2BOS3-M95Dash Cam

Dash Cam USER MANUAL Always read the user manual carefully before using the device and keep it for future reference. Images shown in the user guide are for illustrative purposes only and may differ from the actual product. NOTES 1. If the product has abnormal situations such as machine shell cracking, wire breakage, etc., please stop using the dashcam immediately and contact the company's customer service. 2. If you need to clean, please use a soft cloth to wipe gently, do not use any chemicals for cleaning. 3. Please do not be in a humid, flammable and explosive, corrosive gas or liquid environment. 4. Do not unplug the TF card during the recording process. LAYOUT OF THE BUTTONS AND PARTS (1) Power access hole The Type-C USB plug of the power cord is plugged in from this hole and the other end is connected to the car power supply. (2) TF card slot The card is inserted from here. The system requires the use of C10 or higher TF card, otherwise it will cause problems such as no boot, no recording, and operation failure. Maximum support 256GB TF card. (3) Microphone/MIC Built-in miniature microphone, which can record sound synchronously with the video, and turn on/off through the [Video Recording] option of the mobile APP. (4) Power switch Short press to turn off the screen display; long press to power off/on. (5) Rear lens Slot If equipped with a car rearview camera, you need to insert the headset connector into this hole on the connection line. (6) Menu Key While recording: Press once to lock the current video to prevent it from being overwritten in loop recording. While recording is Paused: Short press this button to enter the system settings menu. The functions of each button are displayed at the bottom of the screen—operate accordingly. (7) Photo Key Press once to capture a photo. (8) Switch Key Press to switch between different camera views while recording. (9) Record Key Press to Start/stop recording. In the system settings and detailed settings screens, the button functions are as shown at the bottom of the display. Back Key : Go back one step until exiting the system settings menu. Up Key : Move the selection left in the function list. Page Key : Turn pages left or right in the function list. In screens without page numbers, this functions as the Power key. Down Key : Move the selection right in the function list. Confirm Key : After adjusting parameters, press to save and exit the current item. In date/time settings, used to confirm and jump to the next item. SETTINGS OVERVIEW When recording normally, press the (6) menu key to enter the settings screen. Use the key to move the selected item, the order is from top left to bottom right. When the first row ends, it jumps directly to the first icon of the second row. Use key to go back to the previous selected item. Press the third button ( ) to go directly to the next page. File Browsing Used for video playback. Due to factors such as system architecture, the video playback operations for the four categories here are the same. To avoid dragging out the content, we will use the front camera video as an example for the introduction. Press the key to select 'Front camera files', and press the key to enter. Keep selecting 'Regular Video' and press the key to enter the video list. After selecting the video, press the key to enter the playback interface, and press the key again to start playing. During playback, you can press the key at any time to pause, and press it again to continue playing. You can also directly press the key to play the next video segment. On the playback screen, press the key to delete the current video. If you do not want to delete it, press the key to close the dialog box. Move Mode Used to set and adjust video recording resolution; currently supports up to 4K (3840×2160). Use the key to move the selection, press the key to confirm, and press the key to go back. Move Clip Time This device operates on a looping recording system, where the newest video files automatically overwrite the oldest ones, and this cycle repeats indefinitely. This setting is used to configure the duration of each video file. Use the key to move the selection, press the key to confirm, and press the key to go back. LCD Power Save Set the wait time before the screen automatically turns off here. After the screen turns off, press any key to turn it back on. Use the key to move the selection, press the key to confirm, and press the key to go back. Clock Settings This feature is used to manually set the date and time. The date and time are displayed at the bottom of each video frame. Use the key to move the selection, press the key to confirm, and press the key to go back. Date Format Used to set the display format for the date and time. There are three formats to choose from: “Year-Month-Day,” “Year-Month-Day,” and “Month-Day-Year.” Use the key to move the selection, press the key to confirm, and press the key to go back. Microphone The device has a built-in miniature microphone, which is enabled by default. It is used to record audio simultaneously while recording video. Use the key to move the selection, press the key to confirm, and press the key to go back. Flicker Adjust the screen's refresh rate as needed. Use the key to move the selection, press the key to confirm, and press the key to go back. SECOND PAGE OF THE SCREEN EV This is exposure compensation, which is used to adjust the exposure of the video. If you think the video is too bright, you can reduce the exposure value here. Use the key to increase or decrease the exposure value, press the key to confirm, and press the key to go back. Language This device supports multiple languages, including 简体中文(Simplified Chinese), 繁體中文(Traditional Chinese), English(English), Русский(Russian), 한국어(Korean), 日本語(Japanese), Tiế ng Viế t(Vietnamese), ภาษาไทย(Thai), Deutsch(German), Italiano(Italian), Français(French), and (Arabic)العربية. When connected to the device via the FinalCamX mobile app, up …

Text truncated - open the document above for the full version.

