2BNPB-AR401P-25Argon ONE UP CM5 Laptop

ARGON 40 TECHNOLOGIES LIMITED Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [December 30, 2025] U.S. Agent Designation [ARGON 40 TECHNOLOGIES LIMITED] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BNPB-AR401P-25 Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [ARGON 40 TECHNOLOGIES LIMITED]. [ARGON 40 TECHNOLOGIES LIMITED] with the FRN [0036664308] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Nick Wu] [Huiying Fan] [manager] [Director] [ARGON 40 TECHNOLOGIES LIMITED] [GLOCERTS TECHNOLOGY INC]

ARGON 40 TECHNOLOGIES LIMITED (December 30, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID:2BNPB-AR401P-25 [ARGON 40 TECHNOLOGIES LIMITED] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name)Nick Wu ARGON 40 TECHNOLOGIES LIMITED (December 30, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID:2BNPB-AR401P-25 [ARGON 40 TECHNOLOGIES LIMITED] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name)Nick Wu

ARGON 40 TECHNOLOGIES LIMITED (December 30, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Argon ONE UP CM5 Laptop / A25-001- ONE-UP-14 / FCC ID: 2BNPB-AR401P-25 ) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Nick Wu Title: manager

ARGON 40 TECHNOLOGIES LIMITED (December 30, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Nick Wu Title: manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 3 Model: A25-001-ONE-UP-14 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 3 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 3

45.35 mm 40.00 mm 133.30 mm

Shenzhen CTB Testing Co., Ltd. FCC ID: 2BNPB-AR401P-25 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BLE1M: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 -0.855 0.820±11.001.26<50.390233.00YES 2.441 0.763 1.190±11.001.26<50.393383.00YES 2.480 0.553 1.140±11.001.26<50.396513.00YES GFSK BLE2M: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 -0.824 0.830±11.001.26<50.390233.00YES 2.441 0.809 1.200±11.001.26<50.393383.00YES 2.480 0.63 1.160±11.001.26<50.396513.00YES GFSK EDR: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 -0.698 0.850±11.001.26<50.390233.00YES 2.441 0.899 1.230±11.001.26<50.393383.00YES 2.480 0.7 1.170±11.001.26<50.396513.00YES 2.402 0.103 1.020±11.001.26<50.390233.00YES 2.441 0.579 1.140±11.001.26<50.393383.00YES 2.480 0.268 1.060±11.001.26<50.396513.00YES 2.402 -0.263 0.940±11.001.26<50.390233.00YES 2.441 0.854 1.220±11.001.26<50.393383.00YES 2.480 0.532 1.130±11.001.26<50.396513.00YES GFSK π /4DQPSK 8DQPSK Shenzhen CTB Testing Co., Ltd. 2.4GWIFI: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.412 4.842 3.054±15.003.16<50.982243.00YES 2.437 4.462 2.794±15.003.16<50.987323.00YES 2.462 4.581 2.874±15.003.16<50.992373.00YES 2.412 4.469 2.804±15.003.16<50.982243.00YES 2.437 3.757 2.383±14.002.51<50.784263.00YES 2.462 4.83 3.044±15.003.16<50.992373.00YES 2.412 4.535 2.844±15.003.16<50.982243.00YES 2.437 3.896 2.453±14.002.51<50.784263.00YES 2.462 4.352 2.724±15.003.16<50.992373.00YES 2.422 4.149 2.604±15.003.16<50.984283.00YES 2.437 4.425 2.774±15.003.16<50.987323.00YES 2.452 4.87 3.074±15.003.16<50.990353.00YES 802.11b 802.11g 802.11n( HT20) 802.11n( HT40) 5GWIFI: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 5.184.628 2.904±15.003.16<51.439443.00YES 5.24.66 2.924±15.003.16<51.442223.00YES 5.244.408 2.764±15.003.16<51.447763.00YES 5.183.994 2.513±14.002.51<51.143393.00YES 5.24.943 3.124±15.003.16<51.442223.00YES 5.244.77 3.004±15.003.16<51.447763.00YES 5.193.879 2.443±14.002.51<51.144493.00YES 5.234.666 2.934±15.003.16<51.446373.00YES 5.184.25 2.664±15.003.16<51.439443.00YES 5.23.924 2.473±14.002.51<51.145603.00YES 5.244.825 3.044±15.003.16<51.447763.00YES 5.194.732 2.974±15.003.16<51.440833.00YES 5.234.685 2.944±15.003.16<51.446373.00YES 802.11n( HT20) 802.11n( HT40) 802.11a2 0 802.11ac 20 802.11ac 40 Conclusion: For the max result : 1.44776≤ FCC Limit 3.0 for 1g SAR.

