2BOCI-E1IP camera

Read this manual carefully and save it for future reference. E1 QUICK START GUIDE QUICK START GUIDE WHAT’S IN THE BOX Power Adapter Pack of Screws Mounting Bracket IP Camera PRODUCT DIAGRAM 1Lens 4 TF Card Slot 7 Speaker 5 Reset Button 2 Indicator Light 3 Microphone 6 Power Cable 1 2 3 4 5 6 7 SETUP Download the "Wansview Cloud" APP, then create an account and log in. Please plug the camera power cable to power it on. The indicator with red light on means the camera is powered on successfully. Then wait for 10 seconds until the indicator flashes red and blue alternately. Open the "Wansview Cloud" APP and tap "+" or "Add device" button, find the E1 camera in the list, then follow the in-app instructions. INDICATOR LIGHTS STATUS Light StatusCamera Status Red light on Blue light flashing Solid blue lightCamera working properly Flashing red &blue lightCamera ready for connection WiFi connection in progress Camera is powered on Flashing red lightReset/firmware upgrade in progress INSTALLATION Please remove the lens protection film before mounting the camera Attach perforated fixing patch.Fix the bracket with screws. Snap camera into bracket. FAQ Unable to connect the camera to Wi-Fi during setup? USCAAU [email protected] If you are unable to connect the camera to Wi-Fi, please try the following solutions: Make sure your Wi-Fi meets the network requirements of the camera Make sure you have entered the correct Wi-Fi password. Place your camera near the router to make sure that the Wi-Fi signal is strong enough. Check if the indicator flashes red and blue alternately. If the problem persists, please contact our customer service: If the light does not flash red and blue alternately, please try the following solutions: Make sure the camera is powered on. Press and hold the reset button for about 15 seconds to reset the camera. The light is not flashing red and blue alternately? UK [email protected] Camera is offline? Once you set up TF card or Cloud recording, please click "Replay" under live feed and view TF card&Cloud recording. Do not go to the "Alert", as it only shows 10s alert videos. How to view longer TF card/Cloud recording? The "Wansview Cloud" application is free to use. The cloud service is completely optional. Even if you don't want to subscribe, you can still use the camera normally. Do I have to subscribe to the cloud plan? Ensure the router is working properly. Reboot the router and camera by unplugging and replugging the power cable to see if the camera connects automatically after that. If not, reset the camera by holding the Reset button for 5-10s and reconnect the camera. Place the camera closer to the router to make sure the connection is strong enough. NOTICE This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). ISED Statements Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. FCC Statement AOQEE declares that the security camera is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit https://AOQEE.com Simplified EU Declaration of Conformity After-service : 1-323-686-3288 (6:00pm-3:00am PST) (US only) from Monday to Friday [email protected] UK [email protected] USCAAU This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Herland International Trading Inc FRN: 0036324101 Contact Name: Jianfeng Gao Address: 1370 Valley Vista Dr Ste 200 Diamond Bar California 91765-3921 Telephone No: 001-909-772-1888 Email: [email protected] Applicant: Company name: Dongguan Anran Smart Technology Co., Ltd. Product Description: IP camera Grantee code: 2BOCI FCC ID: 2BOCI-E1 FRN: 0036820470 Contact Name: wu jian Address: Building 6, No.10, Hongniu Road, Huangjiang Town, Dongguan City, Guangdong Province, China Telephone No: +86-13590205575 Email: [email protected] [Dongguan Anran Smart Technology Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [Herland International Trading Inc] is our designated US agent for service of process for the above referenced FCC ID. [Dongguan Anran Smart Technology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Herland International Trading Inc] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2025/11/19 Applicant’s Name: wu jian US Agent’s Name: Jianfeng Gao Title: Manager Title: Manager Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 Dongguan Anran Smart Technology Co., Ltd. TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Dongguan Anran Smart Technology Co., Ltd. Grantee code: 2BOCI FCC ID: 2BOCI-E1 FRN: 0036820470 Contact Name: wu jian Address: Building 6, No.10, Hongniu Road, Huangjiang Town, Dongguan City, Guangdong Province, China Telephone No: +86-13590205575 Fax No: +86-13590205575 Email: [email protected] i. [Dongguan Anran Smart Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Dongguan Anran Smart Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Dongguan Anran Smart Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2025/11/19 Applicant’s Name: wu jian Title: Manager Signature: 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Dongguan Anran Smart Technology Co., Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device IP camera Company name Dongguan Anran Smart Technology Co., Ltd. Grantee code 2BOCI FCC ID 2BOCI-E1 FRN 0036820470 Contact name wu jian Address Building 6, No.10, Hongniu Road, Huangjiang Town, Dongguan City, Guangdong Province, China Telephone number +86-13590205575 E-mail [email protected] Chipset/module information ATBM6132C Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 3 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: 4 # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies ignature: Name: wu jian Date:2025-11-19 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

