2BOIM-HM2Interactive Basketball Hoop

Huupe, Inc. | 17875 Von Karman Ave, Suite 150, Irvine, CA, 92614 | www.huupe.com ________________________________________________________________________________ May 12, 2025 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer Subject: Covered Equipment Certification Attestation Letter Applicant: Huupe Inc. FCC ID: 2BOIM-HM2 The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Matthew Yoon Title: Head of Electrical Engineering Company Name: Huupe Inc. Date: May 12, 2025

Huupe, Inc. | 17875 Von Karman Ave, Suite 150, Irvine, CA, 92614 | www.huupe.com ________________________________________________________________________________ U.S. Agent Designation for Service of Process - Certification Attestation Letter November 19, 2025 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2BOIM-HM2 Applicant FRN: 0036855229 This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent* for Service of Process for the equipment under application: U.S. Agent for Service of Process: ● Company Name: Huupe Inc ● Physical U.S. Company Address: 17875 Von Karman Ave, Suite 150, Irvine, CA 92614 ● Agent Name: Matthew Yoon ● Agent Email Address: [email protected] ● Agent FRN**: 0036855229 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: ● Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. ● The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant) Signed: Signed: Printed name: Matthew Yoon Printed name: Click here to enter text. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. ** the agent does not have an FRN because they do no other business with the FCC except for acting as a US agent for service of process, and therefore are not required to have their own FRN. Huupe, Inc. | 17875 Von Karman Ave, Suite 150, Irvine, CA, 92614 | www.huupe.com ________________________________________________________________________________ Title: Head of Electrical Engineering Title: Click here to enter text. Company Name: Huupe Inc Company Name: Click here to enter text. Date: 11/20/2025 Date: Click here to enter a date. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. ** the agent does not have an FRN because they do no other business with the FCC except for acting as a US agent for service of process, and therefore are not required to have their own FRN. Matthew Yoon

Huupe, Inc. | 17875 Von Karman Ave, Suite 150, Irvine, CA, 92614 | www.huupe.com ________________________________________________________________________________ Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC and ISED Certification Application Dear Director of Certification, This letter formally appoints Spencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC and ISED Canada regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party involved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti- Drug Abuse Act of 1988 (21 U.S.C. §862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Nemko North America, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Sincerely, Dated: May 12, 2025 Agency agreement expiration date: May 12, 2026 *Up to 12 months Signed by: Matthew Yoon Signature Print name Head of Electrical Engineering Title (949) 237-2454 Huupe, Inc. | 17875 Von Karman Ave, Suite 150, Irvine, CA, 92614 | www.huupe.com ________________________________________________________________________________ Phone On behalf of: Huupe Inc Company name

Huupe, Inc. | 17875 Von Karman Ave, Suite 150, Irvine, CA, 92614 | www.huupe.com ________________________________________________________________________________ November 19, 2025 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Confidentiality – FCC FCC ID: 2BOIM-HM2 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Selection of exhibits for LTC - general Exhibit name ☒ Permanent (Long Term) Block Diagrams ☒ Permanent (Long Term) Operation Description / Theory of Operation ☒ Permanent (Long Term) Parts List & Placement / BOM ☒ Permanent (Long Term) Schematics We also request the exhibits selected below as short term confidential (STC) be withheld from public view for a period of 180 days 1 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public: Selection of exhibits for STC 2 Exhibit name ☒Short Term User’s Manual ☒ Short Term Internal Photos ☒ Short Term External Photos ☒ Short Term Test Setup Photos Our company has spent a substantial effort in developing this product and it is one of the first of its kind in the industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. 2 - Any exhibits that may have already been requested to have “Permanent” confidentiality need not be repeated under Short-Term confidentiality request. 1 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. Huupe, Inc. | 17875 Von Karman Ave, Suite 150, Irvine, CA, 92614 | www.huupe.com ________________________________________________________________________________ The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed by: Matthew Yoon Signature Print name Head of Electrical Engineering Title (949) 237-2454 Phone Huupe Inc. Company 17875 Von Karman Ave, Suite 150, Irvine, CA, 92614 Address

