2BOFL80030198560152Falcon IQ 2.0

PALIoT Solutions Inc. 13 Clark Street, Shortsville, NY 14548, United States Date: 27 May 2026 Element Materials Technology Washington DC LLC (formerly PCTEST) Telecommunication Certification Body (TCB) Division 7185 Oakland Mills Road Columbia, MD 21046 RE: Covered List Equipment for FCC ID: 2BOFL80030198560152 To whom it may concern: 1. Per 47 CRF Section 2.911(d)(5)(i) PALIoT Solutions Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization IS produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: N/A 2. Per 47 CRF Section 2.911(d)(5)(ii) PALIoT Solutions Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant ☐ IS /  IS NOT identified on the Covered List as an entity producing “covered” equipment. 3. Per KDB 986446 D01 v03 section B, 2a, PALIoT Solutions Inc. (“the applicant”) certifies that the equipment for this application does not contain Kaspersky cybersecurity or anti-virus software. Thank you, Martin Torpling Head of Technology PALIoT Solutions Inc.

PALIoT Solutions Inc. 13 Clark Street, Shortsville, NY 14548, United States Date: 03 June 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Cover Letter for FCC ID: 2BOFL80030198560152 To Whom It May Concern: Enclosed please find an application for an original equipment certification of the Falcon IQ 2.0 device with FCC ID 2BOFL80030198560152 under Rule Part FCC 15.247, 15.209, 15.203, 15.109, and/or any other applicable sections under Title 47. The device is a non-rechargeable battery-powered asset-tracking unit which utilizes a receive- only WiFi-based geolocation methodology, has passive (i.e. not transmitting) Near-Field Communication capabilities, and communicates only via a Bluetooth Low Energy (BLE) mesh network using the Wirepas stack. Sincerely, Martin Torpling Head of Technology PALIoT Solutions Inc.

PALIoT Solutions Inc. 13 Clark Street, Shortsville, NY 14548, United States Date: 22 May 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: 2BOFL80030198560152 To Whom It May Concern: Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, PALIoT Solutions Inc. hereby requests confidential treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give PALIoT Solutions Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested Long-Term and Short-Term Confidential exhibits are listed as follows: CONFIDENTIAL LIST Exhibit Description LONG-TERM 1 Block Diagram 2 Operational Descriptions 3 Parts Lists and Tune-Up Procedure 4 Schematics SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Martin Torpling Head of Technology PALIoT Solutions Inc.

PALIoT Solutions Inc. 13 Clark Street, Shortsville, NY 14548, United States Labelling of Falcon-IQ Device in Accordance with FCC Requirements Page 1 of 1 Date: 22 May 2026 Re: Labelling of Falcon-IQ Device in Accordance with FCC Requirements To whom it may concern: This is a record of the Federal Communications Commission (FCC) labelling of the device with FCC ID 2BOFL80030198560152. The following labelling is employed to satisfy sections 2.1033(b)(5) and 2.925 of the FCC Code of Federal Regulations (CFR) Title 47. Figure 1 shows a rendering of Falcon-IQ lid, with the debossed FCC ID – which is visible from the outside of the polycarbonate enclosure. This debossing is robust enough to last the lifetime of the product. Once the device is assembled, this lid is not user removable. Figure 1 – Rendering of Falcon-IQ lid with debossed FCC ID.