Dongguan Anran Smart Technology Co., Ltd. Product Similarity Declaration Company: Dongguan Anran Smart Technology Co., Ltd. Address: Building 6, No.10, Hongniu Road, Huangjiang Town, Dongguan City, Guangdong Province, China Product Name: IP camera Model Number: E1, E2, E3, E6, E8, Y1, Y2, Y4, Y6, Y8 FCC Identifier: 2BOCI-E1 We (Dongguan Anran Smart Technology Co., Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), All models are same as the samples except model name, they have the same structure and circuit. Client’s signature Name: wu jian Date: 2025-11-19 Title: Manager Signature of applicant:

TCB CALL página 1 File FCC ID: 2BOCI-E1 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : Search | California Secretary of State TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 TCB CALL página 5 TCB CALL página 6 TCB CALL página 7 TCB CALL página 8 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

C5266091_X10_Ed.2 1/1 Dongguan Anran Smart Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2025.11.19 Subject: Request for Confidentiality FCC ID: 2BOCI-E1 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, C5266091_X10_Ed.2 1/1 Signature: Name: wu jian Title: Manager 2025.11.19

C5266091_X8_Ed.1 1/1 Letter of Authorization Dongguan Anran Smart Technology Co., Ltd. Company: Dongguan Anran Smart Technology Co., Ltd. Address: Building 6, No.10, Hongniu Road, Huangjiang Town, Dongguan City, Guangdong Province, China Product Name: IP camera Model Number: E1, E2, E3, E6, E8, Y1, Y2, Y4, Y6, Y8 FCC Identifier: 2BOCI-E1 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: wu jian Date: 2025.11.19 Title: Manager Signature of applicant:

Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(External Photos) Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※

Size:24*16mm M/N: E1 FCC ID: 2BOCI-E1 Label location

Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(Internal Photos) Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. WIFI ANT Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※

FCC ID: 2BOCI-E1 RF Exposure Evaluation Limits KDB 447498 D01 General RF Exposure Guidance v06 FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation wifi 2.4G mode Channel Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 9.61 9.1411 0.00286 1.0 PASS 802.11g 8.56 7.1779 0.00224 1.0 PASS 802.11n HT20 8.57 7.1945 0.00225 1.0 PASS 802.11n HT40 8.49 7.0632 0.00221 1.0 PASS Remark: antenna gain=1.96dBi

Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-251015004R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 48 FCC Part 15C Test Report FCC ID: 2BOCI-E1 Applicant: Dongguan Anran Smart Technology Co., Ltd. Address: Building 6, No.10, Hongniu Road, Huangjiang Town, Dongguan City, Guangdong Province, China Manufacturer: Dongguan Anran Smart Technology Co., Ltd. Address: Building 6, No.10, Hongniu Road, Huangjiang Town, Dongguan City, Guangdong Province, China Product Name: IP camera Trade Mark: N/A Model Number: E1, E2, E3, E6, E8, Y1, Y2, Y4, Y6, Y8 Date of Receipt: Oct. 15, 2025 Test Date: Oct. 15, 2025 - Oct. 23, 2025 Date of Report: Oct. 23, 2025 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10:2020 Test Result: Pass Report Number: DLE-251015004R Prepared (Test Engineer): Ken Tan Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-251015004R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 48 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 MEASUREMENT UNCERTAINTY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 DESCRIPTION OF TEST MODES 6 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 6 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 7 2.5 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 7 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 8 3 . EMC EMISSION TEST 9 3.1 CONDUCTED EMISSION MEASUREMENT 9 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 9 3.1.2 TEST PROCEDURE 9 3.1.3 DEVIATION FROM TEST STANDARD 9 3.1.4 TEST SETUP 10 3.1.5 EUT OPERATING CONDITIONS 10 3.1.6 TEST RESULTS 10 3.2 RADIATED EMISSION MEASUREMENT 13 3.2.1 RADIATED EMISSION LIMITS 13 3.2.2 TEST PROCEDURE 14 3.2.3 DEVIATION FROM TEST STANDARD 14 3.2.4 TEST SETUP 14 3.2.5 EUT OPERATING CONDITIONS 15 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 16 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 17 3.2.8 TEST RESULTS (1GHZ~25GHZ) 19 3.3 RADIATED BAND EMISSION MEASUREMENT 23 3.3.1 TEST REQUIREMENT: 23 3.3.2 TEST PROCEDURE 23 3.3.3 DEVIATION FROM TEST STANDARD 23 3.3.4 TEST SETUP 24 3.3.5 EUT OPERATING CONDITIONS 24 3.4 CONDUCTED BAND EDGE EMISSION&CONDUCTED SPURIOUS EMISSIONS MEASUREMENT 29 3.4.1 APPLICABLE STANDARD 29 3.4.2 TEST PROCEDURE 29 3.4.3 DEVIATION FROM STANDARD 29 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-251015004R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 48 Table of Contents Page 3.4.4 TEST SETUP 29 3.4.5 EUT OPERATION CONDITIONS 29 3.4.6 TEST RESULTS 29 4 . AVERAGE OUTPUT POWER 34 4.1 APPLIED PROCEDURES / LIMIT 34 4.1.1 TEST PROCEDURE 34 4.1.2 DEVIATION FROM STANDARD 34 4.1.3 TEST SETUP 34 4.1.4 EUT OPERATION CONDITIONS 34 4.1.5 TEST RESULTS 35 5 . POWER SPECTRAL DENSITY TEST 38 5.1 APPLIED PROCEDURES / LIMIT 38 5.1.1 TEST PROCEDURE 38 5.1.2 DEVIATION FROM STANDARD 38 5.1.3 TEST SETUP 38 5.1.4 EUT OPERATION CONDITIONS 38 5.1.5 TEST RESULTS 39 6 . 6DB BANDWIDTH TEST 42 6.1 APPLIED PROCEDURES / LIMIT 42 6.1.1 TEST PROCEDURE 42 6.1.2 DEVIATION FROM STANDARD 42 6.1.3 TEST SETUP 42 6.1.4 EUT OPERATION CONDITIONS 42 6.1.5 TEST RESULTS 43 7 . ANTENNA REQUIREMENT 48 7.1 STANDARD REQUIREMENT 48 7.2 EUT ANTENNA 48 8 . TEST SEUUP PHOTO 48 9 . EUT PHOTO 48 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-251015004R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 48 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.205, 15.209, 15.247(d) Radiated Spurious Emission PASS 15.209, 15.205 Band Edge Emission PASS 15.247(d) Conducted Spurious Emissions PASS 15.247(b) Average Output Power PASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Test lab: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China FCC Test Firm Registration Number: 854456 Designation Number: CN1307 IC Registered No.: 27485 CAB ID.: CN0118 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% 8 6dB Bandwidth ±0.2% 9 Power Spectral Density ±2.45dBm Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-251015004R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 48 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: IP camera Trade Mark: N/A Model Number: E1, E2, E3, E6, E8, Y1, Y2, Y4, Y6, Y8 Model Difference All models are same as the samples except model name, they have the same structure and circuit. Operation Frequency: 2412~2462 MHz for 802.11b/g/nHT20 2422~2452 MHz for 802.11nHT40 Channel numbers: 11 Channels for 802.11b/g/n(HT20) 7 channels for 802.11nHT40 Channel separation: 5MHz Modulation technology: 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n(20/40): OFDM(QPS…

Text truncated - open the document above for the full version.

