Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applic ant Legal Business NameLG Electronics Inc. Addres s FRN Grantee Code FCC ID: Auth or ized Contact Name Contact Phone Contact Email I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2026-06-23 Print Name: Titl e: *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, South Korea, 17709 0036977056 2BO3L2BO3LCCRCSLIMH Ykoedgno nowK kudgnoy. nowk @ egl . moc28 - 13 - 6608 - 8355 Yongdeok Kwon Chief Research Engineer, EMC Standard Team
FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name LG Electronics Inc. Address FRN Grantee Code FCC ID: Authorized Contact NameYongdeok Kwon Contact Phone Contact Email LG Electronics Inc. (“the appl icant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is not inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Print Name: Title: *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Date: 202 6 -06-23 2BO3L 2BO3LCCRCSLIMH 0036977056 [email protected] 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, South Korea, 17709 ongdeokYKwon Chief Research Engineer, EMC Standard Team
UNITED STATES DESIGNATED AGENT LETTER Date: 2026-06-23 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: LG Electronics Inc. U.S. designated agent Company Name: LG Electronics USA, Inc. Grantee Code:2BO3L FRN: Contact Name: Contact Name: Address: 222 LG-ro, Jinwi-myeon Address: 0023476120 111 Sylvan Ave, North Building, Englewood Cliffs City/Province/Zip:Pyeongtaek-si, Gyeonggi-do, City/Province/Zip: Englewood Cliffs/New Telephone:Telephone:201-470-2696 Fax: Fax: Email: Email: 201-816-2003 [email protected] ApplicantU.S .designatedagent Name: Name:HeejaeCho Title:Teamleader, Signature: Title:Chief Research Engineer, EMC Standard Team Signature: Yongdeok Kwon YongdeokKwon Heejae Cho LGEUS Regulatory andEnvironment Applicable Equipment: FCC ID: 2BO3LCCRCSLIMH ATTN: Director of Certification: We, LG Ele c tron ics Inc. and L G Ele ctro nics U S A , Inc. un de rs tan d and a ckn o wl ed g e the ap plica nts consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the desi gna ted agent lis ted a bov e. We, LG E lec tronics In c. an d LG El ectr onic s USA, Inc . a c kn o wledg e the a ppli can t’s a ccep t an ce of i t s obli gation to m ain tain an agent for service of process in th e United States for no less than on e year after either th e gra ntee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving t he equipment, whichever is later SouthKorea 17709 y dgno uk.kw no @ egl . moc 82-31-8066-5538 -
a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; JUN 23, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 LETTER FOR AUTHORIZATION FCC ID: 2BO3LCCRCSLIMH To whom it may concern: I, the undersigned, hereby authorize SGS Korea Co., Ltd. and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these ma tters. Any and all acts carried out by SGS Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we a re not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to: LG Electronics Inc. Gyeonggi-do, South Korea 17709222 LG-ro, Jinwi-myeon , Pyeongtaek-si i) keep a record of all complaints made know n to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Yongdeok Kwon Chief Research Engineer, EMC Standard Team LG Electronics Inc
JUN 23, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 REQUEST FOR CONFIDENTIALITY FCC ID: 2BO3LCCRCSLIMH Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4 ) of the Freedom of Information Act, LG Electronics USA hereby requests co nfidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as o utlined in Public Notice DA 04-1705. This provision will give LG Electronics USA temporary confidentiality of commercially sensitive information p rior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours LGElectronicsInc. Yongdeok Kwon ChiefResearchEngineer,EMCStandardTeam Confidential List Short-Term Test setup photo External Photos Internal Photos User manual Long-TermSchematics Operational Descriptions Block Diagram
PRODUCT: REAR SEAT ENTERTAINMENT MODEL: CCRCSLIMH Label Format and Location FCC ID: 2BO3LCCRCSLIMH IC ID: 2703H-CCRCSLIMH Label <Topview of EUT> Due to limited space on the product label, the statements required by Section 15.19 for FCC are provided in the user manual only.
SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007062 Page: 2 of 9 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) INDEX Table of Contents 1. General Information -------------------------------------------------------------------------------------- 3 2. RF Exposure ----------------------------------------------------------------------------------------------- 6 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007062 Page: 3 of 9 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - CAB Identifier: KR0150 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Phone No. : +82 31 688 0901 Fax No. : +82 31 688 0921 1.2. Details of Applicant Applicant : LG Electronics Inc. Address : 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, South Korea, 17709 Contact Person : Kwon, Yong deok Phone No. : +82 31 8066 5538 1.3. Details of Manufacturer Company : LG Electronics Inc. Address : 128, Yeoui-daero, Yeongdeungpo-gu, Seoul, Republic of Korea, 07336 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007062 Page: 4 of 9 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 1.4. Description of EUT Kind of Product Rear Seat Entertainment Model Name CCRCSLIMM Serial Number Conducted: 605KVCL104147 Radiated: 605KVYK104146 Power Supply DC 12 V Frequency Range 2 402 ㎒ ~ 2 480 ㎒ (Bluetooth Low Energy) 2 412 ㎒ ~ 2 462 ㎒ (11b/g/n_HT20) 5 180 ㎒ ~ 5 240 ㎒ (U-NII 1: 11a/n_HT20, 11ac_VHT20) 5 190 ㎒ ~ 5 230 ㎒ (U-NII 1: 11n_HT40, 11ac_VHT40) 5 210 ㎒ (U-NII 1: 11ac_VHT80) 5 745 ㎒ ~ 5 825 ㎒ (U-NII 3: 11a/n_HT20, 11ac_VHT20) 5 755 ㎒ ~ 5 795 ㎒ (U-NII 3: 11n_HT40, 11ac_VHT40) 5 775 ㎒ (U-NII 3: 11ac_VHT80) Modulation Technique DSSS, OFDM, GFSK Number of Channels 40 channels (Bluetooth Low Energy) 11 channels (11b/g/n_HT20) 4 channels (U-NII 1: 11a/n_HT20, 11ac_VHT20) 2 channels (U-NII 1: 11n_HT40, 11ac_VHT40) 1 channel (U-NII 1: 11ac_VHT80) 5 channels (U-NII 3: 11a/n_HT20, 11ac_VHT20) 2 channels (U-NII 3: 11n_HT40, 11ac_VHT40) 1 channel (U-NII 3: 11ac_VHT80) Antenna Type Ant.1: Chip Antenna Ant.2: Chip Antenna Antenna Gain ※ Ant. 1 & Ant. 2 BLE: 2 402 ㎒ ~ 2 480 ㎒: 3.61 ㏈i WLAN2: 2 412 ㎒ ~ 2 462 ㎒: 3.61 ㏈i WLAN5: 5 180 ㎒ ~ 5 240 ㎒: 3.10 ㏈i 5 745 ㎒ ~ 5 825 ㎒: 3.10 ㏈i H/W Version V1.0 S/W Version V1.0 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007062 Page: 5 of 9 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 1.5. Declarations by the manufacturer - The EUT does not support transmit power control (TPC). - The EUT only supports UNII-1 Band and UNII-3 Band. - WLAN 5G transmits both SISO and MIMO mode. 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 1 Section Test Item(s) Result 1.1307(b)(3) RF Exposure Evaluation Pass 1.7. Test Report Revision Revision Report Number Date of Issue Description 0 F690501-RF-RTL007062 2026.06.10 Initial 1.8. Device Capabilities Mode SISO MIMO Ant. 1 Ant. 2 Ant. 1 + Ant. 2 Bluetooth Low Energy O X X WLAN 2 ㎓ X O X WLAN 5 ㎓ O O O SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007062 Page: 6 of 9 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 2. RF Exposure Evaluation Test exemptions apply for devices used in general population/uncontrolled exposure environments, according to the SAR-based, or MPE-based exemption thresholds. 