This report must not be used to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. This report is Blockchain Verified. To verify the report’s authenticity, please visit https://www.blockchain-verified.com/ or by clicking the logo to the right. PALIoT Solutions Inc. Asset Tracker FCC 1.1307:2026 FCC 2.1091:2026 Bluetooth Low Energy Report: PALT0002.3 Rev. 01, Issue Date: June 19, 2026 TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Evaluation .................................................................................. 3 Revision History .............................................................................................. 4 Facilities .......................................................................................................... 5 Product Description ......................................................................................... 6 Exposure Condition ......................................................................................... 7 Exemption From RF Exposure Evaluation ...................................................... 8 End of Report .................................................................................................. 11 Report No. PALT0002.3 Rev. 012/11 CERTIFICATE OF EVALUATION 2018-09-14 EXRPT.2025.09.03.0 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: June 8, 2026 PALIoT Solutions Inc. EUT: Asset Tracker RF Exposure Evaluation Standards Specification Method FCC 1.1307:2026 FCC 2.1091:2026 FCC 1.1307:2026 Results Method Clause Description Applied Results Comments (b)(3)(i)(B) Exemption From RF Exposure Evaluation Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. PALT0002.3 Rev. 013/11 REVISION HISTORY 2025.07.22 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Updated company name & Report reference 2026-06-19 1, 3, 6, 10 Report No. PALT0002.3 Rev. 014/11 FACILITIES 2025.07.17 Testing was performed at the following location(s) Location Labs (1) Address A2LA (2) ISED (3) BSMI (4) VCCI (5) CAB FDA (6) ☒ California OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 3310.04 2834B SL2-IN-E-1154R A-0029 US0158 TL-55 ☐ Minnesota MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612) 638-5136 3310.05 2834E SL2-IN-E-1152R A-0109 US0175 TL-57 ☐ Oregon EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 3310.02 2834D SL2-IN-E-1017 A-0108 US0017 TL-56 ☐ Washington NC01-05 19201 120th Ave NE Bothell, WA 98011 (425) 984-6600 3310.06 2834F SL2-IN-E-1153R A-0110 US0157 TL-67 ☐ Offsite N/A See Product Description N/A N/A N/A N/A N/A N/A See data sheets for specific labs (1) The lab designations denote individual rooms within each location. (OC01, OC02, OC03, etc.) (2) A2LA Certificate No. (3) ISED Company No. (4) BSMI No. (5) VCCI Site Filing No. (6) FDA ASCA No. Report No. PALT0002.3 Rev. 015/11 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: PALIoT Solutions Inc. Address: 13 Clark Street City, State, Zip: Shortsville, NY 14548 Evaluation Requested By: Martin Torpling EUT: Asset Tracker Date of Evaluation: 6/8/2026 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: Asset Tracker Objective: To demonstrate compliance with FCC Requirements for RF exposure for 1.1307 RF exempt devices Report No. PALT0002.3 Rev. 016/11 RF EXPOSURE CONDITION 2018-07-17 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Mobile Location on Body (if applicable) N/A How is the Device Used The device is mounted in a shipping pallet Radios Contained in the Same Host Device Bluetooth Low Energy Simultaneous Transmitting Radios None Body Worn Accessories N/A Environment General Population/Uncontrolled Exposure Report No. PALT0002.3 Rev. 017/11 EXEMPTION FROM RF EXPOSURE EVALUATION EXRPT.2025.09.03.0 OVERVIEW Section 1.3 of KDB 44798 D04 v01 states that, “Under the new rules, all radio services and operations are subject to Routine Evaluation [§§ 1.1307(b)(1), 2.1033(f), etc.], unless shown to qualify under the exemptions provided in the rules and OET Lab policies for equipment authorization.” The glossary of KDB 447498 D04 v01 specifies that an exempt RF device is defined “solely from the obligation to perform a routine environmental evaluation to demonstrate compliance with the RF exposure limits in § 1.1310; it is not exemption from the equipment authorization procedures described in 47 CFR Part 2, not exemption from general obligations of compliance with the RF exposure limits in § 1.1310 of this chapter, and not exemption from determination of whether there is no significant effect on the quality of the human environment under § 1.1306.” Compliance with the exemption criteria define…

Text truncated - open the document above for the full version.

PALIoT Solutions Inc. 13 Clark Street, Shortsville, NY 14548, United States Non-confidential Antenna Information Page 1 of 2 Date: 03 June 2026 Re: Non-confidential Antenna Information To whom it may concern: The following relates to the Bluetooth Low Energy (BLE) antenna information on the device with FCC ID 2BOFL80030198560152. The BLE antenna is a proprietary Printed Circuit Board (PCB) trace antenna design with a 50 Ohm input. The schematic representation is shown in Figure 1, and photographs of the actual antenna are shown in Figure 2 and Figure 3. In free-space, the peak gain of the antenna is 1.0 dBi. However, in its intended application this increases to 1.9 dBi. Figure 1 - The schematic representation of the proprietary BLE antenna. Figure 2 - The proprietary BLE antenna positioning on the PCB is highlighted by the red rectangle. Note, for confidentiality reasons this image is not to scale and unrelated circuitry is blurred. PALIoT Solutions Inc. 13 Clark Street, Shortsville, NY 14548, United States Non-confidential Antenna Information Page 2 of 2 Figure 3 - A zoomed-in image of the proprietary BLE antenna. Note, for confidentiality reasons this image is not to scale.

