2BOIL-PMR125PM-R125

PM-R125 RFID LF INTERFACE MODULE USER MANUAL PM-R125 TECNINT HTE Page 2 of 22 The data contained in this publication have been carefully examined, anyway Tecnint HTE doesn’t take any responsibility for eventual mistakes or omissions. Tecnint HTE doesn’t take any responsibility for use of the information contained in it and for the relevant devices. Tecnint HTE may change at any time and without notice the characteristics and models described in this publication due to technical or commercial reasons. No part of this publication can be reproduced in any form or by electronic or mechanical means. No use is allowed without Tecnint HTE written permission and/or license. For further details, the Customer may apply to Tecnint HTE. Printed in Italy Record Document Number Revision Date MAN-PM-R125 1 2025/10/07 Product Name Version PM-R125-TTL PM-R125-232 0.0 0.0 Signature Written Verified Approved Fag Bro Pfr DOCUMENTO CON FIRMA ELETTRONICA – DOCUMENT WITH ELECTRONIC SIGNATURE Via della Tecnica, 16/18 23875 Osnago (LC) - ITALY PHONE +39 39 5969100 - FAX +39 39 5969124 E-mail : [email protected] : [email protected] PM-R125 TECNINT HTE Page 3 of 22 TABLE OF CONTENTS 1. INTRODUCTION ............................................................................................................ 5 1.1. APPLICABILITY ................................................................................................................ 5 2. REGULATORY ............................................................................................................... 6 2.1. INTENDED USE ................................................................................................................ 6 2.2. WARRANTY ..................................................................................................................... 6 2.3. FCC STATEMENT ............................................................................................................ 7 2.4. ISED STATEMENT / DECLARATION ............................................................................... 11 2.5. END OF LIFE ................................................................................................................... 13 3. SPECIFICATIONS ........................................................................................................ 14 3.1. ELECTRICAL CHARACTERISTICS .................................................................................... 14 3.2. MECHANICAL AND ENVIRONMENTAL CHARACTERISTICS .............................................. 14 4. CONNECTIONS ............................................................................................................ 15 4.1. CONNECTIONS LAYOUT ................................................................................................. 15 5. OPERATIONAL DESCRIPTION ............................................................................... 17 5.1. LED STATUS MESSAGES ................................................................................................ 19 5.2. CONFIGURATION ........................................................................................................... 20 6. APPENDIX ..................................................................................................................... 21 6.1. RECOMMENDED ANTENNAS .......................................................................................... 21 PM-R125 TECNINT HTE Page 4 of 22 Page intentionally left blank PM-R125 TECNINT HTE Page 5 of 22 1. Introduction This manual describes the RFID LF Interface module type PM-R125. The module has been developed for an easy integration in OEM systems for RFID reading and writing. The module is intended as internal component of the OEM device; module supply, connection, prescribed antennas and programming are exposed in this manual. 1.1. Applicability The module is available in two arrangements of the serial communication port: TTL or RS-232 buffered. Model Description PM-R125-232 Version with RS-232 serial port for use with the prescribed LF (125kHz) tuned antennas. PM-R125-TTL Version with serial port at TTL level for use with the prescribed LF (125kHz) tuned antennas. Fig. 1: Aspect PM-R125 TECNINT HTE Page 6 of 22 2. Regulatory This device has been tested and complies with the following regulations FCC CFR Part 15 (Title 47 of the Code of Federal Regulations, Chapter I, Subchapter A, Part 15, “Radio Frequency Devices”) ISED Radio Standards Specification RSS-210, Issue 11 Radio Equipment Directive 2014/53/EU and amendments Restriction of Hazardous Substances Directive 2011/65/EU and amendments 2.1. Intended Use The device is intended as LF (125kHz) interface module for LF RFID reading/writing to be integrated into OEM equipment. 2.2. Warranty Tecnint HTE Srl grants to repair or, at their own discretion, to replace every and all parts recognized as defective for materials o construction under normal operating conditions for a period of 1 year from purchase date, as it can be inferred from the User’s purchase documents. Warranty does not cover faults due to: • Usage that differs from the intended use as reported in this manual. • Tampering or misuse of the appliance. • Improper installation. • Operation under out-of-specification environmental condition for this appliance. ATTENTION Warranty is effected at Tecnint HTE Srl Factory. Back shipment shall be arranged by the Customer; in this case a shipping covered by insurance is recommended. The customer will be responsible for damages due to inadequate packaging. Responsibility Tecnint HTE Srl is not liable for damages due to: • External causes (mechanical/electrical damages due to any events which exceed the specification limits) • Different usage from the intended use of the device. • Any improper use or misuse of the device not compliant with the indications of this manual • Servicing or tampering by unauthorized personnel. PM-R125 TECNINT HTE Page 7 of 22 2.3. FCC Statement This…