Notes: 1.MATERIAL: USE BLACK WHITE LABEL 135890-1 AND PRINTED WITH BLACK INK. 2.ALL FONTS ON THE LABEL MUST BE LEGIBLE, WITH A MINIMUM FONT SIZE OF 2.5mm 440-00005_REV01 Model: HM2 FCC ID: 2BOIM-HM2 Contains FCC ID: XMR202210FC900E IC: 33905-HM2 Contains IC: 10224A-2022FC900E Input: 100-240V~0.8A 50/60Hz Output: 12V⎓2.5A (USB PD), 9V⎓3A (USB PD) SN: HMCXXXXXXXXX

Label design:

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The test results included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. FCC and ISED RSS-102– MPE Calculation; Date: June 2025 RF Exposure Compliance – MPE Calculation Report C h o o s e S c a n d i n a v i a n t r u s t Applicant information: Huupe, Inc Product information: Model number (HVIN): HM2 Model name (PMN): HM2 Product type: Mobile or Fixed Device Device category Consumer Device for General Population/Uncontrolled Exposure FCC Identification: FCC ID: 2BOIM-HM2, (Contains 2BOIM-FC900E) ISED certification number: IC: 33905-HM2, (Contains 33905-FC900E) Date of issue: November 24, 2025 Compliance Specifications: FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310 FCC 47 CFR Part 2 Subpart J, §§2.1091, 2.1093 FCC KDB 447498 D01 General RF Exposure Guidance v06 FCC KDB 865664 D01 RF Exposure Procedures and Equipment Authorization Policies ISED Canada RSS-102 Issue 6 December 15, 2023 MPE calculation report Product info: FCC ID: 2BOIM-HM2 IC: 33905-HM2 Model: HM2 Page 2 of 7 Test locations of Nemko Canada Inc. Ottawa site Montréal site GTA Cambridge site Facility address 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier - FCC CA2040 CA2041 CA0101 Test site identifier – ISED Canada 2040A-4 2040G-5 24676 ANAB File Number AT-3195 AT-3193 AT-3194 Andrey Adelberg Senior EMC/Wireless Specialist Prepared by Signature Limits of responsibility The results presented in this report apply solely to the specific device model tested and are valid only for the operating conditions and installation requirements specified herein. Testing was conducted in accordance with ISO/IEC 17025:2017 requirements, and all results fall within the scope of Nemko Canada's accreditation. This MPE evaluation is based on the maximum power levels and operating conditions specified. Any modifications to the device hardware, software, or installation that could affect RF output power or antenna characteristics may invalidate this compliance demonstration. Copyright notification This report may be reproduced by the applicant in its entirety for regulatory submission and internal use. Any use of this report by third parties, including reliance on its contents or decisions made based on it, is solely at the risk of those third parties. Nemko Canada Inc. assumes no responsibility for any damages incurred by third parties as a result of actions taken based on this report. © Nemko Canada Inc. All rights reserved. MPE calculation report Product info: FCC ID: 2BOIM-HM2 IC: 33905-HM2 Model: HM2 Page 3 of 7 1. Executive Summary This report presents the Maximum Permissible Exposure (MPE) analysis for [Product Name] to demonstrate compliance with FCC and ISED RF exposure requirements. The evaluation considers both single transmitter operation and simultaneous multi-transmitter scenarios where applicable. 2. Key Findings Compliance status Complies Critical separation distances 20 cm Special conditions or limitations N/A MPE calculation report Product info: FCC ID: 2BOIM-HM2 IC: 33905-HM2 Model: HM2 Page 4 of 7 MPE calculations for simultaneous transmission Device Classification Requirements Portable Device Definition (§2.1093) Devices designed for use by a person where the radiating structure is within 20 cm of the user's body require SAR evaluation rather than MPE calculation. Mobile Device Definition Devices installed in vehicles or with permanently installed antennas may use MPE calculations if minimum separation distances can be established. Fixed/Base Station Definition Stationary transmitters with controlled access to antenna locations may use MPE calculations for both occupational and general population exposure scenarios. 3. References, definitions and limits for FCC FCC §2.1091(d) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1: §1.1310(e)(1)—Power Density Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 *(100) ≤6 3.0–30 *(900 / f 2 ) <6 30–300 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 *(100) <30 1.34–30 *(180 / f 2 ) <30 30–300 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. MPE calculation report Product info: FCC ID: 2BOIM-HM2 IC: 33905-HM2 Model: HM2 Page 5 of 7 4. References, definitions and limits for ISED RSS-102 Section 5.3.2 The power density reference levels, and associated reference period for devices employed by the general public (uncontrolled environment) and controlled-use devices (controlled environment) are specified in table below. Note that the power density limits specified in this table apply to whole body exposure conditions. Table 2: RSS-102— Power density limits Frequency range (MHz) Power density (W/m 2 ) Power density (mW/cm 2 ) Reference Period (minutes) Limits for controlled-use devices (controlled environment) 10–20 10 1 6 20–48 44.72 / ƒ 0.5 4.472 / …