Report No.: TRP03767-1-26 Page 1 of 21 This document shall not be reproduced (unless in full) without written consent from iSERT (Pty) Ltd. SUMMARY PERFORMANCE REPORT CLIENT / APPLICANT : PALIoT Solutions LLC (Pty) Ltd CLIENT ADDRESS : 13 Clark St, Shortsville, NY 14548, United States TEST SAMPLE (AUT) : Falcon IQ 2.0 PART NUMBER : Antenna Test Sample REPORT TYPE : Antenna Performance Report REPORT NUMBER : TRP03767-1-26 DATE ISSUED : 10/04/2026 REVISION : 1.0 iSERT (Pty) Ltd. Test reports apply only to the specific sample(s) tested under stated conditions. All samples tested were in good operating condition throughout the entire test program. It is the manufacturer’s responsibility to ensure that additional production units of this model are manufactured with identical electrical and mechanical components. iSERT (Pty) Ltd. shall have no liability for any deductions, inference or generalizations drawn by the client or others from the test reports issued by iSERT (Pty) Ltd. This report shall not be used to claim, constitute, or imply a product endorsement from iSERT (Pty) Ltd. This report was compiled by: Name: HE Olivier Title: Technical Signatory (RF) This report was approved by: Name: RM van den Berg Title: Technical Signatory (RF) This test report is issued in accordance with SANAS accreditation requirements. SANAS is a signatory to the ILAC Mutual Recognition arrangement for the mutual recognition of the equivalence of testing and calibration reports. T0812 Report Number: TRP03767-1-26 Revision: 1.0 Page 2 of 21 This document shall not be reproduced (unless in full) without written consent from iSERT (Pty) Ltd. DOCUMENT CONTROL Revision Date Author Change proposal 1.0 10/04/2026 HE Olivier N/A TEST LABORATORY INFORMATION Established in 2017, iSERT (Pty) Ltd. Provides EMC, RF, Safety & Performance testing services by our skilled Engineers. Our services employ a wide variety of advanced cutting-edge test equipment with one of the widest ranges of accredited standards in the country. The site and apparatus are constructed in conformance with the requirements of CISPR 16-1-4, EN 50147-1 and other equivalent standards. The laboratory is compliant with the requirements of ISO/IEC 17025. It is our definite objective to institute long-term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise, and devotion to a certified value structure. Our passion is to grant our clients with the best EMC, RF, Safety & Performance services by knowledgeable and accommodating staff. Our test site is located at 129 Khai-Appel Street, Montana, Pretoria, South Africa 0186. Company details: iSERT (Pty) Ltd. Reg: 2017/186396/07 Tel: + 27 (0)12 548 0940 E-Mail: [email protected] Website: www.isert.co.za Report Number: TRP03767-1-26 Revision: 1.0 Page 3 of 21 This document shall not be reproduced (unless in full) without written consent from iSERT (Pty) Ltd. TEST LABORATORY ACCERDITATION CERTIFICATE Report Number: TRP03767-1-26 Revision: 1.0 Page 4 of 21 This document shall not be reproduced (unless in full) without written consent from iSERT (Pty) Ltd. ACRONYMS AND ABBREVIATIONS AUT Antenna Under Test AVE Average ARFCN Absolute Radio Frequency Channel Number C Circular CSE Conducted Spurious Emissions CSIR Council for Scientific and Industrial Research DCS Digital Cellular System E-Fields Electric Fields EIRP Effective isotropic radiated power ERP Effective radiated power EFT Electrical Fast Transients EMC Electromagnetic Compatibility EMI Electromagnetic Interference ESD Electrostatic Discharge EUT Equipment Under Test FW Firmware GPRS General packet radio service GSM Global System for Mobile Communications HW Hardware MS Mobile Station NIST National Institute of Science and Technology N/A Not Applicable NM Not Measured OATS Open Area Test Site PC Personal Computer PK Peak Pol Polarized QP Quasi-Peak RSE Radiated Spurious Emissions RED Radio Equipment Directive RCSE Receiver Conducted Spurious Emissions (idle mode) RMS Root Mean Square RRSE Receiver Radiated Spurious Emissions (idle mode) RSE Radiated Spurious Emissions RF Radio Frequency R&TTE Radio and telecommunications terminal equipment SANAS South African National Accreditation System SRD Short Range Equipment TCSE Transmitted conducted Spurious Emissions (allocated mode) TRSE Transmitted Radiated Spurious Emissions (allocated mode) VH Voltage High (Maximum VL Voltage Low (minimum) VN Voltage Normal TH Temperature High (maximum) TN Temperature Normal TL Temperature Low (Minimum) Report Number: TRP03767-1-26 Revision: 1.0 Page 5 of 21 This document shall not be reproduced (unless in full) without written consent from iSERT (Pty) Ltd. TABLE OF CONTENTS 1. PURPOSE ................................................................................................................................................. 6 2. REFERENCE STANDARDS .................................................................................................................... 6 3. SUMMARY OF TEST RESULTS ............................................................................................................. 6 4. EQUIPMENT DESCRIPTION ................................................................................................................... 7 5. MEASURING EQUIPMENT SETUP AND CONFIGURATION ................................................................ 7 5.1. MEASUREMENT EQUIPMENT ....................................................................................................... 7 5.2. MEASUREMENT UNCERTAINTY ................................................................................................... 8 5.3. MEASUREMENT SETUP ................................................................................................................ 8 5.4. ENVIRONMENTAL CONDITIONS ................................................................................................... 9 6. DETAILS OF AS…