601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen Customer Name：bmorn Project Name：N14PY0 (14 inch metal shell BM-NBRBP1 Raspberry Pi platform) Date：2025.04.29 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen Customer contact person: Mobile: Email: Soward RF: Xiao Chunyan mobile phone: Phone: 0755-29985185 Email: [email protected] Soward structure: mobile phone: Phone: 0755-29985185 Email: [email protected] 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen 1.Project Overview Number of project antennas Machine type 1WIFI notebook Material of the whole machine shell: 14 inch metal shell (A/C/D metal shell, antenna position shaft) 2.Antenna Overview Antenna number nameWorking frequency band/MHz Material/Struct ure 1WIFI&BT&5Gwifi2400MHz ~ 2500MHz & 5.8GHzFPC 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen antenna manufacturerShenzhen SWARD Communication Technology Co., Ltd. address 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen Antenna Specifications Part number: SF2286E-1L1G-120-A，Antenna size: 29.40mm * 9.00mm， antenna manufacturer：120mm，1st generation terminal 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen Antenna layout WIFI antenna 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen WIFI antenna S11 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen BT antenna measured distance Actual test effect Model number 1 test environment Soward R&D Center test equipment Huawei AM08 test distance - Bluetooth can establish a connection, but the audio source cannot be switched and has not been tested； 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen WIFI&BT antenna efficiency Passive Test For 2.4Gwifi FreqEffiEffiGainGainUHISDHISMaxMin (MHz)(%)(dB)(dBi)(dBd)(%)(%)(dB)(dB) 240035.75-4.472.570.4225.00810.7462.57-20.49 241034.93-4.572.560.4124.50210.4242.56-22.33 242043.48-3.623.641.4930.45613.0193.64-24.99 243046.01-3.374.011.8632.19113.8234.01-26.89 244051.03-2.924.462.3135.47115.5614.46-23.69 245042.68-3.73.611.4629.60913.0733.61-20.98 246043.17-3.653.511.3629.813.373.51-18.82 247038.53-4.142.810.6626.5711.962.81-17.69 248041.85-3.783.080.9328.68613.163.08-16.52 249044.48-3.523.31.1530.45314.0253.3-15.52 250049.74-3.033.691.5433.61116.1283.69-14.15 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen 5G WIFI antenna efficiency Passive Test For 5Gwifi FreqEffiEffiGainGainUHISDHISMaxMin (MHz)(%)(dB)(dBi)(dBd)(%)(%)(dB)(dB) 500016.48-7.83-2.11-4.268.3438.134-2.11-24.57 510017.57-7.55-2.51-4.669.0378.529-2.51-22.88 520018.61-7.3-2.46-4.6110.2128.401-2.46-16.43 530032.21-4.920.81-1.3419.79912.4120.81-18.6 540026.48-5.77-0.1-2.2517.1119.366-0.1-18.81 550027.85-5.550.15-217.4210.4320.15-17.61 560027.37-5.630.38-1.7717.05510.3190.38-15.18 570030.49-5.16-0.28-2.4319.17411.319-0.28-15.64 580028.92-5.390.16-1.9918.35110.5740.16-16.92 590032.8-4.840.96-1.1920.91411.8840.96-14.05 600031.34-5.041.41-0.7420.89610.4421.41-14.89 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen WIFI antenna signal strength measurement picture (data) test locationOur R&D office Test group2.4G/5G-Distance of 15 meters 2.4G/5G-Distance of 10 meters2.4G/5G-Distance of 5 meters test frequency 2.4Gwifi5Gwifi2.4Gwifi5Gwifi2.4Gwifi5Gwifi signal strength-44dBm-53dBm-35dBm--45dBm-28dBm-40dBm 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen Antenna matching main antenna 123456Remarks Original Match Change Matching RＦ ２ 1 3 5 4 6 antenna No antenna matching has been changed。 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen Environmental treatment and assembly instructions 1. Suggest adding conductive cloth to connect the rotating shaft to the metal frame; 2. Suggest adding absorbing materials to both sides of the SSD for shielding treatment. 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen Debugging log 1.2025.04.19, received the machine and debugged antenna 1; 2.2025.04.21, testing exception, received code debugging machine after communicating with the customer; 3.2025.04.22, testing machine data abnormality, communication transmission and machine point testing; 4.2025.04.25, antenna samples were received and the verification effect was preliminarily OK. The machine was arranged to reinstall the antenna and retest to confirm stability; 5.2025.04.27, the retest effect is basically okay, arrange for the sample machine to be returned; 601, 6th Floor, Building B, Hexi Hangcheng Industrial Zone, 135 Qianjin Er Road, Bao'an District, Shenzhen Note: 1. This report is based on the actual debugging and testing of the prototype, including environmental treatment, antenna position, and assembly position of each component Cannot be changed arbitrarily; If there are any changes in the materials used in the prototype, please promptly provide feedback to our company for further verification; 3. List of sensitive components: TP (Material, Coating, Wiring, etc.) Screen (amplifier circuit, LED, cable design, etc.) Shell material (antenna assembly method, structural interference, shell material, antenna position height and area, etc.) Motherboard (motherboard conduction, RF circuit matching, PA, dual power, filtering, etc.) LNA， Power supply circuit, etc Camer…

Text truncated - open the document above for the full version.

