2BNYR-FFFindeeFrendz

 00⊠┡昱倍叇Ⓟ⎌┡梷Ⓟ⎌ⵎ14日 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas

SNAPWIRELESS PTY LTD OFFICE 9, 108-120 MARION ROAD BROOKLYN PARK SA, 5032 Australia Date: 04-23-2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BNYR-FF FRN: 0036731081 US Agent – Attestation Statement / Part 2.911(d)(7) SNAPWIRELESS PTY LTD certifies, that as of 04-23-2026 we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BNYR-FF. SNAPWIRELESS PTY LTD, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of SNAPWIRELESS PTY LTD for FCC ID: 2BNYR-FF. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: SNAPWIRELESS PTY LTD Designated Agent: FCC US Agent, LLC Company Representative: MARK JOHNSTON Designated Agent Representative: Tim Payne Signature: Signature:

SNAPWIRELESS PTY LTD Apr.23, 2026 Eurof ins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for 2BNYR‐FF SNAPWIREL ESS PTY LTD (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber‐security or anti‐virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “c overed list”. Sincerely, MARK JOHNSTON SNAPWIRELESS PTY LTD Apr.23, 2026 Eurof ins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for 2BNYR‐FF SNAPWIREL ESS PTY LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) MARK JOHNSTON

SNAPWIRELESS PTY LTD Date: Apr.23, 2026 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BNYR-FF Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Long-term confidentiality: Schematics Block Diagram Operational Description Schematics.pdf Block Diagram.pdf Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, SNAPWIRELESS PTY LTD Signature MARK JOHNSTON / Manager Typed name and Title

SNAPWIRELESS PTY LTD FCC ID: 2BNYR-FF POWER OF ATTORNEY Date: Apr.23, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group Co., Ltd. (Deval Qin) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group Co., Ltd. (Deval Qin) on our behalf shall have the same effect as acts of our own. This authorization expires on Apr.22, 2027. Sincerely, SNAPWIRELESS PTY LTD Signature MARK JOHNSTON / Manager Typed name and Title

SNAPWIRELESS PTY LTD FCC ID: 2BNYR-FF Date: 5/19/2026 Subject: authorization for adding family models To whom it May concern, Statement We would like to confirm the product FindeeFrendz with models FF-BB, FF-DOG, FF-FLW, FF-SCB, FF-FOX, FF-RNB, FF-STW, FF-UNI, FF-KOA, FF-KIT, FF-SKBD, FF-BUR, FF- CSM, FF-SML, FF-ROC, FF-DNS are same in all res pects. Only the model names and appearance are different. Yours sincerely, [signature] MARK JOHNSTON Manager SNAPWIRELESS PTY LTD

Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 3 of 14 2. Photographs –Constructional Details 2.1. EUT – External View FF-BB Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 4 of 14 FF-BUG Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 5 of 14 FF-CSM FF-DNS Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 6 of 14 FF-DOG FF-FLW Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 7 of 14 FF-FOX FF-KIT

Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 8 of 14 FF-KOA FF-RNB Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 9 of 14 FF-ROC FF-SCB Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 10 of 14 FF-SKBD FF-SML Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 11 of 14 FF-STW FF-UNI

Date: Product: Person: PRINT FILE File Name: KCKids findmy Tracker 31/03/2026 Model: FF-BB 80mAh 3.7V 0.66Wh Input:5V/0.5A FCC ID: 2BNYR-FFSN:Designed in Australia, Made in China Model: FF-BB 80mAh 3.7V 0.66Wh Input:5V/0.5A FCC ID: 2BNYR-FFSN:Designed in Australia, Made in China

Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 12 of 14 2.2. EUT – Internal View Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 13 of 14 WPT receiver Antenna Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 14 of 14 ======End====== BLE Antenna