Text truncated - open the document above for the full version.

This report is Blockchain Verified. To verify the report’s authenticity, please visit https://www.blockchain-verified.com/ or by clicking the logo to the right. PALIoT Solutions Inc. Asset Tracker FCC 15.247:2026 Bluetooth Low Energy (DTS) Radio Report: PALT0002.1 Rev. 02, Issue Date: June 19, 2026 TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Test ............................................................................................ 3 Revision History .............................................................................................. 4 Facilities .......................................................................................................... 5 Measurement Uncertainty ............................................................................... 6 Test Setup Block Diagrams ............................................................................. 7 Product Description ......................................................................................... 10 Power Settings and Antenna Gain .................................................................. 11 Configurations ................................................................................................. 12 Modifications ................................................................................................... 14 Duty Cycle ....................................................................................................... 15 DTS Bandwidth (6 dB) .................................................................................... 18 Occupied Bandwidth (99%) ............................................................................. 21 Output Power .................................................................................................. 24 Equivalent Isotropic Radiated Power .............................................................. 27 Power Spectral Density ................................................................................... 30 Band Edge Compliance .................................................................................. 33 Spurious Conducted Emissions ...................................................................... 36 Radiated Band Edge Emissions ...................................................................... 40 Spurious Radiated Emissions 9 kHz to 1 GHz ................................................ 44 Spurious Radiated Emissions 1 GHz to 26.5 GHz .......................................... 50 Appendix A - Derivation of Operational Duty Cycle Cover Page ..................... 59 End of Report .................................................................................................. 63 Report No. PALT0002.1 Rev 022/63 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: May 19, 2026 PALIoT Solutions Inc. EUT: Asset Tracker Radio Equipment Testing Standards Specification Method FCC 15.247:2026 ANSI C63.10:2020 Cor.1:2023 Guidance FCC KDB 558074 v05r02:2019 Results Test Description Result Specification Section(s) Method Section(s) Comments Powerline Conducted Emissions N/A 15.207 6.2 Not required for a battery powered EUT. Duty Cycle Pass KDB 558074 -6.0 11.6 DTS Bandwidth (6 dB) Pass 15.247(a)(2), KDB 558074 -8.2 11.8.2 Occupied Bandwidth (99%) Pass KDB 558074 -2.1 6.9.3 Output Power Pass 15.247(b)(3), KDB 558074 -8.3.1 11.9.1.1 Equivalent Isotropic Radiated Power Pass 15.247(b)(3), KDB 558074 -8.3.1 11.9.1.1 Power Spectral Density Pass 15.247(e), KDB 558074 -8.4 11.10.2 Band Edge Compliance Pass 15.247(d), KDB 558074 -8.5 11.11 Spurious Conducted Emissions Pass 15.247(d), KDB 558074 -8.5 11.11 Radiated Band Edge Emissions Pass 15.247(d), KDB 558074 - 8.6, 8.7 11.12.1, 11.13.2, 6.6 Spurious Radiated Emissions Pass 15.247(d), KDB 558074 - 8.6, 8.7 11.12.1, 11.13.2, 6.4, 6.5, 6.6 Deviations From Test Standards None Approved By: Trevor Buls, Principal EMC Test Engineer Signed for and on behalf of Element Report No. PALT0002.1 Rev 023/63 REVISION HISTORY 2025.07.22 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Revise dBi for Antenna Gain and remove additional notes 2026-06-04 11 Add to Test Description where the explanation of how the maximum operational duty cycle is derived and remove all data as explanation is in Appendix A. 2026-06-04 18 Revise dBi for Antenna Gain on EIRP per Antenna Report 2026-06-04 28 Remove QP and Update Title for Spurious Emissions 2026-06-04 45-50 Combine Data from 1 GHz to 26.5 GHz 2026-06-04 53-55 Add Appendix A for Derivation of Operational Duty Cycle 2026-06-04 61 Revise Duty Cycle Correction Factor to the correct formula. 2026-06-08 54 Revise Duty Cycle Explanation to clearly define the worst case 2026-06-09 Appendix A 02 Updated company name, clarified antenna gain and duty cycle correction factors 2026-06-19 1, 3, 10, 12,13, 16, 20, 23, 26, 29, 32, 35, 38, 42, 46, 53 Report No. PALT0002.1 Rev 024/63 FACILITIES 2025.07.17 Testing was performed at the following lo…

