-1C, PC5-15-1C basis of the original product PC-15-1C The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Signature： By: Abel Chen Title: Manager Tel.: +86-18002622305 Email: [email protected] On behalf of: SHENZHEN ORICO TECHNOLOGIES CO., LTD.

Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C Annex A. EUT External Photos Model: PC-15-1C EUT View 1 EUT View 2 Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C EUT View 3 EUT View 4 Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C EUT View 5 EUT View 6 Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C EUT View 7 EUT View 8

Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C Annex D. Label FCC Label Sample Label Size: 1.5cm*1cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C Annex B. EUT Internal Photos EUT View 1 EUT View 2 Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C EUT View 3 EUT View 4 Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C EUT View 5 EUT View 6 Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C EUT View 7 EUT View 8

FCC ID: 2BNOR-PC-15-1C RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 0.8 0(±1) 1 1.26 2480 5 0.396849 3.0 So a SAR test is not required

Project Name:Pixel screen built-in line movement source project RF Engineer: Li Feihu Testing Date: 2025-10-23 FrequencyRange:WIFI/BT 2.4GHz 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd. Shenzhen Y angyue Electronic Communication Technology Co., Ltd. Building B, Industrial Park of Hezhou Zhongkenuo, Hezhou Community, Hangcheng Subdistrict, Bao'an District, Shenzhen City DateRevisionDescription of changes 2025-10-23TA UC Revision History 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd. NO.ITEMSDETAILS 1 工作频段 Operatingband WiFi/BT 2.4GHz 2 频率范围 Frequency range WiFi:2400~2500(MHz) 3 天线类型 Antenna Type 4 PCB 5 主板版本 The mainboardversion TR2502H108-04 6 输入阻抗 InputImpedance 50 （ Ω ） 7 增益 Gain Peak Gain ： -2.0 dBi (YZ-V) Average Gain ： -5.0 dBi (YZ-V) 8 极化方式 Polarization Vertical polarization + horizontal polarization RF Li Feihu ME 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd. Antenna type PCB ANT 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd. 2.Antenna physical object and physical dimensions Typical Electrical Characteristics 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd. Typical Radiation Patterns @ 2.44GHz XY-plane 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd. Typical Radiation Patterns @ 2.44GHz XZ-plane 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd. Typical Radiation Patterns @ 2.44GHz YZ-plane 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd. The end , thanks! 深圳市扬跃电子通信科技有限公司 Shenzhen Yangyue Electronic Communication Technology Co., Ltd.

Report No: DSP26040871-1E FCC Test Report Page 1 of 33 FCC TEST REPORT FCC ID: 2BNOR-PC-15-1C Report No. : DSP26040871-1E Applicant : SHENZHEN ORICO TECHNOLOGIES CO., LTD. Product Name : PixCharge Power Bank Model Name : PC-15-1C Test Standard : FCC Part 15.247 Date of Issue : 2026-04-27 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: DSP26040871-1E FCC Test Report Page 2 of 33 Test Report Basic Information Applicant..................................: SHENZHEN ORICO TECHNOLOGIES CO., LTD. Address of Applicant...............: 1903-1904,14A, Zhonghaixin Innovation Industrial Park, no.12, GanLee Sixth Road, Gankeng Community, Jihua Street, Shenzhen, China Manufacturer..........................: SHENZHEN ORICO TECHNOLOGIES CO., LTD. Address of Manufacturer........: 1903-1904,14A, Zhonghaixin Innovation Industrial Park, no.12, GanLee Sixth Road, Gankeng Community, Jihua Street, Shenzhen, China Product Name.........................: PixCharge Power Bank Brand Name.............................: - Main Model..............................: PC-15-1C Series Models..........................: PC2-15-1C, PC3-15-1C, PC4-15-1C, PC5-15-1C Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-04-17 to 2026-04-25 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: DSP26040871-1E FCC Test Report Page 3 of 33 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results ..................…

Text truncated - open the document above for the full version.

Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C Annex C. Test Photos Radiated Emission Test View 1 Radiated Emission Test View 2 Report No: DSP2604087-1E FCC ID: 2BNOR-PC-15-1C Conducted Emission Test View 1