Internal antenna Shen zhen UP3D Tech Co.,Ltd Shen zhen UP3D Tech Co.,Ltd Internal Antenna test report Office / Factory : Building 6, No.10, Hongniu Road, Huangjiang Town, Dongguan City, Guangdong Province, China Customer Approval Company Dongguan Anran Smart Technology Co., Ltd. Signature Date 2025-3-15 CONTENT 1. Product Description ........................................................ 2 2. General Description .................................................................. 2 3. Technical Information ............................................................. 2 4. Test Standards ............................................................... 3 5. Test Item ......................................................................... 3 6. Test Photo ....................................................................... 3 7. Darkroom test equipment and data ............................... 4 8. Appendix A Antenna Dimension .................................... 5 9. Appendix B Sll/VSWR .................................................... 5 10. Appendix C Gain and Efficiency .................................. 6 11. Appendix D Radiation Pattern(lD and 3D) .................. 7 12. Appendix E Test Setup Photo .................................... 13 1 FTY Technology Co.,Ltd 1. Product Description Product Name Grinding Machine Antenna Type Internal Antenna Maximum Gain:1.96dBi Efficiency:44.48% 2. General Description EUT Name External antenna Wireless type WIFI Antenna Type PCB antenna Dimensions Appendix A 3. Technical Information Frequency Range 2402MHz~2480MHz Test Frequency 2400,2410......2500MHz 2 FTY Technology Co.,Ltd 4. Test Standards Identity Document Title IEEE 149-1979 IEEE Standard Test Procedures for Antennas 5. Test Item Report Section Description Appendix B S11A/SWR Appendix C Gain and Efficiency Appendix D Radiation Pattern (1D and 3D) 6. Test Photo Report Section Description Appendix E Test Setup Photo 3 FTY Technology Co.,Ltd 7. Darkroom test equipment and data 5.0 Test Equipment Test system: shielded darkroom Test environment: temperature 22 °C± 3 °C , humidity 50% ± 15% Test equipment: when testing passive data, use AgilentE5071C network analyzer；When testing the active data, use the comprehensive tester CMW500 Shen zhen UP3D Tech Co.,Ltd 4 8. Appendix A Antenna Dimension Antenna Photo & Length (mm) 9. Appendix B Sll/VSWR requency （MHz) 2400 2450 2500 eturn Loss -9.46 -13 -11 SWR 1.8 1.5 1.8 Shen zhen UP3D Tech Co.,Ltd 5 10. Appendix C Gain and Efficiency Passive Test For D44 Freq (MHz) Effi (%) Effi (dB) Gain (dBi) Gain (dBd) UHIS (%) DHIS (%) Max (dB) Min (dB) Attenut Hor Attenut Ver 2400 40.43 -3.93 0.7 -1.45 16.061 24.371 0.7 -17.16 49.18 49.3 2410 39.54 -4.03 0.86 -1.29 15.756 23.785 0.86 -16.67 49.23 49.45 2420 40.88 -3.89 1.4 -0.75 16.635 24.243 1.4 -18.58 49.06 49.29 2430 42.5 -3.72 1.67 -0.48 17.57 24.935 1.67 -17.79 49.12 49.32 2440 44.48 -3.52 1.96 -0.19 18.796 25.689 1.96 -16.72 49.75 50.01 2450 43.2 -3.65 1.84 -0.31 18.687 24.512 1.84 -17.35 49.82 50.08 2460 41.57 -3.81 1.53 -0.62 18.485 23.085 1.53 -19.76 49.85 50.08 2470 38.01 -4.2 1.07 -1.08 17.234 20.774 1.07 -21.44 49.76 49.97 2480 38.23 -4.18 0.77 -1.38 17.723 20.511 0.77 -21.64 49.66 49.8 2490 35.02 -4.56 0.3 -1.85 16.519 18.504 0.3 -20.83 49.54 49.68 2500 28.21 -5.5 -0.77 -2.92 13.358 14.85 -0.77 -21.32 49.32 49.42 Shen zhen UP3D Tech Co.,Ltd 6 11. Appendix D Radiation Pattern(lD and 3D) Shen zhen UP3D Tech Co.,Ltd 7 Shen zhen UP3D Tech Co.,Ltd 8 Shen zhen UP3D Tech Co.,Ltd 9 Shen zhen UP3D …

Text truncated - open the document above for the full version.