FCC ID:2BOS3-M95 FCC ID:2BOS3-M95 FCC ID:2BOS3-M95 FCC ID:2BOS3-M95 FCC ID:2BOS3-M95 FCC ID:2BOS3-M95 FCC ID:2BOS3-M95 FCC ID:2BOS3-M95 FCC ID:2BOS3-M95

FCC ID:2BOS3-M95 Test Setup Photos of the EUT

34 11N20SISO_Ant1_2412_0~Reference 11N20SISO_Ant1_2412_30~1000 35 11N20SISO_Ant1_2412_1000~26500 11N20SISO_Ant1_2437_0~Reference 11N20SISO_Ant1_2437_30~1000 36 11N20SISO_Ant1_2437_1000~26500 11N20SISO_Ant1_2462_0~Reference 37 11N20SISO_Ant1_2462_30~1000 11N20SISO_Ant1_2462_1000~26500 11N40SISO_Ant1_2422_0~Reference 38 11N40SISO_Ant1_2422_30~1000 11N40SISO_Ant1_2422_1000~26500 39 11N40SISO_Ant1_2437_0~Reference 11N40SISO_Ant1_2437_30~1000 11N40SISO_Ant1_2437_1000~26500 40 11N40SISO_Ant1_2452_0~Reference 11N40SISO_Ant1_2452_30~1000 41 11N40SISO_Ant1_2452_1000~26500 42 Appendix G: Duty Cycle Test Result TestMode Antenna Frequency[MHz] Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] DC Factor [dB] T Factor [dB] 11B Ant1 2412 1.31 1.41 92.91 0.32 0.76 2437 1.30 1.45 89.66 0.47 0.77 2462 1.31 1.35 97.04 0.13 0.76 11G Ant1 2412 2.06 2.12 97.17 0.12 0.49 2437 2.06 2.14 96.26 0.17 0.49 2462 2.07 2.23 92.83 0.32 0.48 11N20SISO Ant1 2412 1.92 1.97 97.46 0.11 0.52 2437 1.92 2.07 92.75 0.33 0.52 2462 1.92 2.08 92.31 0.35 0.52 11N40SISO Ant1 2422 0.13 0.29 44.83 3.48 7.69 2437 0.13 0.29 44.83 3.48 7.69 2452 0.13 0.30 43.33 3.63 7.69 43 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 44 11G_Ant1_2412 11G_Ant1_2437 45 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 46 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 47 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 48 Appendix H: Emissions in Restricted Bands Test Result TestMod e Antenn a ChNam e Frequen cy[MHz] Detector Freq [MHz] Result [dBm] Gain [dB] DC Factor [dB] Result [dBuV/m] Limit [dBuV/m] Verdict 11B Ant1 Low 2412 AV 2310.000 -60.07 2.00 0.32 37.45 ≤54 PASS AV 2387.100 -58.6 2.00 0.32 38.92 ≤54 PASS AV 2390.000 -59.31 2.00 0.32 38.21 ≤54 PASS Peak 2310.000 -50.85 2.00 0.00 46.35 ≤74 PASS Peak 2376.700 -48.9 2.00 0.00 48.30 ≤74 PASS Peak 2390.000 -51.11 2.00 0.00 46.09 ≤74 PASS High 2462 AV 2483.500 -59.32 2.00 0.13 38.01 ≤54 PASS AV 2488.620 -58.6 2.00 0.13 38.73 ≤54 PASS AV 2500.000 -59.5 2.00 0.13 37.83 ≤54 PASS Peak 2483.500 -51.33 2.00 0.00 45.87 ≤74 PASS Peak 2487.630 -48.34 2.00 0.00 48.86 ≤74 PASS Peak 2500.000 -51.79 2.00 0.00 45.41 ≤74 PASS 11G Ant1 Low 2412 AV 2310.000 -60.58 2.00 0.12 36.74 ≤54 PASS AV 2389.960 -56.4 2.00 0.12 40.92 ≤54 PASS AV 2390.000 -56.4 2.00 0.12 40.92 ≤54 PASS Peak 2310.000 -53.08 2.00 0.00 44.12 ≤74 PASS Peak 2389.050 -45.48 2.00 0.00 51.72 ≤74 PASS Peak 2390.000 -47.33 2.00 0.00 49.87 ≤74 PASS High 2462 AV 2483.500 -53.92 2.00 0.32 43.60 ≤54 PASS AV 2483.560 -52.21 2.00 0.32 45.31 ≤54 PASS AV 2500.000 -58.79 2.00 0.32 38.73 ≤54 PASS Peak 2483.500 -43.52 2.00 0.00 53.68 ≤74 PASS Peak 2484.880 -41.42 2.00 0.00 55.78 ≤74 PASS Peak 2500.000 -51.45 2.00 0.00 45.75 ≤74 PASS 11N20SI SO Ant1 Low 2412 AV 2310.000 -59.07 2.00 0.11 38.24 ≤54 PASS AV 2389.440 -57.44 2.00 0.11 39.87 ≤54 PASS AV 2390.000 -57.74 2.00 0.11 39.57 ≤54 PASS Peak 2310.000 -52.19 2.00 0.00 45.01 ≤74 PASS Peak 2375.270 -47.73 2.00 0.00 49.47 ≤74 PASS Peak 2390.000 -49.73 2.00 0.00 47.47 ≤74 PASS High 2462 AV 2483.500 -58.48 2.00 0.35 39.07 ≤54 PASS AV 2484.440 -57.96 2.00 0.35 39.59 ≤54 PASS AV 2500.000 -59.07 2.00 0.35 38.48 ≤54 PASS Peak 2483.500 -50.89 2.00 0.00 46.31 ≤74 PASS Peak 2483.670 -48.06 2.00 0.00 49.14 ≤74 PASS Peak 