Text truncated - open the document above for the full version.

Please read the Important Notice and Warnings at the end of this document www.infineon.com page 1 of 45 2021-01-08 BGT60TR13C E6327 BGT60TR13C 6 0 GH z R a d a r S e n s o r D a t a s h e e t V 2 . 4 . 6 Features  60 GHz radar sensor for FMCW operation  5.5 GHz bandwidth  Antenna-in-package (6.5 x 5.0 x 0.9 mm³)  Digital interface for chip configuration and radar data acquistion  Optimized power modes for low-power operation  Integrated state machine for independent operation Potential applications  Radar frontend for gesture sensing  High resolution FMCW radars  Short range sensing operations  Hidden sensing applications behind radome Product validation Packaged device qualified according to JEDEC 20/22. Description The BGT60TR13C, a 60 GHz radar sensor with antenna in package, enables ultra-wide bandwidth FMCW operation in a small package. Sensor configuration and data acquisition are enabled with a digital interface and the integrated state machine enables independent data acquisition with power mode optimization for lowest power consumption. V2.4.6 2 of 45 2021-01-08 BGT60TR13C 60 GHz Radar Sensor Table of contents Table of contents Table of contents ............................................................................................................................ 2 1 Introduction .......................................................................................................................... 3 1.1 Product Overview .................................................................................................................................... 3 1.2 Potential Applications ............................................................................................................................. 3 1.3 BGT60TR13C Bare Die Block Diagram .................................................................................................... 4 1.4 BGT60TR13C Pin Definition and Function .............................................................................................. 5 1.4.1 IO and Supply Pins ............................................................................................................................. 6 1.5 BGT60TR13C Functional Block Diagram ................................................................................................ 7 2 General Product Specification ................................................................................................. 9 2.1 Absolute Maximum Ratings .................................................................................................................... 9 2.2 Range of Functionality ............................................................................................................................ 9 2.3 Current Consumption ........................................................................................................................... 10 2.4 ESD Integrity .......................................................................................................................................... 12 2.5 Thermal Resistance ............................................................................................................................... 13 2.6 Product Validation ................................................................................................................................ 13 3 BGT60TR13C Registers ........................................................................................................... 14 3.1 Register List ........................................................................................................................................... 14 3.1.1 Abbreviations ................................................................................................................................... 16 3.2 CHIP_ID .................................................................................................................................................. 16 3.3 STAT1 - Status Register1 ....................................................................................................................... 17 3.4 SFCTL – SPI and FIFO Control Register ................................................................................................. 18 3.5 STAT0 - Status Register 0 ...................................................................................................................... 19 3.6 FSTAT - FIFO Status Register ................................................................................................................. 20 3.7 GSR0 - Global Status Register ............................................................................................................... 22 4 Data Organization and SPI Interface ........................................................................................ 23 4.1 Data Header ........................................................................................................................................... 23 4.2 FIFO and Dataflow ................................................................................................................................. 24 4.3 SPI – Serial Peripheral Interface Module .............................................................................................. 25 4.3.1 Standard SPI Timing ........................................................................................................................ 26 4.3.2 Logic Levels ...................................................................................................................................... 28 4.4 Overshoot and Undershoot Waveform Definition ............................................................................... 32 4.5 IBIS Model .............................................................................................................................................. 32 4.6 SPI Functionality .............................................…