Text truncated - open the document above for the full version.

SPURIOUS CONDUCTED EMISSIONS TbtTx 2026.02.05.0 WTD.2025.08.28.0 TEST DESCRIPTION Testing was performed using the mode(s) of operation and configuration(s) noted within the report. The individuals and/or the organization requesting the test provided the modes, configurations and settings used to complete the evaluation. The actual test parameters are specified in the test data, this includes items such as investigated frequency range (scanned) and test levels. The testing methods and performance specifications, as well as the test site used for the evaluation are indicated in the test data. The measurement was made using a direct connection between the RF output of the EUT and a spectrum analyzer. The spurious RF conducted emissions were measured with the EUT set to low, medium and high transmit frequencies. The EUT was transmitting at the data rate(s) listed in the datasheet. For each transmit frequency, the fundamental was measured with a 100 kHz resolution bandwidth and the highest value was recorded. The rest of the spectrum was then measured with a 100 kHz resolution bandwidth and the highest value was found. The difference between the value found on the fundamental and the rest of the spectrum was compared against the limit to determine compliance. The reference level offset for the fundamental screen capture was based on a measured value of the loss between the spectrum analyzer and the EUT which was verified at the time of test. The remaining screen capture(s) use an internal transducer factor on the analyzer to correct the displayed trace based on the cable loss over frequency. The reference level offset for the additional screen capture(s) is then based on the expected attenuator value and any other losses. Fundamental Offset = Ref Lvl Offset showing measured composite factor of all losses Remaining Screen capture(s) Offset = “Internal” cable loss factor not shown on screen capture + Ref Lvl Offset showing expected attenuator value and any other losses TEST EQUIPMENT Description Manufacturer Model ID Last Cal. Cal. Due Generator - Signal Agilent E8257D TGU 2023-11-08 2026-11-08 Analyzer - Spectrum Analyzer Agilent N9010A AFJ 2026-03-24 2027-03-24 Cable Micro-Coax UFD150A-1-0720-200200 OCA 2025-10-21 2026-10-21 Block - DC Aeroflex INMET 8535 AMO 2025-12-04 2026-12-04 Attenuator Fairview Microwave SA18H-20 UAZ 2026-03-25 2027-03-25 Report No. PALT0002.1 Rev 0236/63 SPURIOUS CONDUCTED EMISSIONS TbtTx 2026.02.05.0 WTD.2025.08.28.0 EUT: Asset Tracker Work Order: PALT0002 Serial Number: Conducted Engineering Sample 001 Date: 2026-05-19 Customer: PALIoT Solutions Inc. Temperature: 23.7°C Attendees: Kurt Coetzer Relative Humidity: 52.7% Customer Project: None Bar. Pressure (PMSL): 1014 mbar Tested By: Kyle Fujimoto Job Site: OC13 Power: 3.6 Vdc via Battery Configuration: PALT0002-2 COMMENTS Reference Level Offset includes, Cable Loss, 20 dB Attenuator, and DC Block DEVIATIONS FROM TEST STANDARD None CONCLUSION Pass Tested By TEST RESULTS Frequency