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 8 TEST REPORT Referen ce No. .................... : WTD26D04094616W003 FCC ID ................................ : 2BNYR-FF Applicant ............................ : SNAPWIRELESS PTY LTD Address .............................. : OFFICE 9, 108-120 MARION ROAD, BROOKLYN PARK SA, Australia 5032 Manufacturer ..................... : SNAPWIRELESS PTY LTD Address .............................. : OFFICE 9, 108-120 MARION ROAD, BROOKLYN PARK SA, Australia 5032 Product ............................... : FindeeFrendz Model(s). ............................ : FF-BB, FF-DOG, FF-FLW, FF-SCB, FF-FOX, FF-RNB, FF-STW, FF-UNI , FF-KOA, FF-KIT, FF-SKBD, FF-BUR, FF-CSM, FF-SML, Brand. ................................. : Standards........................... : 47CFR FCC Part 2 Subpart J Section 2.1093 Date of Receipt Sample .... : 2026-04-10 Date of Test ....................... : 2026-04-27 to 2026-05-12 Date of Issue ...................... : 2026-05-27 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTD26D04094616W003 Page 2 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2. Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2. CONTENTS ............................................................................................................................................... 2 3. REVISION HISTORY ................................................................................................................................. 3 4. GENERAL INFORMATION ....................................................................................................................... 4 4.1. GENERAL DESCRIPTION OF E.U.T.................................................................................................... 4 4.2. DETAILS OF E.U.T. ......................................................................................................................... 4 4.3. TEST FACILITY ................................................................................................................................ 5 4.4. SUBCONTRACTED ........................................................................................................................... 5 4.5. ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................ 5 5. TEST SUMMARY ...................................................................................................................................... 6 6. RF EXPOSURE ......................................................................................................................................... 7 6.1. PROCEDURES AND REQUIREMENTS ................................................................................................. 7 6.2. CALCULATION METHOD ................................................................................................................... 7 6.3. TEST RESULT ................................................................................................................................. 8 Reference No.: WTD26D04094616W003 Page 3 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 3. Revision History Test Report No. Date of Receipt Sample Date of Test Date of Issue Purpose CommentApproved WTD26D04094616W003 2026-04-10 2026-04-27 to 2026-05-12 2026-05-27Original - Valid Reference No.: WTD26D04094616W003 Page 4 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4. General Information 4.1. General Description of E.U.T. Product: FindeeFrendz Model(s): FF-BB, FF-DOG, FF-FLW, FF-SCB, FF-FOX, FF-RNB, FF-STW, FF- UNI, FF-KOA, FF-KIT, FF-SKBD, FF-BUR, FF-CSM, FF-SML, FF-ROC, FF-DNS Model Description: Only the model name and appearance are different. Model FF-BB was tested in the report. Test Sample No.: 1-1/1 Bluetooth Version: 5.4 Hardware Version: MFA01-V4 Software Version: 1.7.0 4.2. Details of E.U.T. Operation Frequency: 2402~2480MHz Max. RF output power: 4.75dBm Modulation Technology: GFSK Antenna installation: Chip antenna Antenna Gain: 1.24dBi Note: #: The antenna gain is provided by the applicant, and the applicant should be responsible for its authenticity, WALTEK lab has not verified the authenticity of its information. Ratings: DC 3.7V, 80mAh by battery Wireless charging receiving power: 2.5Wmax Reference No.: WTD26D04094616W003 Page 5 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4.3. Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0013. Test Firm Registration No.: 7760A. Waltek Testing Group Co., Ltd. Has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration number 7760A, October 15, 2016. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. Waltek Testing Group Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration number 523476, September 10, 2019. 4.4. Subcontracted Whether parts of tests for the product have been subcontracted to other labs: Yes No If Yes, list the related tes…

Text truncated - open the document above for the full version.