Text truncated - open the document above for the full version.

Setup photos REP089424, REP089425, REP089429 Date of issue: April 3, 2025 REP089430 Date of issue: April 1, 2025 REP089428 Date of issue: March 31, 2025 Applicant: Tecnint HTE Srl Via della Tecnica 16/18 23875 Osnago (LC) – Italy Product name: Read/Write LF 125kHz RFID OEM device with external antenna Model: PM-R125-232 Variant: PM-R125-TTL FCC ID: IC Registration number: 2BOIL-PMR125 33762-PMR125 Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 2 of 11 Section 1. Setup photos (FCC §15.209 / RSS-Gen §8.9) 1.1 Radiated emissions set-up for frequencies below 30 MHz Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 3 of 11 1.2 Radiated emissions set-up for frequencies above 30 MHz up to 1 GHz Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 4 of 11 Section 2. Setup photos (§15.107 / ICES-003 §6.1) 2.1 Conducted emissions Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 5 of 11 Section 3. Setup photos (§15.109 / ICES-003 §6.2) 3.1 Radiated emissions Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 6 of 11 Section 4. Nerve simulation (RSS-102.NS.MEAS) Point 1 – Left side Point 2 – Right side Point 3 – Bottom side Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 7 of 11 Point 4 – Front side Point 5 – Top side Point 6 – Rear side Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 8 of 11 Section 5. Setup photos (EUT) EUT with antenna 7043L Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 9 of 11 EUT with antenna 7044L-124.0 Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 10 of 11 Auxiliary equipment Report reference ID: REP089424, REP089425, REP089429, REP089430, REP089428 Page 11 of 11

Caratteristiche Generali Antenna LF oem custom Realizzata a partire da antenna standard 1501L Caratteristiche Tecniche Diametro esterno bobina 28,6 ± 1mm Diametro interno bobina 24,0 ± 1mm Spessore bobina 2,8 ± 0,5mm Temperatura operativa -10°C ÷ 55°C Lunghezze cavetti 250mm tra connettore Molex e modulo di accordo 40mm tra modulo di accordo e antenna Connettore Molex M 29-11-0033 Taratura In aria a 124.0 ± 0.5kHz Induttanza 350 uH Impedenza 4 ohm Fatt. di merito 67 Diam. filo Cu smaltato 0,23mm N° spire 87 Codice articolo Quanta System EAM001412 ASE srl - Phone +39 059 6229900 - Fax +39 059 642851 - [email protected] - www.asedis.it 7044L-124.0

Caratteristiche Generali Antenna LF oem custom Realizzata a partire da antenna standard 1504L Caratteristiche Tecniche Diametro esterno bobina 68,0 ± 1mm Diametro interno bobina 63,0 ± 1mm Spessore bobina 3,0 ± 0,5mm Temperatura operativa -10°C ÷ 55°C Lunghezza cavetti 80mm tra connettore Molex e modulo di accordo 40mm tra modulo di accordo e antenna Connettore Molex M 29-11-0033 Taratura 125kHz ± 0,5kHz con antenna già montata sul pannello fornito dal cliente come riferimento Induttanza 350 uH Impedenza 1,85 ohm Fatt. di merito 145 Diam. filo Cu smaltato 0,4mm N° spire 51 Codice articolo Quanta System EBQ000490 ASE srl - Phone +39 059 6229900 - Fax +39 059 642851 - [email protected] - www.asedis.it 7043L

