2BNP5-JF168LED Strip Light

Jiangxi Jifa Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [September 15, 2026] U.S. Agent Designation [Jiangxi Jifa Technology Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BNP5-JF168 Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Jiangxi Jifa Technology Co., Ltd.]. [Jiangxi Jifa Technology Co., Ltd.] with the FRN [0036660777] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [wen long kuan] [Huiying Fan] [MANAGER] [Director] [Jiangxi Jifa Technology Co., Ltd.] [GLOCERTS TECHNOLOGY INC]

Jiangxi Jifa Technology Co., Ltd. (September 9, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BNP5-JF168 [Jiangxi Jifa Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) wen long kuan Jiangxi Jifa Technology Co., Ltd. (September 9, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BNP5-JF168 [Jiangxi Jifa Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) wen long kuan

Jiangxi Jifa Technology Co., Ltd. (September 9, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (LED Strip Light / JF168 / FCC ID: 2BNP5-JF168 ) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: wen long kuan Title: MANAGER

Jiangxi Jifa Technology Co., Ltd. (September 9, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen NTT Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: wen long kuan Title: MANAGER

FCC ID: 2BNP5-JF168 External Photos

FCC ID LABEL: Label Location: FCC ID: 2BNP5-JF168 Model No.: JF168

FCC ID: 2BNP5-JF168 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1091，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation So a SAR test is not required Operating Mode Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power Density at R=20cm Power Density Limit Result (MHz) (dBm) (dBm) (dBm) (dBi) (mW/cm 2 ) (mW/cm 2 ) BLE 2402-2480 0.345 0±1 1 0 0.00025 1.0 PASS

Antenna describe 1. Antenna describe: Antenna plate PCB ANTENNA Make name/model name PDT-002 Antenna gain 0dBi Frequency range 2.4GHZ-2.483GHZ Connector type direct Laboratory Name: DONGGUANG XIAOKE INDUSTRLES.CO.,LTD Laboratory Address: NO. 227, DONGCHENG SECTION, GUANDONG ROAD, DONGCHENG STREET, DONGGUAN CITY,CHINA 2.External view drawing: Picture of antenna Antenna Dimensions L1 2.15 mm L2 1.20 mm L3 1.95 mm W1 0.35 mm W2 0.35 mm D1 1.25 mm D2 1.65 mm D3 0.50 mm 3.Antenna Radiation Pattern Radiation [email protected] Total Average Gain: - 0.475 dbi 0 45 90 135 180 235 270 315 Phi Gain - 0.2 - 0.3 - 0.8 - 0.5 - 0.2 - 0.5 - 0.8 - 0.5 Radiation [email protected] Total Average Gain: - 0.275 dbi 0 45 90 135 180 235 270 315 Phi Gain 0 - 0.2 - 0.4 - 0.6 - 0.1 - 0.3 - 0.6 - 0.4 Radiation [email protected] Total Average Gain: - 0.237 dbi 0 45 90 135 180 235 2 70 315 Phi Gain 0 - 0.2 - 0.3 - 0.5 0 - 0.3 - 0.6 - 0.2

ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26036055E1-1 SZNTT-TR828-0Tel:0755-27889935Web:http://www.ntt-testing.comPage1of35 TESTREPORT Applicant: JiangxiJifaTechnologyCo.,Ltd. Address: 50meterssouthofJinshanAvenue,SouthofYuIndustrialPark, HuangbuTown,ShanghuCounty,GanzhouCity,JiangxiProvince, China Manufacturer: JiangxiJifaTechnologyCo.,Ltd. Address: 50meterssouthofJinshanAvenue,SouthofYuIndustrialPark, HuangbuTown,ShanghuCounty,GanzhouCity,JiangxiProvince, China ProductName: LEDStripLight ModelNumber:JF168 Trademark:N/A FCCID:2BNP5-JF168 TestDate: Aug.11,2026toSep.01,2026 DateofReport: Sep.01,2026 TestResult: ThisdevicedescribedabovehasbeentestedbyNTT,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheStandardrequirements.Anditisapplicableonlytothetested sampleidentifiedinthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10-2020+Cor.1-2023+C63.10a-2024+Erratato C63.10a-2024 KDB558074D0115.247MeasGuidancev05r02 Preparedby(TestEngineer): GaryLu Approved(Manager): CindyQin Approved(Manager): AbelYu ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26036055E1-1 SZNTT-TR828-0Tel:0755-27889935Web:http://www.ntt-testing.comPage2of35 TABLEOFCONTENT 1.GeneralInformation......................................................................................4 1.1.DescriptionofDevice(EUT).......................................................................................................................4 1.2.ChannelList..................................................................................................................................................4 1.3.Summaryoftestresult................................................................................................................................5 1.4.SpecialAccessoriesandAuxiliaryEquipment........................................................................................5 1.5.Testmode......................................................................................................................................................5 1.6.Testconfiguration.........................................................................................................................................5 1.7.BlockDiagram...............................................................................................................................................6 1.8.TestConditions.............................................................................................................................................6 1.9.MeasurementUncertainty(95%confidencelevels,k=2)......................................................................6 1.10.TestFacility..................................................................................................................................................7 1.11.TestEquipment...........................................................................................................................................8 2.Conductedemissionatthemainsterminalstest....................................10 2.1.Limit..............................................................................................................................................................10 2.2.TestSetup....................................................................................................................................................10 2.3.TestProcedure............................................................................................................................................10 2.4.TestResult...................................................................................................................................................11 3.RadiatedSpuriousEmissions...................................................................13 3.1.Limit..............................................................................................................................................................13 3.2.TestSetup....................................................................................................................................................14 3.3.TestProcedure............................................................................................................................................16 3.4.TestResult...................................................................................................................................................17 4.ConductedSpuriousEmissions................................................................22 4.1.Limit..............................................................................................................................................................22 4.2.TestSetup....................................................................................................................................................22 4.3.TestProcedure............................................................................................................................................22 4.4.TestResult...................................................................................................................................................23 5.BandEdgeMeasurement...........................................................................24 5.1.Limit..............................................................................................................................................................24 5.2.Testsetup....................................................................................................................................................24 5.3.TestProcedure............................................................................................................................................24 5.4.TestResult..................................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2BNP5-JF168 Test Photos