2.4GHz 3216 Chip Antenna: RANT3216F245C03 _ Application: WLAN, 802.11b/g, Bluetooth, WLAN, etc... Features SMD, high reliability, ultra Impact, Omni-directional... Part number Information RANT3216F245C03 (A)(B)(C)(D)(E)(F) Electrical Specification The specification is defined on EVB. Dimension and Terminal Configuration No.Terminal Name 1Feeding/GNG 2GND/Feeding (A)Product TypeChip Antenna (B) Size Code 3.2x1.6mm( ± 0.2mm) (C) MaterialHigh K material (D) Frequency2.4 ~ 2.5GHz (E) Feeding modePIFA & Single Feeding (F) Antenna typeType=03 Working Frequency Range2400 ~2500 MHz Bandwidth120 MHz (Min.) Peak Gain1.24 dBi (Typ.) Impedance50 Ohm Return loss10 dB ( Min) PolarizationLinear Azimuth BeamwidthOmni-directional Operation Temperature(°C)-40 ~85°C Resistance to Soldering Heats 10sec. ( @ 280°C) TerminationNi / Au (Leadless) Dimension (mm) L 3.20±0.20 W 1.60±0.20 T 0.45±0.20 咏成國際科技有限公司電話: RAIN International Technology Co., Ltd.TEL: 2.4GHz 3216 Chip Antenna: RANT3216F245C03 _ 1 Evaluation BoardReference 长条板 PCB 推荐 Dimension 圆板 Antenna Layout Reference Unit :mm Electrical Characteristics Return Loss & Radiation Return Loss Frequency(MHz) S11 (dB) 2400-10.50 2450-30.62 2500-11.47 2.4GHz 3216 Chip Antenna: RANT3216F245C03 _ Radiation 2400MHz2450MHz2500MHz Efficiency82.52%85.26%83.01% Peak Gain1.15 dBi1.24 dBi1.19 dBi Directivity1.89 dBi1.97 dBi1.91 dBi X Y Z 2400MHz 2450MHz 2500MHz 2.4GHz 3216 Chip Antenna: RANT3216F245C03 _ Taping Specifications Reel and Taping Specification Reel Specification TYPESIZEABCD 32167”5K/Reel 9.0±0.5 60±213.5±0.5178±2 Tapping Specification PackagingTypeABWEFGHTψDP Paper Type3216 1.90±0.2 0 3.50±0.2 0 8.0±0.2 0 1.75±0.1 0 3.5±0.054.0±0.102.0±0.050.75±0.1 0 1.50±0.1 0 4.0±0.1 2.4GHz 3216 Chip Antenna: RANT3216F245C03 _ Reliability Table Test ItemProcedure Requirements Ceramic Type Remark (Reference) Electrical Characterization Fulfill the electrical specification User Spec. Thermal Shock 1. Preconditioning: 50 ± 10°C/ 1 hr , then keep for 24 ± 1 hrs at room temp. 2. Initial measure: Spec: refer Initialspec. 3. Rapid change of temperature test: -30°Cto +85°C; 100 cycles; 15 minutes at Lower category temperature; 15 minutes at Upper category temperature. No Visible Damage. Fulfill the electrical specification. MIL-STD-202 107 Temperature Cycling 1. Initial measure: Spec: refer Initialspec. 2. 100 Cycles (-30°Cto +85°C), Soak Mode=1 (2 Cycle/hours). 3. Measurement at 24 ± 2Hours after testcondition. No Visible Damage. Fulfill the electrical specification. JESD22 JA104 High Temperature Exposure 1. Initial measure: Spec: refer Initialspec. 2. Unpowered; 500hours @ T=+85°C. 3. Measurement at 24 ± 2 hours aftertest. No Visible Damage. Fulfill the electrical specification. MIL-STD-202 108 Low Temperature Storage 1. Initial measure: Spec: refer Initialspec. 2. Unpowered: 500hours @ T=-30°C. 3. Measurement at 24 ± 2 hours aftertest. No Visible Damage. Fulfill the electrical specification. MIL-STD-202 108 Solderability (SMD Bottom Side) Dipping method: a. Temperature: 235 ±5°C b. Dipping time: 3 ±0.5s The solder should cover over 95% of the critical area of bottom side. IEC 60384-21/22 4.10 Soldering Heat Resistance (RSH) Preheating temperature: 150 ± 10°C. Preheating time: 1~2 min. Solder temperature: 260 ± 5°C. Dipping time: 5 ± 0.5s No Visible Damage.IEC 60384-21/22 4.10 Vibration5g's for 20 min., 12 cycles each of 3 orientations Note: Use 8"X5" PCB .031" thick 7 secure points on, one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10-2000 Hz. No Visible Damage.MIL-STD-202 Method 204 Mechanical Shock Three shocks in each direction shall be applied along the three mutually perpendicular axes of the test specimen (18 shocks) Peak value: 1,500g’s Duration: 0.5ms Velocity change: 15.4 ft/s Waveform: Half-sine No Visible Damage.MIL-STD-202 Method 213 Humidity Bias 1. Humidity: 85% R.H., Temperature:85 ± 2 °C. 2. Time: 500 ± 24hours. 3. Measurement at 24 ± 2hrs after testcondition. No Visible Damage. Fulfill the electrical specification. MIL-STD-202 Method 106 2.4GHz 3216 Chip Antenna: RANT3216F245C01 _ Board Flex (SMD) 1. Mounting method: IR-Reflow. PCB Size (L:100 × W:40 × T:1.6mm) 2. Apply the load in direction of the arrow until bending reaches 2 mm. No Visible Damage.AEC-Q200 005 AdhesionForce of 1.8Kg for 60 seconds.No Visible Damage Magnification of 20X or greater may be employed for inspection of the mechanical integrity of the device body terminals and body/terminal junction. AEC-Q200 006 Physical Dimension Any applicable method using x10 magnification, micrometers, calipers, gauges, contour projectors, or other measuring equipment, capable of determining the actual specimen dimensions. In accordance with specification. JESD22 JB100 Revision History RevisionDateContent 12019/03/01New Datasheet 22020/02/22Add 2D radiation characteristic