This test report shall not be partially reproduced without the prior written consent of Nemko S.p.A. The phase of sampling of equipment under test is carried out by the customer. Results indicated in this report refer exclusively to the tested samples and apply to the sample as received. Doc. No. TRF001 Rev. 3 Date 2025-04-04 TEST REPORT Electromagnetic Compatibility Report Reference No. .............. : REP089428 Date of issue .............................. : 2025-03-31 Test Report Verdict .................... : PASS Testing Laboratory ................... : Nemko S.p.A. Address ...................................... : Via Del Carroccio, 4 City ............................................ : 20853 Biassono (MB) Country ...................................... : Italy Testing location .......................... : Described at clause 1.4 Customer name ........................ : Tecnint HTE Srl Customer information ................. : Via della Tecnica 16/18 23875 Osnago (LC) – Italy Reference standards ................ : FCC CFR 47 Part 15 Subpart B Standard application .................. : Full application Equipment under test .............. : Read/Write LF 125kHz RFID OEM device with external antenna Trademark(s) ............................. : Manufacturer .............................. : Tecnint HTE Srl Model/Type reference ................ : Described at clause 4.1 Tests performed by .................... : D. Guarnone Report approved by .................... : R. Giampaglia Report n° REP089428 page 2 / 34 CONTENTS 1. GENERAL INFORMATION .............................................................................................. 3 1.1 Project history ......................................................................................................................................... 3 1.2 Symbol used in the report ....................................................................................................................... 3 1.3 Date of sample(s) reception and tests .................................................................................................... 3 1.4 Testing location ....................................................................................................................................... 4 1.5 Environmental conditions ....................................................................................................................... 4 1.6 Measurement uncertainty and assessment of conformity ..................................................................... 4 1.7 Instruments calibration table .................................................................................................................. 6 2. PRODUCT STANDARDS, TEST METHODS AND TECHNICAL PROCEDURES .......... 7 2.1 Standard(s) applied.................................................................................................................................. 7 2.2 Test method(s) applied ............................................................................................................................ 7 2.3 Nemko technical procedures ................................................................................................................... 7 3. SUMMARY OF TEST RESULTS AND VERDICTS ......................................................... 8 3.1 Measurement of electromagnetic disturbances emitted by the equipment under test ........................ 8 4. EQUIPMENT UNDER TEST ............................................................................................ 9 4.1 EUT Identification .................................................................................................................................... 9 4.2 EUT Power Supply .................................................................................................................................. 10 4.3 EUT Information declared by the Customer 1 ....................................................................................... 10 4.4 EUT Operation Modes ........................................................................................................................... 10 4.5 EUT Configuration Modes...................................................................................................................... 11 4.6 EUT Input/Output Ports ......................................................................................................................... 11 4.7 EUT and Equipment Used During Test .................................................................................................. 12 4.8 EUT Electric/Block Diagram ................................................................................................................... 13 4.9 Information about radio module(s) ....................................................................................................... 13 5 TEST RESULTS ............................................................................................................. 14 5.1 Radiated Emission ................................................................................................................................. 14 5.2 Conducted emission .............................................................................................................................. 25 6 EUT PHOTOS ................................................................................................................ 31 Report n° REP089428 page 3 / 34 1. GENERAL INFORMATION 1.1 Project history Report number Modification to the report / comments Date REP089428 First release 2025-03-28 -- -- -- -- -- -- -- -- -- 1.2 Symbol used in the report ☒ ................................................... : The crossed square indicates that the listed condition, standard or equipment is applicable for this report. ☐ ................................................... : The empty square indicates that the listed condition, standard or equipment is not …

Text truncated - open the document above for the full version.