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 41 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Argon ONE UP CM5 Laptop FCC ID: 2BNPB-AR401P-25 Trademark(s): ARGON FORTY Model/Type reference: A25-001-ONE-UP-14 Applicant’s name: ARGON 40 TECHNOLOGIES LIMITED Address: RM C 20/F LUCKY PLAZA 315-321 LOCKHART RD WAN CHAI HONG KONG Manufacturer: ARGON 40 TECHNOLOGIES LIMITED Address: RM C 20/F LUCKY PLAZA 315-321 LOCKHART RD WAN CHAI HONG KONG Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: No v. 12, 2025 Sample tested Date: No v. 12, 2025 to Dec. 03, 2025 Issue Date: Dec. 03, 2025 Report No.: CTB25111208803RF01 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25111208803RF01 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 41 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................ 3 2. TEST SUMMARY ........................................................................................................................... 4 3. MEASUREMENT UNCERTAINTY ................................................................................................. 5 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................ 6 4.1 Product Information .......................................................................................................................... 6 4.2 Test Setup Configuration .................................................................................................................. 6 4.3 Support Equipment........................................................................................................................... 6 4.4 Channel List ..................................................................................................................................... 7 4.5 Test Mode ........................................................................................................................................ 7 4.6 Test Environment ............................................................................................................................. 7 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................................................... 8 5.1 Test Facility ...................................................................................................................................... 8 5.2 Test Instrument Used ....................................................................................................................... 8 6. AC POWER LINE CONDUCTED EMISSION ................................................................................ 11 6.1 Block Diagram Of Test Setup ......................................................................................................... 11 6.2 Limit ................................................................................................................................................ 11 6.3 Test procedure ............................................................................................................................... 11 6.4 Test Result ..................................................................................................................................... 13 7. RADIATED SPURIOUS EMISSION ............................................................................................. 15 7.1 Block Diagram Of Test Setup ......................................................................................................... 15 7.2 Limit ................................................................................................................................................ 15 7.3 Test procedure ............................................................................................................................... 16 7.4 Test Result ..................................................................................................................................... 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ............................................... 24 8.1 Block Diagram Of Test Setup ......................................................................................................... 24 8.2 Limit ................................................................................................................................................ 24 8.3 Test procedure ............................................................................................................................... 24 8. 4 Test Result ..................................................................................................................................... 25 9. COUDUCTED OUTPUT POWER ................................................................................................. 29 9.1 Block Diagram Of Test Setup ..............…

Text truncated - open the document above for the full version.

Report Tel: 4008-707-283Web: http://www.ctb-lab.net Page 1 of 63 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Argon ONE UP CM5 Laptop FCC ID: 2BNPB-AR401P-25 Trademark(s): ARGON FORTY Model/Type reference: A25-001-ONE-UP-14 Applicant’s name: ARGON 40 TECHNOLOGIES LIMITED Address: RM C 20/F LUCKY PLAZA 315-321 LOCKHART RD WAN CHAI HONG KONG Manufacturer: ARGON 40 TECHNOLOGIES LIMITED Address: RM C 20/F LUCKY PLAZA 315-321 LOCKHART RD WAN CHAI HONG KONG Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Nov. 12, 2025 Sample tested Date: Nov. 12, 2025 to Dec. 03, 2025 Issue Date: Dec. 03, 2025 Report No.: CTB25111208803RF03 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is WIFI-2.4GHz band radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25111208803RF03 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 63 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................ 3 2. TEST SUMMARY ........................................................................................................................... 4 3. MEASUREMENT UNCERTAINTY ................................................................................................. 5 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................ 6 4.1 Product Information .......................................................................................................................... 6 4.2 Test Setup Configuration .................................................................................................................. 6 4.3 Support Equipment........................................................................................................................... 6 4.4 Channel List ..................................................................................................................................... 7 4.5 Test Mode ........................................................................................................................................ 7 4.6 Test Environment ............................................................................................................................. 7 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................................................... 8 5.1 Test Facility ...................................................................................................................................... 8 5.2 Test Instrument Used ....................................................................................................................... 8 6. AC POWER LINE CONDUCTED EMISSION ................................................................................ 11 6.1 Block Diagram Of Test Setup ......................................................................................................... 11 6.2 Limit ................................................................................................................................................ 11 6.3 Test procedure ............................................................................................................................... 11 6.4 Test Result ..................................................................................................................................... 13 7. RADIATED SPURIOUS EMISSION ............................................................................................. 15 7.1 Block Diagram Of Test Setup ......................................................................................................... 15 7.2 Limit ................................................................................................................................................ 15 7.3 Test procedure ............................................................................................................................... 16 7.4 Test Result ..................................................................................................................................... 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ............................................... 39 8.1 Block Diagram Of Test Setup ......................................................................................................... 39 8.2 Limit ................................................................................................................................................ 39 8.3 Test procedure ............................................................................................................................... 39 9. CONDUCT ED OUTPUT POWER ................................................................................................. 48 9.1 Block Diagram Of Test Setup ......................................................................................................... 48 9.2 Limit ............................................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: A25-001-ONE-UP-14 Radiated Emission Below 1G Above 1G Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 Conducted emissions