2500.000 -51.01 2.00 0.00 46.19 ≤74 PASS 49 11N40SI SO Ant1 Low 2422 AV 2310.000 -59.85 2.00 3.48 40.83 ≤54 PASS AV 2389.250 -57.01 2.00 3.48 43.67 ≤54 PASS AV 2390.000 -58.16 2.00 3.48 42.52 ≤54 PASS Peak 2310.000 -51.8 2.00 0.00 45.40 ≤74 PASS Peak 2384.900 -45.62 2.00 0.00 51.58 ≤74 PASS Peak 2390.000 -47.68 2.00 0.00 49.52 ≤74 PASS High 2452 AV 2483.500 -58.52 2.00 3.63 42.31 ≤54 PASS AV 2483.750 -58.05 2.00 3.63 42.78 ≤54 PASS AV 2500.000 -59.48 2.00 3.63 41.35 ≤54 PASS Peak 2483.500 -50.21 2.00 0.00 46.99 ≤74 PASS Peak 2485.500 -46.81 2.00 0.00 50.39 ≤74 PASS Peak 2500.000 -51.04 2.00 0.00 46.16 ≤74 PASS Note： 1. The limit in dBm for average detector is conversion from 54dBuV/m, according to 15.209(a). The limit in dBm for peak detector is 20dB above the limit of average detector in dBm. 50 Test Graphs 11B_Ant1_Low_2412_AV 11B_Ant1_Low_2412_Peak 11B_Ant1_High_2462_AV 51 11B_Ant1_High_2462_Peak 11G_Ant1_Low_2412_AV 52 11G_Ant1_Low_2412_Peak 11G_Ant1_High_2462_AV 11G_Ant1_High_2462_Peak 53 11N20SISO_Ant1_Low_2412_AV 11N20SISO_Ant1_Low_2412_Peak 54 11N20SISO_Ant1_High_2462_AV 11N20SISO_Ant1_High_2462_Peak 11N40SISO_Ant1_Low_2422_AV 55 11N40SISO_Ant1_Low_2422_Peak 11N40SISO_Ant1_High_2452_AV 56 11N40SISO_Ant1_High_2452_Peak

1 FCC Appendix RF Test Data for 2.4GWIFI FCC ID : 2BOS3-M95 Company : Shenzhen ROSOTO Technology Co., Ltd. EUT : Dash Cam Model Number : M95 Report No. : CTA26072201901 Reviewed By : Eric Wang 2 Appendix A: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 8.800 2407.400 2416.200 0.5 PASS 2437 8.040 2433.160 2441.200 0.5 PASS 2462 8.640 2457.880 2466.520 0.5 PASS 11G Ant1 2412 16.520 2403.760 2420.280 0.5 PASS 2437 16.400 2428.840 2445.240 0.5 PASS 2462 16.360 2453.880 2470.240 0.5 PASS 11N20SISO Ant1 2412 17.600 2403.240 2420.840 0.5 PASS 2437 17.640 2428.240 2445.880 0.5 PASS 2462 17.560 2453.280 2470.840 0.5 PASS 11N40SISO Ant1 2422 36.320 2403.920 2440.240 0.5 PASS 2437 36.080 2419.080 2455.160 0.5 PASS 2452 36.160 2433.920 2470.080 0.5 PASS 3 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 4 11G_Ant1_2412 11G_Ant1_2437 5 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 6 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 7 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 8 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Channel Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 13.380 2405.3087 2418.6887 --- --- 2437 13.363 2430.3384 2443.7014 --- --- 2462 13.335 2455.3378 2468.6728 --- --- 11G Ant1 2412 17.258 2403.3675 2420.6255 --- --- 2437 17.062 2428.5196 2445.5816 --- --- 2462 17.173 2453.4081 2470.5811 --- --- 11N20SISO Ant1 2412 18.128 2402.9594 2421.0874 --- --- 2437 18.122 2427.9586 2446.0806 --- --- 2462 18.090 2452.9861 2471.0761 --- --- 11N40SISO Ant1 2422 36.433 2403.8590 2440.2920 --- --- 2437 36.381 2418.8758 2455.2568 --- --- 2452 36.470 2433.7880 2470.2580 --- --- 9 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 10 11G_Ant1_2412 11G_Ant1_2437 11 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 12 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 13 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 14 Appendix C: Maximum conducted output power Test Result Test Mode Antenna Frequency[M Hz] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 13.36 ≤30.00 PASS 2437 12.68 ≤30.00 PASS 2462 11.62 ≤30.00 PASS 11G Ant1 2412 11.53 ≤30.00 PASS 2437 10.96 ≤30.00 PASS 2462 10.93 ≤30.00 PASS 11N20SISO Ant1 2412 12.49 ≤30.00 PASS 