Text truncated - open the document above for the full version.

Antenna YF0027AA Datasheet Antenna Services Version: 1.1 Date: 2021-11-30 Status: Released Antenna Services YF0027AA Datasheet Antenna_Datasheet 1 / 12 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Use and Disclosure Restrictions License Agreements Documents and information provided by us shall be kept confidential, unless specific permission is granted. They shall not be accessed or used for any purpose except as expressly provided herein. Copyright Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior written consent. We and the third party have exclusive rights over copyrighted material. No license shall be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non-exclusive, royalty-free license to use the material. We reserve the right to take legal action for noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of the material. Antenna Services YF0027AA Datasheet Antenna_Datasheet 2 / 12 Trademarks Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel or any third party in advertising, publicity, or other aspects. Third-Party Rights This document may refer to hardware, software and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials shall be governed by all restrictions and obligations applicable thereto. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing or usage of trade. Privacy Policy To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the purpose of performing the service only or as permitted by applicable laws. Before data interaction with third parties, please be informed of their privacy and data security policy. Disclaimer a) We acknowledge no liability for any injury or damage arising from the reliance upon the information. b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the information contained herein. c) While we have made every effort to ensure that the functions and features under development are free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, and exclude all liability for any loss or damage suffered in connection with the use of features and functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage may have been foreseeable. d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of information, advertising, commercial offers, products, services, and materials on third-party websites and third-party resources. Copyright © Quectel Wireless Solutions Co., Ltd. 2021. All rights reserved. Antenna Services YF0027AA Datasheet Antenna_Datasheet 3 / 12 About the Document Revision History Version Date Author Note - 2021-04-01 Kenny YIN Creation of the document 1.0 2021-04-01 Kenny YIN First official release 1.1 2021-11-30 Kenny YIN Updated the product description in Chapter 1. Antenna Services YF0027AA Datasheet Antenna_Datasheet 4 / 12 Contents About the Document ......................................................................................................................…

Text truncated - open the document above for the full version.

www.nemko.com FCC 15.255 and RSS-210.dotm, Version V1.0 Nemko USA Inc., a testing laboratory, is accredited by ANAB. The tests included in this report are within the scope of this accreditation. REP092619-3R3TRFWL Date of issue: November 24, 2025 Applicant: Huupe Product: Huupe Mini Model: Variant(s): HM2 N/A FCC ID: 2BOIM-HM2 ISED Certification Number: 33905-HM2 Specifications:  FCC 47 CFR Part 15, Subpart C – §15.255 Operation within the band 57-71 GHz  RSS-210, Issue 11 (June 2024) Annex J: Devices operating in the band 57-71 GHz Test report Report reference ID: REP092619-3R3TRFWL Page 2 of 27 Lab and test locations Company name Nemko USA Inc. Address 2210 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com FCC Site Number Test Firm Registration Number: 392943; Designation Number: US5058 ISED Test Site 2040B-3 Tested by Chenhao Ma, Wireless Test Technician Reviewed by James Cunningham, EMC/WL Manager Review date November 24, 2025 Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko USA Inc. Report r…

Text truncated - open the document above for the full version.