Measured Max Value Limit Range Freq (MHz) (dBc) ≤ (dBc) Result BLE/GFSK 1 Mbps Low Channel, 2402 MHz Fundamental 2402.07 N/A N/A N/A 30 MHz - 12.5 GHz 2497.81 -47.87 -20 Pass 12.5 GHz - 25 GHz 23565.5 -53.26 -20 Pass Mid Channel, 2440 MHz Fundamental 2440.07 N/A N/A N/A 30 MHz - 12.5 GHz 2552.62 -49.54 -20 Pass 12.5 GHz - 25 GHz 22306.49 -53.61 -20 Pass High Channel, 2480 MHz Fundamental 2480.08 N/A N/A N/A 30 MHz - 12.5 GHz 2575.46 -48.58 -20 Pass 12.5 GHz - 25 GHz 22515.57 -54.04 -20 Pass Report No. PALT0002.1 Rev 0237/63 SPURIOUS CONDUCTED EMISSIONS TbtTx 2026.02.05.0 WTD.2025.08.28.0 BLE/GFSK 1 Mbps Low Channel, 2402 MHz BLE/GFSK 1 Mbps Low Channel, 2402 MHz BLE/GFSK 1 Mbps Low Channel, 2402 MHz BLE/GFSK 1 Mbps Mid Channel, 2440 MHz BLE/GFSK 1 Mbps Mid Channel, 2440 MHz BLE/GFSK 1 Mbps Mid Channel, 2440 MHz Report No. PALT0002.1 Rev 0238/63 SPURIOUS CONDUCTED EMISSIONS TbtTx 2026.02.05.0 WTD.2025.08.28.0 BLE/GFSK 1 Mbps High Channel, 2480 MHz BLE/GFSK 1 Mbps High Channel, 2480 MHz BLE/GFSK 1 Mbps High Channel, 2480 MHz Report No. PALT0002.1 Rev 0239/63 RADIATED SPURIOUS EMISSIONS RESTRICTED BAND EDGE EmiR5 2025.04.30.2 WTD.2025.08.28.0 TEST DESCRIPTION Testing was performed using the mode(s) of operation and configuration(s) noted within the report. The individuals and/or the organization requesting the test provided the modes, configurations and settings used to complete the evaluation. The actual test parameters are specified in the test data, this includes items such as investigated frequency range (scanned) and test levels. The testing methods and performance specifications, as well as the test site used for the evaluation are indicated in the test data. The measurement was made using a direct connection between the RF output of the EUT and a spectrum analyzer. The highest gain antenna of each type to be used with the EUT was tested. The EUT was configured for the required transmit frequencies and the modes as showed in the data sheets. The emissions from the EUT were maximized by rotating the EUT on a turntable, adjusting the position of the EUT and EUT antenna in three orthogonal axis if required, and adjusting the measurement antenna height and polarization (per ANSI C63.10). A preamp and attenuation were used (if needed) for this test in order to provide sufficient measurement sensitivity. Measurements were made with the required detectors and annotated on the data for each individual point using the following annotation: PK = Peak Detector AV = RMS Detector Measurements within 2 MHz of the allowable band may have been taken using the integration method from ANSI C63.10 clause 11.13.3. This procedure uses the channel power feature of the spectrum analyzer to integrate the power of the emission within a 1 MHz bandwidth. Where the radio test software does not provide for a duty cycle at continuous transmit conditions (> 98%) and the RMS (power average) measurements were made across the on and off times of the EUT transmissions, a …

Text truncated - open the document above for the full version.