2437 11.71 ≤30.00 PASS 2462 10.47 ≤30.00 PASS 11N40SISO Ant1 2422 12.39 ≤30.00 PASS 2437 12.00 ≤30.00 PASS 2452 11.48 ≤30.00 PASS 15 Appendix D: Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -15.07 ≤8.00 PASS 2437 -15.51 ≤8.00 PASS 2462 -16.04 ≤8.00 PASS 11G Ant1 2412 -20.39 ≤8.00 PASS 2437 -21.13 ≤8.00 PASS 2462 -19.95 ≤8.00 PASS 11N20SISO Ant1 2412 -18.74 ≤8.00 PASS 2437 -20.57 ≤8.00 PASS 2462 -22.30 ≤8.00 PASS 11N40SISO Ant1 2422 -23.61 ≤8.00 PASS 2437 -23.40 ≤8.00 PASS 2452 -24.78 ≤8.00 PASS 16 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 17 11G_Ant1_2412 11G_Ant1_2437 18 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 19 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 20 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 21 Appendix E: Band edge measurements Test Result TestMode Antenn a ChNam e Frequency[MH z] RefLevel[dB m] Result[dB m] Limit[dBm ] Verdic t 11B Ant1 Low 2412 -0.36 -49.1 ≤-20.36 PASS High 2462 -2.03 -57.52 ≤-22.03 PASS 11G Ant1 Low 2412 -6.67 -44.04 ≤-26.67 PASS High 2462 -7.78 -54.45 ≤-27.78 PASS 11N20SIS O Ant1 Low 2412 -6.66 -44.77 ≤-26.66 PASS High 2462 -8.08 -57.6 ≤-28.08 PASS 11N40SIS O Ant1 Low 2422 -7.97 -44.94 ≤-27.97 PASS High 2452 -8.97 -56.97 ≤-28.97 PASS 22 Test Graphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 23 11G_Ant1_High_2462 11N20SISO_Ant1_Low_2412 24 11N20SISO_Ant1_High_2462 11N40SISO_Ant1_Low_2422 11N40SISO_Ant1_High_2452 25 26 Appendix F: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 Reference -1.15 -1.15 --- PASS 30~1000 -1.15 -68.75 ≤-21.15 PASS 1000~26500 -1.15 -46.22 ≤-21.15 PASS 2437 Reference -2.15 -2.15 --- PASS 30~1000 -2.15 -68.55 ≤-22.15 PASS 1000~26500 -2.15 -46.42 ≤-22.15 PASS 2462 Reference -3.73 -3.73 --- PASS 30~1000 -3.73 -68.03 ≤-23.73 PASS 1000~26500 -3.73 -46.07 ≤-23.73 PASS 11G Ant1 2412 Reference -10.41 -10.41 --- PASS 30~1000 -10.41 -67.6 ≤-30.41 PASS 1000~26500 -10.41 -46.14 ≤-30.41 PASS 2437 Reference -7.45 -7.45 --- PASS 30~1000 -7.45 -66.11 ≤-27.45 PASS 1000~26500 -7.45 -47.01 ≤-27.45 PASS 2462 Reference -10.54 -10.54 --- PASS 30~1000 -10.54 -67.44 ≤-30.54 PASS 1000~26500 -10.54 -46.93 ≤-30.54 PASS 11N20SISO Ant1 2412 Reference -6.62 -6.62 --- PASS 30~1000 -6.62 -66.02 ≤-26.62 PASS 1000~26500 -6.62 -46.79 ≤-26.62 PASS 2437 Reference -9.98 -9.98 --- PASS 30~1000 -9.98 -66.51 ≤-29.98 PASS 1000~26500 -9.98 -47.08 ≤-29.98 PASS 2462 Reference -9.02 -9.02 --- PASS 30~1000 -9.02 -66.84 ≤-29.02 PASS 1000~26500 -9.02 -46.53 ≤-29.02 PASS 11N40SISO Ant1 2422 Reference -8.82 -8.82 --- PASS 30~1000 -8.82 -66 ≤-28.82 PASS 1000~26500 -8.82 -46.92 ≤-28.82 PASS 2437 Reference -8.93 -8.93 --- PASS 30~1000 -8.93 -65.19 ≤-28.93 PASS 1000~26500 -8.93 -46.3 ≤-28.93 PASS 2452 Reference -9.77 -9.77 --- PASS 30~1000 -9.77 -65.77 ≤-29.77 PASS 1000~26500 -9.77 -47.12 ≤-29.77 PASS 27 Test Graphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 28 11B_Ant1_2437_0~Reference 11B_Ant1_2437_30~1000 29 11B_Ant1_2437_1000~26500 11B_Ant1_2462_0~Reference 11B_Ant1_2462_30~1000 30 11B_Ant1_2462_1000~26500 11G_Ant1_2412_0~Reference 31 11G_Ant1_2412_30~1000 11G_Ant1_2412_1000~26500 11G_Ant1_2437_0~Reference 32 11G_Ant1_2437_30~1000 11G_Ant1_2437_1000~26500 33 11G_Ant1_2462_0~Reference 11G_Ant1_2462_30~1000 11G_Ant1_2462_1000~26500