2.1. Blanket 1 ㎽ Blanket Exemption The 1 ㎽ Blanket Exemption of § 1.1307(b)(3)(i)(A) applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power of no more than 1 ㎽, regardless of separation distance. The 1 ㎽ blanket exemption applies at separation distances less than 0.5 ㎝, including where there is no separation. This exemption shall not be used in conjunction with other exemption criteria other than those for multiple RF sources in paragraph § 1.1307(b)(3)(ii)(A). The 1 ㎽ exemption is independent of service type and covers the full range of 100 ㎑ to 100 ㎓, but it shall not be used in conjunction with other exemption criteria or in devices with higher-power transmitters operating in the same time-averaging period. Exposure from such higher-power transmitters would invalidate the underlying assumption that exposure from the lower-power transmitter is the only contributor to SAR in the relevant volume of tissue. SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007062 Page: 7 of 9 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 2.2. MPE-based Exemption General frequency and separation-distance dependent MPE-based effective radiated power (ERP) thresholds are in Table B.1 [Table 1 of § 1.1307(b)(1)(i)(C)] to support an exemption from further evaluation from 300 ㎑ through 100 ㎓. Table 1: THRESHOLDS FOR SINGLE RF SOURCES SUBJECT TO ROUTINE ENVIRONMENTAL EVALUATION RF Source Frequency Minimum Distance Threshold ERP f L (㎒) f H (㎒) λ L / 2π λ H / 2π W 0.3 - 1.34 159 m - 35.6 m 1 920 R2 1.34 - 30 35.6 m - 1.6 m 3 450 R 2 /f 2 30 - 300 1.6 m - 159 mm 3.83 R 2 300 - 1 500 159 mm - 31.8 mm 0.012 8 R 2 f 1 500 - 100 000 31.8 mm - 0.5 mm…
Text truncated - open the document above for the full version.
SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 2 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) INDEX Table of Contents 1. General Information -------------------------------------------------------------------------------------- 3 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emissions --------- 11 3. 6 ㏈ Bandwidth and 99 % Bandwidth --------------------------------------------------------------- 41 4. Maximum Peak Conducted Output Power --------------------------------------------------------- 50 5. Power Spectral Density --------------------------------------------------------------------------------- 56 6. Antenna Requirement ----------------------------------------------------------------------------------- 61 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 3 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - Designation number: KR0150 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Phone No. : +82 31 688 0901 Fax No. : +82 31 688 0921 1.2. Details of Applicant FCC Applicant : LG Electronics Inc. FCC Address : 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, South Korea, 17709 IC Applicant : LG ELECTRONICS INC. IC Address : 222, LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, Korea (Republic of), 451-713 Contact Person : Kwon, Yong deok Phone No. : +82 31 8066 5538 1.3. Details of Manufacturer Company : LG Electronics Inc. Address : 128, Yeoui-daero, Yeongdeungpo-gu, Seoul, Republic of Korea, 07336 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 4 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.4. Description of EUT Kind of Product Rear Seat Entertainment