This test report shall not be partially reproduced without the prior written consent of Nemko S.p.A. The phase of sampling of equipment under test is carried out by the customer. Results indicated in this report refer exclusively to the tested samples and apply to the sample as received. Doc. No. TRF001 Rev. 3 Date 2025-04-04 RADIO TEST REPORT – REP089424 Type of assessment: Modular approval Applicant: Tecnint HTE Srl Via della Tecnica 16/18 23875 Osnago (LC) – Italy Product: Read/Write LF 125kHz RFID OEM device with external antenna Model: Variant: PM-R125-232 PM-R125-TTL FCC ID: IC Registration number: 2BOIL-PMR125 33762-PMR125 Specifications:  FCC 47 CFR Part 15 Subpart C Date of issue: April 3, 2025 D. Guarnone Tested by Signature R. Giampaglia Reviewed by Signature Report reference ID: REP089424 Page 2 of 38 Lab locations Company name Nemko Spa Address Via del Carroccio, 4 City Biassono Province MB Postal code 20853 Country Italy Telephone +39 039 220 12 01 Facsimile +39 039 220 12 21 Website www.nemko.com Site number 682159 (FCC) and 9109A (ISED), 10 m semi anechoic chamber Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Spa ISO/IEC 17025 accreditation. Copyright notification Nemko Spa authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Spa accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Report reference ID: REP089424 Page 3 of 38 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Statement of compliance ......................................................................................................................................................................................... 4 1.4 Exclusions ................................................................................................................................................................................................................. 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart C, general requirements test results ........................................................................................................................................ 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Applicant/Manufacture ............................................................................................................................................................................................ 6 3.2 Sample information .................................................................................................................................................................................................. 6 3.3 EUT information ....................................................................................................................................................................................................... 6 3.4 Technical information .............................................................................................................................................................................................. 6 3.5 Product description and theory of operation ........................................................................................................................................................... 7 3.6 EUT exercise details .................................................................................................................................................................................................. 8 3.7 EUT interface ports................................................................................................................................................................................................... 8 3.8 Support equipment .................................................................................................................................................................................................. 8 Section 4. Engineering considerations ...................................................…

Text truncated - open the document above for the full version.

Manufacturer:Tecnint HTE SrlName:Roberto Giampaglia Product:PM-R125Title:Laboratory Manager FCC ID:2BOIL-PMR125Signature: 1-mW Test Exemption ModeFrequencyDuty CyclePower Antenna GainEIRP 2 EIRPDistancePD 1 MHz%dBmdBidBmmWcm mW/cm 2 RFID0.125100-18.70-18.700.0135200.000003 1 PD = EIRP / (4xπxD 2 ) 2 See FCC ID: 2BOIL-PMR125 test report n. REP089424 (66.7 dBμV/m @ 10 m with loop antenna 7043L are -18.07 dBm EIRP) According to FCC KDB Publication KDB447498 D04 V01, Section 2.1.2, "1-mW Test Exemption": per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption.

HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] PM-R125-TTL front HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] PM-R125-TTL rear HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] PM-R125-TTL with antenna PM-R125-ANT7044L124 Alternative antenna PM-R125-ANT7043L

HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] TECNINT HTE S.r.l. - CAPITALE VERSATO € 500.000 - SEDE LEGALE: Osnago (LC), Via della Tecnica, 16/18 REGISTRO DELLE IMPRESE N. 04165560378 - R.E.A. N. 286378 - EXPORT M LC 017106 - CF 04165560378 - P. IVA 02349750139 1 di 3 PM-R125-232 front HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] TECNINT HTE S.r.l. - CAPITALE VERSATO € 500.000 - SEDE LEGALE: Osnago (LC), Via della Tecnica, 16/18 REGISTRO DELLE IMPRESE N. 04165560378 - R.E.A. N. 286378 - EXPORT M LC 017106 - CF 04165560378 - P. IVA 02349750139 2 di 3 PM-R125-232 rear HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] TECNINT HTE S.r.l. - CAPITALE VERSATO € 500.000 - SEDE LEGALE: Osnago (LC), Via della Tecnica, 16/18 REGISTRO DELLE IMPRESE N. 04165560378 - R.E.A. N. 286378 - EXPORT M LC 017106 - CF 04165560378 - P. IVA 02349750139 3 di 3 PM-R125-232 with antenna PM-R125-ANT7044L124 Alternative antenna PM-R125-ANT7043L