Report No.: CTA26072201901 Page 45 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 46 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 47 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 48 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 49 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 50 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 51 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 52 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 53 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 54 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 55 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 56 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA26072201901 Page 57 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn ********************** End of Report **********************

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. .......................................... : CTA26072201901 2BOS3-M95 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Aug. 07, 2026 Testing Laboratory Name ............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ........................... : Shenzhen ROSOTO Technology Co., Ltd. Address ............................................ : 2F,Building A&E,Debaoli Industrial Park,Shangxue Technology Zone,Xinxue Community,Bantian Subdistrict,Longgang, Shenzhen, Guangdong,China Test specification.......................... : Standard .......................................... : FCC Part 15.247 TRF Originator ................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Dash Cam Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen ROSOTO Technology Co., Ltd. Model/Type reference ...................... : M95 Listed Models ................................... : A207, A226, A213, A215, A211, A223, A227, A226, A228, A6702, A6703, A6705, A6706, A6709, A6718, A6711, A602, A313, A400, A512 Modulation Type .............................. : CCK/DSSS/OFDM Operation Frequency ....................... : From 2412 - 2462MHz Rating ............................................... : Input: 5V2.5A Result ............................................... : PASS Report No.: CTA26072201901 Page 2 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Dash Cam Model /Type : M95 Listed Models : A207, A226, A213, A215, A211, A223, A227, A226, A228, A6702, A6703, A6705, A6706, A6709, A6718, A6711, A602, A313, A400, A512 Model difference : The PCB board, circuit, structure and internal of these models are the same, only model number and colour are different for these models.So the tests were performed on model M95 and the difference tests were performed on listed Models. Applicant : Shenzhen ROSOTO Technology Co., Ltd. Address : 2F,Building A&E,Debaoli Industrial Park,Shangxue Technology Zone,Xinxue Community,Bantian Subdistrict,Longgang, Shenzhen, Guangdong,China Manufacturer : Shenzhen ROSOTO Technology Co., Ltd. Address : 2F,Building A&E,Debaoli Industrial Park,Shangxue Technology Zone,Xinxue Community,Bantian Subdistrict,Longgang, Shenzhen, Guangdong,China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26072201901 Page 3 of 57 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ...................................................................................................................................... 4 2 SUMMARY .................................................................................................................................................... 5 2.1 General Remarks .............................................................................................................................. 