Model Name CCRCSLIMH Serial Number Conducted: 511KVWP143537 Radiated: 511KVVR143591 Power Supply DC 12 V Frequency Range 2 412 ㎒ ~ 2 462 ㎒ (11b/11g/11n_HT20) Modulation Technique DSSS, OFDM Number of Channels 11 channels (11b/11g/11n_HT20) Antenna Type Ant.1: Chip Antenna Ant.2: Chip Antenna Antenna Gain ※ Ant. 1 & Ant. 2 BLE: 2 402 ㎒ ~ 2 480 ㎒: 3.61 ㏈i WLAN2: 2 412 ㎒ ~ 2 462 ㎒: 3.61 ㏈i WLAN5: 5 180 ㎒ ~ 5 240 ㎒: 3.10 ㏈i 5 745 ㎒ ~ 5 825 ㎒: 3.10 ㏈i H/W Version V1.0 S/W Version V1.0 FVIN N/A SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 5 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.5. Test Equipment List Equipment Manufacturer Model S/N Cal. Date Cal. Interval Cal. Due Signal Generator R&S SMA100B 106887 10/20/2025 Annual 10/20/2026 Spectrum Analyzer R&S FSV30 103210 03/17/2026 Annual 03/17/2027 Spectrum Analyzer Agilent N9020A MY53421758 09/10/2025 Annual 09/10/2026 Attenuator AEROFLEX/ INMET 40AH2W-10 40G-2 12/17/2025 Annual 12/17/2026 High Pass Filter Wainwright Instrument GmbH WHKX3.0/18G-10SS 4 06/09/2025 Annual 06/09/2026 High Pass Filter Wainwright Instrument GmbH WHNX7.5/26.5G-6SS 11 10/22/2025 Annual 10/22/2026 Low Pass Filter Mini-Circuits NLP-1200+ V8979400903-2 02/02/2026 Annual 02/02/2027 Power Sensor R&S NRP-Z81 102906 01/02/2026 Annual 01/02/2027 DC Power Supply Agilent U8002A MY54110041 09/18/2025 Annual 09/18/2026 Preamplifier H.P. 8447F 2944A03909 03/31/2026 Annual 03/31/2027 Signal Conditioning Unit R&S SCU-18F 100959 01/05/2026 Annual 01/05/2027 Preamplifier TESTEK TK-PA1840H 130016 03/06/2026 Annual 03/06/2027 Loop Antenna Schwarzbeck Mess-Elektronik FMZB 1519 1519-039 10/01/2025 Biennial 10/01/2027 Bilog Antenna Schwarzbeck Mess-Elektronik VULB 9163 01126 03/09/2026 Biennial 03/09/2028 Horn Antenna R&S HF906 100326 03/03/2026 Annual 03/03/2027 Horn Antenna Schwarzbeck Mess-Elektronik BBHA 9170 9170-540 12/05/2025 Annual 12/05/2026 EMI Test Receiver R&S ESU26 100109 01/21/2026 Annual 01/21/2027 Turn Table Innco systems GmbH DS 1200 S N/A N.C.R. N/A N.C.R. Controller Innco systems GmbH CONTROLLER CO3000-4P CO3000/963/3833 0516/L N.C.R. N/A N.C.R. Antenna Mast Innco systems GmbH MA4640-XP-ET MA4640/536/3833 0516/L N.C.R. N/A N.C.R. Anechoic Chamber SY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N/A N.C.R. N/A N.C.R. Coaxial Cable SENSORVIEW NMST-13A26-NMST- 5 m TPC2402190004 04/17/2026 Semi- Annual 10/17/2026 Coaxial Cable SENSORVIEW NMST-13A26-NMST- 10 m TPC2402190001 04/17/2026 Semi- Annual 10/17/2026 Coaxial Cable Qualwave QT50P-40-KK-1.5 24270074 04/10/2026 Semi- Annual 10/10/2026 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 6 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15 Subpart C, ISED RSS-247 Issue 4 and RSS-Gen Issue 5 Section in FCC Section in IC Test Item(s) Result 15.205(a) 15.209 15.247(d) RSS-247 Issue 4 6.6 RSS-Gen Issue 5 8.9 Transmitter Radiated Spurious Emissions and Conducted Spurious Emission Pass 15.247(a)(2) RSS-247 Issue 4 6.3.1(a) RSS-Gen Issue 5 6.7 6 ㏈ Bandwidth & 99 % Bandwidth Pass 15.247(b)(3) RSS-247 Issue 4 6.3.2 Maximum Peak Conducted Output Power Pass 15.247(e) RSS-247 Issue 4 6.3.1(b) Power Spectral Density Pass 15.207 RSS-Gen Issue 5 8.8 AC Power Line Conducted Emission N/A 1) Note; 1)…
Text truncated - open the document above for the full version.
SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 53 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) Test plots 11b Low Channel Middle Channel High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 54 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 11g Low Channel Middle Channel High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 55 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 11n_HT20 Low Channel Middle Channel High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 56 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 5. Power Spectral Density 5.1. Test Setup EUT Attenuator Spectrum Analyzer 5.2. Limit 5.2.1 FCC According to §15.247(e), for digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 ㏈m in any 3 ㎑ band during any time interval of continuous transmission. This power spectral density shall be determined in accordance with the provisions of paragraph (b) of this section. The same method of determining the conducted output power shall be used to determine the power spectral density. 5.2.2 IC According to RSS-247 Issue 4, 6.3.1(b), the transmitter power spectral density conducted from the transmitter to the antenna(s) shall not be greater than 8㏈m/3 ㎑ band during any time interval of continuous transmission. This power spectral density shall be determined in accordance with the provisions of section 6.3.2 The power spectral density shall be determined using the same method as is used to determine the maximum conducted output power. 5.3. Test Procedure The measurements are recorded using the PKPSD measurement procedure in section 11.10.2 of ANSI C63.10-2020 (for FCC) and ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 (for ISED). - The following procedure shall be used if maximum peak conducted output power was used to determine compliance, and is optional if the maximum conducted (average) output power was used to determine compliance. 1. Set analyzer center frequency to DTS channel center frequency. 2. Set the span > 1.5 times the DTS bandwidth. 3. Set the RBW to 3 ㎑ ≤ RBW ≤ 100 ㎑. 4. Set the VBW ≥ [3 x RBW]. 5. Detector = peak. 6. Sweep time = No faster than coupled (auto) time. 7. Trace mode = max hold. 8. Allow trace to fully stabilize. 9. Use the peak marker function to determine the maximum amplitude level within the RBW. 10. If measured value exceeds requirement, then reduce RBW (but no less than 3 ㎑) and repeat. Note; - For test plots, the reading values shown in plots were final results because all path loss of the cable and attenuator were investigated and compensated to spectrum analyzer as TDF function. SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 57 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 5.4. Test Results Ambient temperature : (23 ± 1) °C Relative humidity : 47 % Operation Mode Channel Frequency (㎒) Measured PSD (㏈m/3㎑) Limit (㏈m/3㎑) 11b Low 2 412 -9.55 8 Middle 2 437 -8.28 High 2 462 -9.29 11g Low 2 412 -10.70 Middle 2 437 -10.57 High 2 462 -10.74 11n_HT20 Low 2 412 -11.05 Middle 2 437 -11.37 High 2 462 -11.76 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 58 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) Test plots 11b Low Channel Middle Channel High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 59 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 11g Low Channel Middle Channel High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 60 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 11n_HT20 Low Channel Middle Channel High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL007060 Page: 61 of 61 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 6. Antenna Requirement 6.1. Standard Applicable For intentional device, according to FCC 47 CFR Section §15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. Further, this requirement does not apply to intentional radiators that must be professionally installed, such as perimeter protection systems and some field disturbance sensors, or to other intentional radiators which, in accordance with §15.31(d), must be measured at the installation site. However, the installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this part are n…
Text truncated - open the document above for the full version.
Model name: CCRCSLIMH Item Contents Antenna Type Chip Antenna Antenna peak gain BLE: 2 402 ㎒ ~ 2 480 ㎒ : 3.61 ㏈i WLAN2: 2 402 ㎒ ~ 2 480 ㎒ : 3.61 ㏈i WLAN5: 5 180 ㎒ ~ 5 240 ㎒ : 3.10 ㏈i 5 745 ㎒ ~ 5 825 ㎒ : 3.10 ㏈i Manufacturer / Model name AMOTECH Co., Ltd. / AMAN1003030ST02 Address of manufacturer 380, Namdongseo-ro, Namdong-gu, Incheon, Republic of Korea. Test Laboratory AMOTECH Co., Ltd…
Text truncated - open the document above for the full version.
111 Sylvan Ave, North Building · Englewood Cliffs, New Jersey · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.09 mW |
| 2 | 15C | 2.41 GHz - 2.46 GHz | 205.12 mW |