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 38 TEST REPORT Reference No. .................... : WTD26D04094616W002 FCC ID ................................ : 2BNYR-FF Applicant ............................ : SNAPWIRELESS PTY LTD Address .............................. : OFFICE 9, 108-120 MARION ROAD, BROOKLYN PARK SA, Australia 5032 Manufacturer .................... : SNAPWIRELESS PTY LTD Address .............................. : OFFICE 9, 108-120 MARION ROAD, BROOKLYN PARK SA, Australia 5032 Product ............................... : FindeeFrendz Model(s). ............................ : FF-BB, FF-DOG, FF-FLW, FF-SCB, FF-FOX, FF-RNB, FF-STW, FF-UNI, FF-KOA, FF-KIT, FF-SKBD, FF-BUR, FF-CSM, FF-SML, FF-ROC, FF-DNS Brand. ................................. : Standards........................... : FCC 47CFR Part 15.247 Date of Receipt sample .... : 2026-04-10 Date of Test ....................... : 2026-04-27 to 2026-05-12 Date of Issue ...................... : 2026-05-27 Test Result ......................... : Pass Remarks: The result s shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Design ated Reviewer Reference No.: WTD26D04094616W002 Page 2 of 38 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 3 4 GENERAL INFORMATION ....................................................................................................................... 4 4.1 General Description of E.U.T. ....................................................................................................... 4 4.2 Details of E.U.T. ............................................................................................................................ 4 4.3 Channel List .................................................................................................................................. 4 4.4 Test Facility ................................................................................................................................... 5 4.5 Subcontracted ............................................................................................................................... 5 4.6 Abnormalities from Standard Conditions ...................................................................................... 5 4.7 Test Mode ..................................................................................................................................... 5 5 TEST SUMMARY ...................................................................................................................................... 6 6 EQUIPMENT USED DURING TEST ......................................................................................................... 7 6.1 Equipments List ............................................................................................................................ 7 6.2 Description of Support Units ......................................................................................................... 8 6.3 Measurement Uncertainty ............................................................................................................ 8 6.4 Test Equipment Calibration .......................................................................................................... 8 7 DUTY CYCLE ............................................................................................................................................ 9 8 RADIATED EMISSIONS ......................................................................................................................... 10 8.1 EUT Operation ............................................................................................................................ 10 8.2 Test Setup .................................................................................................................................. 11 8.3 Spectrum Analyzer Setup ........................................................................................................... 12 8.4 Test Procedure ........................................................................................................................... 13 8.5 Corrected Amplitude & Margin Calculation ................................................................................ 13 8.6 Summary of Test Results ........................................................................................................... 14 9 CONDUCTED SPURIOUS EMISSIONS ................................................................................................. 20 9.1 Test Procedure ........................................................................................................................... 20 9.2 Test Result .................................................................................................................................. 21 10 BAND EDGE MEASUREMENT .............................................................................................................. 27 10.1 Test Produce ..............................................…

Text truncated - open the document above for the full version.

Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 1 of 14 1. Test Setup photos 1.1 Photograph – Radiated Emissions For 9kHz-30MHz Test Site 2# For 30MHz-1000MHz Test Site 2# Appendix-FF-BB-Photos Model FF-BB FCC ID: 2BNYR-FF Page 2 of 14 For above 1GHz Test Site 1#