5 2.2 Product Description ........................................................................................................................... 5 2.3 Equipment Under Test ....................................................................................................................... 5 2.4 Short description of the Equipment under Test (EUT) ...................................................................... 5 2.5 EUT configuration .............................................................................................................................. 6 2.6 EUT operation mode ......................................................................................................................... 6 2.7 Block Diagram of Test Setup ............................................................................................................. 6 2.8 Related Submittal(s) / Grant (s) ......................................................................................................... 6 2.9 Modifications ...................................................................................................................................... 6 3 TEST EN…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type PCB antenna Model M95 Frequency range 2400-2500MHz Manufacturer Shenzhen ROSOTO Technology Co., Ltd. Address 2F,Building A&E,Debaoli Industrial Park,Shangxue Technology Zone,Xinxue Community,Bantian Subdistrict,Longgang, Shenzhen, Guangdong,China ANT Peak Gain 1.0 dBi 2. Antenna Photo: 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn RF Exposure MPE Report Reference No. ..................... : FCC ID............................................. : CTA26072201902 2BOS3-M95 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Aug. 07, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ............................ : Shenzhen ROSOTO Technology Co., Ltd. Address............................................ : 2F,Building A&E,Debaoli Industrial Park,Shangxue Technology Zone,Xinxue Community,Bantian Subdistrict,Longgang, Shenzhen, Guangdong,China Standard ........................................... : 47CFR §1.1310 47CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Dash Cam Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen ROSOTO Technology Co., Ltd. Model/Type reference ...................... : M95 Listed Models ................................... : A207, A226, A213, A215, A211, A223, A227, A226, A228, A6702, A6703, A6705, A6706, A6709, A6718, A6711, A602, A313, A400, A512 Rating ............................................... : Input: 5V2.5A Result ............................................... : PASS Report No.: CTA26072201902 Page 2 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Dash Cam Model /Type : M95 Listed Models : A207, A226, A213, A215, A211, A223, A227, A226, A228, A6702, A6703, A6705, A6706, A6709, A6718, A6711, A602, A313, A400, A512 Model difference : The PCB board, circuit, structure and internal of these models are the same, only model number and colour are different for these models.So the tests were performed on model M95 and the difference tests were performed on listed Models. Applicant : Shenzhen ROSOTO Technology Co., Ltd. Address : 2F,Building A&E,Debaoli Industrial Park,Shangxue Technology Zone,Xinxue Community,Bantian Subdistrict,Longgang, Shenzhen, Guangdong,China Manufacturer : Shenzhen ROSOTO T…

Text truncated - open the document above for the full version.