U.S.AgentDesignationforServiceofProcess- CertificationAttestationLetter Date: ATTN.:ReviewingEngineer FCCID: Persection2.911(d)(7)oftheFCCrules,(“theapplicant”), FRN:certifiesthattheequipmentforwhichauthorizationissoughtis designatedtothefollowingU.S.agent*forserviceofprocess: CompanyName:+1ComplianceLLC PhysicalU.S.CompanyAddress:2113HuronCircle,Denton,Texas76210USA FRN:0033497389 Agentname:BenjaminW.Tidwell AgentEmailAddress:[email protected] Theabovecontactpersonacceptstheobligationforserviceofprocess. Theapplicantacceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-related proceedinginvolvingtheequipment. ApplicantSigned:AgentSigned: Signed:Signed: Printedname:Printedname:BenjaminW.Tidwell Title:Title:President Company:Company:+1ComplianceLLC FRN:FRN:0033497389 Date:Date: * theapplicantmustdesignateacontactlocatedintheUnitedStatesforpurposesofactingasthe applicant’sagentforserviceofprocess,regardlessofwhethertheapplicantisadomesticorforeign entity.AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforserviceofprocess. Docusign Envelope ID: 9EC2CA01-F70E-48AA-86E5-845C0B8CF93E Agostino Facciotti 0036854149 Tecnint HTE Srl 13 maggio 2025 0036854149 Tecnint HTE Srl QH&SE Systems Manager 2BOIL-PMR125 13 May 2025 13 May 2025

HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] PM-R125-TTL front HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] PM-R125-TTL rear HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] PM-R125-TTL with antenna PM-R125-ANT7044L124 Alternative antenna PM-R125-ANT7043L

HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] TECNINT HTE S.r.l. - CAPITALE VERSATO € 500.000 - SEDE LEGALE: Osnago (LC), Via della Tecnica, 16/18 REGISTRO DELLE IMPRESE N. 04165560378 - R.E.A. N. 286378 - EXPORT M LC 017106 - CF 04165560378 - P. IVA 02349750139 1 di 3 PM-R125-232 front HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] TECNINT HTE S.r.l. - CAPITALE VERSATO € 500.000 - SEDE LEGALE: Osnago (LC), Via della Tecnica, 16/18 REGISTRO DELLE IMPRESE N. 04165560378 - R.E.A. N. 286378 - EXPORT M LC 017106 - CF 04165560378 - P. IVA 02349750139 2 di 3 PM-R125-232 rear HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] TECNINT HTE S.r.l. - CAPITALE VERSATO € 500.000 - SEDE LEGALE: Osnago (LC), Via della Tecnica, 16/18 REGISTRO DELLE IMPRESE N. 04165560378 - R.E.A. N. 286378 - EXPORT M LC 017106 - CF 04165560378 - P. IVA 02349750139 3 di 3 PM-R125-232 with antenna PM-R125-ANT7044L124 Alternative antenna PM-R125-ANT7043L

HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2BOIL-PMR125 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☐ Short Term Internal Photos ☐ Permanent* ☐ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☒ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☐ Short Term User’s Manual ☐ Permanent* ☐ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Date: 9/1/2025 Printed name: Agostino Facciotti Title: QH&SE Systems Manager Company Name: Tecnint HTE Srl

HEADQUARTER Via della Tecnica, 16/18 - 23875 Osnago (LC) - Italy Tel. +39.0395969100 - Fax +39. 0395969124 e-mail: [email protected] Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Modular Approval Request FCC ID: 2BOIL-PMR125 The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief statement) No * (a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly §15.212(a) (1)(i): No RF shielding. Due to the absence of RF shielding, the use of this module in any other host will require a Class II Permissive Change or a Change in ID followed by a Class II Permissive Change on the Grant for the new ID, for ea…

Text truncated - open the document above for the full version.